Might I suggest you make a document of your stock settings and then also all of the OBDELEVEN changes you make during your vid. Basically a 'before and after'. Then list the link for the doc. Would increase the value of your vids tremendously.
I tried implementing this today following your steps - almost still works this way. Only difference was that I had to switch step 2&3. So that would be changing the ACC to Audi and only then was I able to change the Engine Byte 00 from Hex 09 to Hex 02. Otherwise, it just wouldn’t let me overwrite it. These changes in combination with adjusting the Haldex pretty much gave me a new car. I’m very pleased with the results! Thank you!
the makers of OBD11 should be paying you. Just purchased an OBD11 Pro because of you on line and champing at the bit to do what you have just done with my 200 km old R 7.5. Great video and thanks. Cheers from Australia
my 2018 golf R feels a bit more alive, has more initial response and power in the low and mid range. this really works for those who want to remain stock
Thanks a lot for this very helpful tip. If i may add something: i own a european Manual gearbox Golf 7.5 R ( 01/2018 ) and even if the byte 00 coding was not the same as yours ( 09 19 00 12 24 46 05 0B 30 04 ), i used the IOS OBD11 Longcoding function to change from HEX 09 to HEX 02 value the same way you described it ( Bit 0-Bit 3 to Bit 1 ) and it worked perfectly, no need to change the VW to Audi cruise control coding, BUT: It created two errors ( steering column and ACC ) after i checked... All i had to do was to quick erase these errors and it never came back. A wonder ! I have then driven the car in an overcrowded city, could activate the cruise control when Front Assist and ACC were flawless ! Thanks a lot again, you made me spare 15.000 $ not to buy an Audi S3 :-) Best regards from France
Thanks for this - worked perfectly in my 2017 Passat R-Line*, with the minor variation that the ACC changes weren't actually necessary or seemingly even possible, and continued to work without any fault. I did already have the "Last distance selected" setting though so I suspect the component or coding may have already been more in line with what Audi uses. Didn't give me any errors other than the same momentary "Brake booster limited" one or whatever it was, which didn't reoccur after the initial setting. Results in regular mode are nice. Definitely a bit less rough off the line and doesn't punch you in the face as soon as the boost comes on, a bit more graceful and whooshy while still retaining the same overall power. Worth it by itself, and I would have been happy with that alone. In Sport mode, wow - different car entirely. It automatically disables stop-start while you're using it rather than making you use the button, holds the revs higher while you're stopped for noticeably less lag when you set off and takes you off the line way faster - launch control or not. It doesn't even sound the same, it has sporty little growls on the downshifts that it didn't have before and actually seems to manage some legitimate growls when you rev it stationary. Honestly, I suspect the VW profile on this particular car was nerfed HARD in order to not talk people out of an Audi. *B8 - i.e. more like an Arteon than the weird NMS Passat the US gets
I've got a 2018 Passat 206TSI R-Line...and just received my OBDeleven... nervous to try this mod, but if it's as good as it sounds it'll be worth the cost alone 😀
I activated the speed sign recognition in my 2020 r and I had the speeding warning menu straight away you mentioned and the other option for last remembered distance was already active. I do have a newer 9 inch head unit without any knobs all touch. I want to do this but bit worried if I can't go back lol 😂
hey man.. just done these steps to my brother in laws mk7.5 gti and everything worked fine, he also got a resonator delete (£70) so it sounds a lot better and got a free little bit of performance and driveability from following your steps...excellent. also turned up the xds interaction setting to strong and it gives excellent improvement on uk roads e.g wet roundabouts etc, good bit of fun from a fwd 4cyl hatch
@@rat4955 local custom exhaust shop in east Kilbride called Simon's custom exhausts. Was £70 cut out for straight pipe. But seen the sections on eBay for £80 if you want to keep your original piece and swap it yourself
On my '17 Alltrack I set throttle response to Linear and Engine code to Audi. It certainly woke the engine response up more, a noticeable change. Have the Neuspeed Power Module too, so combo's for a poor mans tune. I did not have any issues or errors with my ACC keeping it with Brand-Logic VW. Setting it to Audi DID deactivate it and give errors however. Odd.
Mk7.5 R I just set me engine response to Audi, quite noticable, in race mode with launch control it's even more noticeable. Front wheels break traction from the DSG 1-2 SHIFT. My throttle response says not available, but the engine setting was changeable
I have a Tiguan R 2023, just tried to switch to "direct", and was very disappointed. Was linear and boring, and I think quite less responsive without push. Reverted to "incremental", will not try AUDI coding as probably does not work for Tiguan R. But many thanks for your advises which for sure work for some other models
Great video-thanks I coded my 2018 Volkswagen Tiguan 2.0 liter accordingly - an excellent result in addition to the Stage 1 that was already on the vehicle
Hi this is great video, i have a 2018 gulf alltrac and i would love to get better throtle responce and i would like to possibly have the DSG lock up sooner then it does. Do you think i can make the chages you made for my alltrac?
@ Netcruzer : can you give more details how do you make settings from 04:07 in the video - for audi brand logic. I have VCDS but can not find this option.
