Swapping a Ski-Doo X-RS Suspension into a MX-Z TNT | KYB PRO 40s | Upgrading Shocks!

Mike helps Serg (his brother in law) swap out his Ski-Doo MX-Z TNT shocks with a beauty set of KYB PRO 40s of off an X-RS. It definitely was not a quick job, and if you plan on doing the same, give yourself a few hours and a couple of beers and the job is done!
---------------
#skidoo #gen4 #kyb #mxz #xrs #brp #linq #beahero #gosnowmobilingontario #thatskidoofeeling #polaris #vr1 #bringonwinter #sledding #snowmobiling #snow #snowmobile #sledders #qualipieces #rollerski
Check out the Sledaddicz Store at sledaddicz.com for all your apparel needs, including hats, toques, sweaters, t-shirts, mugs and more!
Find us on Instagram and Facebook:
IG: sledaddicz
FB: sledaddicz
If you have any general questions, shoot us an email at [e-mail].
For Jesse specifically, email [e-mail]
For Mike specifically, email [e-mail]

[@whiteman3075]

The sticker on back side with part number tells you left or right but doing the way you did was perfect way to know

[@sledaddicz]

Thanks Jason! Ya either way works but its easy to look at the position of the bump. Cheers, Jesse

[@mrmoparrr]

Went for Upgrade on my 2019 850 TnT also with Kyb’s up Front and Ellka stage 4 in rear skid and Whoa what a difference.

[@terrytuepah171]

Just a reminder if you have no snow in your area it’s the free weekend in the province of
Quebec get out and ride guys

[@sledaddicz]

Thanks Terry! We get permits in Quebec every year and ride there 3 to 4 times a season. Cheers, Jesse

[@TheJrschaefer]

Had hoped for a detailed install video. Same bolts, and hard ware used for and aft? Wrench sizes, tools needed and torque specs? The fast forward with random music is not very helpful….technical value is always helpful and likely why most people would click on this video. I have a 17mxz 850 with 8k need to either rebuild or replace my HPG shocks.

[@sledaddicz]

Thanks for the feedback. Everything is the same which is why I didn't show the details. Reuse all factory hardware. Very easy job. Mike

[@thekingofawsometallarigo3900]

how are you able to identify shocks that will fit a certain sled i’m looking for my 2008 809 dragon and am have trouble finding new shocks

[@sledaddicz]

Typically you need to measure from eye to eye to know if they will fit. Cheers, Mike

[@MBTUE]

Great sled , now it's even better . What did the shocks cost you ? Was thinking of doing the same to my 2019 Blizzard .

[@markslayton9114]

Mark - I striped the cheap throwaway shocks off my wife’s renegade sport and put Elka stage 4’s out front and X package KYB’s in the rear and it’s a whole new sled

[@sledaddicz]

Got them for $1800 for the set. Very reasonable and makes all the difference. Mike

[@andrewadams1213]

I just installed kyb pro 40 clickers all the way around on my 17 tnt 850. Added some new springs and spacers. How did the 600 after?

[@sledaddicz]

Nice! The swap turned out great on the 600. My brother in law is still riding it! Cheers, Mike

[@adamj3579]

I am gonna get a renegade sport and put lynx rave re shocks on it. Lol I might though

[@sledaddicz]

haha that sounds a little expensive.. Don't know if it will fit properly. Cheers, Jesse

[@ivanhamlyn]

Where you buy them?

[@sledaddicz]

There is a guy here on Ontario that often has a lot of them off used or wrecked sleds. Cheers, Mike