The Junk-Yard Yamaha Blaster Quad Is Assembled. Will It Run?
ฝัง
- เผยแพร่เมื่อ 13 ก.ค. 2021
- I get the assembled engine in the Yamaha Blaster and attempt the first start. #Yamaha, #Quad, #2stroke,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►FORUM: 2vintagerider.com/community/
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot!
Check out my Instagram: 2_vintage_ I just picked up a new quad!
Thank you for all the support!
If you sell it lmk . would u ship it to NY? ....i think you would be able to strap it to a pallet
Dude has come so far, two years ago he couldn’t even ride a 2 stroke , forget working on one. He’s gotten to know a lot of different machines too.
you use 80-90 gear oil in the transmission not oil i’m a small engine mechanic
These older, cheaper quad videos are my personal favorite. It is basically what my son and I do in our garage at home. Good work dude.
Make a video on how to find good finds on used quads and dirt bikes.
yeah😂
yes please
He already has
You just have to keep looking marketplace everyday. Scrolling for hrs. You’ll come across them.
Dont live where u live
My Blaster had the same issue, turns out the oil pump wasn't consistent enough to feed oil and smoked my top end. I wouldn't trust it, cap it off and mix it.
Learned that with a 1980 Honda Express scooter. Same deal.
Yes sir! We just picked one up…needed a top end….so I asked the previous owner if he used it 😂 needless to say it’s now capped off
Did you bleed it and did your throttle cable have the correct slack, or lack there of? I don't mean at the accelerator, I mean at the pump it self. They're actually quite good, as long as you use good oil and make sure it never runs out, and if it does, bleed it, it keeps the mix at the correct ratio for any given rpm.
@@GameMen10000 blocked my oil pump off I run caster 927 32:1 just recently took my top end off just for the hell of it and after 2 extremely hard years hundreds of hours that top end was absolutely perfect never had that kind of luck with oil injection on my blaster
never trust the injectors
I just want to say your so underrated. You literally put so much effort into your videos and you can fix any engine which amazes me. Keep it up.
yeah remember that rusted ou Kawasaki mule with the cracked piston
Yup it sounds like a Blaster,and like popcorn popping lol👍😅...
GOOD JOB, IVE WATCHED YOU FOR A LONG TIME, you are actually getting better!!
❤️
I love the way you explain in slight detail of some of the things that you’re doing is very instructional without being boring thank you so much I’m a retired 64 year old grandpa and I like working on these things a little bit I’m planning on setting me up at my shop to handle these ATVs I’m living down here in Texas a lot better weather than Wisconsin most of the year though it does get hot
Got a couple project blasters myself. Enjoyed the heck out of this video
17:41 when he sprayed wd-40 that little drip on the left tryna make its way into the brake pads 😅😅
Great video I’m more partial to quads and trikes but I love them all!👍
Fired RIGHT up! Nice work!
Great video and overall content! I defenetly subbed.
Thanks for subscribing!
It’s one long cable for the parking brake and foot brake from oem it’s common to delete the front portion and install the short cable from pedal to caliper. Which i believe is what you did.
That brake is exactly like the fl250 odyssey inside. I was amazed. Pretty cool quad. Great you were able to save it essentially.
I would totally buy that thing when it's down. Looks awesome with the black and red. Would put the red shocks on front also.
That wd40 cleaning lapse was super satisfying watching it get shined up, you should throw more in! Otherwise its a neat little quad👌👌
at 26.54 when your checking if the oil pump is working u can see you spark jumping from the head to the exhaust :)
Good eye
Just got back from football practice
This is a good thing to come back to
I had a blaster as a kid, they always have a special place in my heart.
They’re a fun quad to ride they ain’t the fastest they’re not the most powerful but they’re super light & a blast to run around
@@Jboost412 yup, and for a 13 year old just learning how to ride, it seemed fast to me.
Great video man keep up the good work
Ditch the entire oiling system and run mixed
+1
I don't understand why they had the oil pump system to begin with.
When I had my blaster it worked fine for the 7 or so years we had it
Your the man Joe!! Been watching for ages
I just helped a friend get one of these running again today
You need to watch it back I could see sparks arc to the frame.keep the content coming 🇮🇲🇮🇲🇮🇲🇮🇲🇮🇲🇮🇲👍
Good job bud 💪🤙
The wires on the oil tank are only for a low oil level indicator light and the parking brake cable goes to the footlever
More LT250 builds!! Maybe engine rebuild?!love lots!!
