When I saw how tiny the area really was at the end, you called it a mess but I call it a masterpiece. It all looks so big on the close up I forget that it's zoomed in that far. Amazing work, I hope the customer was happy and it functioned again.
Ask the customer to take a picture and send it to you before the quote if they can. If not or they refuse, charge extra. This is the 21'st century. If they can text their Boss to have a sick day, they can send you over a photo of the damage! Anyway, full respect to you for finishing this abomination of a home repair.
I tried such repair only with heat gun I said there Is no way I will fix it cause I dont have even microsoldering station I have very stable hands etc but still no equipment well my point is if I fixed it I would have workin console for 15$ the cost of the heat gun if not then I go to ps5 well I messed up and I lost even one of the capacitors in the board next to hdmi but I cant imagine how a guy can rip soldering pads I work with phone repairs etc and never encountered broken pads he did good job on breaking them
@@HeLrAiSiNg1 have you ever heard of punctuation? well, what more do i expect from someone who attempted MICRO SOLDERING WORK armed with nothing but a heat gun....
I had a record of 10 jumpers on this same model of board. It took me 3 weeks to figure out where to run the jumpers! I wish I had this video then, it’s definitely saved for next time!
@@tony001212 Dosent mean you cannot get them in some sort of Reddit forum. Someone somewhere has dealt with this before. There is a wealth of home brewed info on these things online.
@baz watts I see value in the knowing if somebody else can repair what was mangled. Perhaps because I seek after Christ, as I have done quite a botched job of it many times.
I've done a fair bit of "blue wire" work, and it's always time consuming. I wish there had been videos like this when I learned how, you are providing a great educational service to future repair techs.
I am SUPER impressed by this, and someone already said but we were all thinking it already. Not many other techs would have even attempted to repair that hot mess of a dumpster fire.
Nice touch with the music background. After seeing this, I'm thinking about asking for photos when I hear they attempted to repair. And I thought the board from Jamaica was bad. This is why I call you the surgeon. Great patience. Great repair.
i watch a bunch of you newer videos and love them and think you are a very talented person in this trade... but after watching this video you have blown my mind on how good you are at fixing these items...you are a modern day badass my friend!! keep up the great work!!
Omg, why do people think they are microsoldering specialists. This boards chance of working is still good, but only because it's in the hands on a specialist. Good luck sir on this repair.
This deserved my like. I would never try to do that, that's mad soldering skills right there, closest I would've done is scrape what's left of the trace and jump from there.
What an amazing repair!!! if you look under the microscope you make it look easy but at the end if you see how small this all is... just amazing what skills you have.
On the PS4 I see repair shops do this all the on hdmi port repair, even experienced people that do microsoldering. The reason is the very thick ground plane and thick multi layer board. Trick is you have to use a preheater under and then hot air the top side and hdmi port will come out without lifting traces.
You should get them to send in photos of both sides of the boards in these cases. You would at least have a chance of quoting a realistic price for your time.
man right when he starts cleaning and the music is going its so satisfying to watch that mess get cleaned right up by his hands to the music love the quality of your work but i must say the quality of you videos is awesome as well it really conveys the felling you must get when cleaning this mess of a board because i feel it as well :)
I'm so impressed that you guys actually work on customer attempts. Where I work we vehemently deny anything thats been attempted by the customer because of this. Our company has a fixed or no charge policy and so many people bring laptops that look like they've been through a shredder for us to fix. If they don't tell us they've worked on it we'll spend hours trying, fail, and not charge them. Such a waste!
Absolutely amazing. The fact you kept your price, still went for the repair, I mean... if that isn’t the biggest symbol of passion for your work and above and beyond service, I don’t know what is. Speaking of passion though- where did you acquire the skillset to do this? Self-taught with tons of experience or do you have an EE degree?
I have an EE degree. If I attempted this job, it’d probably end up like the customer’s job :^). University is great for learning about theory, electrical design, reasoning, etc. - but not really for hands-on skills like this. At least in my experience
@@playdo93 totally. I come from the other end, I’m a self-taught guy... but I always wonder if the concepts from formal EE training could fill gaps in understanding that self-teaching may miss.
I have come to two ... no... three conclusions watching your videos. 1. Get a bunch of scrap boards and practice, practice, practice. 2. Once I set up a device, stop pulling plugs. The plugs seem to be the weak points 3. If I have a device that I really want fixed right, send it to you
Thats not a repair, thats a refurbishment. A true master of your craft. Id find an acrylic case for that badboy. I sure hope the customer tipped well...
