Thank you so very much, Fast Fix, for posting this! When my door handle (2001 Tacoma Base - 256K miles) finally gave out, I wasn't sure who to take it to to get fixed. Then I happened upon your video. Great pace, great instruction, great shots of the work you were doing. Gave me the confidence to do this myself. Decided to change out my speakers at the same time - a nice 20th birthday present to my beloved little truck which I purchased in July 2001.
Wow, you’ve made good use of that truck! The one you see in the video was a 2004 I believe. It was just traded in a few months ago. Had roughly 200k on it. Great truck except for the door handles! Glad the video helped you. I hope your parts last a while! I found better luck with the more expensive door handles. Just FYI if you bought on the cheaper side. Thanks for the comment 👍
I purchased my 2000 Tacoma new that same year and still own it. I have a second vehicle that I drive at least half the time so much Tacoma sits in my driveway a lot and I have had no less than six people leave notes on it or come to my door wanting to buy it
Just changed out my door handle followed your directions step by step. Thanks for the clear, accurate and nicely videoed instructions. Made this job much easier.
This was by far the most direct, easiest to follow instructional I have had the pleasure to need. All in all, it took me 15 mins to replace my handle with no issues whatsoever. Thank you very much.
This is the very best video posted regarding changing the door locks. I just finished changing the door locks in my 2001 Tacoma Prerunner and I used this video as the guide. 100% success. Thank you for this fantastic video. The locksmith wanted $375. I did this job for $35.
Thank you for the video! I literally just broke my door handle this morning from a frozen door. I was hoping there was a solution and your video it’s very informative and gives me the confidence I think I can get it fix myself
Dude, thank you for your excellent video on how to replace the door handle! I followed all your directions and I replaced the handle! You saved me a lot of $$$! Keep on posting your excellent videos!
Excellent demonstration! I have a 2001 Toyota Tacoma Prerunner SR5 that my mom bought brand new. Since I've had it the past 12 years, I've replaced both front exterior door handles once. This is my second time replacing and needed a refresher on how to. After watching this, I remember what we did last time, and your list of tools at the beginning was very helpful. Thank you.
You’re welcome! Glad this video could be of help. I appreciate the comment. As much as these break, it’s amazing we’re all not pros. I’ll have to watch my own video over to get a refresher for the next replacement. Cheers!
Perfect! Saved the Day. My buddy broke my handle today and offered to pay for it. After a few free beers from him, we did it ourselves thanks to your video. Thanks man, cheers!!
Pro tip! Don’t forget, the point you really need to lube to help keep from happening again is at the linkage above the door latch/locking mechanism (straight below the handle links inside door). That is the binding point on most of them and make that all buttery smooth and handle less likely to break.
This is it. My new handle wouldn't even work until I did this and then worked the inner handle back and forth 25 times. Now its smooth as granny's caboose! So not that smooth but much smoother.
Thanks so much! I did this last year. Now 1 year later I must do it again. Done buy cheap handles. I just paid for OEM and I should be installing today.
Hello. Yes definitely by the expensive OEM ones. The remanufactured ones or offbrand versions only last about a year as you’ve discovered. Best of luck for the future!
Thank you for taking the time to make this video! I replaced mine today, after watching your video! Thanks a lot. Now I need to know how to fix my door lock on the back door it keeps sliding down when I open the door. If you try to shut the door it hits the medal bar on the frame. I have to slide it up every time before I shut the door.
Hello! I’m glad this video helped! Thank you for taking the time to comment, I appreciate it 👍👍. As far as the rear door lock, I have not personally had any experience with them, but I’d start with removing the door panel and inspecting the connections. More than likely, a rod is bent or not secured well to a clip. Just have to open things up and look around. Sorry if this doesn’t help much. Best of luck!
Great video. The reason I’m responding is my 2002 Tacoma needs a new door handle. And with your video I think I can do it without much trouble. Thanks again. I think I’ll go to Toyota to get a new one because doorman parts like this don’t last as long.
Hello. Yes, absolutely get the factory handle from Toyota or spend the extra money on a more expensive aftermarket handle. In my experience, the cheap replacements only last a year or two. If you’ve got some mechanical experience or just a little inclined, you can absolutely do this yourself. Just set aside some time and keep this video handy 👍 Thanks for the comment!
