ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
I have the Ignition on but there is NO Power to the bike??
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2019
- In this video I show you the location of where the problem is & how to fix it.
4:50 Location of Starter relay
6:41 Removal of relay connector & replacement of fuse
30amp fuses
amzn.to/2AQjEY2
If you're watching this for the first time save yourself some time and just jump to the six minute mark on this video to get on with what he's trying to say.
Seriously! I been cussing at this video. Like duuude get to the mu tha effin point!
OMG thank you
I know right thanks
Thanks lol
Thank you !!
I just wanted to thank you for making this video. This happened on my 98 zx11 and I thought I was going to have to take it to the mechanic. $6 dollar fix got me back up and running thank you again.
your welcome please subscribe for more upcoming videos.
YOU SAVED MY LIFE I had just recently changed spark plugs rectifier stater and battery and starter selenoid and when I changed fuel pump and tried turning it on everything went dark and it wouldn’t turn on even w my jumper cables and i literally found your video and went outside to try it out and it work your a legend bro
Yooo I've done all the things you have. Even just wasted $360 on professional work and a new stator..... Put on by them. No fkn way the fuse is blown out. I just put an entire new starter relay on my 04Gsxr600..... This shit has me so fkn depressed................................
My fuse wasn't blown, it just wanted to be taken out and put back in. Would never have thought of doing this before watching your video.
Thanks! you save me from leaving my 🏍R3 @ the shop for a week + and the shop charging me $300 for this simple repair!!
I checked the fusebox first and everything ok, then I star thinking how cars sometimes have more than 1 fusebox and found this 30 amp fuse. Nice video
Thank you for the video! Checked my fuse and it wasn't blown up the top had melted because it is next to the battery and was working sometimes which made me think it was a fault wire somewhere. You saved me a lot of money, cheers
same with my bike
I cannot thank you enough!
Exactly the same problem on my KL250 Super Sherpa!
I found the 30a blade fuse plugged in below my solenoid and checked it. All good but still no power…
I never imagined that it was just the spare!
After watching your video, I pulled the top plug off of my solenoid to reveal the blown 30a fuse!
You are the man!
Thanks for taking the time to post this video.
🍻🍻🍻
Your very welcome as at the time i wasn’t thinking to make or post a video about my situation but figured why not just Incase cuz who knows maybe it has and there not many videos at the time Giving any good explanations on how to fix the problem. Don’t forget to subscribe as i have many other videos on my channel with similar situations and how to resolve them.
Something caused the fuse to pop. Probably the exposed wire you mentioned. Should have taped it up at least. Aside from that, great video. Thanks
You saved me so much. i was about to pay 400 bucks to a mechanic who lied to me but this worked perfect and it didn't cost me anything.
glad i was able to help ya mechanics are thieves & are there just to take advantage of people to make money.
Just found your video and had the same issue but on my ninja 400! I found my starter solenoid under the riders seat next to the ECU. You sir, are a life saver. Thank you so much for making this video when you did!
your welcome im glad I was able to help =)
MAN you rescue my bike and life greate video I check everywhere and I just find your video and its bull"s-eye my bike back to life thank you very much for your video and tip
your very welcome and im glad that utube is still circulating my video
Thanks for the help Sir! Helped me get my 2013 Honda CBR 600RR Repsol back on these Las Vegas streets. 🏍-------- 🔥
no problem im glad I could help, trying to save everyone from getting ripped off by these shops
My bike was sat for a week in the garden, couldn’t figure out what was wrong with it. Came across your video and boom.
Sorted, saved my few quids. Cheers mate.
your welcome glad my video was able to help
Thank you so much. I was in awe what happened I thought my ignition switch was faulting but I changed the fuse and it worked again. Bike saver!
Your Welcome im really glad I made this video as I see that its helping soo many people!
thank god for people like you ! you saved me a lot of trouble
your welcome =)
This was excellent and very informative.
Jerks below have no patience.
Good luck to them on the roads.
