I love this machine. I have one, bought last year (in London) which I use along with a couple of Bernina machines. I love my Berninas but the 20u is so versatile. It took a bit of getting used to (I use it for free motion) but it is strong a simple. However I still need videos like yours to remind me of the basics and that I'm not missing something when I find something isn't working quite right. Today, thanks to you, I realised that my tension spring had slipped over. Thanks for your videos, from sunny (ish) England.
@@Chantillyandchocolate This is excellent for free motion quilting, however you need to remove the feed dogs, they do not fold down like they do on a Bernina. There are various feet available however I do free motion work without any feet attached. You do generally need to use a loop though to hold the fabric taut. To remove the feed dogs you take the plate off and simply unscrew the dog, then install a different plate. These generally come with the machine.
Thank you very much! I have a 20U73 and you were spot on with helping me! The manual was very difficult to understand because of the poor illustrations.
Hello I have a question. Thanks to your video I know how to use and parameter our new 20U-125C. But I cant find how to slow down the speed. Is it possible to slow down the speed of this machine for a better control ?
Thank for the video. I have this machine git it from a pawnshop, my problem is the sidewheel - where you use your hand. That thing is coming off when I start the machine, can I fix it, because the are two small empty wholes.
I have a much older model of this machine, funny how they look pretty much the same. So I am having trouble with my thread breaking at the needle, And the thread is usually sort of bunched and sort of shredded looking. I have adjusted the tension some but I don’t know if I need to adjust more or what. Any words of wisdom?
@@citysewing Thanks for the reply, I have determined that there were some rough places on my needle plate that you could hardly see but I sanded with skinny strips of sandpaper and seems to be working ok now.
I have this machine but not getting much use out of it. I’m having problems with the mechanical foot lifter inside the machine it’s self. The knee lift is installed properly but the springs located underneath the machine are absolutely stiff. It will move slightly when depressed using my hand. Of course the hand lifter raises the foot. Any help is appreciated. No one addresses this issue that I’ve found. Thanks!
Good day . thanks for the lesson. Sorry for the mistakes if there are any, I translate by Google translator. please tell me, I cannot create a zigzag stitch on the Zinger 20u33, the loop is made only on the left side, the thread is not captured on the right side, and as a result I get a straight stitch, I have been suffering for a week now, I bought a machine through second hands thanks in advance
Hi. You need to have a speed control servo motor to be able to slow down , if you have a clutch motor you will need to change your motor pulleys to small size that will slow down your machine speed . Ok meaning if you have a 4” pulley you buy another 1” size you will reduce your speed by 80% !
This is so short sweet and easy thank you so very much, very understandable❤❤❤❤❤❤❤🫶🏾🫶🏾🫶🏾🫶🏾🫶🏾🫶🏾✅️✅️✅️🇯🇲🇯🇲🇯🇲🙋🏽
I have never sewn before and I was apprehensive about learning my 20U53. Your instruction was clear and concise. Wishing you the best. Thank you.
I love this machine. I have one, bought last year (in London) which I use along with a couple of Bernina machines. I love my Berninas but the 20u is so versatile. It took a bit of getting used to (I use it for free motion) but it is strong a simple. However I still need videos like yours to remind me of the basics and that I'm not missing something when I find something isn't working quite right. Today, thanks to you, I realised that my tension spring had slipped over. Thanks for your videos, from sunny (ish) England.
Hi. Can we do free motion quilting with this machine? can we put the feed dogs down and attach a quilting foot?
@@Chantillyandchocolate This is excellent for free motion quilting, however you need to remove the feed dogs, they do not fold down like they do on a Bernina. There are various feet available however I do free motion work without any feet attached. You do generally need to use a loop though to hold the fabric taut. To remove the feed dogs you take the plate off and simply unscrew the dog, then install a different plate. These generally come with the machine.
@@cubworx7397 thank you so much for the help...
Just got 20U 190 used great condition. Finally you are one I've found can understand. Be watching more. Tku
Thank you very much! I have a 20U73 and you were spot on with helping me! The manual was very difficult to understand because of the poor illustrations.
very clear with the explaining... thanks much. Happy sewing!
Glad it was helpful!
Thanks for sharing the video and greetings from 🇧🇿
شكرا على الفيديو والترجمة متتبعة من الجزائر
Love your video. It's the best I've seen on this machine. Please show us how to change the knee lift set up for free motion embroidery. Thank you.
What is the knob on the left side of the machine?
Hello I have a question.
Thanks to your video I know how to use and parameter our new 20U-125C.
But I cant find how to slow down the speed.
Is it possible to slow down the speed of this machine for a better control ?
Thank for the video. I have this machine git it from a pawnshop, my problem is the sidewheel - where you use your hand. That thing is coming off when I start the machine, can I fix it, because the are two small empty wholes.
I hope you canshow how to set up20u singer machine for free motion embroidery
i will make a video this week please check back soon.
@@citysewing thank you in advance
This video was so helpful thank you 😊
Thanks from Mexico!!
Where can you buy one of these machines
Hello I have a problem my needles hits bobbin and breaks. How do I fix it?
All from South Africa 🇿🇦
I have a much older model of this machine, funny how they look pretty much the same.
So I am having trouble with my thread breaking at the needle, And the thread is usually sort of bunched and sort of shredded looking. I have adjusted the tension some but I don’t know if I need to adjust more or what. Any words of wisdom?
Sorry to hear that, maybe needle ti install corectly.
@@citysewing Thanks for the reply, I have determined that there were some rough places on my needle plate that you could hardly see but I sanded with skinny strips of sandpaper and seems to be working ok now.
@@marlawilliams6806 great ! Yesssss
Hello there. Can we do free motion quilting with this machine?
Does this machine work on (fake) leather?
I have this machine but not getting much use out of it. I’m having problems with the mechanical foot lifter inside the machine it’s self. The knee lift is installed properly but the springs located underneath the machine are absolutely stiff. It will move slightly when depressed using my hand. Of course the hand lifter raises the foot. Any help is appreciated. No one addresses this issue that I’ve found. Thanks!
Thank you 🙏🏽
Can we use twin needle with 20u43?
what is the thickness of the leather it can sew on?
What's Max size needles does it take
Good day . thanks for the lesson. Sorry for the mistakes if there are any, I translate by Google translator. please tell me, I cannot create a zigzag stitch on the Zinger 20u33, the loop is made only on the left side, the thread is not captured on the right side, and as a result I get a straight stitch, I have been suffering for a week now, I bought a machine through second hands thanks in advance
Hello, I have a Singer model 7285 on the screen written error E1 Can you help me?
Hi how can one slow down speed of this machine
Hi.
You need to have a speed control servo motor to be able to slow down , if you have a clutch motor you will need to change your motor pulleys to small size that will slow down your machine speed . Ok meaning if you have a 4” pulley you buy another 1” size you will reduce your speed by 80% !
Hi how much for this machine
Thank you so much
How do adjust the pressure
Excelente!! Tanks😉
Plz show foot adjustments also
we do,
Saya nak Machine Singer Chicago profesional is the Best nombsr one 😢😮😮😅😅😊😊😊😊😅😅😅😊😊😊
How much price this mechine
سلام عليكم ورحمة الله وبركاته شكرا جزيلا
Thank you
my 20u stop sewing it is lock and i don't know what to do i just started using it
Have you tried to tighten the wheel on the right hand side of the machine, the one you can loosen to spool the under thread.
@@hanneko7 i don't know which wheel that is but i will take look
i make a video about that this week,
Price
Good videos thank w
Why is the buttom thread puckering?
20u43.