Got it changed pretty easy. Although I did add jb weld on the stress points of the new one before I put it in. And I jb welded the old one for a spair see how long it lasts. I’m the only one that drives this truck so I take it easy when I open the door. No yanking on the handle it isn’t necessary to open it.
Great video! Had to destroy white clip w needle nose as Rod would not pull out of old handle. 1st time Changing out 20 year old handle. Door panel clips broke but auto parts stores have these. So happy now! Only negative is my 10mm socket is in door now. Looked all over and not at bottom. It's over on door opening side but can't reach and no luck w magnet. If new to this, just watch video over and over. I'm back in business. Thank you!
Thank you for the very detailed instructions. I don't work on vehicles much. Great job and Thank You. I got both of mine changed perfectly without paying garage prices...
Hello. Fantastic! Always great to hear a success story especially when it’s someone who has relatively low experience working on vehicles. Nice job and thanks for the comment 👍
good vid! More advice for you out there....your handle likely keeps breaking because that dang linkage inside the door to the handle rod keeps binding. You can see it going down from the handle and connecting to the inner hand rod. Spray the mess out of that linkage with your favorite lubricant. Then work the inside door handle rod (the one that is parallel to the ground when you have the door panel off) back and forth 20-30 times to really get that linkage working smoothly again. My new handle wouldn't even work until I did this and now it's like new. Also to gain accesss to the bolt closest to the door edge pop off that little rubber piece then you can stick your socket extension in straight. Don't know if that was mentioned in the vid. Happy wrenchin!
The latch on my tailgate was not working so I took it apart and was able to use jb weld to fix the broken part. It was metal to plastic so the repair was easy. I think it should last a long time. The tailgate doesn’t get used as much and I’m gentle with it when I do open it.
BEST VIDEO FOR THIS JOB! I've watched four of these videos today. This one has the most detail regarding the two rods that hook to the lock mechanism and handle mechanism. thank you kind sir!
Thank you for sharing. This is an excellent video, listing the tools right in the beginning, as well as links to useable resources. Absolute gem. Thanks again man, appreciate you!
This is an 8 minute video but it takes 3 hours to accomplish this task! It is also great if you have a lot of patience, and long, thin fingers. Got it done, good instructions.
Hello. Yes, the videos never tell the full story of the process. Just so you know the “fast” in Fas Fix is a reference to the expediency of the video helping the viewer get the job done properly and not necessarily in reference to the job itself. Lol, yes long skinny fingers to help quite a bit. It’s weird, but I hear that comment a lot and maybe I should mention it because it’s very true. Thank you for the nice words too 👍👍👍
Recovering from new truck fever,decided if my rust free 2002 can make it to 400k might as well go for 5. Restoring it to new and this is job 1..thanks man., subscribed.
Wow, rust free at that mileage is crazy! The truck in this video was soon discovered to be unrepairable due to a rusted through frame. It’s now probably a scrap heap somewhere. Considering prices right now, I’d hang onto that truck for as long as I could. To the moon! Or 500k 👍
Thanks so much, bro! I got a 1999 and the door handle on the driver's side broke off in my hand. I just ordered a new handle from Amazon and checking out your vid right now on how to do the replacement. I plan to do it this weekend. Later!
Hello. Bummer on the door handle, but they’re all on borrowed time. Best of luck with the repair! Thanks for the comment 👍. Feel free to let me know how it goes.
Thank you for this great video. My part came in today via Amazon. I changed it out in about 30 minutes. Taking it apart was way harder than putting it back together. I definitely would not have tried it myself, if it wasn't for this video ,thank you! Much love from Central California 😎
Hello. Yup, it’s definitely a common occurrence. That was the third set of handles installed on that truck. Best of luck on the repair. I appreciate the comment 👍
Great video ! Very informative & super easy to follow. I’m amazed at how you were able to get all of the finesse interior work all on video. Awesome job !
Better than the other video I found... Clearly explained and with good videography and tips along the way. Thanks! (wish me luck in a few days... Waiting on the replacement).