Great job homie 👍🏻
Nice job joe!
Nice one Joe ( UK here )
Youre an inspiration for my wrenching! but i have a question and need help! i have a 97 RT180, its my favortie bike, it runs well and goes through all gears, although feels as though the kickstart doesnt have much pressure when i kick it. do you believe it has low compression? also, the factory paint is on many of the bolts on the bike such as fork hardware and engine mounting hardware, indicating it hasn't been rebuilt. if so should the entire case be split? or begin with taking the jug/head off and start by checking rings? what would you begin with? thanks!
Check out your intake manifold that’s in between the carb and engine, could have a crack in it
Yeah tht's the parking brake, you hold the button down while that little black lever goes in the gap to hold the brake on
For future reference: you can place the gasket on the engine side’s dowels before placing the cover on, ensuring a good fit
Dude just found ur channel yesterday and you repost the second part nice!!! Subd
Good looking quad
You should do some more RM builds those were great vids!!
Did you put a hose clamp on the intake boot ?
I just did a blaster project myself. You should deffinetly do the TORS system delete and the oil pump delete and mix the gas 32:1. They run so much better that way. I also successfully deleted my ignition completely because the previous owner lost it over the 7 years it sat next to his barn and didn't run. Fully rebuilt my engine too
Omg damn you did a really good job keep ur good work up stay safe
Nice work
Good job bro
I got mine for 1600 and in great shape mine is a 1991 just road it today in Rocky point Sonora Mexico did great
what kind of transmission oil did you use ?
As much work as you do on these bikes, it's crazy how you work on the ground (i.e., getting cover ready with gasket and working on carb).
Its garage wrenching done right.
That parking brake cable you can just remove now that you put on the shorty cable. The original cable hooks on at the foot pedal then goes all the way to the brakes. I just did this on mine a few days ago.
Thinking of getting a trx450er 2008, are they reliable?
The mystery cable is a parking break you can toss it you have the shorty break cable so you can just pull it off 👍 also when you took apart the caliper that white tab is adjustable so you can set the pressure on the pad if you pull the whole thing out you can screw the little stub all the way back the white dial ratchets down to set the depth just a little fyi I had to play with it a bit on mine 👍
My blaster had the same problem with the reving up my problem was the base gasket on the motor broke and pushed out and caused it to rev up.
Did you spray the base gasket of the cylinder? Maybe no air filter is giving it too much air also but i doubt that. I remember riding that same style purple blaster with my best friend growing up. It was new back then though. It's a ripper!!
Do you know of it has the tors delete?
Good video ☺️📸
You should just finally be sponsored by WD-40.
Check your carb slide my 2 stroke atv did that and found the carb slide wasn't screwed on all the way
Man your so good at this type of stuff you should do a yamaha yz250 or yz125 project
You should paint the frame
You have spark from head to exhaust!! When you checked THE oil pump
Love blasters. You'll never get mine 🤣💯
All the good Yamahas use a Br9es or Br8es plug. Gotta love it
I miss my 1988 blaster got for Xmas
You got lucky with your ebay key, last time I ordered one from there it was wired back where off was on and on was off, so everything I went to start my battery would be dead.
do a leak down test. If theres a leak youll have to spray soapy water on the intake, cylinder ect. If theres air bubbles you found the problem spot. Most leaks happen around the intake boot by the reeds
@2vintage how do you find these cheap bikes ? Wats your cheat code
I have the same exact year 👍
Nice! How do you like it?
@@2vintage love it…mine has some upgrades though…240 big bore 32 mm carb Fmf pipe/silencer and V force reeds…it’s about as fast as my 02 YZ 250 so it’s not slow 🤷🏼♂️….but yeah it’s a blast (pun intended)
Could of used the blade at the end of where the old gasket broke to scrape it off bit more elbow grease 💪🏻
If you lose your key for a blaster or banshee, you can unplug the 2 ignition wires and it will start up.
The headlight has the warning light for the oil injection.
I’ve got a blaster there that I’ve completely rebuilt and fires up but smokes heavy changed the oil seals and still smokes now it’s just tossed in the shop in a corner considering the only thing I can think of is a bad case
Thats very rare. Check oil ratio or you could be running to rich
Try sc1 it makes old plastics shine
Nice video! I noticed you use wd-40 cleaning stuff. Are there any advantages? Because I also thought that wd-40 attracted dirt
I do that too, just ease of use to clean with. Typically you'll need to protect metal rustable parts with an oil or wax to prevent rust in the long run.
