2003 Honda CR85r Rebuild Part 1 || Wheels, Tires, Brakes & Bath
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Welcome back to the channel everyone and thanks for taking the time to swing by again! If this is your first time visiting, join the community and Subscribe & hit the Alert Bell to get notified of future updates like everyone else!
Got a new series going now. In todays new series "2003 Honda CR85r Rebuild Part 1" We tackle pulling the old wheels and fitting the new rims from a CRF150, get the tires on, repair the rear brakes and give her a quick before an after of the first bath this bike has gotten in a while.
So Check the Video out... Stay tuned by Subscribing for more and watch me rebuild this bike for my daughter!
Please consider SUBSCRIBING, Hitting the ALERT BELL, LIKING the video as well as making any COMMENTS, asking questions or giving friendly advice to improve my channel content in the comments section. DON'T FORGET TO SHARE with friends & family on social media that you think might get a kick out of this video and others on the channel.
WE HIT 1700 Subscribers!!!!! SO AWESOME!!! Thanks for all of the support from current Subscribers! You guys Rock! Lets get this channel rockin Ya'll! Share, Share, Share!!!
I'm learning and practicing skills from these two great channels below. Check them out. Great Teachers!
-AJ Catanzaro TH-cam Channel:
/ @ajcatanzaro
-Tyler @ MX Factory TH-cam Channel:
/ @themxfactory
Thanks a TON for all of the recent Subscribers, You Guys and Gals ROCK!!!
Parts:
1. All Balls Wheel Bearing & Seal kit: www.rockymount...
2. Tusk Impact Frt/Rr Wheel/ Hub Kit (17"/14"): www.ebay.com/i...
3. MAGNUM MX Dirt Tires: magnumridersupp...
4. Frienda Tail Pipe Muffler Plug: www.amazon.com...
5. Simple Green 1 Gal Concentrated Cleaner: www.amazon.com...
6. Kawasaki Electric Pressure Washer: www.amazon.com...
Here are some things I used in the making of this video...
1. Harbor Freight Dirt Dike Stand: www.harborfrei...
2. GoPro Hero 7: gopro.com/en/u...
3. Dango Designs GoPro Gripper Chin Mount:
www.amazon.com...
4. Rechargeable Portable Battery Bank (Similar): www.amazon.com...
5. Smart Phone TriPod: www.amazon.com...
6. Smart Phone Tripod TALL: www.amazon.com...
7. Wireless Lapel Mic: www.amazon.com...
Thanks Again! See you in the next video!
Andrew C.
![03 Honda CR85r Rebuild Part 2 || Engine Teardown [Water Pump Madness]](http://i.ytimg.com/vi/smsGvz_N5NE/mqdefault.jpg)
I need a plastic bolt kit mines is a 2004 Honda cr85, will any honda bolt kit work?
For the most part. But they are just basic track packs. So most of the bolt should work fine and look great.
What did you have to do to get rear 150 wheel on just bought a set there for my cr85 and noticed on the crf wheel the axle is slightly bigger
Gotta get the right bearings, inner tube, collars and axle.
Picking up the suspension for my 1990 RM80 tomorrow. Going to run it at Dux then really rebuild it over the winter.
Nice! You got the suspension rebuilt? What'd it cost you?
@@Fixin2Ride-Official- TDC Racing did all 3 for $550. Was all bushings and seals. No springs or revalue.
Gotcha. Thanks. Im thinking of getting a revalve and apring for mine.
Where can I buy all those parts especially those of the caliper
You can try Rocky Mountain ATV or Babbitt's online. And whatever you can't find their you just going to have to find on eBay or through a local Parts guy or purchase a parts bike
Check out the 3rd part of this 2003 Honda CR85r Rebuild series here...th-cam.com/video/qV0CoXZsFss/w-d-xo.html
Check out part 2 of this 03 Honda CR85r rebuild series! th-cam.com/video/smsGvz_N5NE/w-d-xo.html
when you washed the bike did your spark plug ignition coil and all those components go bad ? i’m debating if i should wash my bike the way you did it or remove the electric components. thoughts ?
Sorry I didn't see this I responded to the other one. So the most common no spark causing issue after you wash your bike is the stop button so just disconnect it and blow it out compressed air and maybe use a warm hair dryer on it for a few minutes to evaporate any water left and then put it back see if it starts that usually will do it
@@Fixin2Ride-Official- all good man thank you for taking the time to answer both them , when you say the stop bottom are you referring to the kill switch ??
Yeah that's the Killswitch yep so pop that off and you some compressed air on it and then hair dryer that should get all the moisture out and you should have spark again. You can even unplug it or just unplug one terminal because all it does is ground out the spark coil, and if you unplug one of them that will break the connection being that water is creating a connection inside the button and you should have spark if that's the problem
@@Fixin2Ride-Official- awesome thanks man , also one last question did you use a power washer or just a garden hose ? what type of aluminum spray did you use to clean up the frame??
I typically use a pressure washer. And then you can get some red scratch bright and aluminum wheel cleaner and that will help to clean it up
Its sled time bud dirtbikes are over 😁
No no nooooo. Still can ride dirt bikes through until December around here. Lolol.
But in all seriousness. I do plan in starting seld repair videos sooner than later. As always. Got a lot to do. But right now I'm nursing my rib cage back to health. Wadded pretty bad last weekend. So trying to catch up on video editing and posting of the stuff I have from the past few weeks. This bike is actually done and my daighters taken it to the track for practice already. So that will all come next. Might throw some sled vids in here ans there though. Been thinking about. Got big plans for my 99 Thundercat 1000!!! Then will have some more atv stuff then sleds, sleds, sleds! 🤜💥🤛
All I do is swap on my studded tires and we ride all over the state year-round!
Nice! Might have to try that.