Ultimate Loose Tenon Jig [video 453]
ฝัง
- เผยแพร่เมื่อ 20 พ.ค. 2021
- In this video I make a loose #tenon #jig that duplicates the killer features of the Festool #Domino - narrow and wide slots in a single jig. And yes, I had to go there with that 'ultimate'. 🤷♂️ Enjoy!
Plans are available on my Etsy here - bit.ly/TenonJig
The initial production run of the flat-pack 10MW LTJ is already spoken for. Register your interest for subsequent production here - bit.ly/10MWLTJ_register
.
NB: this is not a pre-order, there is no commitment to purchase; you’re simply adding your name to a list to be notified when available.
+++++++++
Become a 10 Minute Workshop TH-cam Member for exclusive content - bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - / 10minuteworkshop
Support the channel directly - bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
10 years of Domino P1 • 10 Years of Domino Par...
DIY Peanut Jig • DIY Peanut Jig [**Gift...
Strong, or Strong enough? • Strong? Or Strong enou...
5 Festool gamechangers - • Four Festool Game-chan...
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - bit.ly/10minuteShop
Amazon store - bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - bit.ly/10minute-links
Full list of ‘Stuff I use’ at bit.ly/stuff_I_use
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
eBay UK - bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Strawbyte waste side jigs - bit.ly/Strawbyte_jigs
Trend T4 router - amzn.to/3ckBOF8
Spiral upcut bit - www.wealdentool.com/acatalog/...
18mm guide bush - amzn.to/3oiTchQ (US: amzn.to/341syAM)
Festool centering mandrel - amzn.to/32cYjcc
Festool OF 1010 router - amzn.to/2tBmXk9 (US: amzn.to/2tigRT6)
Festool TS55 Tracksaw - amzn.to/2pGvzDS (US: amzn.to/2oOgGhw)
Festool lever clamp - amzn.to/2pOohLD (US: amzn.to/2pnFZIM)
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
Mirock 500mm T-ruler - etsy.me/365P0KE
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
+++++++++ - แนวปฏิบัติและการใช้ชีวิต
![Flat-Pack CNC Loose Tenon Jig [video 482]](http://i.ytimg.com/vi/1dcI7amQisA/mqdefault.jpg)
![Flat-Pack CNC Loose Tenon Jig [video 482]](/img/tr.png)
![DIY MFT with Ikea Curtain Track [video 487]](http://i.ytimg.com/vi/223QALIbnRc/mqdefault.jpg)
![🔴 [TRỰC TIẾP] HCĐG LÀO CAI - U20 THÁI LAN | Cúp VTV9 - Bình Điền 2024| JET STUDIO](http://i.ytimg.com/vi/nXSwoEuqsFM/mqdefault.jpg)
![Next-Gen Loose Tenon Jig - LTJ30 [video 535]](/img/n.gif)
Absolutely interested in the flat pack version!!
I travel to job sites with all my tools on public transport. Having a flat pack version that fits in my rolling toolbox would be very cool and seriously increase my quality of work :)
You have to give to Peter, he never takes credit for an idea that isn't his even if he improves the idea itself. Peter always give credit to the person who had the idea first.
Thank you. 🙌 👍
Agree. Peter is just the best!
A gentleman...
That is one of the things that brings me back here. A wealth of original knowledge, but if something is a derivative, or an improvement on other work Peter is super transparent about it 👍👍
Peter, you have a great presence, should have your own network TV show.
Ha, thank you! 👍🙌
I’d be interested in the flat pack jig. Great idea!
The simplest ideas are often the best! I'd be interested in the flatpack version please!
Brilliant Peter, as a DIYer, I struggle to justify the cost of a Domino but this jig looks like just the thing I’m looking for. I have the router, all I need is a little bit of ply and a couple of spiral upcut bits👍
Absolutely interested in the flat-pack version. Yay!
I love the idea of that spacer jig for the Festool track saw. Allows one to set the track on the "wrong side" of the cut without losing a blade width's worth of material. Brilliant!
Great idea Pete, so simple yet very effective.
Yes definitely interested in the flat pack version!!
Simply brilliant. Brilliantly simple. Thank you - and Gordon.
Flat packed version sounds awesome. Great work both of you 👏
The flat pack is what was going through my mind when you started creating the jig! Yes, very interested.
I’d be definitely interested in the flat pack version!
Awesome idea! What a clever bloke Gordon is 👌🏼
Absolutely! 👍
Hi Peter, yes a flat pack sounds inviting, simple ideas are often the best!
Steve
I'd be interested in a CNC flat pack!
Yes Please, definitely interested in the flat packed version. Great video, thank you for your inspiration.
Great idea and execution! A flat pack jig is absolutely interesting.
Excellent Jig! Just saved me some money by not having to buy a Fancy $$$$$ machine, love the design and the possibilities! Your presentation is wonderful! I did subscribe and look forward to future ideas from you!👍👍👍👍👍!!!!!!!
Hi
The work is very excellent and I wish you safety and success
my regards
Abdullah from the State of Kuwait
yes for the CNC jig
YES to the flat pack version !!
Congratulations Gordon!
By far the best DIY Loose Tenon Jig I've seen so far! 10/10
Yes, def interested in a flat pack one!
Yes, absolutely interested in the flat pack version
Simply brilliant.
You never fail to amaze me Peter!
Great video Peter, much appreciated. I would be very interested in a flatpack version too. Thank you.
What a brilliant & simple idea, excellent work from both of you 👍
Absolutely fantastic video of one of the best jigs I have ever seen. Brilliant Peter and well done Gordon. Flat pack is a grand idea.
Great, definitely interested in the flat pack.
