I know, we’ve done a couple FG knot videos but this one is a little different with some new updates on it. This knot is hard to learn but I promise once you get it down you’ll never use anything else!
Thank You, Ott!!!!!! I had given up on the FG knot, but you have pointed out the HUGH mistake that other instructors either didn't emphasize or I was just too slow to pick up on........I was keeping my braid TOO TIGHT and my knots were not taking advantage of the, "GIVE or FLEX'', in my braid. Therefore, my fluoro or mono wraps were just piling up on each other and I became so frustrated thinking I was the stupidest fisherman in history (which would have confirmed others thoughts about me!!! HA!!) You saved my bacon!!! Now I have to try tying this knot in a rocking boat at 40 degrees and 20 mph wind.....Keep teaching and sharing as you have the knack!!
@ottdefoe I have seen so many different ways to tie this knot, I like this way. Thank you Your biggest fan from MN, ..... falafel, is that what I caught in MN. LOL
You have no idea how many different videos/attempts I’ve had at this knot and this is the first time I have been able to successfully tie this knot and I’m so happy about it. This is going to change my fishing forever, I’ll be able to skip better and just cast better in general thank you Ott for making it that much more simple.
I was cleaning up behind my partner this summer punching mats in pads with a leader of 30lb big game FG knotted to 65. Leader ALL the time, right on Ott!
I've been practicing for two days now. My main line is 20lbs braid. My "leader" is 8lbs fluoro. I have the FG figured out. But my fluoro will slip through the fine grip "wraps" of the knot. The diameter of the two lines is nearly identical. I have 20lbs fluoro Seagar Tatsu ordered. I figure the FG will bite into the larger diameter line and hold. It's a fun knot to tie. You can see it lengthen as you make the wraps.
I like your method of using the rod to put tension on the braid. I've seen sketchy FG knot videos by pros. But your FG knot was consistent. Always wet braid to get a good knot. I like to pull on the lines using a tool without cutting into your hand.
I have struggled with this knot for so long. Anchoring the braid to the reel handle with the loop knot is a step I never thought of before, but it is the key to tying it successfully every time! Thanks, Ott!
Thanks Ott, I was really struggling with the FG knot your new method is the choice. Use the flyfishers technique add a bit of power flex UV glue drys in seconds. That will cinch it up complete. Come on down to Florida when it gets cold you will like it in December.
Man Ott this is the best video I have seen ever on how to with the fg knot thank you going to practice that way loop around handle and wrapped around index and middle. I'm left handed but was raised by right handed people so I'm ambidextrous. Being using this knot now all the time
Ott, I have tried tying this knot over and over with no luck....only frustration. After watching your video, I literally tied it the first time and have tied it several times since with great success! I really appreciate it and God bless!
Thank you so much for making this video! This is the only video that I could find that it was actually explained how to tie it. I may have had a headache after it but it was worth it!
Another great video! I’m left handed as well and it’s so helpful to finally find someone to explain the FG knot and other knots so it makes sense to me. 👍🏻 getting ready to watch your second day of qualifying at Smith Lake. Good luck and God Bless!🎣🇺🇸🙏🏼
I have tried this knot multiple times, with some success but more me getting frustrated pulling the leader line out when I try to synch it. I like your method as I am not trying to hold tension on both lines. Thank you for taking the time to show us how you tie the knot
Very hard knot to understand. I’ve been doing 2 Berkeley or fisherman’s knots and the braid cuts through the flouro. So definitely gonna go home and watch again to see if I can get it right. Thank you sir
Thanks Ott. I have never used the FG knot but it will become my go to from now on. I agree with the issue of getting the knot in the guides. There have been times I could feel it clear the top guide and missed my target!
This video helped alot. I found that setting the drag so I can pull line as needed allows me to keep everything nice and tight without leaving things loose at first.
I tie it the same way but this year I experimented alot and you can actually tie like a 12 Footer and wind it thru the reels line guide effortlessly. I was surprised. Great video tho ott!!
I learned to cut the flouro tag end after the first overhand and then 3 more overhands above that like you do, clip the braid and burn the braid tag end down, makes the knot even smaller, pretty slick deal!
Excellent. Use all the time but the loop/handle idea is great and the leader length explanation worth every second of viewing this!👌👌BTW LOVE YOUR #rapala OG 4” Slim-nice eater walleye this AM. Smoked it
This method worked for me first try. I failed with other videos, even another that used the reel for tension. I think the key differences were: 1. Backing off tension on the braid after looping over the reel handle (I had been keeping it way too tight, so the braid had no give at all.) 2. Gently tugging the leader material perpendicular to the braid after each second weave over the braid. It's that tug, along with a bit of flexibility in the braid that started forming the distinct coil of braid around the leader. In my failures the leader would just wrap around the braid. When the braid is somewhat loose, the leader weaves are able to sort of invert into the braid.
What a Great Tip!!!👊🏻 Like the four knots at the end. I agree with that loop. Looks like it's a lot more easier & better control. I'm guessing you can do the same with a spinning rod? Stay Safe & God Bless!!!
Thanks for doing this!! I'm having trouble w it my wraps end up in a ball and it's just w this big line same what u just used. So obviously I'm not putting enuff tension somewhere.
Awesome! Any chance you’d consider making a video on cold/windy weather gear to stay warm while fishing in winter? Insulated/uninsulated. Water Proof bibs and jacket all day over warm clothes, or just wind breaker? Ect God Bless!