Tried these tweaks myself. Mind you I am JB4 tuned but I’ll save you some time and say that the changes are very minor. It felt like boost came on with less throttle when I changed the throttle remapping to linear but I wouldn’t say that the car felt completely different or anything. As for changing the engine code to “Audi” logic I noticed no difference. Again, I am JB4 tuned so what I feel may be completely different from a stock car or a flash tune.
Hi, I just want to ask something, I’ve got a golf r 7.5 and OBD Eleven, can the same results be achieved doing the following: 1. Under Apps change “Increased Engine Response” to “Audi” 2. Under Apps change “Throttle pedal response” to “Responsive” 3. Under “Control Units” then “Adaptive Cruise Control” then “Long coding” then change “Brand_logic” to “Audi” to eliminate any error codes/any problems with active cruise control Thanks!
I have a Golf 7 with a 999 cm3 TSI engine, without ACC. If I change the Byte 00 with Bit 1 selected = Hex 02, than I donát need to add the rest of modifications?
Thanks for making these OBDEleven videos! I just picked one up myself and it's in the mail. Just wondering if your EQT Stage 1 ECU+DSG tune will affect the changes made? Or vice versa?
Very good video. Learned three things. A) it is fun playing around, coding your car B) Audi has better coding C) Maybe consider buying an S3 instead of a Golf R, maybe...
It generally works, but Audi setting eliminates some ACC functtion, predective speed limit display and distance warning in front assist. I don’t feel any throttle improvement when setting the engine to Audi. Setting module 44 to linear does the trick and increase the consumption as well. When I change the engine to Audi the consumption decreased to normal. No throttle improvement. Vw tig allspace 2.0 tfsi 22.
At 4.55 in you video you talk about changing the ACC (Adaptive Cruise Control - Control Unit/Module 13) to Audi ... how do you do this I can not find any setting in that module to be able to do this? I have traffic sign recognition working in my car with sign speeds displayed in my dash but no overspeed warning or being able to set warning on multimedia screen (have a 2020 MK7.5 Golf R fitted with Discovery Pro Navigation/Audio system - Australia model car - Final Edition). I have however found two settings in Long Coding which are currently deactivated ... 'Speed_Limit_assistent' and ' Traffic_Sign_Detection'. Love your videos very well done and informative ... not like some who do not talk at all and do things so quick forever going backwards etc. to see what was done, and even then some things can't see as fingers in way. Anyhow new to this just bought this car new in August 2020 and my OBD11 about 3 weeks ago and still learning.
Changing the throttle responsiveness was one of the first OBD eleven tweaks I did. Last night, I changed the engine responsiveness to Audi thru the app section which was 10 credits. Is this the same thing you did, but you long coded it? I turned it off without trying it out because I read that ACC won’t work and it will throw errors. I have a 2018 Golf R manual Cobb protuned. So I wonder if I will even feel a difference?
That’s why I didn’t use the app. Long coding manually plus cruise logic change makes it work with no errors. Yes you’ll feel it. That’s why I made the video.
Netcruzer RC TECH CARS oh ok. So In my case. I just have to long code to change to Audi increases responsiveness and long code to change the ACC to Audi too, right? I don’t have a DSG and I already turned on increased throttle response thru using credits. Obviously, I know you can feel a difference. But I’m wondering if I WILL feel a difference since I’m far from stock. I read some saying they didn’t feel a difference, but I still wanna try it out.
Update: all I had to do for me was change the ACC to Audi and Engine responsiveness to Audi. Everything works fine. I can feel a slight difference when I accelerate. But I don’t think it’s as big as a difference since I’m not stock. Works though 👍🏼. Thanks
I own a Tiguan, assuming close to same settings, do you think this would put the Tiguan to the Audi Q3 performance in the same engine base and awd setup?
hmm ive done a lot of testing on this too.. most people think driver profile switchover is just that.. effects when you change driving profiles.. but if you found it changes throttle.. thats interesting..
Subtle throttle change in they steering adaption which is a very odd place to put it but it might be a placebo. The Audi hex engine coding and cruise to Audi brand-logic has a much more noticeable effect.
you did help me remember my driving profile switchover tho, and i checked it. i had it gradual instead of direct! although i know i had it direct at one point, i must have put it back for some reason. anyway, i now have it direct again just to be sure. im still hunting for the real way to disable start / stop without the warning lights.. and i dont want that DIY auto-set module either..
I don’t have ACC on my 2019 but still traction control won’t work. Went to change the brand to Audi but gave me unavailable error. I’m guessing because I don’t have adaptive please let me know if you ran into this before.
Thank you for doing your homework and sharing the results. I had done this previously but only used step 1 (No audi code change). I felt a difference but didn't like it. Might try again. By the way, have you played with the increased traction (haldex) mod and disable xds? first change seems to increase haldex response and makes it seem more awd. Steering feels heavier too but not sure it's a placebo. Latter change disables rear braking when turning (I did this to save rear pad life). Would like your opinion on this if you get it done. 👍
@@netcruzer I've had it on for about 900 miles or so. I can't confirm if it's drastic enough. My mpgs range from 18-24mpgs, it's all dependent on how spirited my drives are. You may like it, there's an improved feel entering longer sweeping corners off/part throttle (I dont drive aggressively on the roads to avoid attention). Has a reduced fwd feel to it. Conversely, the settings can be adjusted so haldex is weaker and delayed and in combination of disabling rear brake (drag on each wheel) mid corner to improve MPGs.