Lol modern Alex would nope this so fast. Even though his tools are much better and more experience and everything too. This IS a nightmare title was right.
@@reacey some hdmi traces need to be the same length because of the differential pairs based on the spec and I’m sure there max are trace length requirements
It's honestly ridiculous how many people ask about the wires touching when he mentions in the video that they're insulated. Not to mention the fact that every other comment asking this has been answered by either him or someone else. *facepalm* EDIT: Typo >_>
I was about to say about the solder mask because there are a lot of wires there and with solder mask it will stay in place but you read my mind on the end of the video :)
Nice videos! I recently found your channel and it got me hooked. Did this actually work properly? I mean those are high speed HDMI data lines so I guess they originally had to be impedance matched?
Spaghetti Monster! That's very intense work love all these videos it's like a treasure trove of knowledge presented in a very easy to understand how this works. Can't wait to start doing this kind of work.
I enjoyed watching the video but you should have explained or mentioned how you found where the pins on the hdmi port connect to. I’ve briefly explained in some posts how you could have approached this problem, but a lot of people would have found this interesting.
I just repaired a PS4, I'm not a professional, but do electronics as a hobby (have decent microscope etc), was given it by a friend who has bought a replacement, just to have a play. Every single pad was ripped off. I basically did what you did for every pin, but only bothered with the pin 2 ground, leaving 5, 8, 11 and 17 not connected. I've checked with a cut hdmi cord that every pin is connected as it should be (pins 1, 2, 3, 4, 6, 7, 9, 10, 12, 13, 15, 18, 19) and that they are not shorting against each other etc. The PS4 now works fine, had it on for hours, picture is 100% fine. However, I have a Sony TV with 4 HDMI ports and my sky box plugged in. I have the HDMI control turned on on the sky box and usually if I press a button on my sky remote, it turns on both the Sky box and the TV. But when the PS4 hdmi is plugged in, regardless of whether it's on or not, turning on my Sky box doesn't automatically turn on the TV (or change input device), as soon as I unplug the PS4 HDMI the tv works as expected. Any ideas what's missing/wrong please? It makes no difference whether I enable or disable the PS4 "Enable HDMI device link" Thanks
Excellent video. Must of taken a lot of patience. This is a dumb question... but what wire are you using? And why doesn't it matter that the wires are touching? At 16:40 you mentioned right at the end the wire was insulted - so guessing that's why they can touch, but I didn't see any insulation?
Im from Phillipines i always watching you. Your so awesome when you solve the problem keep it up sir im watching your video tutorial and try it in actual i learn lots
really great repair. I'm no expert but I would have done the signalling pairs first which were the closest to do to keep them side by side and as short as possible
Very nice, i've recently buyed a notebook with the same problem on one ram socket. Since i had another broken one i tryed some repair, but as result i definitively broke also the other 😤
The ps4 hard drive is formatted so you pretty much lose your data if it isn't back in the original system (without recovery software). New system will wipe it. So understandable that customer wants this particular system fixed if he has game clips on the HD. Good on you for honoring the estimate.
We have a place in Birmingham (UK) that has an interchange of roads commonly referred to as the spaghetti junction !!! Your repair looks more complicated than this.
I know its a much older video, it came up as a recommended video to watch - did this work? Did you get feedback from the customer to say if it was successful or not it looked like a bit of a hard fix - and very impressed if it did work
Паять умеете (ещё бы с таким то оборудованием), но так запутать дорожки в коротком обрыве это надо ещё постараться, даже у меня с моим дерьмовым инструментом получилось бы лучше, а вообще молодцы что взялись и сделали по факту главное результат)) 👍
Thing that most people who are new to soldering don't understand. Is how big of a difference a good soldering iron makes. It actually can be a little bit of a trap really for the inexperienced because most of the motivation I think is from wanting to save money by doing the work yourself. Parts are a few cents soldering iron is like 6 bucks and the guy in the video stuck the part on in like 2 seconds how hard could it be? Unfortunately what isn't obvious is that that the radio shack special soldering iron is only really good for soldering wires together and more often than not will end up destroying the circuit board your working on. When it comes to soldering the right tools and supplies make a massive difference.
Practice. Practice. Practice. I have a nintendo switch that needs a new usb port. I am going to do it myself but first I have a bunch of old boards I pracrice removing and reinstalling stuff on. Once I get good at that then I will attempt the repair. Like you always say. It looks easier than it is.