Thanks bro. Exactly what happened to my bike, except I wasn't working on anything. Now its going again
Yep good stuff mate you helped someone in Australia I tried to jump start my bike hook the terminals up backwards and blew it
Hello mate,basicly i’ve done the same thing.Had a flat battery and a mate of mine said let’s touch both batteryes so the thing could start…worked 3-4 times,untill he touched the + with - and the other way.Fuse blown,changed the starter selenoid,new battery…but the thing won’t give a sign of life anymore….it’s a 04tmax 500
Thanks so much..... My 98 Honda Shadow VT1100 suddenly wouldn't start, no lights, etc. As you commented, who whoulda thought??!! GREAT video..... THANK YOU. It was a lifesaver for me. OK, well, a bikesaver.... :) David
no problem glad I was able to help. this is why I make videos like this to help others as it seems like there are no videos out explaining how to fix issues only videos on showing the problems which is stupid in my opinion
You just made my day! Fixed my CBR600 just now! Ty ty Ty
Had the problem on my 2021 Honda Forza, started with battery failing, then dealer guy messed around and no instrument power ( in Thailand!). Had already found the start today fuse holder, with FUSE marked on it, was on the right track but unsure how to get into it before finding your video. Even had the spare fuse like yours. Kudos and many thanks!
your welcome glad my video was able to help you out before taking it back to a shop that would of charged you alot of money for a simple fix
Thank you my friend! You saved me I had to take my z1000 to the workshop tomorrow if I haven't found your Video!
your welcome glad this video was able to help you out
Brother, Thanks a million. I had the same problem with my Honda Fury. Great troubleshooting technique. It worked out perfectly.
your welcome glad i was able to help out
Thank you I was going crazy and your video helped me because I found the 30 amp fuse and it was no good on My Vulcan 1700 Kawasaki 2010 thanks again for the great video it was very helpful
no problem glad I was able to help
THANK YOU SO MUCH!! I had this exact problem on my bike and sure enough it was the fuse you mentioned. Thanks a million for posting this video!!!!!
your very welcome and really happy this is helping so many others in keeping there bikes out of costly shops
Great informative video. Helped a lot thank you.
Saved me a trip to the shop thank you!! 👌
your welcome
this helped me figure it out, mine didn't have a fuse but i just took it out and put the switch wires across a car batt' an kept contacting it until it started clicking lol
thanks bro you're a legend
Great video, thank you very much, thanks to it we fixed the quad bike.
your welcome don't forget to sub & check out other videos from my ch, plus just opened up the Join button that will allow you to see videos before they are avail to the rest of the public
This video was very helpful.
Thanks brother about to try this out!!
This was exactly my problem thanks man
Just found your video. Luckily i still had a spare fuse. The other 1 fuse is missing deym. Thanks. God bless and ride safe!
Im glad that this video is still helping out alot of riders save from a costly repair
Thanks alot for this 🙏🙏 ,,i was able to find that fuse ,i was confusing it with the other fuse on the outside before watching this video
your welcome glad I was able to help
thank you, you saved my bike and a lot of time and money
no problem glad i was able to help
Thank you so much man !! You saved my ass and my money 😂!!!
Thx Dude, you saved a visit to the mechanic and some hard earn money.!!
Fabulous! me too, "had nothing": "..very odd. Not even a "click!" ..But no one speaks of this same, days of searching ..until you! Working on a Mule fxt pro, w/ Key Ignition; ...toss in, I'm "A Total Beginner" such machines".. & misplaced manual". Your suggestion "Consider Starter >Fuses
your welcome glad i was able to help
So this what mechanics say when working on electrical to disconnect the negative first 🤔 smh great job 👏
You are a life saver !!!!!!!!
oh damn, first video ive seen with no dislike. props bro. Thanks for making a video like this
im always going to have some videos with dislikes, but those are the ones that rather see Chinese videos with cheesy music, something that would normally take time done in less then a min in the video & no explanation of what they are doing. the ones that give me the Likes are the ones that truly like that i explain what im doing to help guide them step by step to fix the issues. I'm not in it for the views I truly enjoy helping people out. The good will always out-way the bad.
@@ACProductions77 you’re the man. Subscribed!
Yo.....just like everyone else commenting you just saved my and my bikes life! Wow!
This was very helpful!! I think the starter relay fuse is my problem for my bike. I’m way more informed now on this.
