$15 DIY How to Store a Thule Car Roof Carrier. Storing Hanging Roof Cargo Box System Where to store?

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ส.ค. 2024
  • How I stored my Thule Roof Carrier. This video is intended for entertainment purposes only. if you decide to hang your roof carrier make sure hooks are secure and can hold the weight of the carrier. I will NOT be held liable for any damages. So be careful, Carrier is heavy and might require 2 people for lifting.
    If you liked this video Please Help support my channel.... please subscribe #OneSimpleDad it will keep you up to date on my future videos. also if you like cooking videos, I was a professionally trained executive chef. I have retired from cooking but I'm sharing all my cooking recipes and tricks I have learned over the years. check them out #OneSimpleChef
    Thank you
    products used in this video
    Thule roof Carrier
    amzn.to/3JlBK8z
    wall hook
    amzn.to/41VwhN1
    3/4 inch conduit 5 ft long (Prices has gone up since I made this video)
    amzn.to/3mohsSE
    these compression fittings i used but are not needed... i used 2 on each end also i grinded down the middle of 2 of them and pushed them further on. i use them as markers as to where the hook should be on the bar
    amzn.to/446ojRo
    Music: Everything I Want [Original Mix] by Imperss is licensed under a Creative Commons License. creativecommon....
    Support by RFM - NCM: bit.ly/2xGHypM

ความคิดเห็น • 113

  • @jwebond
    @jwebond 2 ปีที่แล้ว +20

    Just bought one of these Thule roof boxes - and have implemented your solution in my garage in order to neatly store it - many thanks for the inspiration !

    • @onesimpledad
      @onesimpledad  2 ปีที่แล้ว

      Glad you enjoyed the video.

  • @theoroe9365
    @theoroe9365 4 หลายเดือนก่อน +3

    Genius! The solution becomes obvious when you see you can clamp it to a rod just like you do a roof rack. Thanks for thinking it through for me.

    • @onesimpledad
      @onesimpledad  4 หลายเดือนก่อน

      You're welcome. I love having this thule carrier stored on the wall and out of the way. I've seen other people use ropes and pulleys and hang them on the ceiling, but I thought this was just a lot easier to do. Well, thanks for watching

  • @user-lv6bo4mt9b
    @user-lv6bo4mt9b ปีที่แล้ว +6

    Bought two bike hooks and a 5 foot 1/2 inch metal conduit pipe for a grand total of $9. Thanx for the tip.

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      You're welcome.... thanks for watching

  • @jugodenaranja2010
    @jugodenaranja2010 24 วันที่ผ่านมา

    I did it! Different hooks and different wood pole but same idea. Thanks for your video !

    • @onesimpledad
      @onesimpledad  7 วันที่ผ่านมา

      That's great! Thanks for watching

  • @JunBautista
    @JunBautista หลายเดือนก่อน

    I’ve had mine hanging the same way from a Rubbermaid rail system. Your way is easier, since the box can be clamped down while on the floor. I might redo my setup now. Thanks!

  • @jeffgoldman2119
    @jeffgoldman2119 ปีที่แล้ว +1

    Thanks so much, it worked perfectly. Now I just have to get used to what looks like a black casket hanging from my garage wall.

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Since I got the grey one it doesn't look too bad hanging on the wall.... there are other options some people use 2 bars, rope and a pulley and hang them from the ceiling but I still prefer this method

  • @mattwolfrom6
    @mattwolfrom6 ปีที่แล้ว +1

    I was going to try hanging it from the ceiling until I saw this video. Thanks for the idea!

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Glad to help. I had mine on the wall for over 1 year now... I love it... I can easily lift it and take it down or put up by my self.

  • @KeithPickeringGuy
    @KeithPickeringGuy ปีที่แล้ว +2

    This was basically the same idea I had for storing it, glad to see it actually works.

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Yes it works great even when putting away by your self

  • @paulzad
    @paulzad 23 วันที่ผ่านมา

    This solution rocks. It ended up costing a whopping 17 bucks for the hooks, pipe and caps. Hope she holds for a long time!

