How to Install New Poly Bushes On a Fiesta Mk6 Rear Axle!

In this video, I show you how to install new Powerflex rear axle bushes and also a light restore of the rear axle on a Mk6 fiesta.
Disclaimer:- McLaren Media & McLaren_Automotive_Photography present the facts and content in these videos on a strictly fun and informative basis, these videos are not guaranteed to be 100% accurate.
McLaren_Media and all associated names assume no liability for property damage or injury incurred due to any information in this video. Use this information at your own personal risk.
McLaren_Media always recommends safe working conditions and the correct tools and safety equipment before undertaking any type of vehicle repair or photography shoot of any nature.
No information shown in any video will result in any expressed or implied warranty or guarantee of any personal results.
Injury, damages, loss or health implications that may result from improper use of tools, parts and unsafe hazardous working areas or locations and from the information in this video is the sole responsibility of the user and not McLaren_Media.
Titles and Idents available at:-
www.production...
Redbubble Shop:-
www.redbubble....
PICFAIR Shop:-
mclaren-media....

[@madfrank7972]

Get a blow torch on the a axle metal in the thin area surrounding the bush , just for a few minutes . Then knock it out easily with a hammer, easier & quicker than using a puller . Let it cool , clean up the hole , bob in new bush . I do a set a week and always replace with poly bushes. Great video though 👌

[@nzubepaulejiofor8500]

Does one need to take out the rear axle completely to use the blow torch or can it be used while hanging the beam on a Jack?

[@madfrank7972]

@@nzubepaulejiofor8500 just drop it down on your jack mate no need to remove the axle 👍

[@tonyw8777]

Non ST mk6, no track. What's usually recommended, the yellow or purple bushes?

[@felixtv126]

The yellow one
The yellow ones are for the road ,,only‘‘ and the purple ones are for road and track.
The black ones are for ,,track only‘‘

[@theholygoat8826]

Brilliant video mate , what size impact socket did you use too get the old bush out ?

[@harrysewell5506]

Hey mate, do you have a link to your press you got ?

[@Rml2613]

have you got a link to the tool you got from ebay, thanks

[@mclaren_media9145]

www.ebay.co.uk/itm/326101705567?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_Y6JEKWlQGm&sssrc=4429486&ssuid=IZaIq_2cRPi&var=&widget_ver=artemis&media=COPY im pretty sure it was something like that

[@katagalogan]

Hi there, what brand of anti rust did you use? Thanks

[@mclaren_media9145]

Hammertite kurust

[@dreamernetwork9976]

Any link for the press and for the bushes? Trying to do a mk6 zetec s atm

[@mclaren_media9145]

www.ebay.co.uk/itm/326101705567?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_Y6JEKWlQGm&sssrc=4429486&ssuid=IZaIq_2cRPi&var=&widget_ver=artemis&media=COPY

[@t1ber1an]

@@mclaren_media9145 what press are you using, linky no worky, I know quite old post.

[@richardspeed7135]

Good review mate

[@mclaren_media9145]

Thanks 👍 glad you enjoyed it