ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Hey! I am not a huge game fan, but sometimes I play with the DIRT Rally and some other games, so it was the motivation for me to design and build this wheel and pedals. In the future I am going to make a video about the building process. Furthermore I want to design and build a shifter and some other stuff too. If you interested about it, please follow me.
Some information about my wheel and pedals:
3D CAD pictures:
drive.google.c...
Based on this software:
www.xsimulator...
DC motor: Denso 45200 05271 from a Toyota
Power supply: 12V, 40A
I used 2 BTS 7960 motor driver in parallel
Drive ratio: 4:1 with HTD-5M (25 mm width, pulleys: 60 and 15)
Encoder: OMRON E6B2-CWZ1X
- Mainly I used aluminium for the frame and steel for the shafts.
- I wanted to use the least amount of cable, so I used slip rings for the shifter paddles and the buttons on the wheel. With this solution does not any limit the number of wheel rotation.
- It can produce more than 20 Nm torque on the wheel.
The paddle shifters: Yes I know, in this video there are in a wrong place. When I made this video it was among the first tests and I have never used a paddle shifters earlier and this layout seemed comfortable to me.
Later I changed the layout to the standard.
Thank you for the reading and watching! :)
![DIY Force Feedback Steering wheel | Circuit and Software Setup [in ENGLISH] , DIY Sim Racing Wheel](http://i.ytimg.com/vi/crdDhvhBG0M/mqdefault.jpg)
![DIY Force Feedback Steering wheel | Circuit and Software Setup [in ENGLISH] , DIY Sim Racing Wheel](/img/tr.png)
Wait what huh your using the left paddle for up shifting ????
Dimo yea saw that to
Yeah, I used it... Now I use the "classic" layout :)
Huh no😨
Because he dosen't have experience of shift pads
at least he doesn't brake on right pedal and accelerate on the left one
Holy shit this is probably the cleanest DIY wheel I've ever seen,
Sometimes I got jealous at engineers, they could build anything
Thank you very much your kind words!
corniel
Stop being jealous and learn then
@@Ambigious chill
@@Ambigious it doesn't work like that
@@ZerpsT
Ofcourse it does. He has time to watch this, so he clearly has free time. Go learn if he wants to know it. Nothijg comes free
looks almost like that table is going to fall appart from the force feedback, nice video!
Thanks! Yeah it is qutie strong, the table is not the final place for the wheel, it is temporary solution.
adds to the immersion
Lol i had to buckle down my much lower NM G29 and table a bit more secure and ramp up smoothing
@@tomthomas21 Hi bro! A question, for this project, can I use a 24vdc 100w 250rpm motor?
@@godvsevolutionmythgodvsevo1038 my G29 only barely makes my desk shake a tiny bit (and its just IKEA so..)
A video on the electronics side of this would be incredibly helpful
It's so cool how everything is exposed so you could see how it functions in action. And also easier to repair if something goes wrong.
Yes, I like see the "raw' mechanism behind the machines.
Finally a DIY wheel thats not made out of amazon packages and unfinished renovations.
what a Clean, Nice build man! But left paddle is downshift, right up ;)
Thank you very much! Yeah, I know :)
@@tomthomas21 How much for a kit?
wow amaizing. when u will make full video about how to build and what to use. I mean electrical parts and how to put them together?
Dude, You can make a living out of making and selling these at low rates than the competition. Great Job!
Yeah, if they have a housing i’d gladly buy one
MADEZZO GAMING
...but he doesnt have a lower rate thsn competition... do no, no he cant
Oh my god! This DIY wheel is good quality stuff! It's really good looking! If you have time, can you do some sort of making-of series, or a tutorial? This wheel seems different from the rest DIY FFB wheels, this one looks pretty good, you did a great job!
Hi! Thank you very much! Yes, I am going to make a tutorial, but these days busy for me, so give me some time.
@@tomthomas21 Of course! Take your time
tomthomas21
...please dont forget atleast ;-;
How much did it cost to build if you don’t mind ?