    • @onesimpledad
      @onesimpledad  7 วันที่ผ่านมา

      That's great to hear. Mines holding up great. It's been on the wall for over 2 years without any issues. Well thanks for watching

  • @DavidRoche0713
    @DavidRoche0713 ปีที่แล้ว +2

    WOW! I am absolutely going to try this. Best storage solution yet.

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Thank you... I've been very pleased with it.

  • @fookman
    @fookman หลายเดือนก่อน

    great video, trying to figure out a solution and yours is simple and elegant!

    • @onesimpledad
      @onesimpledad  หลายเดือนก่อน +1

      Thank you. I'm very happy with it... I've had it on the wall for over 2 years and have no issues with it. It has saved me so much space... well thanks for watching

  • @DAMCOOLDAV
    @DAMCOOLDAV 3 หลายเดือนก่อน

    Thanks for this, maybe now I can get a ton of room back!

    • @onesimpledad
      @onesimpledad  2 หลายเดือนก่อน

      I'm glad I could help! I've been very happy storing my roof carrier this way. Figured if I left it on the ground, my kids would be climbing all over it. Well, thanks for watching

  • @ChrisRasmussen13
    @ChrisRasmussen13 ปีที่แล้ว +1

    Your video solved my problem amazingly fast. Thank you!

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      You're welcome... glad I could help and thank you for watching

  • @kekoadavidson581
    @kekoadavidson581 2 วันที่ผ่านมา

    Have you seen any bowing in that conduit tube? I doubt it but thought I’d ask.

  • @HollyLeeCoaching
    @HollyLeeCoaching 2 ปีที่แล้ว +2

    Genius DYI, thank you for the detailed tutorial!

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Your welcome. I will keep post more helpful videos. Thanks for watching

  • @Tintin-vd5kz
    @Tintin-vd5kz วันที่ผ่านมา

    Instead of buying the conduit, could your keep your roof box attached to your roof racks and hook them to the wall brackets?

  • @peetfj
    @peetfj 2 ปีที่แล้ว +3

    That's awesome. Excellent idea thank you very much! I will be doing the same.

    • @onesimpledad
      @onesimpledad  2 ปีที่แล้ว

      Your welcome and Thank you for watching. Also just make sure the hooks are secured into wall studs.

  • @BroncosFanatic09
    @BroncosFanatic09 ปีที่แล้ว +1

    Nice call, well executed sir! Thanks for the idea.

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      I appreciate the feedback... thanks for watching

  • @taurusview9
    @taurusview9 ปีที่แล้ว +1

    Very smart, thank you for sharing!

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      You're welcome thanks for watching

  • @alexperales09
    @alexperales09 ปีที่แล้ว

    Thanks, great idea! I used a piece of scrap 2x4 since I had some already!

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Thats great, use what you have. I've been very pleased with this way of storing the Thule carrier.

  • @MB-rt5bx
    @MB-rt5bx ปีที่แล้ว

    Brilliant storage solution, thanks for sharing

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Thanks I appreciate it thank you for watching

  • @SteelRaider12
    @SteelRaider12 2 ปีที่แล้ว +2

    I'm using 3/4" PVC, wonder if that's just a bit lighter than the conduit. I have the Large size. Love this idea. Thanks.

    • @onesimpledad
      @onesimpledad  2 ปีที่แล้ว +3

      Thanks... I like the large hooks since I can hang the Thule without any help.
      I used the conduit for durability, it seems pretty strong and the conduit isn't that heavy.... hey if the PVC works thats great.... but i would just hate for the PVC to snap or bend over time then damage the Thule.

  • @tldrttyl
    @tldrttyl 2 ปีที่แล้ว +2

    This is so awesome! Thank you for the great idea!

