How to recalibrate DCC in a Volkwagen/Audi with OBDEleven!
ฝัง
- เผยแพร่เมื่อ 2 เม.ย. 2021
- Hey guys I'm finally bringing the video on how to recalibrate DCC(Dynamic Chassis Control) using OBDEleven. It's honestly pretty easy to do, I didn't have any issue on doing it. If you have any questions please leave them down below! ALSO if you're new here consider hitting that subscribe button!
- ยานยนต์และพาหนะ
Great info!
Worked perfect for my 17r. Thanks again. I was about to go back to stock lol
Glad to hear!
Thanks man!
Ur one of the few people doing GLI videos :( I bought my exhaust because of you. Acknowledge this if ur still living and gonna make some videos!
I am. Just been going through some things I’ll will be making a video soon. I promise
Awesome!!! I understand that. I just know some smaller YTs feel like they don’t get any views and they quit. And I was worried you quitting on us. Remember you can’t quit :) but if you need to take some time away to handle stuff of course take as much as you need!
Is this adjustment noticeable? I'm thinking if I want to lower my gti but this procedure is keeping me from doing so
Thanks Mr Boosted I've learned a lot with you, do you know if it request to do a calibration when the front shock bumper has to be replace?
I’m not sure, I would think so tho
My 2018 S3 has mag ride but when I plug in my OBDEleven, I do not have the "adapting with deflected wheels" option on my menu.... anyone got that missing on their menu?
Should I do this right after the new springs are installed and settled or should I wait to get the car aligned first ? Thank you
I have the same question
Hello, you think this will work for a golf 7 gti lowered with b16 damptronic coilovers with dcc because the ride is way too hard and stiff, and i feel like the dcc modes are not working.
I would think so if anything the steps are very similar maybe a few different options to go in
Did this actually make any difference with ride quality? Also, since installing my springs, I occasionally get a “fault: suspension” message on my gauge cluster screen. Did you ever experience that, and if so, did this help with that?
It did help the ride, it doesn’t feel like your bottoming out on every bump. I did not have that fault ever pop up but re calibrating it could fix that issue
@hu5kyy Did you get a fix to the fault suspension issue? I am having same troubles:(
I'm getting this fault I've changed out for new still same issue, have been told you can adjust the sensor but I don't have a how 2 🤣 any help welcomed
My Tiguan 2 has DCC function, but i found recently the default setting of suspension was steel suspension, there is three option for selection, Steel , Air suspension and DCC. I use OBDeleven, A5 control unit, long coding, bit 5, then chose DCC. I really upset why VW does not check out this before sell to end user.
That's the thing, they don't want user's "coding/modifying" anything. I feel sometimes they make it a headache on purpose to discourage users from trying anything.
does it make sense to do it with the original springs after high mileage? A bit like you do with the DSG gearbox
It probably wouldn’t hurt
Great video! Can you do it to disable dcc for in case of replacing to coilover? Thanks
Hey. I have a 2014 Audi S6. I am using OBDeleven. I changed my right front air strut. I am trying to calibrate (adaptation) and I am getting the message " (24) Procedure cannot be performed, incorrect sequence". Any idea what I might be doing wrong?
Hi, were you able to figure this out?
@@Jmz7vHD I had to take it to dealer. I paid an hour of labor for them to calibrate.
Would this work for an Audi S3 with magride and lowering springs? I've been told I either need to get Audi to recalibrate it or I can buy that APR suspension control module thing which sounds awesome but is expensive.
Hey, did you try it? I just replaced my struts (one of them went bad) for a TTS and got the suspension warning, not sure if this would help me fix it.
@@Jmz7vHD Never tried it in the end. I've had to replace the turbo and more recently the transfer case and water pump. I guess all the extra power and torque combined with the ability to launch from 4200rpm shredded everything inside the transfer case.
has anyone done this on the S3, which is called magride instead of DCC?
Hi Do you know how to adjust your level sensors to allow the obd11 to reset your adaption? My front right is causing issues, changed for new but it's not playing the game 🤣
Cheers
Darren
I’ll be honest I’m not sure I learned out to do the dcc from a forum
@@mr.boosted9983 ok thanks for the reply 😁
Unfortunately, I couldn't do this on my car as the security/login code didn't work. Has anyone else experienced this?
Why cant I find the DCC module in my 2019 GTI autobahn with DCC?
This is happening to my buddy, what did you end up doing?
Do u need the pro subscription to do it or can u use credits
I believe you need the pro, that’s what I have
I wondering if this would work on my 8R?
It might be a little different but should be similar
@@mr.boosted9983 thanks!
I follow your instruction, but the login code is invalid, I try both login code that OBDeleven shown, how can i do?
Use whatever login code it shows and that one should work
Ever find a fix? Codes aren't working for me too.
Hey, I’m trying to do this but keeps failing in the Basic Setting -> Adapting with deflected wheels . It says CANCELLED DUE TO DETECTED
MALFUNCTION… still getting the suspension fault and it’s really bouncing. Please help!!!
Did you find the problem?
I’m getting the same issue
Did u find this problem ? Thanks...
Yooooo where are ur videos D:
Is Smirnoff Ice adding any weight to the left rear. You might want to remove it and recheck your settings.😂😂😂
They slap tbh. Red White and Berry
Isn't it funny that the right rear on everyone's including mine stayed on 33% wonder why that is...
OBDEleven Pro?
Yes
we need to delete dcc with no error 😊
Should have went through it abit slower. U sped through the screenrecording. Had to rewatch it like 5 times to check where u clicked.