Thank you very much for the very informative video… I took on this project this afternoon and replaced my driver store outside handle… And thanks to you it went very smoothly!
Thanks for this video. It saves me some time. Borrowed my father’s truck and it broke (20year old plastic) and he yelled at me anyway, so I am fixing it. Got a genuine handle on eBay, hopefully lasts another 20.LOL
@@FastFixTH-cam I installed it today. I had a bit of a problem getting the thicker rod off the door handle. A heavy duty hook tool made quick work of it. I used wd40 as you suggested to clean the lock and then used that lock ease stuff with the graphite because the WD will evaporate after. While. The WD also made quick work of removing grease I got on the white paint on the truck. Thanks again, your advice helped me do the job much quicker-at work on my lunch hour! I still wonder if it just cracked or if it was vandalism… 500 plus sold on eBay, so probably just plastic fatigue after 20 years.
Awesome, glad the repair went relatively smooth. Yep, it’s fatigue. They break all the time. It’s a common problem. Thanks for all the comments! Much appreciated 👍
You did a great job explaining. I was able to do it almost by myself. My door won't unlock with the key but I don't even care at least I have a door handle 😅 thank you!
Thanks for the video. Just did mine a little while ago on both doors '01 tacoma prerunner. The only thing that I struggle a bit was the re-installation of the plastic latch back to the metal rod that connects to the door latch from the inside of the passenger door. The metal rod was kind of too short to re-insert to the back of the release handle and you've got just a little room to slide back the plastic lock that holds the rod. It's a bit challenging but definitely consider it a "Fast Fix!" Thanks again for your great video.
The aftermarket handles are trash this is my 3rd set I've gone through in only a few years. I watch these videos every time I have to replace them even though I've done it before the videos are great!
Glad to hear it helped even though your a hardened pro! Agree on the build quality. I sprung for the more expensive handles this time and they’ve now lasted a few years 👍
Did it this morning. Great video, great instruction! Everything went like you said. You might want to add your list of tools/parts. The connectors. I broke 4.
Just replaced mine for the 2nd time. The cheap 1 lasted 8 months but hopefully the Dorman will last a bit longer. Thanks for the great tips and tool links.
Yep, sounds about right. The cheap ones don’t last long at all. This is the 3rd door handle on the truck. Hope the nicer ones lasts longer. So far so good!
Great video. Thanks. The only instruction missing was that the inside door handle needs to slide towards the front of the door. I thought it must just pop out, but there are tabs that must disengage by sliding the inside handle forward a bit.
Hello! Best of luck! I hope I didn’t make it look too easy, but in my opinion, it is something most can do. I have heard people with larger hands have more issues, but other than that, pretty straight forward. Thanks for the comment!
Good instructions. Only improvement: would definitely recommend having 9mm Door Trim Panel retainers on hand. These hold the interior door panel to the door and several will break when you pop the interior door panel off.
This will be my third time replacing the handle. Dealer wants like $90. Went cheap and bought off eBay. They tend to last 2-3 years. At least the last one had a warranty. Should be an expert by now but always need to refer to a how to guide. You make it look so easy.
You are welcome! This is the 3rd handle on this truck. The last two were cheap. This one was $50ish I believe. We’ll see if it lasts! Thanks for the comment 👍
I just did it step-by-step and it worked great. I had to do this on an old Chevy one time and learned the hard way that you have to roll the window up in order to access all the stuff inside the panel. Fortunately I remembered that this time. Thanks again that was a lot of help 🙂
Thank you so very much, Fast Fix, for posting this! When my door handle (2001 Tacoma Base - 256K miles) finally gave out, I wasn't sure who to take it to to get fixed. Then I happened upon your video. Great pace, great instruction, great shots of the work you were doing. Gave me the confidence to do this myself. Decided to change out my speakers at the same time - a nice 20th birthday present to my beloved little truck which I purchased in July 2001.
Wow, you’ve made good use of that truck! The one you see in the video was a 2004 I believe. It was just traded in a few months ago. Had roughly 200k on it. Great truck except for the door handles!
