Hello Alex, I would really enjoy a mini series of Big Boss showing how to open up devices, specifically the ones you are not supposed to get open. I do have sprudgers etc. however most of the time I do break the plastic hinges/clips and have to weld them on with a used up soldering tip. I am sure there are a lot of intricate details and tricks that he can share just like you do in your field of expertise. Thank you for your continued efforts!
Just when you think you could not like this guy anymore you see he is a great dad as well. Have learned so much from this channel. God bless you and your family!
I'm a vintage tube amp repair guy and was working on small PCB's on my friends Roland drum triggers and some of the pads were completely missing. I never knew about pad strips like this until today and want to thank you for what's hopefully a easy repair. Thank you, I learned a lot from this video.
I find these videos relaxing, there's some real skills here. If I ever need repairs done, I'll send it here, regardless of international shipping charges, these guys are true craftsmen.
Hi, one idea is to make a live streams. This will save you a ton of time. Just do repairs live - start the camera and forget about it. When a customer comes in, just pause the stream, nobody will get mad. We like how you do the repairs.
Hi Alex great repair. Just a suggestion which I know I'm going to regret saying as it's clear on here that some people really don't like other people having thoughts or opinions but that's life. With your hdmi box I think it would be worth considering adding some caps in there as well. This board repair would be a great example of why it would be handy and it wouldnt really push the cost up that much more.
There is an easier way to solder that tiny cap in. Last time I did one, after applying solder and flux to the pads and sitting the capacitor on the pads, I just heated the two pads on the HDMI connector that connect to it with the soldering iron. The heat actually conducts down to the solder on the cap and it just settles on to the board. No hot air needed, no need to hold it in place, and no risk of having it fly off into the 9th dimension.
hello friend, that low melt tin I do it myself, it works even better by mixing chemicals like indium and gallium with flux and some 60/40 tin with the melter, as for the flux. 👍🏻🔝🔝🔝
Hello, I recently connected a cellphone to my power supply in a reverse polarity for about 10 seconds, the phone took 20 mA current while it was already dead. I want to know the effect on the device for connecting in such a way. Tried to post this in the forum but there was some technical issue.
Such a busy man, first your daughter, than your wife, who's next? Bigboss 😂 just a joke. Very good work alex...as always, i love your work. Better than factory. Great, good video. Greets
how often do you do GPU repairs? and do/can you fix bios bricked gpus? i got a 5600XT it pwoers on and spins but n display and NOTHING can even detect theres a gpu plugged in, im thinking of shorting the pins on the bios chip as i aint got the ability to replace the bios chip but itd be great to see you demonstrate it! and then flash a working bios into it.
hello alex, i have acer nitro 5 2019. yesterday i carried it in my bag in a local bus on a bumpy road which shook it from inside I think. when i came back home and turned it on. it showed some weird artifacts on the screen and stuck on acer logo. After opening it from backside and a physical diagnosis. It turned out to be one of a ram slot problem. IF i apply some pressure one the ram and turn it on. It starts up without any issue, but as soon as i remove the pressure from the ram the laptop suddenly crashes with blue screen of death or shows some artifacts on the screen and gets stuck there. I dont know if its a slot problem or motherboard problem? physically both looks in perfect condition. No damage at all to any thing.
Guys, newbie question. Are new soldering irons when used 1st time the solder doesn't stick or it does not transfer enough heat? because my brand new one does not work properly and I'm wondering what is wrong with it. Any advice guys?
Is it a cheap chinese iron? If so your problem is probably on the tips that are usually really bad (no oxidation protection). Buy a decent tip and try with it, it may solve your problem.
Why don't you have to put some UV mask on the board and then put a new pad? It will hold the new pad firmly on the board. If some UV mask comes over the new pad, you may remove it with your grinding tools.
UV under the pad will increase its height from the board surface hence preventing the neighbouring pads from connecting to their respective pins properly
You should make it mandatory in EVERY considered repair and a header at the top of the website to tell the customer to mail the entire device in or NO FIX. I saw much more potential problems on both boards and suspect components that look like trouble. If a customer gets angry after reassembling their device and it still does not work, I'd assume that they would not pay you even though it is their fault. Upon opening any device mailed in, if it was not the complete device, reseal and back to the customer with explanation. It is just insanity to even try to make a conscientious effort and waste of time to try and repair these separate components. Like dropping off your car for repair without the key.
