How To Use TSRETE S12: Complete Guide including Assembly, Setup and Tips
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2023
- If you’re new to the TSRETE S12 then this how to use TSRETE S12 breast pump guide is for you!
In this video I am going to walk you through every step of using the TSRETE breast pump, from the different parts to assembly to the controls, so you can use your TSRETE pump with confidence.
BUY YOUR PUMP HERE: amzn.to/3ZZbiIz (#ad)
Whether you’re new to the TSRETE wearable breast pump or are a long-time user that is looking to improve your pumping experience with tips and tricks, this guide on how to use TSRETE wearable pump is your key to unlocking a stress-free and successful pumping experience with the TSRETE S12.
✨D I S C O U N T S ✨
Check out my exclusive pump discounts here:
➡️ pumpingmilk.com/discounts/
FTC: I receive a small commission from the product links above. I appreciate your support! This is not a sponsored video. All opinions are my own.
#tsrete #tsretes12 #tsretereview #tsretepump #pumpingmilk #breastfeeding
This was so helpful thank you so much!
Thanks so much for the feedback! So glad it was helpful!
This was helpful
So glad to hear! Thanks for the feedback - always appreciated!
Thank you!
❤❤❤
Do you know what the rings are for that came in the bag with the extra flanges?
Great question!! I actually didn't get any spare rings in my kit, but my best guess (depending on the size) is that they fit around the base of the pump motor (the part that connects to the collection cup). I can see there is a silicone ring there to help ensure a tight fit. If your pump motor starts to loosen this is when you could replace the ring.
Thank you
Can I put the pump parts in the baby brezza sterilizer?
The TSRETE manual says 'Please use hot water/steam/sterilization pot for sterilization, temperature not exceed 100 degrees.' So, yes, I'd assume that this was safe as the baby Breeza sterilizer produces steam at 212°F / 100°C.
Recently bought this pump and both of the motors have a L on them on the bottom where it clips onto the pump. Does yours have that too? I was thinking I was suppose to have a L and R for left and right boob? Just curious!!!
Great question! I just took a look and yes, both the motors on my pump have the L on the bottom. I assume this is more to do with a quality check of some sorts? There is no left or right side for the TSRETE and it can be used as a single or dual pump. Normally with a wearable breast pump the left or right side is to do with monitoring and tracking your milk production via an app like the Willow pumps opposed to left and right side for functionality.
How long do I need to charge them initially?
I recommend fully charging it before your first use, which will take 2.5 to 3 hours 😊
How can I tell my nipple size and what size is the tsrete I should get?
To measure your nipple size, take a ruler or a measuring tape and measure your nipple from the base of one side to the other. Don't include the areola. This will give you your flange size. The Tsrete comes with a standard 24mm and 21mm flange, so depending on your nipple size you may need to also purchase a flange insert like these ones amzn.to/3Vapqhq (#ad)
I've just published this video if that helps :) th-cam.com/video/GsAER6DPElg/w-d-xo.html
Does yours leak by any chance. My partner just got these and one is leaking whilst she pumps
No, it shouldn't leak if you have it assembled correctly. How frustrating for her!
If it is just 1 leaking, I would contact the manufacturer and ask for a replacement/replacement part depending where it is leaking from.
@ProudHappyMama thank you so much for yer reply. ❤️ we have contacted the manufacturer and asked about replacement parts. Thanks again.
@warrioromarzthefirst5949 glad I could help! And hopefully they get it sorted asap for you ❤