Because that’s what you need to do to get a final Hex code of 02 for an Audi 2.0 TSI engine. It’s shown in the upper right I think. Hex value is what you are trying to change.
hi, thanks for the quick reply. I read that it was only Bit 0 which is changing the mode. I already noticed a change by only swtching it. So i get 0A now instead of 0B. I got a Cupra Ateca, but I guess its works the same.
I think it works with my Leon Cupra MJ18, because i feel it ( I will test it for a while! ). But my default hex was 0B ( Byte 0 - Bit 0,1,3 ). ACC no problems, and no errors! Thanks :)
I have a 2020Tiguan Comfortline without ACC, only have the CC. Do I still need to make the Brand logic change to Audi, or can I skip that? Also, you have a mod to disable engine start/stop feature? The voltage method (changing to 12V) didn't work.
Hi, I loved your videos I’m also a Canadian and I bought a 2018 golf R DSG as well a few weeks ago but I don’t have the Adaptive Cruise Control and I don’t find anywhere the info to Code the “normal cruise control” to Audi I’ve done the pedal and engine to Audi no problems except now the normal cruise not working and error with “!” In the cluster with cruise sign… Anybody solved that issue???
can u help me i dnt know what i did with coding in obd eleven long coding my a/c stop working adaptive cruise stop working lane assist also blind spot too all not working please help me to set it back or reset
It's subtle, but I definitlely could notice it on my turbocharged VW. Even more with a Stage1 tune.. so much initial throttle now that it's hard to smoothly accelerate I might revert back to stock throttle logic.
Setting the Audi engine code (byte 0 --> set to 02) made my car throw a static fault code in the brake unit (P164700). Reverted back, cleared/re-scanned and fault is gone. CAD 2018 Golf R without DAP/ACC here. Does your car show any faults now after a re-scan?
@@LayMamaHoMah I did skip the 3rd part as non-DAP cars wont have the ACC control unit. I suspect the brand logic has to be changed somewhere else for normal cruise, just not sure where it is located. Also I don't think the "driver profile switchover" setting has anything to do with throttle response, more likely linked to drive mode changeovers.
1. Go to control unit ( engine ) 2. change back to VW (Bit0) 3. save and clear all errors CC should work again 👈 I know because tried this mod on a 1.6 TDI Engine responsiveness won’t work when you only have CC. Pedal throttle can work.
Interesting i did this today but my ACC and cruise would only work if i left the brand logic as "Vw". As soon as i tried changing it on the last step my cruise control error popped up. Anyone else have this issue?
Do you know if that starting on vibration reduction actually increases the clamping force of the clutch packs And do you know if your 2018 model has the DQ381DSG version
Little late but I tried it and everything went well, untill I wanted to do the “audi brand logic” thing. I don’t see the “brand-logic“ option anywhere. Can someone pls help me? Because I do have the acc error right now
Great tips! I have a question for you, where did you find the information for the Audi Engine coding (Byte 00 with Bit 1 selected = Hex 02)? I know you have a 2018 mk7.5 Golf R, and I am trying to code a 2019 GTI. The default engine code of my car is the same as yours (Byte 00 with Bit 0 and Bit 3 selected = Hex 09) I just want to make sure I am looking in the correct place. I tried your coding, and I did receive a Cruise Control error that I couldn't resolve, so I had to put the engine code back to default. Thanks in advance!
Any help would be appreciated.. I tried this on my 2020 GlI basically a GTI an I can’t figure it out. Now I don’t remember my factory setting.... do you know a way to get it back ??
Help me I have a mk7 2016 I did the first two parts and I am not able to have cruise control but I know it is cause I don’t have acc do you know how to fix it?
Hi, Folks. I was trying this stuff on my 2016 MK VII Golf R WITHOUT ACC. I couldn't get the regular cruise control working with the Engine coded for Audi. I was able to get the Driving Profile Switchover changed from "Incremental, controlled over time" to "Direct: controlled over threshold value" and also got the Engine Vibration Reduction "Deactivated". But when I coded the Engine for Audi, the cruise control went wonky. Anyone have any thoughts on a non-ACC-equipped model? Thanks!
2018 Golf R MK7.5 - I tried this and I was able to code 44-Steering Assist (Direct: Torque controlled over threshold value), and 01-Engine (switch to Audi) but I was not able to code ACC as mine is called 13-Auto Dist. Reg and it did not have brand_logic in long coding or adaptations. Likewise for 03-Brake I did not find Starting Vibration Reduction. That being said I got no errors and cruise control worked, not sure about the ACC as I didn't want to follow the one car on the highway as it would be weird. But no codes. Overall I'm loving it. So much nicer pedal to torque feel. I'll test launches later. I did get the dynamic road signs warning options in the Nav car settings and I am able to adjust my cruise control in increments of 1 mph. I'll look for rough road optimization.