Hi there and THANKS for the video!! You have inspired me to do the same because I got a free tv that the HDMI was kinda ripped out so there was about 5 good pads out of 19. So decided to order an HDMI connector and .34awg magnet wire. I got the same tip as you do but I wonder at what temperature do you have it on?? On the video your soldering of this very thin looks so easy to solder on, for me it takes time to be able to solder the wire to a pad or a place that I have scratched to solder on. Any advice on temperature and to make this thin wire solder on pads and scratched self made pad. THANKS!!!
Ok did the fix and it WORKS!!! THANK you very much for your video!!! I did a triple check with meter just to make sure no shorts!! So no land fill for this tv!!!
Hello i am an old subscriber i've watched all your videos and i have 1 qyestion. It really needs all the ground lines to be connected or is just for ethics. Thank you and keep going :D
The ground pins are your reference zero voltage pins for the signal voltages. Without the ground pins connected it won’t work properly. Ground also serves as a return path for the electrons
I need to do this on my Xbox series x, because during a simple HDMI port replace(I bought a broken console), the heat got too extreme and obliterated the wires on the board..I don't even know if I can fix it, but seeing you pull this off gives me hope.
When I saw how tiny the area really was at the end, you called it a mess but I call it a masterpiece. It all looks so big on the close up I forget that it's zoomed in that far. Amazing work, I hope the customer was happy and it functioned again.
Looks like the customer tried to use a lighter and a 4 inch nail as a soldering iron.
Yep
Legend has it he did. 😉
🤣🤣🤣🤣🤣🤣
after watching 5 minute craft
LOL
Ask the customer to take a picture and send it to you before the quote if they can. If not or they refuse, charge extra. This is the 21'st century. If they can text their Boss to have a sick day, they can send you over a photo of the damage! Anyway, full respect to you for finishing this abomination of a home repair.
I tried such repair only with heat gun I said there Is no way I will fix it cause I dont have even microsoldering station I have very stable hands etc but still no equipment well my point is if I fixed it I would have workin console for 15$ the cost of the heat gun if not then I go to ps5 well I messed up and I lost even one of the capacitors in the board next to hdmi but I cant imagine how a guy can rip soldering pads I work with phone repairs etc and never encountered broken pads he did good job on breaking them
I was thinking the same
@@HeLrAiSiNg1 goodness please use punctuations next time my dude
@@HeLrAiSiNg1 try putting a period in your sentences
@@HeLrAiSiNg1 have you ever heard of punctuation? well, what more do i expect from someone who attempted MICRO SOLDERING WORK armed with nothing but a heat gun....
I had a record of 10 jumpers on this same model of board. It took me 3 weeks to figure out where to run the jumpers! I wish I had this video then, it’s definitely saved for next time!
You can get the schematics. After that it's easy.
@@socialengineer1441 sony does not provide squematics for fixing purposes, remember, they're bether if you buy another one.
@@tony001212 Dosent mean you cannot get them in some sort of Reddit forum. Someone somewhere has dealt with this before. There is a wealth of home brewed info on these things online.
@@stephenhood2948 "Cross your fingers and hope someone has done the hard work for you"
It's really not that hard to use a multimeter.
Not many techs would attempt that. Which ever way you do it, it always looks awful.
:)
@@Millzieeeee what's this FB group called?
Never done one that messed up but I’ve done several with 5 or so pads missing.
Don’t matter what it looks like long as it works!
Who else wanna see if it works or not?
No complaint from customer means it worked.
@baz watts I see value in the knowing if somebody else can repair what was mangled. Perhaps because I seek after Christ, as I have done quite a botched job of it many times.
@@cybermaus the work wasnt warranted, so no point in the customer informing alex if the repair worked or failed.
wait... so the board was repaired but not tested? Did the customer just send the board, no rest of the playstation?
@@tony359 YES, he speak in video about that
I've done a fair bit of "blue wire" work, and it's always time consuming. I wish there had been videos like this when I learned how, you are providing a great educational service to future repair techs.
There's no way this was worth your time! You definitely love what you do. Great work!
I am SUPER impressed by this, and someone already said but we were all thinking it already. Not many other techs would have even attempted to repair that hot mess of a dumpster fire.
Nice touch with the music background. After seeing this, I'm thinking about asking for photos when I hear they attempted to repair. And I thought the board from Jamaica was bad. This is why I call you the surgeon. Great patience. Great repair.
