HOW TO REMOVE 99-06 SIlverado Tahoe Suburban HEAD LIGHT GRILLE & FRONT BUMPER
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- In this video I show you how to easily remove the grille, head lights, turn signals, and front bumper for 1999 2000 2001 2002 Silverado and 2000 2001 2002 2003 2004 2005 2006 Chevy Tahoe and Suburban. For the GMC Sierra and Yukon the process will be almost identical. To re-install follow these steps in reverse.
Subscribe to this channel for more HOW TO videos for the GMT-800 body style Silverado Sierra Tahoe Yukon and Suburban!
No BS, no other talking. Straight to business. I approve
3:22 look at all that blinker fluid! Great video
could you make the next vid when its darker out. I can see better in the dark.
Thanks. Great video. Take care.
Thanks for taking the time to demonstrate this procedure. It was very helpful.
Just what I needed. I'm going to replace a dented bumper on a 2001 Tahoe and your video was a big help. Thank you.
Good details and to the point so that was good! But it would have been nice to see what you where doing! Just saying.
Yesssssss
Same thing I was thinking
Nice vid, just had to use my night vision goggles
Thanks for the concise and useful video. Replacing 01 headlamps and bumper lamps.
Putting billet grilles in, thanks for the straight forward video
Good information
Thanks
Good videos
Keep it up
Straight forward, good info, but please next time have the light shining on to the area you're working, not behind the truck.
I’m new to my own car and the only reason I want to do some work on it is cause I just hit s deer in my truck and broke the grill and one headlight. Thank for showing how to take it apart. Do you have any recommendations for aftermarket grills and headlights?
Hi Curtis, glad this helped you! As far as parts I always recommend using GM / AC Delco factory OEM parts especially the headlights as the aftermarket stuff is so hit or miss and doesn't seem to hold up over time. On the grille you might be able to get a good aftermarket one but I would check for online reviews of the part before purchasing. Best thing to do would be to watch craigslist or Facebook marketplace and find a good condition used grille off someone parting one of these trucks out. They sell used in good shape for around $50. Hope this helps.
Thanks for the video, now I know how to raise the defense of my Silverado
Great video thanks
15mm impact, extension, pry bar, 10mm impact, screwdriver
Good video. Like the red vette in the background.
THANK YOU
Thanks for the video. Very helpful. 👍🏻
Great video....What is the triangular aluminum bracket, in front of the radiator (also holds the hood latch) called? The Power steering cooler is attached to it on the driver side. Anyone? I need to replace it and don't know what NAPA, Amazon or Advance Auto calls it so I can order it. Thanks in advance
Kinda dark but understandable 👍
I have the fog lamps inside the bumper. I want to replace them. Can I remove the top plastic trim to gain access to the two screws holding them in place? Thanks for the help and great video.
You should be able to access the back of the fog light housings pretty easily.by crawling under from the front and reaching up
I know you in Texas. Them damn locust!
Thank you!
Is good video. Thanks
Anyone know where i can buy the grill retainer clips for 99-02 silverado
Can the plastics that attached to the bumper be painted ? If so what type of paint?
Thanks for trying
Question: the push pins, do you have a source ?
Thanks
Cool. We are looking for CHEVY OWNER to tes`t our fog lights. Are you interested?
Know this is an older video but do you know where I can buy the hardware?
We got the same vehicles
I got trans am
Silverado
Craftsman tractor
99 old style video for 2000 up
I was the 1k like
How did you take the bottom pieces off of the grille, I’m having trouble with that
there are 2 twist locks at the bottom and 2 at the top. Watch where I used the phillips screw driver as that's how your disengage them.
Why are you doing this in the dark? You have a well lit shop right behind you.
Should have been better at midnight to make video😂
Is it possible to change a 2002 gmc sierra grill and frot end into a Chevy grill and front end?
Yes but you will need the entire front clip sheet metal as in hood, both fenders, head light brackets and bumper. The under pinnings like the inner fenders and core support are interchangeable and work the same for both GMC and Chevy. The only problem that you may encounter is the frame horn ends where the front bumper attaches. You may need to rig/weld on some brackets to get the Chevy bumper to fully mount up as the mounting points on those frame ends can be different between Chevy and GMC and also 99-02 vs. 03-06. best way is to crawl under and do a visual comparison. It can be done and I'm sure theres a mounting kit already made somewhere on the internet.
Gently remove grill so you don’t break it (bangs on hood) lol
Ty for video, but I couldn't see as well as I would have liked.
Could’ve shown what you were taking off
Cicadas! Must be Indiana!
I had all the tools up to a 10mm 😔
….You definitely needed better camera angles and a sh*t ton of additional lighting. What good is the video if the viewers cannot see what you are really doing??? …Hell, the clearest part of the video is at the end inside the well lit garage… probably would’ve been a good idea to start there… just saying!
The video is dark
Really?!?!? The best part of the video was the vet
Did your wife kick you out of the lighted garage could not see any thing you were doing. I GUESS SHE DIDN'T WANT YOU SMACKING PARTS ON HER VET!
doesnt come off that easy,its stuck,make a video thatts real
Simple and straight forward , watched this on the way to a welders house cuz I was doing HD front end and I got everything off w ease🦾