    • @onesimpledad
      @onesimpledad  2 ปีที่แล้ว +1

      Glad you like it... Thank you for watching

  • @thomaspedersen6361
    @thomaspedersen6361 2 หลายเดือนก่อน

    Loved this idea. I have three of these and wanted a simpler way of storing them out behind the shed, so this is perfect as I can hang four of the hooks and then hang the three boxes in between a longer rod. Not sure what type of rod or pipe it was you were using ?

  • @james.a
    @james.a ปีที่แล้ว +1

    Genius idea. Thanks for sharing!

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Thanks. Makes it extremely easy to store now.

  • @vergs20
    @vergs20 2 ปีที่แล้ว +4

    nice video. im wondering if thule clamp might damage (stress) after many months of carrying the body. im
    thingking of buying U-shape clamp that i will use in hanging instead of the original clamp. the video is very helpful. thank you

    • @onesimpledad
      @onesimpledad  2 ปีที่แล้ว +7

      Its a valid concern. The Thule box is heavy but not ridiculously heavy. I've had mine installed for over a year without issue. You could add extra straps to try and relieve some of the strain on the clamps, I don't feel it is needed.
      you also have to think about the force (Stress) that is put on these Thule boxes when they are strapped to your vehicle and driving 65 to 80 MPH. That alone could weaken the original clamps or cause stress cracks.
      Personally I'm more worried about my kids jumping on it while its on the ground. if it ever does become an issue I will Definity let my viewers know.

    • @vergs20
      @vergs20 2 ปีที่แล้ว +2

      @@onesimpledad i did bought a c clamp to carry the box in garage and use the original clamp when installing to the car. your video saves a lot of garage space and also looks more organized

    • @greatdaaale86
      @greatdaaale86 ปีที่แล้ว

      @@vergs20 which C-clamp did you end up using? Curious which one fit easily. Thinking I would like to do the same thing so as not to stress the clamps that come with the Thule. Thanks!

  • @JeremyBrowning-lu5hj
    @JeremyBrowning-lu5hj 7 หลายเดือนก่อน

    What a crazy easy and great idea ;-) .. Thank you

    • @onesimpledad
      @onesimpledad  7 หลายเดือนก่อน

      You are welcome! And thanks for watching

  • @njkytacttempoutpost8
    @njkytacttempoutpost8 หลายเดือนก่อน

    Smart!

    • @onesimpledad
      @onesimpledad  หลายเดือนก่อน

      Thank you. I'm very pleased with this. It has saved me so much space. Well thanks for watching

  • @raysaavedra
    @raysaavedra ปีที่แล้ว +1

    Done. Thanks.

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Glad you like it. Thanks for watching

  • @billkuhl5321
    @billkuhl5321 ปีที่แล้ว

    I think that’s a very clever idea. My only concern is that’s placing a lot of stress and trust into a 3/4 compression coupling. A single section of intermediate or rigid pipe would be much stronger.

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      It is a single pipe... I grinded out the center of the 3/4 compression coupling and pushed it further on to the pipe just as a marker as where the hook should go. Its not needed thats why I don't really talk about it in the video.

  • @michaeltmargolis4031
    @michaeltmargolis4031 4 หลายเดือนก่อน

    F-ing brilliant! Just the idea I needed. Thank you!

    • @onesimpledad
      @onesimpledad  3 หลายเดือนก่อน

      You're welcome, and thanks for watching

  • @elvarsnorra
    @elvarsnorra หลายเดือนก่อน

    Great solution! Does your bar bend? I bought a 3/4 electrical conduit and there is a noticeable bend.

    • @onesimpledad
      @onesimpledad  หลายเดือนก่อน

      Maybe a slight bend, but nothing that I was ever worried about, and it's been on my wall over 2 years. If it's a concern, you could always slide in some rebar for added support. Well thanks for watching

  • @darrenharris6319
    @darrenharris6319 2 หลายเดือนก่อน

    Brilliant

    • @onesimpledad
      @onesimpledad  2 หลายเดือนก่อน

      Thank you. I'm glad you like it... and thanks for watching

  • @pyrorookie6642
    @pyrorookie6642 ปีที่แล้ว +1

    Great job and idea!! 😊👍

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Thank you for the positive feedback and thanks for watching

  • @michaelkeller3107
    @michaelkeller3107 5 หลายเดือนก่อน

    Worked perfectly, just wondering if the weight of the box resting on the bar might stress the plastic clamp?