Someone tried their best to ruin the pads on the board and you still attempted to fix that. Respect+
A whole lot of mess because someone thought that he was the soldering king, amazing job 👋👋👋👋👋
i watch a bunch of you newer videos and love them and think you are a very talented person in this trade... but after watching this video you have blown my mind on how good you are at fixing these items...you are a modern day badass my friend!! keep up the great work!!
Omg, why do people think they are microsoldering specialists. This boards chance of working is still good, but only because it's in the hands on a specialist. Good luck sir on this repair.
This deserved my like. I would never try to do that, that's mad soldering skills right there, closest I would've done is scrape what's left of the trace and jump from there.
What an amazing repair!!! if you look under the microscope you make it look easy but at the end if you see how small this all is... just amazing what skills you have.
On the PS4 I see repair shops do this all the on hdmi port repair, even experienced people that do microsoldering. The reason is the very thick ground plane and thick multi layer board. Trick is you have to use a preheater under and then hot air the top side and hdmi port will come out without lifting traces.
You should get them to send in photos of both sides of the boards in these cases. You would at least have a chance of quoting a realistic price for your time.
man right when he starts cleaning and the music is going its so satisfying to watch that mess get cleaned right up by his hands to the music love the quality of your work but i must say the quality of you videos is awesome as well it really conveys the felling you must get when cleaning this mess of a board because i feel it as well :)
They sent you over an absolute Hiroshima. Mad respect for the patience and repair skills.
True necromancy here!! Great job Alex, that board looked damaged far beyond repair.
You deserve an award for this patience
very impressive, love your professionality. thank you for sharing!
I'm so impressed that you guys actually work on customer attempts. Where I work we vehemently deny anything thats been attempted by the customer because of this. Our company has a fixed or no charge policy and so many people bring laptops that look like they've been through a shredder for us to fix. If they don't tell us they've worked on it we'll spend hours trying, fail, and not charge them. Such a waste!
This is what i like. Reconstructing or making jumpers especially when the pcb is damaged.. great work sir!
Absolutely amazing. The fact you kept your price, still went for the repair, I mean... if that isn’t the biggest symbol of passion for your work and above and beyond service, I don’t know what is.
Speaking of passion though- where did you acquire the skillset to do this? Self-taught with tons of experience or do you have an EE degree?
I have an EE degree. If I attempted this job, it’d probably end up like the customer’s job :^).
University is great for learning about theory, electrical design, reasoning, etc. - but not really for hands-on skills like this. At least in my experience
@@playdo93 totally. I come from the other end, I’m a self-taught guy... but I always wonder if the concepts from formal EE training could fill gaps in understanding that self-teaching may miss.
My god you are truly an inspiration sir! Hope you and Big Boss are doing great! Greetings from Sweden
Jeeeeeez!!! I would of binned that!
3, 4 or 5 jump wires yes but not the whole port 😂
Good job regardless
Not the whole port, just 99.9 percent of it XD
Would have*
Nice that you gave it a try. Please let us know the customer satisfaction.
How do you keep those wires from shorting out to each other?
Ps. I heard him say they were insulated towards the end of the video..
Ya. You can see him burning off the insulation at the ends of each wire to prepare it for soldering.
Wires have a epoxy type coating, same wires in electric motors.
congratulations, surgeon's job !!!
I have come to two ... no... three conclusions watching your videos.
1. Get a bunch of scrap boards and practice, practice, practice.
2. Once I set up a device, stop pulling plugs. The plugs seem to be the weak points
3. If I have a device that I really want fixed right, send it to you
The pads looked like they got deleted out of the board entirely. Im a new subscriber and love what you do
Thats not a repair, thats a refurbishment. A true master of your craft.
Id find an acrylic case for that badboy. I sure hope the customer tipped well...
I would’ve turned the customer away. It’s not impossible, but running that many jumpers for 100$ is just too much.
Also - risky !!
Lol modern Alex would nope this so fast. Even though his tools are much better and more experience and everything too. This IS a nightmare title was right.
True
I would have sent it back. Great effort!
RIP track length tolerance
@@reacey some hdmi traces need to be the same length because of the differential pairs based on the spec and I’m sure there max are trace length requirements
Also, I am only half way through this video, all I have to say is, you're a madman genius!!!
You are such a virtuoso. It's inspiring to see you working.