This video saved me so much time Thsnk you
Just what I'm looking for thank you.
your welcome don't forget to sub and check out my other videos
Thank you maaan! You are a life saver!!!
your welcome glad i was able to help
FYI. CBR 500 R - had the same issue, no electrical power. Starter relay was good, battery was good and fuses were good. When I plug in the battery tender I can hear a high pitched sound. It was the voltage regulator. Now I’m waiting for it to come in the mail.
Same deal here. But mine keeps popping........
I watched your other video first hahaha I'll try to do that tomorrow thanks
didn't know there's even a fuse there .. but good to know ..👍
Hi I'm Collin Iv just bought a Honda lead scooter 100cc but it has no ignition power its the 2007 model
Worked perfect on my r6 thx
👍👍👍 Thanks you.. motor saya sudah hidup, dgn rm2 shj sudah selesai, on the way g kerja tiba2 mati. Thanks again..👍👍👍👍
saya gembira video ini dapat membantu anda
Superb video great information I haven't tried it yet but I'm getting ready to go down and try it right now same thing happened to my Aprilia 500cc turned it off went in the store nobody's in the store so I came right back out got only thing try to turn in wooden it wouldn't do nothing I just all of a sudden I couldn't figure it out with your help thank you I sure appreciate it cuz I don't know what to do next I hope it's I hope this is a problem this if it is I'm going to come get you again let you know that's what happened same exact thing happened to muscular thanks man
video soooo helpful keep doin what you doin
Thank u bro i face same problem , now i going to repaire
Thank you! Has the same issue and your advise helped! Respect💪
You’re welcome =)
Look at those wires and fuses.
This video was very helpful
Thank you ,,,I have same problem
This guy is lonely for conversation and just wants to hear himself talk. Fwd to the 6 min. mark
Exactly.
No kidding. Saved me a lot of time.
MAAAAAAAAAAN YOU AINT LYIN
thank you so much... i also thought that why would 30amp fuse blow so never checked that thank you
your welcome glad I was able to help
U made my day, ur video saved me a lot of stress today. Tnx
Great video man. Big help. Thanks
Brilliant helped me right out
Having the exact same problem with my rsv4 but the fuse is OK. Maybe need to replace the starter relay?
I did everything you did but, had to go an extra step (diff bike). It turns out the ignition switch when "turned" it didn't "make contact", so no power. Idk much about bikes but, I just followed the link, from battery, fuses, relay and lastly, the issue was at the switch.
What was wrong with the switch?? Mine is blowing the headlight fuse over and over again the moment I try to push the start button. It’s really frustrating me. Any help would be appreciated
@@busakiller1117 My switch when "turned" its supposed to "make contact" with another metal piece, so the energy flows. It was not making "contact" (had to put the small pieces together, then once it make contact, the rest would work. I came back to work on it another day, and I guess I "moved" something else, and now I need to figure that other part out.
But yours, it sounds like too much energy is going thru....every electric part (as I understand), is only able to handle so much "energy". If the fuse is blowing (preventing the headlight to blow up), its because too much energy is going thru. It seems you'd need to go backwards to find the issue. Good thing about TH-cam, there is videos for almost everything....may want to look at those where guys show how to test the current/energy. I don't have the knowledge but like most ppl, if there is time, I'd learn from others and try things out. But, I know how frustrating this can be. Good luck !
I've had similar problem with my zx9r,all lights work Inc lights on clocks ,but odometer and clock are blank!! And there's nothing when press starter button.
Could it be same 35 amp fuse,and if so ,could the blow with age
Mate, you just saved me 👍🏾
glad i was able to help out
is that rectangular gadget a temp sensor? I have one like that ... good video, thanks for the hints as I had==ve the same problem - I'll look for problem tomorrow ...
Renegade Carlos yes the rectangle is a ambient air temperature sensor look for it on my upcoming 5yr review video
great job !!!
Thank you so much
Helped me so much dude ur amazinf
thank you im very surprised on how many people have encountered the same problem but no one has shown how to fix it till i made my video I guess shops trying to keep it a secrete so they can make money off of us.
