ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2020
- When you are using CR-10 V2 or V3, if you need to replace the nozzle kit, I hope this video will help you.
Creality Official Store: store.creality.com
Creality Official Site: www.creality.com
Facebook: / officialcreality3d
Twitter: / creality3dprint
Instagram: / creality3d
Reddit: / creality3d
#Creality, #CR10V2, #CR10V3 - วิทยาศาสตร์และเทคโนโลยี
Do i see right that the cr 10 v3 can be easy turned from direct drive to bowden ?
I would advise everyone from this particular set up... I had a clog and had to take this monstrosity apart. I would recommend upgrading the hot end and mount immediately. I did however have perfect printing for close to 6 months.
Hello, Thank you for this video, where can I find this spare part? Thks
拆掉蛇皮網有什麽意義？
This is insane
So it is not an all metal hotend???
It looks like it is they just kept the nozzle cover on idk
It never was, they did false advertising
Literally the most inconvenient way to change a hotend. The blue part should just be able to unscrew, I need to remove it because my nozzle blew out and there's filament jammed up in it.
If in need of technical support, please email to cs@creality.com, which is our tech support as well as after-sale service.Due to tons of emails go into this folder, it maybe response you not instantly,
I'd appricite you if you can wait for it .
or join in the Facebook Group (facebook.com/groups/3110994512278883/) to discuss with thousands of experienced 3D printer users.
@@Creality3D Don't make excuses for bad engineering just tell people to print a third party replacement that was actually thought out properly. Or heavily discount the printer because it is terribly designed to the point where the users have to replace parts immediately upon getting it
since 7 month no problems, worked fine. Today i found parts of a broken bearing in the extruder plate. Where is the rest of the bearing? Where was the bearing installed? Where can I get the spareparts now?
if you have technical problem, email to cs@creality.com
Can i print carbon fiber with thus extruder?
Где можно взять экструдер, который помещается на каретке принтера? Моя карета точно такая же, но экструдер боуден.
go and check here : www.creality3dofficial.com/
Why is my printer's teflon tube always stuck and doesn't come out nor go in anywhere ? Any suggestions?
you need to heat the hotend when you try to remove it
Mine has been great....then terrible. Come to find out its NOT an all-metal hotend or extruder. They simply swapped out a problematic plastic idler arm for a metal one and called that an "all metal extruder kit". People like me come along and think theyre getting an all metal hot end or at LEAST an all metal extruder and therye getting neither. Mine wont print reliably above 240C (which is everything I need to print) so its basically junk to me. The hot end isnt an E3D. Its a clone with a shorter heat sink so there are no easy "drop-in" options I'm aware of. Its starting to look like major surgery replacing the entire print head because I suspect the extruder is not a genuine E3D either. Taking it apart it looks like a meth addicted monkey put in the threaded brass inserts that hold the print head together. Also, the part cooling ducts are melting after 6 weeks of use printing nothing hotter than PETG. If you cant tell, Im super UNIMPRESSED with my CR-10v3. I have an email into customer service so we will see what they say. I can tell you if I have to buy a whole new printer it will NOT be anything from Creality.
Honestly I love my V3 but that's because I knew all of these things beforehand. Creality really shouldn't expect everyone want to know that though. They need to market it correctly this is definitely false advertising.
That said you can upgrade your heat break for 30 bucks or less and print up to 400° c
barrel clean??? XD
Only had this printer for about 3 weeks and it's taken years off of my life. Printed decent for the 3 weeks and then the whole thing clogged. That red wire melted to the hot end and this video is wrong. You can hardly tilt the clear cover to remove the bottom left screw because the fan has a stupid lip right in front of it. We'll see when I get running again but so far it's been 2 days of headache stripping this thing down to each part.
i had some trouble but its been working really well. the nozzle change wasnt bad and i was able to clear a clog in about 10 minutes.. make sure to have good gcode start and stop and use high quality filament. not the cheap shit
@@RichardRecupero nope,same issue and its not filament,they should have cloned e3d better
@@darkd5ds these printers are shit, only reason to buy them is that Prusa doesn't make large build plate model. Electronics box is badly designed, the filament sensor that has such a high friction it stops filament from moving through.... only thing going for creality is the large community but V3 is not very common yet so even that's outta window. Sadly, I see no reasonably priced alternative as of yet.
@@martincerny3294 i bought my 2nd hand for $100😅 plus extra goodies and im already looking into changing out the hotend to hermera,luckily it game with a skr 1.4 turbo
@@darkd5ds That's the problem. The gears are too tight but it's been working somewhat better. I'll probably get rid of the Titan direct drive. That's what's been constantly screwing up.
I can't load the ender3v2 laster firmware
Worst Printer ever. Not a single good print in 4 months trying.
Hi Gregg, i'm sorry for that, is that possible to send an email to our professinal tech team to get help? it's better attach some pics or video of showing wha'ts the problem, we are happy to help you.
Mine running perfect , top notch quality & now no troubles , I’m new to 3D printing took a few months to learn but have tuned it all up nicely , you need to calibrate & do test runs with different slicer & temp settings etc, I need high quality so I run machine at about 40mm/s
Add a BL touch but make sure you become good at levelling bed prior though
to replace just the nozzle only check this video.The plastic part comes right off with tweezers th-cam.com/video/798w4uqQO3w/w-d-xo.html
If I have to disassemble the entire hot end just to replace a nozzle, it s a no sale for me. Poor design
i have it, still no drama so far...... but im not sure why on earth they just had to remove all those wires???? hahhahaha like what the????!!!?!?
No, this is of course just to change the hot end, not to just change the nozzle. You don’t have to unscrew half the machine to change the nozzle.
@@henriklagercrantz that extruder is shit regardless... That one screw behind the fan is just a little final touch of absurdity.
@@deadpoollane4229 thanks so much for your hint. I was just about to start following the video step by step. You saved me from this mess.
i got angry!
What a shit design.