Do you have the driver assist package? The cruise control module should have brand_logic in long coding menu. I have sale year car but mine is Canadian.
@@netcruzer Okay I tested the ACC after the mod. For my module, I did no coding change in the ACC at all and it works! 2018 MK7.5 NAR stage 2 Uni ecu/tcu tune with DAP. I'm loving these mods, the throttle feel is sooo much better TY!
@@hanshobbies Thanks for this comment bro.. I have been searching here, trying to find brand_logic and couldn't find it. At least I know yours worked without that.
Ok not sure why. Another person with a 19R has send me messages and it worked for his car. Stock engine code for Byte00 was hex09 for mine and his. We changed to Hex02 for Audi, along with the other changes in this video.
Netcruzer RC TECH CARS is there a way to code for cruise if you don’t have ACC? Or you are kinda SOL with the new linear throttle response ans engine code bit 00?
No this is different, it’s not an ECU flash. My old GTI was highly customized using OBDeleven And canbus longcoding. In early 2019 VW scanned it my MK7 GTI and accepted it for Certified Pre-Owned resale!
Might I suggest you make a document of your stock settings and then also all of the OBDELEVEN changes you make during your vid. Basically a 'before and after'. Then list the link for the doc. Would increase the value of your vids tremendously.
I tried implementing this today following your steps - almost still works this way.
Only difference was that I had to switch step 2&3. So that would be changing the ACC to Audi and only then was I able to change the Engine Byte 00 from Hex 09 to Hex 02. Otherwise, it just wouldn’t let me overwrite it.
These changes in combination with adjusting the Haldex pretty much gave me a new car. I’m very pleased with the results! Thank you!
the makers of OBD11 should be paying you. Just purchased an OBD11 Pro because of you on line and champing at the bit to do what you have just done with my 200 km old R 7.5. Great video and thanks. Cheers from Australia
Thanks. They don’t pay me, as in these videos are not sponsored. BUT they have sent me the devices and credits to show what you can do with it. 👍
Just got my golf and purchased one just then too 😎
does your golf r still run good with lots of km? also is this app free
@netcruzer do you know the long coding of the acc to brand logic vw to Audi? I have a similar device to obdeleven but mine is car scanner
@netcruzer do you know the long coding of the acc to brand logic vw to Audi? I have a similar device to obdeleven but mine is car scanner
my 2018 golf R feels a bit more alive, has more initial response and power in the low and mid range. this really works for those who want to remain stock
Thanks a lot for this very helpful tip.
If i may add something: i own a european Manual gearbox Golf 7.5 R ( 01/2018 ) and even if the byte 00 coding
was not the same as yours ( 09 19 00 12 24 46 05 0B 30 04 ), i used the IOS OBD11 Longcoding function to change
from HEX 09 to HEX 02 value the same way you described it ( Bit 0-Bit 3 to Bit 1 ) and it worked perfectly, no need
to change the VW to Audi cruise control coding, BUT:
It created two errors ( steering column and ACC ) after i checked... All i had to do was to quick erase these errors
and it never came back. A wonder !
I have then driven the car in an overcrowded city, could activate the cruise control when Front Assist and ACC
were flawless !
Thanks a lot again, you made me spare 15.000 $ not to buy an Audi S3 :-)
Best regards from France
So far the best OBDeleven instructor ever!
Thanks for this - worked perfectly in my 2017 Passat R-Line*, with the minor variation that the ACC changes weren't actually necessary or seemingly even possible, and continued to work without any fault. I did already have the "Last distance selected" setting though so I suspect the component or coding may have already been more in line with what Audi uses.
Didn't give me any errors other than the same momentary "Brake booster limited" one or whatever it was, which didn't reoccur after the initial setting.
Results in regular mode are nice. Definitely a bit less rough off the line and doesn't punch you in the face as soon as the boost comes on, a bit more graceful and whooshy while still retaining the same overall power. Worth it by itself, and I would have been happy with that alone.
In Sport mode, wow - different car entirely. It automatically disables stop-start while you're using it rather than making you use the button, holds the revs higher while you're stopped for noticeably less lag when you set off and takes you off the line way faster - launch control or not. It doesn't even sound the same, it has sporty little growls on the downshifts that it didn't have before and actually seems to manage some legitimate growls when you rev it stationary.
Honestly, I suspect the VW profile on this particular car was nerfed HARD in order to not talk people out of an Audi.
*B8 - i.e. more like an Arteon than the weird NMS Passat the US gets
I've got a 2018 Passat 206TSI R-Line...and just received my OBDeleven... nervous to try this mod, but if it's as good as it sounds it'll be worth the cost alone 😀
Love that you're in Canada cos kms etc is all relevant.