It is a hard question for me right now, because I had a lot of parts from my earlier projects and I made the unique metal parts, so I hadn't to pay for them. I am going to make a video about the building process and a cost calculation later, so give me some time and I will answer Your question.
tomthomas21 oh no I’m sorry I didn’t mean to the cent I was like roughly speak g what would it cost in materials I’m guessing by time You factor in the man hours you could buy the highest end wheel available and most likely still come out on top at least for me and I’d assume you judging by the quality of your work you make enough that the shear amount of research time it’s not a financial advantage to build your own sim wheel but it would be a fun project ! But thank you and I will watch that when you make that video it would be interesting to see a build time lapse and explanation of what the processes are for sure you did a beautiful job for diy I’m not a expert by no means on sim steering wheels but the construction looked very nice and the input and feedback system was impressive .
Do you have to have a software or driver that you also programmed to interface it into the pc? That is as impressive as the wheel itself even in my eyes !
Take care
Wayne
@@joewayne9951 Thank you very much Your kind words! Sorry, but now I cant tell more about the costs, I need total rethink this part. I wouldnt like to give incorrect numbers.
The software was ready I just used it.You can see in the description part. I dont know who made it, but He is very talented!
@@tomthomas21 you did not do it you piece of sh***...lol.
it would be better if you made a video on how to make it with assembly
Love the slip ring implementation. Great job! Construction vid pls!
Also have you tried other firmwares for comparison - EMC, MMos (STM32)?
Thank you very much! :) I havent tried yet other firmwares.
Man come on it’s not complete without 3 pedals
Can you make a tutorial
can you please make a tutorial
Hey man, nice work i would like to see the project how it was made, waiting...
Thank you! I am on it.
@@tomthomas21 op phone and
Kinda not understand. Where is the cable that connecting buttons on wheel to the base board?
1:41 when someone killed you on fortnite✨
OK zoomer
@Kapi n u
@Kapi Yeah
Fucknite
I love how overengineered the data connection between hub and base is!
Sure, a spiral cable would probably have done the job just fine, but *infinite* degrees of rotation is god damn awesome!
Id assume the short wheel rotations is due to rallying but can you go up to 900 / 1080 degree's of turning on your wheel?., looks amazing great work!
Parabéns pelo projeto, amigo. Simplesmente sensacional!!! Saudações do Brasil.
20Nm for something this small?!
A few work out with this around monaco and i i'll be strong as samson
Hey do you have full plans how to make that steering wheel, looks awesome and high quality not like Logitech g920, great work
Cool work but up shift is on the right not left.
Thank you very much :) Yes, I know that...
excellent, clean work! well done! (I suggest to put all the infos into the video description hence anyone could easly find them :) )
Hi! Thank you very much! :) (I would like to do this but I havent had time)
A clutch and a shifter and you're all set! Very good job, you can start making your own products and sell to the people, from what I see is very good quality, hat off to you!
Hi! Thank you very much your kind words! I am going to build it in the future.
Hey, great work! Do you still intend to do a how you built it video?
Wow that's absolutely awesome! :O
Do you know how good this thing performs in comparison to a T300RS for example? Or any other "good" wheel? :)
This wheel has over 5x the torque output of a t300rs.
You'd have to compare it to a $1000+ wheel for a comparison with something that comes close.
The power that this thing has put on max will rip your arms off (not literally but close enough) 😂.
@@Ssh52 Yeah ok... but how precisely will it work? Should this also be better than a T300RS?
@@UnknownUserDE Nobody will answer, but I will. 20nm of torque is equivalent to a fanatec dd2. Does that give you an idea?
That's an amazing diy wheel! Very well done, you can be proud of it.
Edit: The force feedback is belt driven? How well does it work and is it comparable to off the shelf wheelbases?
Thank you very much your kind words! Yes, it is belt driven (HTD-5M, 25mm width).
I dont have much experience for comparison. I have only tried a Logitech G27, but I think my wheel is much better.
Thrustmaster or Logitech must be Recruit you sir. (From Indonesian With Love)
Or rather, he should start his own company and become a competitor to them.
Que ingenioso mi hno gran trabajo el que has realizado ahi like y sub.
Gracias! :)
I can see and hear the clipping, but BIG RESPECT to your creativity and DIY skills. Today there are tens who make pedals but only 2 major wheel manufactureres. I think this is because it's not easy.
Hello, you say you have 2 "BTS 7960" controllers connected, but in the video I only see one, how is the complete diagram that you used?