    • @onesimpledad
      @onesimpledad  5 หลายเดือนก่อน

      It is possible, but I've had mine thule carrier hanging on the wall for 2 years now. I remove it for about 2 weeks a year and then put it back up on the wall. So far, I have noticed NO damage to the carrier or clamps.

  • @shakex2191
    @shakex2191 ปีที่แล้ว +1

    I Freaking LUV this idea. Thanks.

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Thanks for the feedback... its a great way to store it... I've seen a lot of people hang them from the ceiling but found this works better.

  • @alfredzarate917
    @alfredzarate917 3 หลายเดือนก่อน

    Thanks

    • @onesimpledad
      @onesimpledad  3 หลายเดือนก่อน

      No problem, thanks for watching

  • @coder6083
    @coder6083 7 หลายเดือนก่อน

    Genius! Gosh I feel like idiot. thanks!

    • @onesimpledad
      @onesimpledad  5 หลายเดือนก่อน +1

      Thanks. I love storing my thule carrier on the wall. it takes up less space... well, thanks for watching

  • @katharinenunn7529
    @katharinenunn7529 7 หลายเดือนก่อน

    I love you. This is amazing.

    • @onesimpledad
      @onesimpledad  7 หลายเดือนก่อน

      Thank you... It's been really useful and easy to put up and take down... well, thanks for watching

  • @nervouss
    @nervouss ปีที่แล้ว +2

    Is there any issue with the weight being on the boxes clamps? I know when it sits on the car the weight is distributed differently.

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว +2

      Maybe but I've had mine hanging on the wall for a year in half without any signs of issues. I'm not taking mine down anytime soon either. I'll let you know in 10 years if anything happens

  • @Cuwill38
    @Cuwill38 4 หลายเดือนก่อน

    Great

    • @onesimpledad
      @onesimpledad  4 หลายเดือนก่อน

      Thank you, and thanks for watching

  • @lowkey.engineer
    @lowkey.engineer 6 หลายเดือนก่อน

    Bravo

    • @onesimpledad
      @onesimpledad  5 หลายเดือนก่อน

      Thank you, and thanks for watching

  • @soulfultaste
    @soulfultaste ปีที่แล้ว +1

    thats amazing.. but what is that bar you got ? i am trying to find a solution but am based in UK

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      The bar is a 5 foot metal Conduit tube ussually used for electrical wires outside. Check your local hardware store in the electrical section.

    • @soulfultaste
      @soulfultaste ปีที่แล้ว

      @@onesimpledad thanks

  • @rojomo400
    @rojomo400 10 หลายเดือนก่อน

    Clever!

    • @onesimpledad
      @onesimpledad  10 หลายเดือนก่อน

      Thank you... and thanks for watching

  • @kamilhabowski4067
    @kamilhabowski4067 ปีที่แล้ว

    Good idea & good job. I'take it ;-)

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Thanks for the feedback and thanks for watching

  • @christopherciciora6533
    @christopherciciora6533 หลายเดือนก่อน

    Do you think this can be done horizontally?

    • @onesimpledad
      @onesimpledad  หลายเดือนก่อน

      Anything is possible if you have enough people to hold it and a strong enough pole to attach it to the wall.... I've seen some people use two poles and a rope with a pulley system and attach it to the ceiling as well... well, thanks for watching

    • @christopherciciora6533
      @christopherciciora6533 หลายเดือนก่อน

      @@onesimpledadmade it work just as you had it! Worked great! Thanks for saving people money

  • @damiasas8854
    @damiasas8854 ปีที่แล้ว

    whether the box will not be damaged by hanging vertically after years

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว +1

      Good question only time will tell. The empty carrier is heavy but doesn't weigh too much. You could always use 4 hooks and 2 bars instead of 2 hooks, might be a little harder to line everything up. I've had mine hanging on the wall for almost one and half years. No damage. But Hanging it on the wall protects it from my kids jumping or climbing on it. Also I see a lot of people driving 80+ mph with these carriers on their Suv's so I'm assuming they are pretty durable. Thanks for the comment and thanks for watching

  • @diejemoucom
    @diejemoucom 6 หลายเดือนก่อน

    how is it after 2 years of use? still no damage? Thanks.