I activated the speed sign recognition in my 2020 r and I had the speeding warning menu straight away you mentioned and the other option for last remembered distance was already active. I do have a newer 9 inch head unit without any knobs all touch. I want to do this but bit worried if I can't go back lol 😂
hey man.. just done these steps to my brother in laws mk7.5 gti and everything worked fine, he also got a resonator delete (£70) so it sounds a lot better and got a free little bit of performance and driveability from following your steps...excellent. also turned up the xds interaction setting to strong and it gives excellent improvement on uk roads e.g wet roundabouts etc, good bit of fun from a fwd 4cyl hatch
hey where did you order yours from? the res delete
@@rat4955 local custom exhaust shop in east Kilbride called Simon's custom exhausts. Was £70 cut out for straight pipe. But seen the sections on eBay for £80 if you want to keep your original piece and swap it yourself
On my '17 Alltrack I set throttle response to Linear and Engine code to Audi. It certainly woke the engine response up more, a noticeable change. Have the Neuspeed Power Module too, so combo's for a poor mans tune.
I did not have any issues or errors with my ACC keeping it with Brand-Logic VW. Setting it to Audi DID deactivate it and give errors however. Odd.
Mk7.5 R I just set me engine response to Audi, quite noticable, in race mode with launch control it's even more noticeable. Front wheels break traction from the DSG 1-2 SHIFT. My throttle response says not available, but the engine setting was changeable
Thanks for this information. I have a vw Tiguan 2021. How can I do this changes? Which app do you use?
it's working perfect on my tiguan 2.0tsi 2018 except step 4 I had both lines in brake module and changedyour first option in both deactiveded
I have a Tiguan R 2023, just tried to switch to "direct", and was very disappointed. Was linear and boring, and I think quite less responsive without push. Reverted to "incremental", will not try AUDI coding as probably does not work for Tiguan R.
But many thanks for your advises which for sure work for some other models
Great video-thanks
I coded my 2018 Volkswagen Tiguan 2.0 liter accordingly - an excellent result in addition to the Stage 1 that was already on the vehicle
does it work with tiguan tdi 190 ??
Great coding... It work perfectly
I have a t roc 1.5 150 TSI and I noticed great improvement.
No errors
do you have acc
@@alidogangullu7401 yes
@@Christian-LG any problem?
Hi this is great video, i have a 2018 gulf alltrac and i would love to get better throtle responce and i would like to possibly have the DSG lock up sooner then it does. Do you think i can make the chages you made for my alltrac?
Just tried this, works perfectly! Thanks for the vid 🙏
@
Netcruzer : can you give more details how do you make settings from 04:07 in the video - for audi brand logic. I have VCDS but can not find this option.
Tried these tweaks myself. Mind you I am JB4 tuned but I’ll save you some time and say that the changes are very minor. It felt like boost came on with less throttle when I changed the throttle remapping to linear but I wouldn’t say that the car felt completely different or anything. As for changing the engine code to “Audi” logic I noticed no difference. Again, I am JB4 tuned so what I feel may be completely different from a stock car or a flash tune.
This saved md a headache
Thank you, sir
Hi, I just want to ask something, I’ve got a golf r 7.5 and OBD Eleven, can the same results be achieved doing the following:
1. Under Apps change “Increased Engine Response” to “Audi”
2. Under Apps change “Throttle pedal response” to “Responsive”
3. Under “Control Units” then “Adaptive Cruise Control” then “Long coding” then change “Brand_logic” to “Audi” to eliminate any error codes/any problems with active cruise control
Thanks!
id also like to know!!
Did these changes have any effect on applying your Stage 1 mapping.
Step 3 actually disabled my ACC entirely (19' GTI). I had to change it back to 'VW' and no problem.
Hello you have idea if this works on CC Sport plus? Thank you
I have a 2.0 VW TDI and wondered if there was a way I could code the engine segment to a 2.0 TDI from an Audi as you have with the TSFI
Hello where do i find it brand-logic?
I have a Golf 7 with a 999 cm3 TSI engine, without ACC. If I change the Byte 00 with Bit 1 selected = Hex 02, than I donát need to add the rest of modifications?
Will doing this erase my current tune?
No not at all. It's just throttle profile doesn't affect ECU tuning. But if you are already an AUDI, there is nothing to change for you.
Thanks for making these OBDEleven videos!
I just picked one up myself and it's in the mail.
Just wondering if your EQT Stage 1 ECU+DSG tune will affect the changes made? Or vice versa?
No the ECU tune and DSG tune are separate from the canbus module coding you can do with obdeleven or VCDS.
Very good video. Learned three things. A) it is fun playing around, coding your car
B) Audi has better coding
C) Maybe consider buying an S3 instead of a Golf R, maybe...
Changed Mine Over To Direct In Carista super Easy No Issues
It generally works, but Audi setting eliminates some ACC functtion, predective speed limit display and distance warning in front assist. I don’t feel any throttle improvement when setting the engine to Audi. Setting module 44 to linear does the trick and increase the consumption as well. When I change the engine to Audi the consumption decreased to normal. No throttle improvement. Vw tig allspace 2.0 tfsi 22.
Do you think this will work for a 184 HP 2.0T 2018 volkswsgen Tiguan?
