Flat-Pack CNC Loose Tenon Jig [video 482]
ฝัง
- เผยแพร่เมื่อ 16 ธ.ค. 2021
- In this video it is my pleasure to - finally - introduce the 10 Minute Workshop Loose Tenon Jig, and rather than drone on about it, I put a simple carcass together using nothing but the loose tenon jig and the Trend T18s cordless trim router [gifted] with a 5mm carbide spiral upcut bit. Enjoy.
2023 update; this jig and the Plus were discontinued pending the launch of the latest veraion, the LTJ30, which is available at the 10MinuteWorkshop store at 10minute.shop, or follow the link on the ‘merchant shelf’ directly below the video.
+++++++++
Become a 10 Minute Workshop TH-cam Member for exclusive content - bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - / 10minuteworkshop
Support the channel directly - bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Loose Tenon Basics - • Loose Tenon Basics [vi...
Dowel Jig Basics - • Dowel Jig Basics [vide...
10 years of Domino - • 10 Years of Domino Par...
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - bit.ly/10minuteShop
Amazon store - bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - bit.ly/10minute-links
Full list of ‘Stuff I use’ at bit.ly/stuff_I_use
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
eBay UK - bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
10 Minute Workshop Loose Tenon Jig (register for availability) - bit.ly/10MWLTJ_register
Trend T18s cordless router - amzn.to/3IRi7CO (US: nope)
Festool Midi bluetooth extractor - amzn.to/3q29VXI (US: 🤷♂️)
Festool bluetooth remote - amzn.to/3s4yHcB (US: 🤷♂️)
1/4” shank x 5mm Carbide spiral upcut bit - www.rennietool.co.uk/collecti...
Festool Domino 5 x 30mm - amzn.to/2oTq5CZ (US: amzn.to/2oOqyrL)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Bessey DuoKlamp - amzn.to/3eDz1Ig (US: amzn.to/3w1s1dM)
Festool lever clamp - amzn.to/2pOohLD (US: amzn.to/2pnFZIM)
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Festool T18 drill/driver - amzn.to/2QAHpK1 (US: amzn.to/2RPuOCR)
Spax screws - amzn.to/2oYWydc (US: amzn.to/2oOjkDT)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
Maxitek Storm D4 adhesive - bit.ly/StormD4PVA
Other useful gear:-
Festool Domino - amzn.to/2pVSnMk (US: amzn.to/2o7E22Q)
Festool Domino assortment - amzn.to/2piZjHa (US: amzn.to/2pGv1Lx)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Mirock square - etsy.me/2MC0RT
Mirock 500mm T-ruler - etsy.me/365P0KE
+++++++++ - แนวปฏิบัติและการใช้ชีวิต
![Loose Tenon Jig Plus [video 493]](http://i.ytimg.com/vi/s79rc8yzbLQ/mqdefault.jpg)
![Loose Tenon Jig Plus [video 493]](/img/tr.png)
![A plywood square that's accurate, cheap and easy to make. [video 415]](http://i.ytimg.com/vi/aNjO4SBe5kw/mqdefault.jpg)
I wish more people were as objective about their products! Reviewed just like he reviews somebody else’s, fair and balanced.
Finally, the communication and teaching skills of Peter are just remarkable! He should be a professor at Oxford.
If only! 😂👍
Clearly a well thought out design and really nice hands off sales pitch. Great work Peter!
At 65 yrs old, I joined instagram this week, just so I could watch even more of your amazing content.
Keep up the fantastic work,
best regards
David
Thanks David! You have a few years in me - but only a few! 😂 There’s a great maker / woodworker community on Instagram, lots of great work being posted in stories and reels. 👍👍
Great piece of kit,I’ll have to be buying one of those as soon as they’re available 👍👍
Peter, you always distill even complex topics down to digestible bits. Great work as always.
Thanks Michael! 🙌
Brilliant 👏, the best part is the fair price you have put on your product and free knowledge, really excellent. Its always great helping other people get on and gain knowledge.
Great jig and very competitively priced. Well done Peter.
Great idea Peter.
I love the idea of flat packing it.
I am thinking about keeping one in my site tool box for emergency repairs.
I will get one next year.
Excellent demo & tutorial, Peter. It’s been great following the birth of this handy jig. This is going to open up a lot of possibilities for a lot of people…
Thanks Eddy! 🙌👍
Omg! Yes! So excited to be able to pick one of these up along with some square enoughs
Yes! 10min workshop shopping channel!:). Good job Peter!🙌
Congratulations for getting it into final production - great looking jig. Have a merry Christmas.