Glad the video helped you. I hope your parts last a while! I found better luck with the more expensive door handles. Just FYI if you bought on the cheaper side.
Thanks for the comment 👍
I'm replacing my 2001 door handles as well. I'm not too handy, so door 1 took a while, but door 2 will go more quickly.
I purchased my 2000 Tacoma new that same year and still own it. I have a second vehicle that I drive at least half the time so much Tacoma sits in my driveway a lot and I have had no less than six people leave notes on it or come to my door wanting to buy it
Just changed out my door handle followed your directions step by step. Thanks for the clear, accurate and nicely videoed instructions. Made this job much easier.
Great to hear! Thanks for the nice comment 👍👍👍
This was by far the most direct, easiest to follow instructional I have had the pleasure to need. All in all, it took me 15 mins to replace my handle with no issues whatsoever. Thank you very much.
Wow, fantastic! 15 minutes is fast. Glad the video was helpful. Thanks for the comment 👍
This was the very best video that I watched for replacing my door handle!! Very informative! You saved me a lot of money! Thanks!!
Very happy to hear that. Thanks for the comment 👍
This is the very best video posted regarding changing the door locks. I just finished changing the door locks in my 2001 Tacoma Prerunner and I used this video as the guide. 100% success. Thank you for this fantastic video. The locksmith wanted $375. I did this job for $35.
Absolutely! Thank you for this comment. Love hearing how it helps. Glad you got this done on the cheap!
Thank you for the video! I literally just broke my door handle this morning from a frozen door. I was hoping there was a solution and your video it’s very informative and gives me the confidence I think I can get it fix myself
Hello. Yes, totally doable for the average wrench! Glad the video helped and best of luck! 👍
Dude, thank you for your excellent video on how to replace the door handle! I followed all your directions and I replaced the handle! You saved me a lot of $$$! Keep on posting your excellent videos!
You are welcome! Your comment is much appreciated 🤙
Excellent demonstration! I have a 2001 Toyota Tacoma Prerunner SR5 that my mom bought brand new. Since I've had it the past 12 years, I've replaced both front exterior door handles once. This is my second time replacing and needed a refresher on how to. After watching this, I remember what we did last time, and your list of tools at the beginning was very helpful. Thank you.
You’re welcome! Glad this video could be of help. I appreciate the comment. As much as these break, it’s amazing we’re all not pros. I’ll have to watch my own video over to get a refresher for the next replacement. Cheers!
See my reply so you don't have to go through this again.
Thank you. After watching several other videos concerning replacing Tacoma door handles, this was by far the best.
Great to hear!
Perfect! Saved the Day. My buddy broke my handle today and offered to pay for it. After a few free beers from him, we did it ourselves thanks to your video. Thanks man, cheers!!
Hell yeah! Repairs always (usually lol) go better with beers. Glad this helped! 🍻
Pro tip! Don’t forget, the point you really need to lube to help keep from happening again is at the linkage above the door latch/locking mechanism (straight below the handle links inside door). That is the binding point on most of them and make that all buttery smooth and handle less likely to break.
Excellent point! Thanks for commenting 👍
This is it. My new handle wouldn't even work until I did this and then worked the inner handle back and forth 25 times. Now its smooth as granny's caboose! So not that smooth but much smoother.
@@philipkelly3697 🤣
Like fix it videos that get to the point, no excess bla bla bla.
Thank you !
Thanks so much! I did this last year. Now 1 year later I must do it again. Done buy cheap handles. I just paid for OEM and I should be installing today.
Hello. Yes definitely by the expensive OEM ones. The remanufactured ones or offbrand versions only last about a year as you’ve discovered. Best of luck for the future!
I watched a couple videos about this and by far this one is the clearest and most concise. Thanks for posting it!
Glad it was helpful! Thanks for the comment 👍
Thank you for taking the time to make this video! I replaced mine today, after watching your video! Thanks a lot. Now I need to know how to fix my door lock on the back door it keeps sliding down when I open the door. If you try to shut the door it hits the medal bar on the frame. I have to slide it up every time before I shut the door.
