With 10 years warranty we have done axle repair | New truck axle broke on road which was repaired |
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2022
- #With10YearsWarranty# weHaveDoneAxleRepair New truck axle broke on road which was repaired
#engineering #pakistanitruck #technology #axlebolt #repair #truck #trucks #trucking #reels #amazingtechnology #amazing #amazingthings #amazingthingtechnology
Там только "бампер " передний наверно тонну весит. В этой стране, с такими мастерами у машин нет срока эксплуатации, никогда им не попасть в машинный рай.
Сварщику стул купили, но всё равно на корточках.)
Наверное сам сварил, ему можно.
Уних бригадный(клановый) подряд. Сварщик разные.
Скажите кто нибудь им , что бы не ломало мосты - ГРУЗИТЕ МЕНЬШЕ В СВОИ МАШИНЫ И СНИМИТЕ ВСЕ ПОБРЯКУШКИ , ВЕСЬ ХЛАМ . Тонны три лишнего груза возят ввиде декораций .
Не вариант, цыган стайл в крови.
Такая культура . Раньше они были буддистами , память осталась .
Вечный перегруз - вечный ремонт... В чем смысл?
Все при деле
If they not overload they can not make this type of videos. It has reason.
Так выглядит Стабильность.
меня удивляет наличие у них монстроального оборудования, на каждой улице что ни двор то сто или цех какой-нибудь,и станки времен царя гороха ,и причем все ушатанные но работают.
Может потому, что нет регистрации компании, контроля, разрешений, требований, ограничений и т.д., а все желающие просто спокойно работают.
@@mirotr2 может потому и живут так плохо? Никто же не считает скольких умельцев накрутило на станок и сколько погибло в авариях на таких прекрасных авто.
do uou know what i never see . is this repair in place . its awsome you can repaire everywhere everything Bravo
Excellent job Guys!
Keep up the great work/channel!
10 years or 10 miles - whichever comes first.
Life long warranty, if you know what I mean 😂
А сколько тонн вы грузите, что аж мосты ломает?
У них весов нет ,пока не лопнет ,тогда скажут перебор.😁😁
Грузоподъёмность машины 8 - 10 тонн , а грузят 20 .
@@Alex_Ander77 Не смеши , парень ! От 20 ти 10 тоннику вообще ничего не будет , проверено в России . Рессоры в обратную сторону выгибаются , но работают . На канале " Pakistani truck " озвучивали массу груза на такие 10 тонники : 55 тонн цемента ! Как им не сломаться ?
@@user-dv1rg7oq5r Вот это уже реальные цифры.
I love watching your video’s you guys know what to do and it’s all done with any effort and everyone gets on with the job.
The way you guys work under the wagons you wouldn’t be able to do this in the UK as health and Safety would prohibit you doing this with out a lot more safety procedures been carried out, you guys work in a different kind of environment than we do in the Uk.
Well done to you all for your excellent work and commitment to your job.
Мало весу в машине,они ещё добавили, сразу рельсу 65 приварить может постоит.
You all doing great work.Brilliant Talent.
Please use some more safety to prevent accidentally weight falling to this talented mechanic. (Good tree stumps are not expensive-few jackets are not safe )
Doesn't surprise me it broke with the way they slalom them aggressively down the road.
С этими ребятами фраза «пожизненная гарантия» обретает новый смысл
Super engineering works 🙏👍
I never thought that blade would ever look that good
tolle männer, echte spezialisten !! die können was, alle achtung ! perfect work, prima !!!!😀😃😄😁😎
Esse pessoal são muito incríveis são muito bons para solda e na usinagem de qualquer peças parabéns queria saber pelo menos um pouquinho do que Elis fazem parabéns são de um lugar sofrido tudo é muito difícil parabéns 👍✌️
Este video no es ningún ejemplo de cómo se deben hacer las cosas.
DAVÍ E WELINGTON.ESTE DOI SÃO ENTENDIDOS MESMO.PARABENS!!!
Esse pessoal são muito trabalhador e são feliz e sabe aproveitar u que deus deu pra Elis a sabedoria.adimiro muito vocês que deus abençoe sempre vocês 🙏🙏
Good job, solid repair, and if I understand it properly, if the truck owner gets another ten years out of this repair as he did with the first he'll be doing well. Well done ✅👍.
thanks
Wrong WELDING rod!
those ornaments give me anxiety a hives
Респект 👍👍👍
Very very talented boys
Amazing work😍
Thanks
I really admire you to send greetings from Vietnam
I like how he squats on the chair at 5:01 instead of sitting on it with his ass.
This basically sums up every pakistani worker.
😂 ikr? Gets a chair... squats on it like the 🦧 he is.
love that chisel they made
Most likely resulted from over loaded freight plus mediocre roads excellerated damage
Бля где то болгарку раздобыли🤔.обычно все напильниким делают.
for being such intelligent people they (truck owners /drivers) always ignore the gross weight the rigs are allowed to carry. this is a common occurrence whether it be a truck, car, bicycle, or burro.
They can't be intelligent if they can't follow simple logic
maybe a bigger radius or some webs at the crack site would stop the cracking?
Pakistani people so hard working for daily Breads
Saluti a tutti da Roma 🇮🇹🤝
Bella !
AMAZING.....
Да уж,технологии удивительные.
Amazing workmanship !!!
You all have amazing talents !!
Great job 👍🏽🇺🇸✌🏽
Excellent Work 👍 👍👍
Thanks
Nice work
Thanks
👍👏👏👏
The weight of all the add on crap they put on them trucks is no wonder things break
Parabens, muito profissional, admirável.
Very Very good Job congratulations, It is worthwile tô see, I like a Lot to see your work !!! God bless you ALL,!!!