This video saved my ass thank you for posting
your very welcome
That’s crazy iv had the same problem for a week and couldn’t figure it out and that’s all it was😂
Thanks bro i am really appreciate
Wow thankyou bro ♥️
Thank you ! Thank You ! Thank You !
your welcome
That same thing happened to me, I was filing in traffic then suddenly the bike switched off, no power on the bike what so ever, idk what happened, the ignition was on bt the bike was dead, what do u think went wrong??? I have a 150cc scooter gy6
I'm glad I could see........
Thanks this is the problem with my motorcycle.
I have to wait till tomorrow to see if this is the problem. I ordered new relay. Battery giving 12.5 volts. As video stated, no power when key turned to on. Earlier it did turn on, I was getting 12.4 on fuse 1, and nothing on fuse 2. Though fuse 2 wasn't shorted (burned). Also was getting 12.4v on the relay prongs for plugin. I already have "non compatible" fuses. I'm not going to buy more that won't work. So i ordered the relay. I'd rather have a relay I know matches the type I need, than to guess at a fuse. I have 2, 30amp fuses. One new, One old. The old one, you can feel the friction as it goes into the slot. The new one doesn't. Therefore no conductivity. So, ordered new relay. If my lower 30A fuse wasn't giving any readings on power probe or multimeter, the replacement relay should fix it.
i see you have done some extensive testing to make sure on the issue
Thx man
In the event this bike hasn't burned to the ground yet, PLEASE have someone who knows what they are doing consolidate your wiring. You can even have a bigger (or second) fuse box installed to help clean things up, and make it easier to loom everything together. Also, what's with the stripped insulation on the 12V lead to your starter relay? It's worth it to clean everything up and do it the right way. Bikes might be toys, but they're expensive toys. Protect your investment.
I do have a video on how to consolidate your wires. I still have my R3 to this day and still works great.
Thanks !!!
How did I know ...then you said r3 lol
Good vid ima try on my Aprilia v4 my Kawasaki 300 is bulletproof but the aprilia didn’t turn on after I reconnect the battery the wrong way 😢
Thank you for the vedio
I have a 1998 Honda Foreman and I'm having this issue and we'll I bought a new selanoid with a 30 amp fuse the fuse blew and I never realized it thx
your welcome.
When i turn the key to the on position my bike has the same problem but if i leave it on, it will eventually turn on. Then when i start it, it will eventually turn off completely after idling for a little while. It will turn off faster if i give it a little rev. And then the key wont turn anything on again unless i wait.
bloody legend got it
How many reasons are there to not start the bike? Can u plz let me know
Lol what to do if the fuse blows as soon I try to start the bike ? Does it mean ,that bit is faulty and I need to change that piece ?
Mines the same way , did you find the problem ?
@@Pr0jectGloYT lol did you find the problem same thing
@@nihbih6756 yes I did ! So I brought my test light out and checked the power and ground coming from the switch .
GROUND HAD 12v ! I had a faulty ignition . Replaced it and problem went away .
Thanks brto
legend bro!
Thank you for your service 🫡
The proper fix for the problem I was trying to google lol you da man
I have a 1986 Magna V65 and have the same issue. However, the fuse keeps blowing every time I replace it and connect the connector. I know this means there is a short somewhere but I cant find it. The negative terminal cable that connects to the solenoid is fragile but nothing is touching the frame and nothing else is either. Any ideas of what it might be?
check for exposed wire or it could be that one of the pins in the connector is not seated all the way in. electrical is always tricky
So I’m having the same issue on my r1 but the fuses aren’t blown should I just get a new starter relay because I was riding when it just died
before you just buy another starter relay check out this video I just did on how to check if its bad & needs to be replaced>>th-cam.com/video/tS3_LxdCe2w/w-d-xo.html
O thanks, was driving me nuts
I am having this exact problem with a different stater solenoid, I've poked everything! Still have no power out of the ignition switch, I have constant power and good grounds to everything tho
have you checked the main wire harness connector to see if you have any burned wires?
@@ACProductions77 thank you for your reply, However, I ended up just buying a ep35 electronic flasher and cured the problem.
Do this work on scooters?