    • @onesimpledad
      @onesimpledad  6 หลายเดือนก่อน

      Still in great shape... no damage at all... it hangs on the wall for about 350 days every year.
      thanks for watching...

  • @MrMslovell
    @MrMslovell 9 หลายเดือนก่อน

    I always take my roof bars off, any reason I couldn’t use the roof bar to hang instead of conduit or similar?

    • @onesimpledad
      @onesimpledad  9 หลายเดือนก่อน

      You might be able too but not sure the strength of the bars or if the bars are even long enough.... I believe I had my hooks in the wall 48 inches apart this way, they would each go into a stud

    • @MrMslovell
      @MrMslovell 9 หลายเดือนก่อน

      @@onesimpledad thanks for such a quick reply. Good point re the length. Thanks.

  • @TomWilson8003
    @TomWilson8003 ปีที่แล้ว

    Question? What are end caps called and what is their purpose?

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว +1

      Conduit compression fittings
      amzn.to/415x9hd
      They're not needed. I grinded down the inside of 2 of them and slide them about 1 foot down on each side and then added one to each end. I use them to help me determine where the bar is going to sit on the hooks.

  • @soulfultaste
    @soulfultaste ปีที่แล้ว

    the hooks- what word shall i search on the internet for these strong hooks?

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      wall hook
      amzn.to/41VwhN1
      There normally used for holding a bike to the wall or ceiling. So maybe search bike hook

  • @nicolehoeneman2591
    @nicolehoeneman2591 2 ปีที่แล้ว +1

    What are the fittings on the end of the conduit?

    • @onesimpledad
      @onesimpledad  2 ปีที่แล้ว +1

      I was waiting for someone to ask about those... they are just compression connectors (couplings) . I sanded the inside of two of them so I could slide them further down the conduit... normally they just go on the ends of the conduit but I wanted to use 4 of them to mark where the bar should rest on each hook. Thanks for watching

    • @vinaypothnis
      @vinaypothnis ปีที่แล้ว

      Thanks so much for sharing this! This is just awesome! Saved me so much grief!

  • @esaliya
    @esaliya 2 ปีที่แล้ว +1

    What size is this Large or XL?

    • @onesimpledad
      @onesimpledad  2 ปีที่แล้ว +3

      Its a Thule Motion XT XL

    • @esaliya
      @esaliya 2 ปีที่แล้ว

      @@onesimpledad Awesome, I've the same model and would try a solution like this

  • @kyle88ss
    @kyle88ss ปีที่แล้ว +1

    Have you seen any degradation/damage to the carrier with it constantly hanging?

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว +2

      Nope... I've had mine hanging up for over a year. No issues

  • @foxyredsheri
    @foxyredsheri ปีที่แล้ว +1

    I was very nervous putting my brand new beach cruiser on this rack. th-cam.com/users/postUgkxG6JIgwJhur8_Rg8UeQ3EmePzi_wSncL8 But after reading many reviews I decided to get this one and take a chance. When arrived it was very simple to adjust and put together. I also added spike tape over the metal hooks before securing and tightening the straps, and no scratches. I also purchased the top bar made by the same company so that my cruiser sits straight on the rack without having to turn upside down. Extra bungee cords are used to secure the front wheel from flapping and even piece of mind knowing your bike is secure. Definitely recommend...

    • @onesimpledad
      @onesimpledad  ปีที่แล้ว

      Thanks and thanks for watching