The desk does not survive 24 hours race from Le Mans. 😂
I'd be surprised if it handled it for 24 minutes.
projenizi 4 yıl önce paylaşmışsınız umarım mesajımı görür ve cevap verirsiniz yaptığınıza benzer bir şey bende yaptım fakat masama zarar vermeden direksiyonu masama sabitleyemedim clamp baktım yapabilirmiyim diye ama pek birşey bulamadım yardımcı olabilirmisiniz acaba
Hi @tomthomas21
Do you like 4:1 gear ratio?
Funny, i doing also with similar ESP motor :D now trying decide what ratio use.
Also 2x BTS 7960 driver in parallel will be ok?
DIRT RALLY !!!!!!
But dude, excuse me, do you made it by yourself ? You're a genius or what ? Do you have force feedback on it ?
Omg man, I'ts Amazing, more one subscrible
Thank you mate! :)
Hi,amazing job is done. Wheel looks from side almost like real store pro spec branded wheels,so clean look ! This thing with DIY steering wheel is way to DIY direct drive wheel and to build it cheaper than they are now... I can suggest to tray PC game : Live For Speed(LFS) ,that game has most advanced ffb feeling from all driving sims at this moment,in my opinion.
Hi! Thank you very much the kind words! If I have time I will try the Live For Speed :)
i don't like mmosffb, and other public firmwares, sure they include their own config utility etc but i'd rather be able to edit the code wherever i want instead of depending on their software/firmware
especially since i'd be willing to run it on whatever hardware i want instead of being limited to a Leo or STM32 board
Most amazing setup ive seen till yet..i wish you could share more details about it as it got me excited
Hi 👋🏻 I hope you are good these days. When I see your video I was very happy and excited. Because I can make my own steering whell. I hope you can make high detail build video very soon I really need this project. Cheers 😊👋🏻
Brother when will you put tutorial for this it's already 7 months
th-cam.com/video/uNz-OkRCH0U/w-d-xo.html
What i would like to know is can you replace the BTS 7960 with a UMLIFE 1PCS DC 6-60V 400W BLDC Three-Phase DC Brushless Motor Controller, how would it be wired, and could it power a hoverboard motor ?? cause if i can simply connect the ardunio to a brushless diver and use a hoverboard motor A: it would cost less to make, B would be way easier to design, C: be a direct drive with very accurate FFB.
He *plays the game*
The desktop *Its an EARTHQUAKE!!!!*
is this a direct drive wheel?
Great job. It's look beauty and efficient.
Thank you very much!
can you do a detailed video on steering feedback system you have buily
So do you have a guide or something on how you built this because I’ve been wanting to build one of my own and this looks nice
Out of curiosity, why did you use 2 motor drivers in parallel?
any tutorial for how to make it
because maybe it would save a lot money than bought official steering wheel (like logitech, thrustmaster, etc.)
I am on it! :)
That looks mad🔥 i kinda like it open that u can see the inside tho maby a tutorial on how to build something like this in the feature?
th-cam.com/video/uNz-OkRCH0U/w-d-xo.html
Manoel thanks mate
Hi buddy, will you upload the video on how to do this project?
please please please do a build video soon would love to follow along and do something similar!!!
hey, this looks really amazing, I am really impressed by the amount of work you have put in to make this look so clean. I would like to ask you for a small favour, if you don't mind, please share the 3d step file for the model so that I could make a similar DIY version for myself
how to connect bts7970 in parallel, do you have the schematic? it's Hard to find it Internet. I'm sorry, i have zero knowledge in elektrical but I'm trying to make diy sim wheel & trying collecting Knowledge about it
1:50 What is that whistling sound I can hear when you test the wheel? It also seems to be present when you drive afterwards, although masked by the car sound.
Need you to do a direct drive set up with an emegency off switch. it'll be pretty awesome.
from that a frame, and even later down the line a motion rig setup.
Nice creation, i know you have auto clutch but where your clutch pedal? ,lol that stearing prep rotation sounds like a AK47 , you'll need some cushoning dampning for that support table ,Hi do you know of any LCD touch screen mod that does track map view on steering mods and inside game track map view on steering ?
Hy guys, I wonder if anyone can help me! I'm using an xbox and a thrustmaster tmx. My idea is to turn the tmx to a direct drive wheel by using my existing wheels motherboards and the whole system. Lead the cables to an arduino instead the original motor. The arduino would control a powerfull servo. Is this idea completely wrong?
we steel waiting for the building process !!!!