At 4.55 in you video you talk about changing the ACC (Adaptive Cruise Control - Control Unit/Module 13) to Audi ... how do you do this I can not find any setting in that module to be able to do this? I have traffic sign recognition working in my car with sign speeds displayed in my dash but no overspeed warning or being able to set warning on multimedia screen (have a 2020 MK7.5 Golf R fitted with Discovery Pro Navigation/Audio system - Australia model car - Final Edition). I have however found two settings in Long Coding which are currently deactivated ... 'Speed_Limit_assistent' and ' Traffic_Sign_Detection'. Love your videos very well done and informative ... not like some who do not talk at all and do things so quick forever going backwards etc. to see what was done, and even then some things can't see as fingers in way. Anyhow new to this just bought this car new in August 2020 and my OBD11 about 3 weeks ago and still learning.
Changing the throttle responsiveness was one of the first OBD eleven tweaks I did. Last night, I changed the engine responsiveness to Audi thru the app section which was 10 credits. Is this the same thing you did, but you long coded it? I turned it off without trying it out because I read that ACC won’t work and it will throw errors. I have a 2018 Golf R manual Cobb protuned. So I wonder if I will even feel a difference?
That’s why I didn’t use the app. Long coding manually plus cruise logic change makes it work with no errors. Yes you’ll feel it. That’s why I made the video.
Netcruzer RC TECH CARS oh ok. So In my case. I just have to long code to change to Audi increases responsiveness and long code to change the ACC to Audi too, right? I don’t have a DSG and I already turned on increased throttle response thru using credits.
Obviously, I know you can feel a difference. But I’m wondering if I WILL feel a difference since I’m far from stock. I read some saying they didn’t feel a difference, but I still wanna try it out.
Update: all I had to do for me was change the ACC to Audi and Engine responsiveness to Audi. Everything works fine. I can feel a slight difference when I accelerate. But I don’t think it’s as big as a difference since I’m not stock. Works though 👍🏼. Thanks
I own a Tiguan, assuming close to same settings, do you think this would put the Tiguan to the Audi Q3 performance in the same engine base and awd setup?
hmm ive done a lot of testing on this too.. most people think driver profile switchover is just that.. effects when you change driving profiles.. but if you found it changes throttle.. thats interesting..
Subtle throttle change in they steering adaption which is a very odd place to put it but it might be a placebo. The Audi hex engine coding and cruise to Audi brand-logic has a much more noticeable effect.
@@netcruzer cool. my car has both rough road optimization and starting vibration reduction. i turned them both off.
I saw that! Watched it last night. :) my 2018 R was built 5/18 I’ve only got rough road.
@@netcruzer ah ok, didnt know if you were familiar w my channel
you did help me remember my driving profile switchover tho, and i checked it. i had it gradual instead of direct! although i know i had it direct at one point, i must have put it back for some reason. anyway, i now have it direct again just to be sure. im still hunting for the real way to disable start / stop without the warning lights.. and i dont want that DIY auto-set module either..
I don’t have ACC on my 2019 but still traction control won’t work. Went to change the brand to Audi but gave me unavailable error. I’m guessing because I don’t have adaptive please let me know if you ran into this before.
On my engine control module, byte 00 screen isn't showing those bit's to activate audi engine coding.. (mk7 r)help?
Pretty cool!
Think this will work on a 17 Manual R?
Yes definitely will.
Did it work for you?? I have the same
car
i have the obdeleven and a MK7 golf TDi. will this audi coding thing and throttle response work for that and lastly, is it safe?
Where excatly i can find adaptive cruise control function to change to Audi ? In long coding ?
Thank you for doing your homework and sharing the results. I had done this previously but only used step 1 (No audi code change). I felt a difference but didn't like it. Might try again. By the way, have you played with the increased traction (haldex) mod and disable xds? first change seems to increase haldex response and makes it seem more awd. Steering feels heavier too but not sure it's a placebo. Latter change disables rear braking when turning (I did this to save rear pad life). Would like your opinion on this if you get it done. 👍
I have not adjusted haldex settings. I’ve heard it has a significant effect on economy due to added drag of AWD system.
@@netcruzer I've had it on for about 900 miles or so. I can't confirm if it's drastic enough. My mpgs range from 18-24mpgs, it's all dependent on how spirited my drives are. You may like it, there's an improved feel entering longer sweeping corners off/part throttle (I dont drive aggressively on the roads to avoid attention). Has a reduced fwd feel to it. Conversely, the settings can be adjusted so haldex is weaker and delayed and in combination of disabling rear brake (drag on each wheel) mid corner to improve MPGs.
hi, very nice guide. thanks alot for the acc help :)
But why did you uncheck bit3 and check bit1 in the engine longcoding under byte0. thnaks alot
Because that’s what you need to do to get a final Hex code of 02 for an Audi 2.0 TSI engine. It’s shown in the upper right I think. Hex value is what you are trying to change.
hi, thanks for the quick reply. I read that it was only Bit 0 which is changing the mode. I already noticed a change by only swtching it. So i get 0A now instead of 0B. I got a Cupra Ateca, but I guess its works the same.
