Simple Way to Tie an FG Knot... No Knot Skills Required!
ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2024
- If you are looking for the simplest way possible to tie an FG knot... this is it! No need to hold the line in your teeth or use your feet. If you are dextarity challenged like me, this is the knot for you. No knot is thinner or goes through your guides smoother than an FG knot! Super strong and super thin, when it comes to making that braid to fluorocarbon connection, the FG knot is king!
- กีฬา
![Mirrr x BUS5 - กี่เหตุผล (1000REASONS) [Live Session]](http://i.ytimg.com/vi/6Ta00hFr2qU/mqdefault.jpg)
Wow! That was the BEST BEST BEST FG knot I have ever seen! Genius!!! My new way.
Ahhh! Why didn't I think about using the handle to hold the main line! THANK YOU for this fantastic tip! I've been losing my hand/finger dexterity for several years and it's becoming very difficult for me to tie knots. Your method for the FG is the best I've come across.
Though, lost horizon, found the right Guy😊🤗🥰😍😀
Love&care 🤩🙏🏻🤟🏻
I have struggled trying to tie this FG knot and have failed badly until now. Your simple video tutorial has me feeling more comfortable and thorough with this technique. Thanks so much
Reviewed countless videos and instructions looking for a easier way to tie this knot. This is by far the best instructional and easiest way I found to tie the F.G. knot. Grazie mille
Indeed the best FG knot video with binding technique so far! My finish are only 2 half hitches and 3x through uni knot without burning the ends - still tight. But the handle-drag-technique a real enlightment since 2 years of FGing!
Thanks for sharing. This is without doubt the best and easiest fg knot I have seen. I'm from Hervey Bay Queensland Australia.
Yep, the best demo of tying the fg knot, if I can't ty it now, I give up. Thanks!
Nice video resulting in a beautiful knot! I too use the reel handle knot to create tension. I didn't think about loosening the drag a bit--will have to try that if it results in a smoother weave. One comment though--you must have kevlar skin on your hands. When pulling the braid and leader in opposite directions to tighten, I would put on leather gloves. I have cut my hands, esp. the braid side, when tightening bare handed.
Nice tutorial. Beautiful, reliable, and strong knot. Personally, I think 40x is an overkill. With that many, it becomes hard to get a good cinch in the lines. I do mine about 15x. However, to each their own. Thank you for sharing. Best to you and your wife. Tight lines 😊
The absolute best video I've seen on tying the FG knot. Thank you!!! P.S. Let me add...one month later I just successfully tied my second FG knot. The first was 20 lb fluro to 30 lb braid. Today was 8 lb fluro to 8 lb braid on my crappie rod. I know...overkill for crappie but I did it for the ease of casting braid. Thanks again for the great video!!!
AWESOME vid. I never even thought about using the flouro itself to lock in the FG towards the end. I used to just half-hitch the end of the FG knot and then burn the tag braid. BTW now I know why you like fishing HH...that is LITERALLY your backyard!
Works amazing, thank you so much.cheers from Canada
This is the fifth video on TH-cam that I've watched on the FG knot tutorial and I think after weeks of staring at my braid and leader I can now finally try to tie them up just like the way this video showed. Thanks for sharing this technique.
what a brilliant idea of using the handle to hold the loop of braid, that is great if ever you need to the fg knot if you are out fishing somewhere.
well done mate🐟🎣🐟👌
Way better than rod poking up in the air. Thanks.
The idea to keep tension on braid line using reel drag is awesome and brilliant
For me his version just clicked! Nice work…Thank you
FG is my go to knot! You’re living the dream Dan! Keep up the vids!! 👍👍
easiest method i've seen yet 👍
What an absolute great and easy way of tying the FG knott , you're a great teacher brother!! Taking your time to share this ,says so much about you!! Million Likes , thanks again!!
I always got confused on how to start my leader on top and then always go under then under on the other side by george i think i just found a easy way remember the rotation great video
I’ll have to try this next time I change my baits
Excellent video and commentary. You make it look so simple!
Great way to do it.
Thank you
I've never seen anyone tying a half hitches with the leader before tying half hitches with the braid. I suppose I will give that a try.
This is the only video I've seen with tying half hitches with the leader and then the braid. I will say though, since tying it this way I've never had a knot failure.
I did try tying one today and not tying the leader half hitches and was surprised that it was just as strong as with the half hitches tied. Don't know how but it was.
Excellent, I’ve watched dozens of FG knot tutorials, this is the clearest and most straightforward of them all.
Crisp and concise with no waffling intro, and a few novel twists on the process
The only downside was a hint of envy when I saw where you live👍🏼😁
Subscribed and ready for more, cheers!
Clarity, thanx to so well thought of black ‘backdrop’… Dan is a compassionate Genius 🙇🏻♂️🙇🏻♂️
That’s a good idea!
Have you tried a red Phillips knot
Absolutely genius! Thanks!
Very smart and effective way to tie this knot
Thats an excelent way! Thanks a lot for sharing!
Genius .. thanks 😊
Good idea using the reel handle. Won’t be able to do those first two half hitches with heavy leader, knot will end up too big
Thanks for sharing man!
Thank you
To bad I didn't see this method before giving up and buying the knot tool. All other methods I watched tried and completely failed at this one I can do....great video and technique.
Awesome video, well done. What kind of line cutter is that?