Good Morning used stm32? how many bridge H? which source? how much strength reaches Nm? does not heat playing? thanks

hello my friend, do you have a chance to give the pedal design?
great design friend really enjoyed I have a homemaker too, so I would like to know what program you use on the pc to control the steering wheel. Thank you very much in advance.
Hi! Thank you very much! I used this solution:
www.xsimulator.net/community/threads/diy-ffb-steering-wheel-mmosffb-in-progress.7769/page-8
Can you tell me the diameter of that 60t timing pulley coz in my region gt2 60t pulley is available but the diameter of that pulley is like 4.5cm and i think that will be small pulley for a better torque.
Btw im using the same wiper motor as you are using with gt2 15t timing pulley
can you please put out a video on detail how to incorporate 8 buttons with only three output? I'm trying to do that but I don't know the connection and what type of resistor to use, I saw the video you put out last and the circuit diagram cofuses me a little bit, can you explain that circute please??
The encoder must be printer one? Can't it be the Arduino Fc03 Sgk encoder? I have trouble finding the printer encoder, can I use something else
0:23 its kind of potentiometer or what?
Did you get answer ?
@@ВодоводиКанализацијаПрилеп nyet, but i think, that just a spring, cz with encoder u allready know how much degree steering wheel is..
Actually with all that exposed internals, you should make a Plexiglas cover to the whole thing.
yeah maybe another fan too
Hello, I made the same steering wheel based on Arduino using the resources that you left under the video, the steering wheel works it is determined by the computer, but it does not see the game, in particular dirt rally.Can you help me?
hello, I was thinking of building a driving position with the dashboard of a car too, could you advise me and explain in private how you did it, thanks for your attention.
I thought DIY meant Cardboard and stuff, you built a steering wheel that looks like its factory made!
Hello. Well done. But please explain. As you have the encoder crossed with the steering shaft ? How is the recoil motor crossed and what is it used for from what ?
background music please :)
How you fixed/changed the dc motor shaft? As i know it have shaft with you need to put in similar shaft
Cool!
Thank you! :)
Can you please tell me the model of that Momo steering wheel or provide me with the link ?
Hi can i use cheap chinese encoder with v5 to 24v rated without supplying Arduino 12v?
You are a genious man! Hahahah I'd be capable to build one! How much costs all the project?
wtf everything looks so clean and then the wheel clearly isn't centered. the wobble when you turn the wheel looks so wrong :(
wow it's amazing, i'll waiting for that tutorial
where did u connect ur shifter paddles to the arduino, looking to make one myself too
How much money u spend on this bro?
0:22 what is this encoder ?
Did you get answer ?
That's look like omron rotary encoder. But u can use any rotary encoder 600 ppr or 1000 ppr
Hi. Hey, buddy. The battery needs to be connected with current limiting resistor.
cool project will this work on a PS4
How much all this cost you brother?
Can i use diffrent encoder with similar parameters, or only one would work?
tutorial or making of vid would be nice af
Maybe he makes a ebook with video for sale
The table adds extra force feedback
With that torque, you will have to learn to hold the wheel military-style or lose your thumbs LOL. Amazing piece of work.
:D Thank you very much! I dont use it at full power, just about 40%.
good morning friend, what is the dimension of the axis? thank you in advance.
Why not clutch pedal?
En la descripción dices que usas dos drivers en paralelo como es eso posible en el foro no e visto nada de eso en el esquema
hey, maybe u have still a cad model with dimmensions this electric motor from toyota ?
How many degrees does this rotate? 900? 1080? 270?
what is the diameter of the main shaft and the diameter of the motor pulley?
I like it!
Do you have the recipe/ spreedsheet/ plans?
How much torque ur engine produce's?
The Logitech G29 pedal set inverted can be used to make ur pedal setup?
I'm. Asking because I swapped the G29 base engines for 1 with 10Nm torque, also changed the gears from plastic to steel to negate the plastic gears imperfections/ degradation.
I just don't feel good about buying a steering wheel when you can make ur own.
FANTASTIC job! 10/10
:)
It blows my mind how clean the wiring and the steering wheel base looks ....im genuinely shocked .
Hi guys, where can i find or buy the same metal tubes ad in this video???