I found my notes and some screenshots back. Bit3 seems to be a checkbox for the information about the car beeing a limousine or a sedan.
and again, thanks a lot for your videos. I am watching them all at the moment, maybe i'll find some new tweaks 😁👍
here is the link to the screenshot:
i.ibb.co/mSKkWfw/Screenshot-20200130-195706.png
HI, can make Tiguan 2018 R-line work?
Do you need a pro/unlimited to make the adaptation change. Thanks in advance.
Yes you do, unless they’ve added it to the “one click apps”, then you don’t.
U think id be able to do this on a mk7 golf?
Do you think that would work for the tcross 1.0 Tsi? I'm so tired of the slow response on the pedal of the tcross.
Pretty cool!
Can this work my Tiguan II 2018 R-line has REVO Stage 2 and TVS Stage 2+ ?
Do you think if I go pro I can get more features like ambient lighting at the minute its telling it's not supposed.
I think it works with my Leon Cupra MJ18, because i feel it ( I will test it for a while! ). But my default hex was 0B ( Byte 0 - Bit 0,1,3 ). ACC no problems, and no errors! Thanks :)
Do you think the linear throttle change ODBEleven (which I have) would work with a Seat Ibiza FR?
How does this affect your gas mileage?
how to code audi mode to seat leon 5f so i can use cruise control. i dont have acc module listed or instaled in car only normal cruise control...
idk why but i followed your steps on my 2018 alltrack but not able to get cruise control
Hello, this method only works with Vw and Audi?
I tried removing speed limiter on my f30 this morning and it said failed. Is it possible for BMW?
Should this work as well on the facelift model?
on arteon it gives red error about brakes p164700, checking coding/versions of? cannot clear it. Anyone else had it?
I have a 2020Tiguan Comfortline without ACC, only have the CC. Do I still need to make the Brand logic change to Audi, or can I skip that? Also, you have a mod to disable engine start/stop feature? The voltage method (changing to 12V) didn't work.
Hi, I loved your videos I’m also a Canadian and I bought a 2018 golf R DSG as well a few weeks ago but I don’t have the Adaptive Cruise Control and I don’t find anywhere the info to Code the “normal cruise control” to Audi
I’ve done the pedal and engine to Audi no problems except now the normal cruise not working and error with “!” In the cluster with cruise sign…
Anybody solved that issue???
can u help me i dnt know what i did with coding in obd eleven long coding
my a/c stop working
adaptive cruise stop working
lane assist also
blind spot too
all not working please help me to set it back or reset
I did change to Direct in my Skoda Superb 2020 and I could not feel a difference, this is like you describe it in the first part of your video.
It's subtle, but I definitlely could notice it on my turbocharged VW. Even more with a Stage1 tune.. so much initial throttle now that it's hard to smoothly accelerate I might revert back to stock throttle logic.
@@netcruzer I did not yet do the Audi coding. Only the change number 1 of your video.
Do you think the Audi coding is doing more ?
Hello or does it work on the Passat B8? Thanks
Would this work for a golf?
Do you know if this can be done to a Skoda Octavia Vrs 2016?
Can you show how to do this on obd11 pro ios? I've been trying to figure it out but the long coding setup is a lot different.
There is a toggle at the top in iOS to
Change the view of long coding if I recall correctly. I have a next gen OBDeleven video on my channel.
Safe to do this on a mk7 tdi?
Will these options work on a mk7 GTI buddy
your launch on 3k?
how do I get my cruise control back working??
I tried it on my Golf 7 GTI Performance from 2015 but it doesnt let me change the manufacturer to audi in the enginemodule. Can someome help?
Does it void warranty?
Works for manual too?
Hi. I don't know if you will see this message. I would like to ask you if the same setup can apply to passat 2015 DSG 2.0 TDI or not? Thank you
Does this work on a mark7 GLI?
Setting the Audi engine code (byte 0 --> set to 02) made my car throw a static fault code in the brake unit (P164700). Reverted back, cleared/re-scanned and fault is gone. CAD 2018 Golf R without DAP/ACC here. Does your car show any faults now after a re-scan?
Did you skip the 3rd part since you don't have ACC? I'll try it on my car later - i also don't have DAP
I can do the first part but the second part gives me an error. NA 2018 Golf R here
@@LayMamaHoMah I did skip the 3rd part as non-DAP cars wont have the ACC control unit. I suspect the brand logic has to be changed somewhere else for normal cruise, just not sure where it is located. Also I don't think the "driver profile switchover" setting has anything to do with throttle response, more likely linked to drive mode changeovers.
is this going to “mark” the ecu as a flash? as in void the warranty?
No this is not an ECU flash. It’s canbus module hexadecimal long coding.
Will this work on a Seat ibiza 2019 1.0tsi 115hp? Thanks!
Did you try it? I have a 2021 Ibiza FR 1.0 TSI 110hp
Would that work on 14 cc rline with a dsg?
Would that work okay for a mk7 2014 Gtd
Please help me fix the cruise control
1. Go to control unit ( engine )
2. change back to VW (Bit0)
3. save and clear all errors
CC should work again 👈
I know because tried this mod on a 1.6 TDI
Engine responsiveness won’t work when you only have CC.
Pedal throttle can work.
Will this work on my mk7 GLI?