Lol. After showing us a beautiful FG, the man is gonna torture us by walking out his back door, down the steps……..to the water. Life just ain’t fair. Lol.
Thanks for sharing master
When I try to pull the knot tight I keep snapping the braid at the knot.
Amazing.......
Simple. Thanks dear
Dear?
Another problem with just going overboard with the wraps is you heard the snap when the knot was passing through the guides. That has a tendency to actually wear out your guides as well as loosening up the guides from the locking knots when there are more than what's needed to lock the knot as well as it being alot longer than needed.
I’ve used that method for years and have never had an issue with it. I think if you had a rod with micro guides, that might be an issue for sure. I’ve caught thresher shark, Black Sea bass, and yellowtail using that method and as I mentioned earlier… there’s never been any issues with knot failures or function. 🎣😃
Just a waste of time going beyond 16-20 wraps
I’ve watched numerous videos looking for an easier method of tying the FG knot over the last few months. I too seem to be lacking manual dexterity and good eyesight due to age and had almost given up on the FG knot. Fortunately, I found your video. Your solution of how to put tension on the main line helped immensely. I just finished tying two FG knots using your method and my TH-cam search is over. Thank you.
So nice to read that the method described in the video worked good for you!🎣😃
Great videos buddy!! Keep them coming. It’s a year later but hopefully your wife made a full recovery
My fav.knot to use with the connection. Tip for a super tight knot. Grab an Old Solid foam rod handle/cut in half and wrap That around your Braid and Floro to snug the knot down. I love this knot and will Definetly use your method untilizing the rod handle,never thought about that ... Thanks
LOL, when I try this my weave just keeps bunching up at the center and does not line up on the flourocarbon leader in a nice little row like yours do. Any help would be appreciated.
You only need a little bit of tension on the main line. You want to make sure the drag on your reel is set really loose.
Seams like a lot of work for a knot
You try to give the video more brightness it will be great if you do
Best and easiest tutorial on tying the FG know. I've been tying the know for over 2 years with mixed results but no longer. I'm going to use your method. Thanks. But your last couple of minutes of where you live, boats, pier etc is making me jealous. And if you tell me there's tons of fish in your bay, I will have to give you a thumbs DOWN. You made my day on tying the FG knot and then ruined it by showing where you live! LOL
Thanks Tony!🎣😃
I just use a surgeons know with six passthroughs. Works great.
how did you do it can you share with me , thank you
Where did ya get ur line cutter from pal? Good vid!
Hi Ben… it’s a cutter made specifically for braid, as well as fluorocarbon and monofilament fishing line. The company is called Boomerang and it’s one of the few cutters that really does cut braided fishing line cleanly.🎣😃
Why didnt i think of that 😅
มาชมครับผม+1ครับ
What cutters are you using to trim the leader and braid?
Hi David. I really like Boomerang Snips. They’re inexpensive and they cut braid really well. They typically from $10.99 to $12.99 on Amazon. Most fishing tackle shops stock them also. They have a cool little clip on a retractable line, so you can attach it to your PFD.🎣😃
FG knot has befuddled me. Many promises of easy FG have never been easy for me. I will check this out, however. I settled on the Polaris (Alberto) knot for braid to leader, and the simplified blood knot (very simple) for polycarbon to polycarbon. Extending the subject. I have fallen in love with the Uni for terminal. So easy on the water, and I have never had one fail.
FG is considerably stronger. This way shown is easy for me.
only need to do it 18 times, not 40
Never have I seen anyone half hitch the leader tag over the braid before half hitching the braid tag over leader tag and braid main line….. interesting twist that he doesn’t address. I may try it….
The fg catches in the eyes too... it comes in the top eye at a 45 and can hang. Unless you are using huge eyed rods. Just sayin...
First time seeing an FG knot with leader overhand knots.
Nice method but way over done. You can't properly tension an FG knot with that many wraps.
way too many turns, if every turn does not receive the tension to pull down it can release. I stop at 16, 8x2
Ive been trying for hours, the difficulty is no different to any other video I've watched. There's no way I can do this, I copy this to the letter and it looks nothing like this. There is no easy FG knot, it simply comes down to whether you can or can't
You should definitely try the "No tension FG knot" method. Its super easy.
As difficult as this is to tie it should be called the F that knot. I'll stick with the Alberto.
thers no need for the knot to be that long i only do 10 each side
I really don't understand why people use leaders, it's such a gimmick. Using just mono to the hooks / swivels and it hasn't failed me and a lot of other people in a very long time. If your line breaks it's due to a bad knot, fish that are not rated for that line or it rubs on something and even fluoro will break.
All you need is good knots to the sinkers, hooks etc. Fluoro isn't stronger than mono and it's been proven, it's not
more clear than mono as well.
Flourocarbon is denser so it sinks vs floating mono. I use Mono, I use Flouro, I use braid. They all have a purpose.
I really don't understand why people use mono. Using braid to leader hasn't failed me in a long long time, all you need is good knots :-) It's not a gimmick, with braid I can adapt to any situation and use mono or fluorocarbon leaders at the business end in any length I choose, 1 foot or 20 feet, and in any strength or diameter. Braid can last years and offers way more sensitivity, better hooksets, and longer casts. It's just a better and more versatile system than straight mono or fluoro especially more so when you consider the new sinking braids that are hitting the market.
Dude way to many wraps.
Bla bla bla