Briggs & Stratton 7.25 carburetor replacement

This is the process I did for replacing a carburetor Craftsman lawnmower with Briggs and Stratton Platinum 7.25 engine.
Replaced with OEM Briggs and Stratton carburetor.
Tools used was impact, ratchet, extension, 5/16" & 9/32" sockets, needle nose vise grips, pliers, regular screwdriver.
Carburetor from Amazon: Briggs and Stratton 594058 CARBURETOR a.co/d/8W3kmAl
Follow me on Facebook
www.facebook.c...
Also follow me on Instagram and TikTok
Email [e-mail]

[@kt1564]

Thanks!

[@LazyGrandpasGarage]

You're welcome, thanks for watching.

[@CombatDoc54]

Got the same OEM B&S carb 3 days ago. Changed it out as per your video. One pull, one start. Cut great for an hour then I called it a night. Got a break in the rain today so went to mow some more. It was hard to start, had to use some ether. Got it started, engine smoothed out in about 30 seconds. Cut for about a half an hour then backfired and died. Let it cool down. Checked oil and gas. Won't start at all now not even with the ether. It doesn't even sputter. Just nothing. Any ideas would be super helpful. Thanks!!

[@LazyGrandpasGarage]

Pull the plastic cover off the engine, check if chock is closed or stuck open. Sometimes chock lever on top of carburetor rubs against metal plate on left side. If so, bend the plate slightly so it clears. Also I had a couple where choke spring fell off after using, verify the spring is in place.
Verify valves are set properly.