I like that thing they have moves the attachment up above the track bar box. I bought a Teraflex can't get it to fit interfering with that track bar box.
Thanks for viewing, I don’t know the exact torque, but this page might help you thanks. www.jeep392.com/threads/jeep-jl-common-bolt-nut-you-will-encounter-size-torque-specs-chart.2565/
Do you think a taller lift would put that sway bar closer to horizontal where it's supposed to be? I'm on 4" diesel springs in the front with half inch spacers and I believe my end links are either 12" in the front or 13", can't remember which.
@@JeepingMo I agree, great price on them. There's nothing out there at this price in this quality range. I was leaning towards the Synergy links but upon watching their installation video, the installer states that relocation brackets are required for Jeeps with more than 3.5" of lift. I'm just not interested in adding extra stuff like that. I have no sway bar brackets, no control arm brackets, no track bar brackets. Make it fit like factory or move on!
I just went to install mine, before I got too deep, I sized mine up also. They are WAY longer than my mopar 2inch bilstein reservoir lift kit sway bar links. Im worried about installing as this is my daily driver also
@@JeepingMo awesome! Really want to get these links for my JL but I have a 2in endurosport lift from Dynatrac so I’m 2in higher than stock rubi height and I’m scared these will be too long, what do you think since you’ve had them on? And is too long really that bad?
@@Chilly17 i had them on when i had a 2” spacer lift on. The sway bar was at a higher angle. You could always run a thread die down them and cut to the length you would like also. Thanks for viewing.
Are you still running these? How has it been with such a steep angle? What size lift do you have? I have a 2.5in lift but am at 3in of lift. Wondering if these will work for me. When I measure it seems like it will be a steep angle for me too.
These are actually my second set, the first set were ruined when the nut came off and ground the thread off of one of them. I trimmed those so the bar was horizontal but they were hard to get on. I run a 3 1/2 inch MetalCloak spring . They work good and for the price you really can’t beat them you can always trim them and run a die down them. Thanks for your good questions do you have any more please reach out, thanks for viewing and subscribing if you enjoy Fabrication we have a second channel as well.
I have been debating on the kit to go with. After seeing this I know the one I’m going with. Great video. Thank you sir.
Thanks. Glad you liked the video. I like the disconnects
Thanks for the video, I have a Wrangler JKU and will be putting these on this weekend.
You will like them. Thanks for viewing and commenting.
I like that thing they have moves the attachment up above the track bar box. I bought a Teraflex can't get it to fit interfering with that track bar box.
There are some nice disconnects out there, i like the simplicity of those.
I just prefer my pair! Thank you for the video!
Glad you liked it, they are a good value. Thanks for the support.
Just moved to Wentzville. Would love to go for a drive some time
Thanks for the comment, view and subscribing. Go out to our Facebook page and reach out to me, you never know. 👍👍
Southern Missouri here. I'll host if yall come
Great video .. actuality better than metalcloaks instructions! Do you know the torque specs.. i just installed today but can't fin torque info
Thanks for viewing, I don’t know the exact torque, but this page might help you thanks. www.jeep392.com/threads/jeep-jl-common-bolt-nut-you-will-encounter-size-torque-specs-chart.2565/
Do you think a taller lift would put that sway bar closer to horizontal where it's supposed to be? I'm on 4" diesel springs in the front with half inch spacers and I believe my end links are either 12" in the front or 13", can't remember which.
It should, the links can always be cut and re threaded. For the price they are a great value.
@@JeepingMo I agree, great price on them. There's nothing out there at this price in this quality range. I was leaning towards the Synergy links but upon watching their installation video, the installer states that relocation brackets are required for Jeeps with more than 3.5" of lift. I'm just not interested in adding extra stuff like that. I have no sway bar brackets, no control arm brackets, no track bar brackets. Make it fit like factory or move on!
Thanks!
I just went to install mine, before I got too deep, I sized mine up also. They are WAY longer than my mopar 2inch bilstein reservoir lift kit sway bar links. Im worried about installing as this is my daily driver also
They are definitely longer. I don’t have any issues
Thanks for the Vid. Do you know how adjustable they come from factory? I'm looking for min/max lengths. tnx
It depends on model of Jeep. The ends have roughly a 1/2 adjustment. Thanks for the question and comment.
How much of a lift do you have?
3 1/2 metal cloak. Thanks for viewing.
@@JeepingMo awesome! Really want to get these links for my JL but I have a 2in endurosport lift from Dynatrac so I’m 2in higher than stock rubi height and I’m scared these will be too long, what do you think since you’ve had them on? And is too long really that bad?
@@Chilly17 i had them on when i had a 2” spacer lift on. The sway bar was at a higher angle. You could always run a thread die down them and cut to the length you would like also. Thanks for viewing.
@@JeepingMo was there any difference with a higher angle? People are saying a high angle doesn’t affect much
Are you still running these? How has it been with such a steep angle? What size lift do you have? I have a 2.5in lift but am at 3in of lift. Wondering if these will work for me. When I measure it seems like it will be a steep angle for me too.
These are actually my second set, the first set were ruined when the nut came off and ground the thread off of one of them. I trimmed those so the bar was horizontal but they were hard to get on. I run a 3 1/2 inch MetalCloak spring . They work good and for the price you really can’t beat them you can always trim them and run a die down them. Thanks for your good questions do you have any more please reach out, thanks for viewing and subscribing if you enjoy Fabrication we have a second channel as well.
I used it one time and the pins fell off . Lost both of them today. They suck
Sort of sad to see the Kamala ads begging money on your video.
@@davidmenough7501 unfortunately creators have no control over that.