All the ignition lock does is shorts the coils to earth like the kill switch.
Joe those rims are originally yellow not red u got a 1995 run that vin# if u can still see it..purple plastics came on 1995 with yellow rims
The boot between the carb
I think I saw your cylinder head shocking the frame. Saw sparks when you put the camera close to the tranny to check if 2 stroke was pumping through
THE PRICE of Blasters out here in CA has gone up INSANE.....For a drum brake quad
Fr people thinking like they got banshee or some
@@Guadzilla459 yea desperate 2 stroke people. Doesn't handle like my LT 250r quadraceer. and sure nothing near the power. But mine is tricked out.
Im in cali and just bought a blaster with a blown top end for 450$
@@dabtech7456 you still got ripped off I got mine for 200$ running just had to clean carb but now I got a lt 500quadzilla doing A rebuild on it rn
@@Mikefngarage oh yeah line them up then lt 500 vs 250r
Get it back to purple its the 80s thing to do ..👍😁🇨🇦
2v timeeee!
I said it would run 👍🏻👍🏻👍🏻
If you didn't sell any of the quads you have had how many do you think you would have total? lol I've seen you work on at least 50 so... Love your channel man!
Try sc1 it makes old plastic s shine
Make it purple again all them blaster has cool crazy colors
As I said in previous video you need to aneal the head gasket first that’s probably your issue
Anneal. I read your post like "anal". 😀
Shouldnt need softened, proper torque wins the day.
Delete the tors system. New cable and cap for the carb. I did that to my blaster and I switched over to hydro front brakes. Much better. Kinda miss the old fmf fatty sound of mine. But it was just to small for me 6-2 200lbs lol
For sure Blaster was my first quad in high school. First thing I did delete the T.O.R.S. system complete garbage. My blaster had full DMC Alien exhaust was pretty sweet.
I HERE CRANK BEARING NOISE!!!!
Use paint stripper on the gasket saves time and gasket maker
In my honest opinion junkyard finds and auction buys will always be better then buying new in my opinion
Ditch those ugly heel guards and get some cheap nerf bars. Also they used to make a 2 inch extension for the swing arm that was pretty inexpensive. Keep up the good work 👍
You should race the 250X and the blaster
My blaster will go into gear but not move, any ideas what it could be?
Clutch
2vintage order a top end gasket sounds like the top is leaking
Hey joe I really need some help. I have a 94 cr125 and for some reason it won’t start unless you kick it over for hours it has spark and it’s getting enough fuel but when it does start it runs terrible and after about 5 minutes of it running it shuts off
Needs a top end
@@Josh-Rc-more no it don’t it has a fresh top end rebuild
Weird did u try and test your coil or stator
Road/trail test soon????
Good morning ☀️🌄 from Greece peloponnese island 🏝️ town Aegio guys, well I had issues playing that video 🎥 last night and yesterday in total, something with TH-cam Channel or the codec or the video settings on upload I don't know what but on Android 10 Realme C11 smartphone , had some lags in here but that video 🎥 don't wanted to play ▶️ . Anyone else have the same issue ?? Good work with your channel and content and quality of video and sound editing and rendering and posting , nice bikes and rare stuff too .
Hey,I have a Blaster and I wanna help You. Dont use the oil pump.Sometimes the pump doesnt work right and then is the engine damage.Put the Oil together with the Gasolin in the Gas Tank!If you do this nothing can happen with the engine...
26:00 where does that oil line connect to? I'm trying to rebuild my blaster and it would help a lot thanks.
The oil pump. Some people like to take them off and mix their own gas.
@@wallpaperman9051 so the other end doesn't connect to the carburetor?
Try either connecting the other side to the carb or oil
tank, if not, I got no idea. Probably oil tank since the oil pump lubes the engine with 2 stroke oil instead of mixing your own gas and the oil tank supplies that oil.
Yamahas website also has diagrams for every specific part. Just go to parts, type in what bike you have, and it’ll show you everything.
@@wallpaperman9051 thanks bro....the last time I went to the yamaha website I got a load full of random music instruments 😂😂 BTW thanks so much for helping out anyway I've reached out to a lot of people and you seem like the only person who responds accurately❤
Is there a rad on there ??
Try turning fuel off and holding throttle open and kick
Next quad you get should be a Yfz450
@Whoop!!