I'm in. I've been wanting to upgrade from pocket hole screws and dowels and this fits the bill perfectly for me as a weekend woodworker. Nice work Peter.
Thanks Peter! That was exactly where I wanted to place it.👍👍
I’ve decided to change my workshop along your setup. So the timing of this is great. Well done everyone. Merry Christmas 😃
Thanks, you too! 👍
Just had my jig delivered this morning and looking forward to trying it out.
Great work and great service, thanks Peter👍
Thanks George! 🙌 Enjoy! 👍
Amazing work Peter. Looks like a solid piece of kit. Keep it up!
Hi Peter. Thank you so much for making joinery so much more accessible! I discovered your channel during lockdown, and have learned a huge amount from your videos. Now with this jig, along with other things I’ve learned from your channel I can feel a whole world opening up to me that I no longer have to spend a fortune to participate in.
My plan is to start building more storage into our home to help us stay tidy & organised - especially as we’ve a new arrival coming in the new year 👶
All the best. Benjy
Sounds good! Thank you and welcome! 🙌👍
I hope you’ll make a nice amount on these Peter, very well thought out and smashing the existing barrier to entry! Can’t wait to get hold of one.
Thank you! 👍
Hi Peter, I just want to add my congratulations for a well put together solution, all the best, Simon
Thanks Simon!
I just got mine today. Excellent work. I cannot wait to put it to use. Thanks so much Peter! 🍻
Thanks for letting me know! Enjoy! 👍🙌
peter, used my flat pack jig today-----thank you thank you thank you -----perfect on the FIRST try-----a little awkward at first and then i went back and watched video #482 again to smooth out the process-----again thank you rick
Thanks Rick! Really appreciate the feedback - always great to hear! 🙌👍👍
Excellent design Peter, well thought out I enjoyed the walk through demonstration. Tony
Excellent Peter, I hope it’s a great success for you 👍👍
Great to see it come to fruition Peter top notch mucka.👊
Very nice. Looks very easy to use as all well thought out designs are. Well done, I will be buying just as soon as my workshop is useable.
Fantastic bit of kit there and fantastic prices. Hopefully I’ll be getting one from the second batch as I’ve registered interest a while back. Can’t wait. Looks so simple and easy to use. Even for me.👍👍👌👌 awesome job Peter.
Thank you!
Received mine today. Done a test join and I am really pleased. Tried a few dowel jigs before now, one of them not particularly cheap. The loose tenon jig gave a perfect flush finish first time, which the dowel jigs never quite managed every time. The only drawback for me is it makes you want a Festool Domino even more.
Great piece of kit Peter. I’ll be buying one along with all those other subscribers to your channel on the second run.
Would have been amazing to get one for Christmas! Hope them who got the first set are happy. Will be waiting for the second or hopefully third batch :D
Great idea and good for you for moving forward with the concept.
Congratulations on getting this to market at a reasonable cost.
Hi Peter, I wish you good fortune with this and any other new ventures. Oh, and seasons greetings.
Thanks, you too! 🙌
Just spent a lazy afternoon looking at loose tenon jigs here on you tube, had a nice time of it too with a break for coffee and a biscuit. The Peter Millard version wins hands down. It looks to be very easy to use and very well finished off. Thanks for showing us.
My (batch 2) jig and starter kit arrived today thank you Peter. Very well packaged, its beautifully engineered and has that lovely ‘new wood’ smell to it. Looking forward to trying it out soon. Oh, and not shown in your ‘advert’ above, came with two 10-minute workshop stickers as well. Thank you!
Thanks Geoffrey! 👍👍
Chuffing love it. Nice one Peter. I'll be buying one
That's a really well thought out jig Peter. I'll be having a word with Father Christmas!
I can't wait to get my hands on one of these jigs 🤞
Looking forward to placing the order in the 2nd batch!
Thankyou Peter. I will be adding my name to the list. Best wishes for Christmas and 2022
Thanks John. Same to you too!
Congrats Peter
Well done as usual Peter and what a price, fantastic. I've just registered and will be getting the full kit. Thanks
🙌👍Thanks!
Congrats on finally getting it out Peter mate. I've no doubt it'll be a success.
Cheers Stew! Fingers crossed! 👍
Well done, Peter great jig can see me recommending this to my brother. I already have a domino jointer but must admit still tempted..
It works a treat. Thank you.