Hello! I’m glad this video helped! Thank you for taking the time to comment, I appreciate it 👍👍. As far as the rear door lock, I have not personally had any experience with them, but I’d start with removing the door panel and inspecting the connections. More than likely, a rod is bent or not secured well to a clip. Just have to open things up and look around. Sorry if this doesn’t help much. Best of luck!
Great video. The reason I’m responding is my 2002 Tacoma needs a new door handle. And with your video I think I can do it without much trouble. Thanks again. I think I’ll go to Toyota to get a new one because doorman parts like this don’t last as long.
Hello. Yes, absolutely get the factory handle from Toyota or spend the extra money on a more expensive aftermarket handle. In my experience, the cheap replacements only last a year or two.
If you’ve got some mechanical experience or just a little inclined, you can absolutely do this yourself. Just set aside some time and keep this video handy 👍
Thanks for the comment!
Got it changed pretty easy.
Although I did add jb weld on the stress points of the new one before I put it in.
And I jb welded the old one for a spair see how long it lasts.
I’m the only one that drives this truck so I take it easy when I open the door. No yanking on the handle it isn’t necessary to open it.
Great video! Had to destroy white clip w needle nose as Rod would not pull out of old handle. 1st time Changing out 20 year old handle. Door panel clips broke but auto parts stores have these. So happy now! Only negative is my 10mm socket is in door now. Looked all over and not at bottom. It's over on door opening side but can't reach and no luck w magnet. If new to this, just watch video over and over. I'm back in business. Thank you!
Glad this helped! Even though another 10mm had to be sacrificed. Haha! Thanks for the nice comment and nice job 👍
The fact that you were able to get a clear shot of connecting even ONE of the rods, alone, is worth a thumbs up, and an algorithm comment bump. ;)
Haha, I’ll take it! That was the most challenging part of the video to capture…
Great video. This is the second time I've had to use it. Both of my door handles on my two-door Tacoma broke off a year apart from one another
Par for the course with these... glad the video helped, twice! 👍
Thank you for the very detailed instructions. I don't work on vehicles much. Great job and Thank You. I got both of mine changed perfectly without paying garage prices...
Hello. Fantastic! Always great to hear a success story especially when it’s someone who has relatively low experience working on vehicles. Nice job and thanks for the comment 👍
Worked perfectly! I know this video saved me a lot of $. I usually have to have Toyota do things and I don’t have deep pockets. Thanks!!
You’re welcome! Glad to hear this video helped you 👍. I started the channel to save people repair bills and I’m glad it worked out for you.
good vid! More advice for you out there....your handle likely keeps breaking because that dang linkage inside the door to the handle rod keeps binding. You can see it going down from the handle and connecting to the inner hand rod. Spray the mess out of that linkage with your favorite lubricant. Then work the inside door handle rod (the one that is parallel to the ground when you have the door panel off) back and forth 20-30 times to really get that linkage working smoothly again. My new handle wouldn't even work until I did this and now it's like new. Also to gain accesss to the bolt closest to the door edge pop off that little rubber piece then you can stick your socket extension in straight. Don't know if that was mentioned in the vid. Happy wrenchin!
Great recommendations! Yeah, the lubricant is an absolute must on these. Thanks for calling that out 👍
The latch on my tailgate was not working so I took it apart and was able to use jb weld to fix the broken part. It was metal to plastic so the repair was easy. I think it should last a long time. The tailgate doesn’t get used as much and I’m gentle with it when I do open it.
BEST VIDEO FOR THIS JOB! I've watched four of these videos today. This one has the most detail regarding the two rods that hook to the lock mechanism and handle mechanism. thank you kind sir!
Wow, thanks!
Thank you for sharing. This is an excellent video, listing the tools right in the beginning, as well as links to useable resources. Absolute gem. Thanks again man, appreciate you!
You're very welcome! Thanks for leaving a comment. I appreciate it!
I watched a few dummies be fore I watched you.you did it like a pro.thanks your the man
Haha, thanks man! Glad the video helped!
Concise and to the point-did NOT waste my time showing me things I should already know. THX!
You bet!
This is an 8 minute video but it takes 3 hours to accomplish this task! It is also great if you have a lot of patience, and long, thin fingers. Got it done, good instructions.