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻vcs são muito bons, grandes profissionais, abraço aqui do Brasil 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻Deus os abençoe 🙏
13:90 shows a non-factory weld on axle end?
Welding in 2 different directions, on the same weld?????? I'm sure that looked like a perfect weld...... To Stevie Wonder maybe.
На 2 поездки хватит!
I think for only one. I would like see finished repaired part of truck. I think they are not able to finish the repair.
The Pakistani worker believes in waste not want not, but I wonder what type of damage would warrant replacing that axel. These repairs and especially by the man in the glasses are next to new.
😂
We’re is the elephant?
It's hard to believe a piece of 4 x 5/16 flat would give much strength?
Maybe a flame cut piece of 1/2 or 5/8 plate welded on edge woud give greater strength?
That is more like 1/2 Thick. Gives plenty of thrength. Stronger then the axle it's self because those are cast Iron, the repair is appears to be some sort of spring steel.
Nothing amazing here! Everything broken due to massive overloading, sketchy bottle jacks to lift it, how often do they get hurt since they likely do this every week or two
To the same vehicles no less
Awesome looking truck 👍
With all the reinforcements don't they add weight on the truck?
na primeira viaje eles já carrego o dobro da lotação do caminhão eles quebro tudo
И что она сломалась то ? Она же железная .
Why add extra weight in front of cabin?
Effect on truck pay load
Payload? The payload is everything they can load.
São todos inteligente mais esse moço que usa óculos e um gênio
😂
very good
Thanks
👍
The definition of insanity is doing the same thing over and over and expecting a different outcome.!!!!!!
So what, labour is cheap, parts for them are probably prohibitive cost, and even off available they can't afford to wait months to have them, the truck needs to work otherwise they don't eat. Why do you apply our "first world" standards to these folk who know how to "fix" things rather than being "parts exchangers" like many of our technicians/mechanics are today?
It’s the economics, stupid
Roger Milliken... Salam dari Indonesia
Just think, Hino speced that axel to carry x pounds of weight, doubled the weight capability when manufactured and when sent to Pakistan it gets broken in half!!!
Load until nothing further can be piled on then send out on potholed roads...it breaks.
look at those spring packs..... they should solid mount it..... 🙅😬🤨
These axles are only breaking in Pakistan because of overloading,but the repairs are solid the job is well done they have "DONT THROW AWAY" attitude here in Europe everything is thrown away no repairs appliance are not repaired
Because these types of repairs are extremely dangerous. No one but these primates would even consider risking their lives riding on this garbage
Just adding leafs doesn't make overloading OK....
Бампер Легонький..
RESPEKT !!!
ما شاء الله
И это тоже ПЕРЕГРУЗ..........................
caused by overload！
Yes, these trucks need more spring packs for heavier loads 😂
Safety Sandals
WRONG WELDING ROD!
👍👍👍👏👏🙌🙌👉🙏🙏👈🙋 salutations à vous 🙏
Hello friends, let's create great and meaningful videos together🥰🥰🥰
likes forever
ill put my money on it bending again seeing as once it bent the first time it lost is structural integrity and that little strip you put on top isn't going to stop it from happening again. nice try though.
They never straightened it out to begin with. Plust they put the reinforcement plates flat on the bend...not edgeways where there is actual rigidity to them. 😂
Чулок бессмысленно варить, он рядом со сваркой треснет
Abnormal pir daun,bobot truck yang sangat berat karena kebanyakan variasi yg tidak penting,kelebihan beban muatan dan bumper depan yg sangat berat !
Я всё равно не понимаю как эти парни работают с дуговой сваркой босиком и голыми руками,???? Тут бля в брезентовой робе берцах и кругах обжигает
Part 2...🙏🤗
After watching Kurtis from Cutting Edge Engineering do what he does, this is like watching a bunch of little kids with tools who don't have a clue what they are doing. Damn thing won't last a week!
Hopefully they get a chance to watch Kurtis
These guys have the average IQ of 7 to 8 year old children in the west. No kidding
let's interchange tools and see what Kurtis can achieve with basic tools.
Simplemente estraudinarios excepcionales los felicito con un gran saludo y abrazo lo mejor de lo mejor
How much did it cost ?
I would imagine that it was free as the title said 10 Years warranty.
Done for nothing. Till day, when they will understand, that 30 or 40 added leafs are not a spring suspension...
you don't know shitt
What's all that stupid crap out the front of the truck ?
that system keeps aliens away
Hello, dear, workers! Good day! In a good way, such cracks must be detected by ultrasound equipment: there are cracks hidden are not visible by an armed eye; The Russians have such equipment and technology!
Здравствуйте, дорогие, рабочие люди! Доброго дня! По-хорошему такие трещины надо обнаруживать ультразвуковым оборудованием: есть трещины скрытые не видны не вооружённым глазом; у русских есть такое оборудование и технологии!
The Russians use Western technology.
@@FairladyS130 Yes, the Russians use the technology of the gods!
most hgv mechanics do
I've seen that dude on many videos doing many different things, he must be the go to guy in that area.
That's what my place called #formen can fix everything..
Bro he's literally had to repair his own garbage multiple times in these videos. He's a caveman
خران هیچ نمداند این چند وزن گنجایش دارد میبرد
No safety shoes/goggles/gloves...
Shit up
No Good welder
What the hell is all the shit hanging of the front of truck ...is it a religious thing
stupid repair, load the machines too much,
10 years warranty?
In 10 years none of this workers will be alive.
Aside from the fact that most of us won't be either thanks to our stupid politicians and ignorant public! It's a very sobering thought Horst!
It‘s life long warranty
Front axle band removal th-cam.com/video/Cn92hZDIOCM/w-d-xo.html
👎👎👎
Это Украина!!!
thats a shit job replace it
That's awesome
Bricolage 🫤👎