Hello Alex, I would really enjoy a mini series of Big Boss showing how to open up devices, specifically the ones you are not supposed to get open. I do have sprudgers etc. however most of the time I do break the plastic hinges/clips and have to weld them on with a used up soldering tip.
I am sure there are a lot of intricate details and tricks that he can share just like you do in your field of expertise.
Thank you for your continued efforts!
Just when you think you could not like this guy anymore you see he is a great dad as well. Have learned so much from this channel. God bless you and your family!
You are a fantastic role model, and clearly a loving father.
I'm a vintage tube amp repair guy and was working on small PCB's on my friends Roland drum triggers and some of the pads were completely missing. I never knew about pad strips like this until today and want to thank you for what's hopefully a easy repair. Thank you, I learned a lot from this video.
I find these videos relaxing, there's some real skills here. If I ever need repairs done, I'll send it here, regardless of international shipping charges, these guys are true craftsmen.
I learn so much from your repair videos! If I ever have a repair question I always come back to NorthridgeFix! Thanks for sharing your knowledge!!
Your daughter is absolutely beautiful! What an angel 😇!
👍👍
Hi, one idea is to make a live streams. This will save you a ton of time. Just do repairs live - start the camera and forget about it. When a customer comes in, just pause the stream, nobody will get mad. We like how you do the repairs.
God bless you and your family 🌷🌷
U r the best my friend ربي يوفقك ❤️
Hi Alex great repair.
Just a suggestion which I know I'm going to regret saying as it's clear on here that some people really don't like other people having thoughts or opinions but that's life.
With your hdmi box I think it would be worth considering adding some caps in there as well.
This board repair would be a great example of why it would be handy and it wouldnt really push the cost up that much more.
3 hands work ,nice alex sir.
God bless you and your family 👍🏾
Top notch brother 👍
مبدع كالعادة نحبك في الله ❤️
Good job mate 👍
Great job .keep uploading more repair videos
Thanks!
الله يحفظها و يرعاها 😍🤩🤩
Whoa, you worked in that tiny cap with the hot air station. NGL, I puckered up a bit there.
Great video thenks for sharing and sorry for my English .... And thenks the people down in the comments for help to in proove my English
great video thanks for sharing and sorry for my English
@@Anthony_The_Chicken_Licker thenks a lot:)
What's the update on your new house purchase? Have you found a new house ?
A live stream would be awesome.
There is an easier way to solder that tiny cap in. Last time I did one, after applying solder and flux to the pads and sitting the capacitor on the pads, I just heated the two pads on the HDMI connector that connect to it with the soldering iron. The heat actually conducts down to the solder on the cap and it just settles on to the board. No hot air needed, no need to hold it in place, and no risk of having it fly off into the 9th dimension.
great job for one more time....
hello friend, that low melt tin I do it myself, it works even better by mixing chemicals like indium and gallium with flux and some 60/40 tin with the melter, as for the flux. 👍🏻🔝🔝🔝
5:50 no wonder we cant be same level as him,he got 3 hand🤣😂,as always Good repair video
Lovely Caring father
Great job ربي يحفظكم 👍
Awesome job bro keep rocking bro 👍👍👍
as always great skill alex.. obviously your daughter gets her looks from her mother ....
What are the solder points that don't have a trace going to them? Ex the fifth one from the right..
What microscope do you use?!?!
ربي يحفظ البنوتة
More from this kind if content Alex.
ربي يحفظكم و يفضلهالك
Can you post how to fix phones like Samsung and iPhone for beginners.
I wish you good luck and god keeps you and your family safe
GL bro
so sweet
she is adorable ☺
Hello, I recently connected a cellphone to my power supply in a reverse polarity for about 10 seconds, the phone took 20 mA current while it was already dead. I want to know the effect on the device for connecting in such a way.
Tried to post this in the forum but there was some technical issue.
Have you considered getting a desoldering station?
Vampire wick is all that’s needed!!
What tv do u recomend for the digital microscope?
Hope your nail heels quickly 👍
Awesome ✌🏻✌🏻✌🏻
Such a busy man, first your daughter, than your wife, who's next? Bigboss 😂 just a joke.
Very good work alex...as always, i love your work. Better than factory.
Great, good video. Greets
LMAO.. your delivery of jokes is right on point..