Hello. Yes, the videos never tell the full story of the process. Just so you know the “fast” in Fas Fix is a reference to the expediency of the video helping the viewer get the job done properly and not necessarily in reference to the job itself.
Lol, yes long skinny fingers to help quite a bit. It’s weird, but I hear that comment a lot and maybe I should mention it because it’s very true. Thank you for the nice words too 👍👍👍
Thank you, for this excellent tutorial. I used it to replace a friend’s broken door handle.
Love to hear it! You are welcome! Thanks for the comment!
Thank you 🙏. Very concise directions with clear images. No extraneous BS 😃
You're welcome!
Recovering from new truck fever,decided if my rust free 2002 can make it to 400k might as well go for 5. Restoring it to new and this is job 1..thanks man., subscribed.
Wow, rust free at that mileage is crazy! The truck in this video was soon discovered to be unrepairable due to a rusted through frame. It’s now probably a scrap heap somewhere.
Considering prices right now, I’d hang onto that truck for as long as I could. To the moon! Or 500k 👍
Thanks so much, bro! I got a 1999 and the door handle on the driver's side broke off in my hand. I just ordered a new handle from Amazon and checking out your vid right now on how to do the replacement. I plan to do it this weekend. Later!
Hello. Bummer on the door handle, but they’re all on borrowed time. Best of luck with the repair! Thanks for the comment 👍. Feel free to let me know how it goes.
Video is spot on! Your video saved me from having to take it to the shop and spend money 💰 Thank you!!
You’re welcome! Glad it helped 👍
Thanks very much! I especially liked your clear video and comments about disconnecting and re-connecting the two clips to the two rods.
You’re welcome! Glad it helped and thanks for the comment 👍
I fixed it! The rods that snap in were bent some trying to get out earlier. I took handles out and bent rods some some now doors are smooth!
Good stuff! Glad it was something simple. Nice job!
Wish I could hit the like button 100 times more!!! You made this info easy enough for 2 girls to do. My daughter and I Thank You.
Ha! I wish that too! Glad this video helped you. It’s always good to hear success stories like yours. Congrats on a good job!
Thank you for this great video. My part came in today via Amazon. I changed it out in about 30 minutes. Taking it apart was way harder than putting it back together. I definitely would not have tried it myself, if it wasn't for this video ,thank you!
Much love from Central California 😎
30 minutes is making excellent time! Glad the video helped you and I sincerely appreciate the comment. Much love from East Nebraska 🥶
Thank you very much. Your demonstration is clear which help me a lot.
You are welcome! Thanks for commenting 👍👍👍
Thank you very much! I have a 97 Tacoma, which I still love. Very straightforward video which made the project easy to accomplish.
You are welcome!
Thanks brv. Didn't know this was toyota's issue until bot my handles broke on a date
Hello. Yup, it’s definitely a common occurrence. That was the third set of handles installed on that truck. Best of luck on the repair. I appreciate the comment 👍
It made the job a piece of cake. 15 minutes start to finish. Thank you!
You're welcome! I appreciate the comment.
Great video !
Very informative & super easy to follow. I’m amazed at how you were able to get all of the finesse interior work all on video. Awesome job !
Thank you! Glad this video helped! I appreciate your comment 👍
Thank you Mr fast fix for helping me change my exterior door handle.
Glad to help! Thanks for your comment 👍
Thank you, I just had to watch your video once and got right to work. You definitely saved me time and money!
You are welcome!
Just changed mine following this video. Thanks!
You're welcome!
Better than the other video I found... Clearly explained and with good videography and tips along the way. Thanks! (wish me luck in a few days... Waiting on the replacement).
Best of luck! Glad the video did a better job than the other. 👍
Thank you very much for the very informative video… I took on this project this afternoon and replaced my driver store outside handle… And thanks to you it went very smoothly!
You are very welcome! I’m glad the video helped you and nice work on the fix. Thanks for the comment 👍
Thanks for this video. It saves me some time. Borrowed my father’s truck and it broke (20year old plastic) and he yelled at me anyway, so I am fixing it. Got a genuine handle on eBay, hopefully lasts another 20.LOL
Ha! Best of luck. The last one I put in has stood the test of time….so far
@@FastFixTH-cam
I installed it today. I had a bit of a problem getting the thicker rod off the door handle. A heavy duty hook tool made quick work of it.