Some of those traces looked like balanced or transmission lines....I guess routing and path length matching not critical.
It's honestly ridiculous how many people ask about the wires touching when he mentions in the video that they're insulated.
Not to mention the fact that every other comment asking this has been answered by either him or someone else. *facepalm*
EDIT: Typo >_>
Its called enamel insulation, not insulted :D
@@thehitman5007 insulated*
Good catch lol.
I was about to say about the solder mask because there are a lot of wires there and with solder mask it will stay in place but you read my mind on the end of the video :)
Northridge, o milagreiro, the king. 🙏🏻❤️
A Man of few words and many wires.
I like it.
This is a nightmare…
Nice work!
😎😎you really master of repair
God bless this hands bro you tha man
Wow you did an amazing job on such a tiny spot
You are a very hard working professional sir
Did it work? Thats alot of patience and would be a big reward at the end...
Nice videos! I recently found your channel and it got me hooked. Did this actually work properly? I mean those are high speed HDMI data lines so I guess they originally had to be impedance matched?
Spaghetti Monster! That's very intense work love all these videos it's like a treasure trove of knowledge presented in a very easy to understand how this works. Can't wait to start doing this kind of work.
I enjoyed watching the video but you should have explained or mentioned how you found where the pins on the hdmi port connect to. I’ve briefly explained in some posts how you could have approached this problem, but a lot of people would have found this interesting.
Happy New Year to you and your family I am a new supporter I found you a video today and I supporting your Channel
That was a micro surgery on some multi octopus tentacles.
I just repaired a PS4, I'm not a professional, but do electronics as a hobby (have decent microscope etc), was given it by a friend who has bought a replacement, just to have a play. Every single pad was ripped off. I basically did what you did for every pin, but only bothered with the pin 2 ground, leaving 5, 8, 11 and 17 not connected.
I've checked with a cut hdmi cord that every pin is connected as it should be (pins 1, 2, 3, 4, 6, 7, 9, 10, 12, 13, 15, 18, 19) and that they are not shorting against each other etc.
The PS4 now works fine, had it on for hours, picture is 100% fine.
However, I have a Sony TV with 4 HDMI ports and my sky box plugged in. I have the HDMI control turned on on the sky box and usually if I press a button on my sky remote, it turns on both the Sky box and the TV. But when the PS4 hdmi is plugged in, regardless of whether it's on or not, turning on my Sky box doesn't automatically turn on the TV (or change input device), as soon as I unplug the PS4 HDMI the tv works as expected. Any ideas what's missing/wrong please?
It makes no difference whether I enable or disable the PS4 "Enable HDMI device link"
Thanks
Excellent video. Must of taken a lot of patience. This is a dumb question... but what wire are you using? And why doesn't it matter that the wires are touching? At 16:40 you mentioned right at the end the wire was insulted - so guessing that's why they can touch, but I didn't see any insulation?
@@danielsatko- didn't realise it was transformer wire. Didn't know transformer wire was used for solder trace repairs. Cheers for the heads up! :)
You really need some magnification tool huh! just a newbie here! probably I need to buy one
"a few missing pads" lmfao that is an understatement at best.... deceptive, i would say
What a nightmare, I would be ashamed to sent something in this condition to any repair shop
Look at that spider nest of wires great job!
Bet you wish you had pen grinder and pad repair kits :)
Amazing job bro!
That is brilliant work sir. Did it work for the customer?
That is also my question 😁
Im from Phillipines i always watching you. Your so awesome when you solve the problem keep it up sir im watching your video tutorial and try it in actual i learn lots
interstellar's docking
vs
N.fix's jumping wires
its not possibles but its necessary.
WOW, very good work!!! I have a Question. Is it not a problem that the wires are touching each other?
Wires are insulated as mentioned in the video. 16:36
@@NorthridgeFix Ah ok, thanks for your answer!
Maybe noise but I doubt if it will be of any significance
@@Hadadoh They are "enameled" (coated with enamel/clear coat paint)
@@Johnathan_Waters sure I get it. Thanks
Damn, you are an artist
really great repair. I'm no expert but I would have done the signalling pairs first which were the closest to do to keep them side by side and as short as possible
Holy moly, that's alot of jumper!
Prior repair attempt... it looks like the customer smashed it with a chisel and Thor's hammer!
Nice repair hard work!
What wire are you using?