May Allah SWT bless you and your family ❤️
Who is SWT?
@@anuragsharma1993 its short hand for the arabic for ''glorified and exalted is He''
how often do you do GPU repairs? and do/can you fix bios bricked gpus? i got a 5600XT it pwoers on and spins but n display and NOTHING can even detect theres a gpu plugged in, im thinking of shorting the pins on the bios chip as i aint got the ability to replace the bios chip but itd be great to see you demonstrate it! and then flash a working bios into it.
why are you asking about a GPU repair under a HDMI repair video? mindless
@@jordanindustrialcompaction8381 cuse its the latest one...
This also isn't a forum.
🔥🔥🔥.
Family first we understand.
hello alex, i have acer nitro 5 2019. yesterday i carried it in my bag in a local bus on a bumpy road which shook it from inside I think. when i came back home and turned it on. it showed some weird artifacts on the screen and stuck on acer logo. After opening it from backside and a physical diagnosis. It turned out to be one of a ram slot problem. IF i apply some pressure one the ram and turn it on. It starts up without any issue, but as soon as i remove the pressure from the ram the laptop suddenly crashes with blue screen of death or shows some artifacts on the screen and gets stuck there. I dont know if its a slot problem or motherboard problem? physically both looks in perfect condition. No damage at all to any thing.
The capacitor is also gone in the PS5
ما شاء الله عليك
الله يحفظك
17:11
SOLID
SOLID
SOLID
SOLID
.......
Sou do Brasil e lhe enviei um orçamento para os iPads, mas você não respondeu.
We do not goes by customer is telling. Bcz everybody is not honest...❤️ true.. Everywhere in Earth same story...😀
Guys, newbie question. Are new soldering irons when used 1st time the solder doesn't stick or it does not transfer enough heat? because my brand new one does not work properly and I'm wondering what is wrong with it. Any advice guys?
Is it a cheap chinese iron? If so your problem is probably on the tips that are usually really bad (no oxidation protection). Buy a decent tip and try with it, it may solve your problem.
You did one mistake in this video you didn't say solid on the pins
Why don't you have to put some UV mask on the board and then put a new pad? It will hold the new pad firmly on the board. If some UV mask comes over the new pad, you may remove it with your grinding tools.
It won't cure if it's under the pad because UV light won't reach it
The mask under the pad would not harden because the uv light wouldn't touch it.
Would be better off with superglue for that application but not worth the potential mess
UV under the pad will increase its height from the board surface hence preventing the neighbouring pads from connecting to their respective pins properly
Once I used a candle wax in replacement of soldiering flux and fixed my hdmi connector on my graphics card 😂
"Family comes first."
how you turn off imx 290
Thew way to test it is to connect a monitor up to it and then a power supply
She's so cute 😀 what's her name ? When she grows up, she'll be fixing things "better than factory", just like her father.
❤👌👌👌👍
disable interrupts :)
One minute your child wants a new toy, the next they want a new car & are at university 🤷🏻
I need a hdmi repair or something lol😂 otherwise I may try myself I have everything to do it but a heat gun.
it's time to disapear the hdmi connector , it need to have one video connector like usb-c .
Would the console work with the cap missing? On the phones you sometimes say you don't bother with small caps.
🤲🤚three hands 🤣🤣❤💪
Im practicing what u said.using my feet with hot air nozzle.but i got burned..😂
I do not understand how people can damage their stuff like that !
I prefer more talk more work😁
Ur daughter is beautiful ما شا اللّة
You should make it mandatory in EVERY considered repair and a header at the top of the website to tell the customer to mail the entire device in or NO FIX.
I saw much more potential problems on both boards and suspect components that look like trouble.
If a customer gets angry after reassembling their device and it still does not work, I'd assume that they would not pay you even though it is their fault.
Upon opening any device mailed in, if it was not the complete device, reseal and back to the customer with explanation.
It is just insanity to even try to make a conscientious effort and waste of time to try and repair these separate components.
Like dropping off your car for repair without the key.
3 hands😳
I dоwnloaded everything is okay
Your daughter is very beautiful
so what we all want to know is did you pick up the dry cleaning? i mean that is why the wife rang right? :P
No But I did the dishes
Most important thing in life is ?
PS5
Men nowadays can fix their makeup in solder joint too.
First like & comment 😃😃😄
السلام عليكم
I think first
👍👍