I used wd40 as you suggested to clean the lock and then used that lock ease stuff with the graphite because the WD will evaporate after. While. The WD also made quick work of removing grease I got on the white paint on the truck.
Thanks again, your advice helped me do the job much quicker-at work on my lunch hour! I still wonder if it just cracked or if it was vandalism… 500 plus sold on eBay, so probably just plastic fatigue after 20 years.
Awesome, glad the repair went relatively smooth. Yep, it’s fatigue. They break all the time. It’s a common problem. Thanks for all the comments! Much appreciated 👍
You did a great job explaining. I was able to do it almost by myself. My door won't unlock with the key but I don't even care at least I have a door handle 😅 thank you!
You’re welcome! I appreciate the comment 👍
Thanks for the video. Just did mine a little while ago on both doors '01 tacoma prerunner. The only thing that I struggle a bit was the re-installation of the plastic latch back to the metal rod that connects to the door latch from the inside of the passenger door. The metal rod was kind of too short to re-insert to the back of the release handle and you've got just a little room to slide back the plastic lock that holds the rod. It's a bit challenging but definitely consider it a "Fast Fix!" Thanks again for your great video.
You are welcome! And yes, I agree. There are always elements of every fix that are tricky / challenging. Thanks for the comment 👍
Thank you for posting this. Another 2001 Tacoma fix I can do myself!
Any time!
The aftermarket handles are trash this is my 3rd set I've gone through in only a few years. I watch these videos every time I have to replace them even though I've done it before the videos are great!
Glad to hear it helped even though your a hardened pro! Agree on the build quality. I sprung for the more expensive handles this time and they’ve now lasted a few years 👍
Thanks for this video! The instructions are clear and easy to follow.
Glad it was helpful!
Beautiful camera work and explained thanks for taking the time 👏🏻👏🏻
Hello. You are very welcome! I’m glad this video was useful and I appreciate your comment. Have a great day!👍👍👍
just got handles for my 03 thanks for a pretty cut and dry video
You’re welcome
Did it this morning. Great video, great instruction! Everything went like you said. You might want to add your list of tools/parts. The connectors. I broke 4.
Hello. Oh shoot….well I suppose that makes sense considering the door handle fails so easily. Where did you find replacement clips?
Just replaced mine for the 2nd time. The cheap 1 lasted 8 months but hopefully the Dorman will last a bit longer. Thanks for the great tips and tool links.
Yep, sounds about right. The cheap ones don’t last long at all. This is the 3rd door handle on the truck. Hope the nicer ones lasts longer. So far so good!
One and done. Do the right side tomorrow.
Thanks for keeping simple
You bet! I appreciate the comment 👍
Quick and easy fix. Thanks for sharing this video.
You bet!
Wd 40 is not a lubricant fyi.
Thanks for the vid, helped me out
Yes, correct. And you’re welcome!
Thats my project this weekend. Thanks for the walk thru, hopefully all I have to worry about is frozen fingers.
Haha, I hope so too. No problem with the vid and glad it helped. Good luck on the project 👍
Thanks, excellent video! You made it a breeze to replace my door handles. Appreciate it!
You're welcome!
Great step by step tutorial. Used each step to success. Thanks for your help!
You’re welcome! I appreciate the comment 👍
Thanks for the very informative video. Great detailed instructions.
You’re welcome! Thanks for leaving a comment, I appreciate it 👍👍👍
Great video. Thanks. The only instruction missing was that the inside door handle needs to slide towards the front of the door. I thought it must just pop out, but there are tabs that must disengage by sliding the inside handle forward a bit.
Excellent tip! Thanks for the comment. Much appreciated!
This was a fantastic video with a great step by step instructions!
Glad it was helpful!
Best video I have seen on this repair. Thank You.
You’re welcome!
Excellent video 📹 👏 you know exactly what your doing and are able to teach that perfectly bravo 👏 cheers 🍻
Thank you! Cheers!