The simplest ideas are always the best. 100% interested in a fat pack jig. 👍👍
Brilliant Jig Peter and Gordon. Deffinitley interested in the flat pack version. Count me in.
I would definitely be interested in a CNC flat pack.
Excellent. Thank you.
Yes indeed, a flat pack version would be great!
Bloody brilliant idea and yet so damn simple! 👌🏽
Awesome colab, fellas. 👍🏽
Thank you Peter. Just watched your video a couple of times to get inspired.
Peter you have done it again, blown my mind with the efficacy of your delivery of both the idea and the video, fantastic idea and what a brilliant collaboration. Definitely interested in the CNC Flat Pack.
Thanks David! 👍
I have been looking for something like this. Definitely interested in the flat pack!
Very good. Thanks for sharing.
2:50 Thank you for that link. I’ve been trying to find the hole cover for my Makita plunge saw. Top gent 👏🏻
This is an amazing design. Thanks for sharing! I’d be interested in a flat pack version if available
yes please to the flatpack, genius!
Brilliant design - well thought out for multiple uses!
From Canada - VERY interested in the flat-pack kit!!
You had recommended the star byte off-cut spacers to me. Thanks for that.
Absolutely love them - used just about every day.
I used to try and juggle my larger pieces of plywood so the ‘keeper’ piece was always under the rail. As long as blade is sharp the ‘outside’ cut has a clean edge as well.
Love this, I'd be interested in the cnc flat pack too
I'd buy flat pack for sure. Great concept.
Well pointed out Peter using the little bandsaw jig to align the inside face of the plywood jig in the correct position on assembly.
I like this well thought out simple designed jig, its relatively easy to make and use with instantly good results as you've shown. Tony
Another yes to the flat pack, or cnc plans for it for those of us far away
Excellent job
This is really great!
As soon as the vid started and I saw the jig for the 1st time I could immediately see how it works....so simple. And amazed that this is the 1st time Ive seen it. Excellent stuff
I really do need to get some of those 'waste side jigs' - they look so handy to make those cuts quickly and accurately! Great looking jig btw.
Thanks! And yes, the waste side jigs are brilliant! 👍👍
Bought Strawbyte jigs on PM’s recommendation. Brilliant - use them all the time
Amazing, I'm going to have to make one of these to try it out. Also, I can't believe I never knew about those waste side jigs - just the thing I need!
Yep, Interested
Great video Peter ! I would definitely be interested in the flat pack jig set Great idea.
Definitely interested Peter, very clever idea 💡👍🏼
Thanks for showing Peter, I'd be interested in a flat packed version
Thank you Peter. Definitely would be interested in a cnc’d flat pack
Great vid. Would definitely be interested in a flat pack version.
Thanks so much for this Peter and Gordon. I’ve made a ropey version of this (first project on table saw so cuts aren’t great) but it is still good enough to allow me to join lengths of board together flush. For cabinet doors. Will probably make a neater looking version again.
Great idea!
This looks great. I have bought the plans but I would also be very interested in a flat pack kit. I'm very new to wood working but I can see other applications such as making table tops etc. Excellent idea.
Excellent definitely going to make one
again a typical Peter Millard design. Practical and handy and inexpensive . Thanks for sharing!
Superb! +1 for flat pack, depending on price.
I’d be interested in a cnc flat pack jig… brilliant idea👍
Cannot justify the price of a domino from Festool. This is great, I shall defo be building one....
Yes to CNC flat pack!
That is a great jig, I,ve been using several based on Jenn’s Mistake ‘s version, but no mid-panel slots with that one
Brilliant, I want one!! Thanks Peter.
Great idea, and looks to be more accurate than my Festool Domino Jointer! It can't even cut parallel to the reference edge.
Great idea! I'd be interested as well.
Simply brilliant
Thanks Leo! 👍
Absolutely great idea Peter. very interested in a flat pack version, please let me know if you go ahead. Once again great video and thanks for sharing 👍
Thanks Steve! 👍
Flat Pack, yes please
Great video ,thanks
I would be interested in the flat pack version for sure. Great little jig
Brilliant!
Absolutely brilliant! Certainly interested inthe CNC version pending price, of course. Good work lads.
Genius idea I'd be interested in a flat pack version
Really good job by you both. Very neat, cost effective solution. 👌
Cheers Stew! 👍
That is so good, when you have multiple carcasses it will earn its keep the first day. Parts can be interchangable or replaced so long as the original planks are the same size. Ace. O and to those that look around the ply can be found as off cuts.
Love the idea.Flat pack version please.
+1 for the flat pack jig, thanks!
It’s coming! 👍
This is an interesting idea. I'll definitely be interested in a flatpack version, might just tie me over until I get a domino
This is a very nice jig!
Flat pack would be great idea👍
YES to the CNC version!
Thanks Peter. I have a Makita 1/4" router, and got it all from eBay. Many Thanks. This rookie is going to have fun!
Definitely interested.
Never mind I figured it out. Great video
Greatest, simple, loose tenin jig on the market. I'd buy a flat pack kit in a heartbeat!
Thanks! It’s coming… 👍
Yet another EXCELLENT video. MANY THANKS!!!
Thanks! 👍
Thank you for another great video. I am also interested in a flat pack jig.
Genius! I think that a flat pack version of this would be good....go for it.
Thanks! 👍
I'd love a flat pack version!
Great video, I'd be interested in the cnc flatpack version. Thanks for sharing.
I must wave watched this video 10 times ... I can't wait to get my hands on one of these ! Sure I could just make one .. But this is a nice way to throw Peter a little support. Thanks for all the great content Peter
Great idea, would definitely be interested in a CNC flat packed version.
Excellent idea!! Thanks for sharing this jig idea
Thanks! 👍