Interesting i did this today but my ACC and cruise would only work if i left the brand logic as "Vw". As soon as i tried changing it on the last step my cruise control error popped up. Anyone else have this issue?
can we do this for audi q3 2018 ?
please please help me to fix my Audi i dont know what things i change now its 90 temperature and no a/c and neither anything working
Do you know if that starting on vibration reduction actually increases the clamping force of the clutch packs
And do you know if your 2018 model has the DQ381DSG version
Does this actually lower the pedal slightly ?
No. It’s a throttle mapping adjustment not a physical pedal change.
Little late but I tried it and everything went well, untill I wanted to do the “audi brand logic” thing. I don’t see the “brand-logic“ option anywhere. Can someone pls help me? Because I do have the acc error right now
Great tips! I have a question for you, where did you find the information for the Audi Engine coding (Byte 00 with Bit 1 selected = Hex 02)?
I know you have a 2018 mk7.5 Golf R, and I am trying to code a 2019 GTI. The default engine code of my car is the same as yours (Byte 00 with Bit 0 and Bit 3 selected = Hex 09) I just want to make sure I am looking in the correct place. I tried your coding, and I did receive a Cruise Control error that I couldn't resolve, so I had to put the engine code back to default. Thanks in advance!
Any help would be appreciated.. I tried this on my 2020 GlI basically a GTI an I can’t figure it out. Now I don’t remember my factory setting.... do you know a way to get it back ??
@@joejoewilson4 There is a history in OBDeleven. trace back the changes you've done.
Help me I have a mk7 2016 I did the first two parts and I am not able to have cruise control but I know it is cause I don’t have acc do you know how to fix it?
I had the same issue. I changed back the settings as I couldn't fix the cruise control problem. I have a mk7.5 2018 GTI with no ACC.
In the gateway long coding there is an option for DCC turn it back on. It broke mine too and that fixed the fault
should be the same process for MK7 GTI, correct?
Yes
Hi, Folks. I was trying this stuff on my 2016 MK VII Golf R WITHOUT ACC. I couldn't get the regular cruise control working with the Engine coded for Audi. I was able to get the Driving Profile Switchover changed from "Incremental, controlled over time" to "Direct: controlled over threshold value" and also got the Engine Vibration Reduction "Deactivated". But when I coded the Engine for Audi, the cruise control went wonky. Anyone have any thoughts on a non-ACC-equipped model? Thanks!
2018 Golf R MK7.5 - I tried this and I was able to code 44-Steering Assist (Direct: Torque controlled over threshold value), and 01-Engine (switch to Audi) but I was not able to code ACC as mine is called 13-Auto Dist. Reg and it did not have brand_logic in long coding or adaptations. Likewise for 03-Brake I did not find Starting Vibration Reduction. That being said I got no errors and cruise control worked, not sure about the ACC as I didn't want to follow the one car on the highway as it would be weird. But no codes. Overall I'm loving it. So much nicer pedal to torque feel. I'll test launches later. I did get the dynamic road signs warning options in the Nav car settings and I am able to adjust my cruise control in increments of 1 mph. I'll look for rough road optimization.
Do you have the driver assist package? The cruise control module should have brand_logic in long coding menu. I have sale year car but mine is Canadian.
@@netcruzer Yep I have DAP and it's a DSG car. My module is 5Q0 907 572 J but it definitely does not have brand_logic.
@@netcruzer Also thanks for the vids and all the work exploring this!
@@netcruzer Okay I tested the ACC after the mod. For my module, I did no coding change in the ACC at all and it works! 2018 MK7.5 NAR stage 2 Uni ecu/tcu tune with DAP. I'm loving these mods, the throttle feel is sooo much better TY!
@@hanshobbies Thanks for this comment bro.. I have been searching here, trying to find brand_logic and couldn't find it. At least I know yours worked without that.
Tried the engine coding on 2019 R and received an error: (22) function cancelled: marginal conditions have not been met.
Ok not sure why. Another person with a 19R has send me messages and it worked for his car. Stock engine code for Byte00 was hex09 for mine and his. We changed to Hex02 for Audi, along with the other changes in this video.
that generally happens when battery voltage goes under 12 volts. Safety function.
very helpful video, thanks
I assume this will work on a manual 2014 MK7 too?
Yes it will
Have you tried the newer generation OBDeleven Pro?
I've done exactly what he said on the new OBD11 and worked fine =)
I have mk7,5 R and I don’t have ACC, what are the steps to get the Audi throttle response.
Same way except you will to lose cruise control.
Netcruzer RC TECH CARS is there a way to code for cruise if you don’t have ACC? Or you are kinda SOL with the new linear throttle response ans engine code bit 00?
Does doing this flag the car if it ever gets scanned at the dealer?
No this is different, it’s not an ECU flash. My old GTI was highly customized using OBDeleven
And canbus longcoding. In early 2019 VW scanned it my MK7 GTI and accepted it for Certified Pre-Owned resale!
@@netcruzer Good to know! We are going to do this to a pair of '19 Arteons 😀
Do you need any credit if you long coding or change adaptation value yourself?
Nope