Very straightforward. Thank you!
You bet!
The best video I found on TH-cam for this fix! Thanks for the easy to follow video and good instructions! Just subscribed! 👍
That’s great! Thanks for the nice comment 👍
Excellent teaching video. Thank you!
You bet!
Thanks, after watching your video, replacing the handle in my Tacoma 2004 was much more easier
Glad to hear that! They break often enough so I’m sure you’ll get more practice in a few years. Thanks for the comment!
Awesome! It worked exactly like you said. Thanks
Great! You are welcome!
Thanks for taking the time to do this!
You bet!
Great vid! I recommend a OEM toyota door handle as well, so you likely won't have to do it again in the future.
Hello. Yes, 100% use the OEM part. Although this part was not OEM, it was of better quality and has so far stood the test of time. Thanks for the tip!
This is an excellent video. Good camera work and easily understood instructions.
Thanks for the excellent comment! Hope the repair goes well for you.
Dud thank you so much. This video is made perfect. You made it look very easy to do . I’m changing mine tomorrow. Thanks again
Hello! Best of luck! I hope I didn’t make it look too easy, but in my opinion, it is something most can do. I have heard people with larger hands have more issues, but other than that, pretty straight forward. Thanks for the comment!
Excellent video and explanation! Going to replace mine this weekend 😎
Great! Best of luck and thanks for the comment 👍
Thanks bro! Very easy to follow instructions and straight to the point! New subscriber here.
That you sir!
Good instructions. Only improvement: would definitely recommend having 9mm Door Trim Panel retainers on hand. These hold the interior door panel to the door and several will break when you pop the interior door panel off.
Yes, I completely agree. Thanks for the input!
Your vid was exactly what I needed. "You the MAN!" Thank you very much...
You’re welcome!
excellent video.. one of the best I've ever seen
Thank you!
Very good instructions thank you
You are welcome!
Kickass video. Great closeups and detailed explanations. Thanks and subscibed!
You’re welcome!
Great video love the step.by step
Glad you liked it! Thanks for commenting 👍
Good video my dude! about to do both sides on my 2003
Good luck! Glad the video helped and thanks for the comment!
Great video bud! Filmed and explained everything so well! Thank ya dude
You’re welcome!
Great video ,, saved me time and money,, thanks guy
Glad to hear that! I appreciate the comment 👍
Dude youre a life saver. Thanks for the video.
You bet!
Excellent video. Easy to follow. Done dit it. Thanks!
You bet! Comment appreciated 👍
This will be my third time replacing the handle. Dealer wants like $90. Went cheap and bought off eBay. They tend to last 2-3 years. At least the last one had a warranty. Should be an expert by now but always need to refer to a how to guide. You make it look so easy.
You are welcome! This is the 3rd handle on this truck. The last two were cheap. This one was $50ish I believe. We’ll see if it lasts! Thanks for the comment 👍
lube the inner door linkage and they will last three times as long. Made a huge dif on mine!
Thanks, it was awesome and learned a lot!!
Glad it was helpful! Thanks for taking the time the time to comment and have a fantastic day!
Thanks for this. You saved me some money
Glad you hear it! You are welcome!
I just did it step-by-step and it worked great. I had to do this on an old Chevy one time and learned the hard way that you have to roll the window up in order to access all the stuff inside the panel. Fortunately I remembered that this time. Thanks again that was a lot of help 🙂
Done this a few times already but rewatching helps alot 👍. Thanks bro
You are welcome!
Very good video very detailed and helpful 👍🏼👏🏼
Hello. Thank you! Glad the video helped 👍
Nice to see how ! Thanks !
You bet!
Thanks my truck is happy
Woohoo! 👍👍👍
Awesome. Thanks for posting this.
You bet! I appreciate the comment 👍
Thanks for posting.
You bet!
Nice work! Thanks very much. Come to Portland Or. and I'll buy you a beer.
Hello! Heck ya, I’d take a beer anytime! Haha, thanks for commenting and great work!
outstanding! you sir saved me plenty of bucks
Great! Glad to hear that. Thanks for the comment 👍
Thanks buddy
That is a big help!
You bet!