Absolutely brilliant, really liked the one you made in the summer. Very keen to get one of these next year. Great work Peter, merry Christmas to you
Thanks Alan, same to you too. 🙌👍
Merry Christmas and a happy new year to you all from Steve, Beeston, Leeds
Thanks Steve, same to you too! 🙌👍
Great product. Fantastic value
Hi Peter,
Just getting geared up for my first project with the loose tenon jig. Had a test run today, after resolving a bunch of problems that were nothing to do with the jig. I have to agree with you. It is very easy to use and the accuracy is very impressive. Well done and thank you.
Thanks Ron! 👍
A great option for loose tenons Peter bypassing the big payout on festol. Will be putting it on my wish list
That is seriously good value.
Great jig Peter. Can’t wait until the next batch is ready. Got some built in wardrobes I have been putting off for years than I really must get done next year. Perfect excuse to buy this kit 👌
Cheers Kevin! 👍
Awesome stuff Peter
Love your work
Thank you! 🙌
Great work, Peter, and thanks for putting the time and effort into making this to help other woodworkers! I’ll look forward to picking one up next year! Happy Christmas!
Thanks Paul! 👍
Love your MFT table sorted me for cabinet making idea in a my small shed which was to small for a table saw now I can make a fold down table cheers Pete love the Jig..
Thank you! 🙌👍
Nice work Peter
Looks great good luck with it...🤘🤘
Brilliant stuff Peter, well done mate, stay safe and well , and have a great Christmas,
Thanks Paul! 👍
Excellent and well demonstrated.😀👍
Brilliant I hope it is a great success 👍🏻
Nicely designed jig. At that price it's...Merry Christmas to all! Have yourself a Merry Christmas Peter.
Thanks Gary! You too! 🙌👍
So refreshing to hear properly pronounced English on a woodworking channel :-) Good ideas, very nicely presented, thanks for sharing. Merry Christmas and all the best for the New Year !
Thank you! Same to you too! 👍
Brilliant. Great job 👍
Can't wait to get one
Great jig - will have to add my name to the next production run :)
The jig looks great Peter, been worth the wait (and all your hard work!) I think it represents excellent value and I'll definitely be ordering one in the new year! Have a great Christmas (and a rest now it's done Lol)
Thank you, same to you too! 🙌
Blimey, that intro had me feeling like I was back in the school playground watching the cool kids leave on the bus for the ski weekend. :-). :-). All looks good Peter and I am sure it will be a great success for you - and well deserved.
Haha, thanks Norman! 🙌👍😂
The jig is looking good Peter, I'm glad you have spent then time to make a refined product at what seems to be a steal of a price. After recently buying the peanut mini jig for my loose tennons on your recommendation I wasn't sure if I would be able to buy your jig too but at the low price you are selling it for I'm sure I can have them both and they will complement each other well. Thanks again for the work you have put into the product and for all the informative videos.
Thanks Matt! 👍
Nice work.....I particularly like the high-quality sweetie bag for storing the kit components😂
It's a party bag for (kind of) adults.🍬 👍
Merry Christmas!
Thank you, you too! 👍
Great job. That looks like a perfect jig for a perfect price. Thanks for sharing the video. I hope you'll be selling thousands of them.
Thanks Hans! 👍
Gr8 video, excellent value for money. Well worth it
Brilliant video Peter. 👍
Thanks David! 🙌
Nice little jig.
Excellent job
Great video! Was wondering when it was coming
Boom! 👌🏻 will keep an eye for stock availability 😁
Brilliant! Just brilliant! 👍😁
Very good design. Really pleased you have an opportunity to commercialise a very useful product for those of us who aren’t yet able to justify an $1800 domino machine ( here in Australia)
Thank you!
Absolutely superb Peter. That is going to fly out. Game changer. Fantastic price. Think I may have to get on the next batch. Add to my 10MW collection... 😁😁👍👍
Thanks Barry! 🙌
That is brilliant so congratulations.
Thank you! 👍
These look good. Once you get the manufacturing down, you might consider a partner on the other side of the pond. Lee Valley or Tools for Working Wood seem like good possibilities.
Great work Peter! It appears to be the perfect affordable alternative to the domino and direct competitor to dowels and biscuits. It will be interesting to see how it’s received/reviewed by other TH-cam woodworking gurus.
Thanks Chris! Yes, keen to get the production model into a few hands on TH-cam in the new year. 👍👍
great stuff
Great kit Peter. Now you need to get a patent on this jig a.s.a.p. no doubt this jig can be made from aluminium and mass produced shame you haven't got a backer . Just shows how money can be saved. Order will be in for one next year . Going to rebuild my kitchen and this will be a dream come true for me .