King so hard work! Respect
Very nice, i've recently buyed a notebook with the same problem on one ram socket. Since i had another broken one i tryed some repair, but as result i definitively broke also the other 😤
The ps4 hard drive is formatted so you pretty much lose your data if it isn't back in the original system (without recovery software). New system will wipe it. So understandable that customer wants this particular system fixed if he has game clips on the HD. Good on you for honoring the estimate.
What kind of wire do you use? Is it insulated? Brilliant work by the way.
yes insulated
rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F40-AWG-Gauge-Enameled-Copper-Magnet-Wire-2-oz-4152-Length-0-0034-155C-Natural%2F322231509251%3Fepid%3D1380697764%26hash%3Ditem4b067ea103%3Ag%3AiZYAAOSwgQ9Vw7C2&campid=5338440312&toolid=20008
I just saw the video and i was woudering the same..
Master at his work. Super job 👍
Absolute nightmare!
Good video
High Level Repair, respect 👍👍👍
We have a place in Birmingham (UK) that has an interchange of roads commonly referred to as the spaghetti junction !!! Your repair looks more complicated than this.
Haha! We also have an interchange in Atlanta Georgia USA known as Spaghetti Junction and I was thinking the same thing.
I know its a much older video, it came up as a recommended video to watch - did this work? Did you get feedback from the customer to say if it was successful or not it looked like a bit of a hard fix - and very impressed if it did work
Паять умеете (ещё бы с таким то оборудованием), но так запутать дорожки в коротком обрыве это надо ещё постараться, даже у меня с моим дерьмовым инструментом получилось бы лучше, а вообще молодцы что взялись и сделали по факту главное результат)) 👍
nice one, I saw electronic surgeon ! reminds me of soldering tv fibre..no bonding machine,
Did it work at the end? Some follow ups would be nice
Thing that most people who are new to soldering don't understand. Is how big of a difference a good soldering iron makes. It actually can be a little bit of a trap really for the inexperienced because most of the motivation I think is from wanting to save money by doing the work yourself. Parts are a few cents soldering iron is like 6 bucks and the guy in the video stuck the part on in like 2 seconds how hard could it be? Unfortunately what isn't obvious is that that the radio shack special soldering iron is only really good for soldering wires together and more often than not will end up destroying the circuit board your working on. When it comes to soldering the right tools and supplies make a massive difference.
Also I would like to add skills are important as well but the right tools give you a fighting chance to get the skills.
Nice video! What thickness copper wire did you use?
I did that in 10 $ your price blowed my mind unfortunately our work is hidden from eyes so people think it's just a piece of cake...
Practice. Practice. Practice. I have a nintendo switch that needs a new usb port. I am going to do it myself but first I have a bunch of old boards I pracrice removing and reinstalling stuff on. Once I get good at that then I will attempt the repair. Like you always say. It looks easier than it is.
SpiderMan, SpiderMan. What are you sodering, SpiderMan?!
and my local repair shop cant even solder hdmi port for a tv .... so sad :(
better than factory? :) Awesome job Alex.
You added silicon over everything at the end?
Hi there and THANKS for the video!! You have inspired me to do the same because I got a free tv that the HDMI was kinda ripped out so there was about 5 good pads out of 19. So decided to order an HDMI connector and .34awg magnet wire. I got the same tip as you do but I wonder at what temperature do you have it on?? On the video your soldering of this very thin looks so easy to solder on, for me it takes time to be able to solder the wire to a pad or a place that I have scratched to solder on. Any advice on temperature and to make this thin wire solder on pads and scratched self made pad. THANKS!!!
Ok did the fix and it WORKS!!! THANK you very much for your video!!! I did a triple check with meter just to make sure no shorts!! So no land fill for this tv!!!
@@Sisko125 What temperature and what soldering tip did you use?
WTF..looked like worms on Circuit board...lol.. good Work..
Little Johnny finds his dad’s soldering iron and thinks he can fix it himself…. lol 😂
Hello i am an old subscriber i've watched all your videos and i have 1 qyestion. It really needs all the ground lines to be connected or is just for ethics. Thank you and keep going :D
I think all the ground lines should be soldered
The ground pins are your reference zero voltage pins for the signal voltages. Without the ground pins connected it won’t work properly. Ground also serves as a return path for the electrons
A lot of respect 👍
I need to do this on my Xbox series x, because during a simple HDMI port replace(I bought a broken console), the heat got too extreme and obliterated the wires on the board..I don't even know if I can fix it, but seeing you pull this off gives me hope.