I think aluminium would be overkill tbh, and the design is registered, patents applied for where I can.
@@10MinuteWorkshop glad that's the case on te design ect.. we all know how these can get copied and your hard work shouldn't goto waste.
Peter, great! I already send a request to keep informed when I can please a order for it.
Hi David. I don't have the products yet - as soon as I do I'll be sending out notifications. 👍
Great jig Peter, hope it becomes big success. Seems like a nice trade-off for being just a bit slower than the domino, but way cheaper. Only downside I can see is if you router that doesn't have decent dust extraction (my Bosch green router would make a bit of a mess).
Thanks Michael. Yes, and to be fair the 18mm guide bush doesn’t help with the dust collection. 🤷♂️👍
Hi Peter. Another fantastic video. Thank you very much . My prediction is the v. 2 is coming in machined aluminum.
V2.1 😂👍
You are amazing. Man... Thx i got it idea... 👍💡
Wow!! Peter ....Great price for a great jig, I've got a domino already ,but I think at that money & value, I will grab one when they are more available, well done mate fantastic👍👏👏 ...James
Thanks James! 🙌👍
Brilliant !! My name's down.
🙌👍
Looking very good Peter 👍 - I registered for the first batch, but as others have mentioned there was no confirmation, so hope it went thru, my wallet is ready 😉.
👍👍
Registered. These will be ideal for when I make the planned built in cabinets for the living room. Amazing product at a fantastic price point.
Sign me up for second run production!! Looks amazing.
Great jig and video as usual Peter, Unfortunately didn't get one of 1st batch so had to get DF 500 (just come it's great)and blamed you LOL. From Katsu router to Df in 3 years.
All the best, Keep up with the high speed dominos in the new year
Thanks! Domino is a joy to use and hands down the most versatile of connectors and jointing machines. Katsu to Domino in 3 years is good going! 🙌👍👍
@@10MinuteWorkshop I need to start saving up again now for some wood
Peter put me on the list, I have a domino but any excuse for another designated router to make life easier. I love the channel and you deserve the credit for the hard work you have done
Thanks Derek! 👍👍
Hey Peter, I've been subscribed to your channel for a while now and that's definitely a neat jig for doing loose tenons with a router. I build cabinets and furniture for a living here in the States, and I have a 5x10 CNC and 3x5 Laser, so if you need some help with production stateside I might could help out. I'm not a big manufacturing plant, just a guy in a shop like you, I just happen to have more space lol. Keep up the great videos!
Hi Matthew, and thank you! I’ll certainly bear this in mind - there’s a bit of work to do before we get there though, but a localised version of the jig in imperial measurements is definitely on the roadmap! 👍
Thanks, you just made my domino useless... 🤣🤣🤣
Joke aside, really good jig. And for the middle of the board it also works amazingly well. I could have saved a lot of money if this jig was available at the time I bought my domino.
Please more PM Jigs in the world.👏👏👏
Oh, there are more jigs coming... 👍 And thank you! 🙌
The huge smile on your face at the opening of the video was quite heart warming. I'm really glad you've gotten you product to market. And what a great product it is! I signed up to wait. Haha! And I'll do just that.
Question: The locating pins you used with the jig are user supplied? I didn't notice them in the bundle offering.
Congratulations on your accomplishment!
Thanks Mark! The locating pins come with the jig - they’re an essential part, so are included as standard; sorry if that wasn’t clear! 👍👍
@@10MinuteWorkshop I figured. Just thought it was worth mentioning. Waiting patiently for second run...
Thankyou for not pricing your jig over the top. You always come across as a genuine bloke and I am looking forward to getting one. One thing I noticed in your video was the black cone bit on your new trend router. Is it a centring tool. I have two old trend routers well I say 2 I’ve just about got 1 using the parts but they keep on working. You have got me interested I might have to look at the Trend catalogue. Merry Xmas John from County Durham.
Thanks John! The cone is a centering mandrel - this is a Festool one, available from Amazon here - amzn.to/32cYjcc
Thanks Peter, I've received my kit thanks and it feels quality, just one question though what size hole do you recommend for the thread inserts, just asking as I don't want to split the jig.
Thanks Kenny! I use a 7mm bit - it gives a nice bite to the threaded insert. 👌 I do go through all the details in the assembly guide video btw, so worth a watch. 👍