Thanks a lot, Ott! I had a buddy teaching me this knot, but using teeth. It sucks 🤣 Tying it off to the reel makes it so much easier! Two questions if I may..... Do you ever use glue on your FG knots? Have you pros ever found a way to protect your hands while tying knots? I fish in really clear water using 4-7lb line.... I'm sick of my hands getting sliced up like razor blades 🤣
@@OttDeFoeFishing Thanks a lot for the reply dude, I appreciate it 🤘🤘 You're the 2nd pro I've talked to in a week.... I met Skeet the other day at the boat shop. Didn't know he lives right by me 🤣
Lost me finally..at ok now, just four more, than, now just three more.. I'll stick with something simpler..I'm not fishing for tarpon...just 3 lb bass. But love following you on MLF.
I have just a couple questions about the knot. Would you recommend this knot with mono to fluorocarbon? If so would you use more or less wraps? And is there a upper or lower limit to the pound test line you can use this knot with?
Thanks for a great video that's easy to follow! One question: At the end of the knot could you trim the flouro and then add overhand knots to encase the tag end of the fluoro?
I was actually taught to cut the fluoro, first, like you mention. But, after watching this video, I think there may be some validity in tying the overhands, first. I think it may help ensure that the fluoro tag is better secured, and it may be the reason why I recently had a few failures in my knot. I know it was tied, well, as I caught several decent fish just fine off of it, AND I made sure it was snugged tight. But, sure enough, that knot failed over time. Those knots before cutting the leader may be the key to avoiding that. I'll have to experiment and find out.
Would you add onto this video a copy of the knot-tying portion that is mirror-imaged for us right-handed who are also mentally challenged? Thank you and Lord bless!
I wanna message u here about another video I want u to do on what to do in a big tx when u had a good practice during week until sat u put 150/200 boats on lake and it goes south. Steady weather just the pressure affecting the tx. Need to know what an where to go in these situations
Tough one! A lot of times I try to find an area that may not be as good but has some fish vs being in an area with tons of fish but tons of people. Numbers just work out better some times.
Every time I do the half hitch knot, the knot does not butt up against the FG knot. i am Ex-Navy, but with serious Neuralogical Condition. Tying Knots are extremely difficult. I have missed a lot of fishing time because of this, but i am stubborn. I want the Braid / Fuorocarbon joined line.
... You are a pro and it works for you (and anyone else) so keep on keepin on. . - Think about this: - Once the first overhand knot (half hitch) is tied to lock the FG down, that will hold it. Agreed. - 2 or 3 more overhand knots (half hitches) over the BRAID and LEADER, so far, so good. Agreed. - After the overhand knots are tied over the BRAID and LEADER, the knot is finished and is as strong as it is going to get. . - My point: - When you tie the braid to braid knots BEFORE you trim the leader, those knots are UNDER the leader end making the leader end (after trimming) stick out a little further than it should or has to. That is creating a bump or a catch point when coming back through the guides. Yes, it may be small but it doesn't have to be like that. - It can and will also be more likely to catch SAV (submerged aquatic vegetation) grass/weeds because that point or bump is pointing towards the rod end, the direction the line is moving when reeling in the line. . - Suggestion: - I have been doing it this way for a while but what do I know. Please, think about it though. Look at the knot closely. - Before the BRAID to BRAID overhand knots (half hitches) are tied, trim the leader, THEN tie the BRAID to BRAID overhand knots in FRONT of the trimmed leader. - This creates a slight build up (ramp) on the braid BEFORE the leader end thus making a smoother transition when the FG is going through he guides, ESPECIALLY micro guides. - The Rizzuto Finish is another way. . - Anyway, you are a pro and I'm a regular old common sense thinker of things so as I said, your way works for you so don't ever change, keep on keepin on. I wish you and all anglers the very best. . Thanks for taking the time to make the video. I always learn something. . Jeff . .
Still like shaw 's method! Just put about 20-25 yards of fluorocarbon on your bait caster ! Tie it on your braid ! Wind it up ! Done one knot to the hook ! And dont have to tie these crazy knots ! Ty
Hey Mr defo I have a way way better and stronger not than a fg knot I saw this knot tested on a professional line tension machine . And they were testing all kinds of knots and that fg knot broke at 50 percent you know which knot was at 100 percent strength it's called a GT knot that is the absolute strongest knot for braid to fluorocarbon you can tie and believe it or not it's way easier to tie. Not trying to be a smartass or a jerk just thought I would mention that to you and others if they don't like tieing the fg knot or find it difficult of course ote is showing you guys a simplefied way to tie it wich is awesome but if you guys want something just super super strong I don't if I should have mentioned it I don't want ruffle anybody's feathers . God bless you all and have a nice day and just to mention I've had that fg knot slip and break on me 3 times and I said I must be tying it the wrong way and I kept going through the knot tying video and I wasn't tieing wrong .
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 3](http://i.ytimg.com/vi/A1XXYbV048k/mqdefault.jpg)
This is the *best* explanation on how to tie this knot. To me, the search is over, and it is time to tie the fg knot properly. BZ
I think this may be the easiest fg knot tutorial that I've seen,thanks
Glad you liked it!
finishing knots are half hitch knots. Awesome way to tie FG. Really Great Stuff!!!
71 years young, 1st time FG. Nothing to it ! Many Thanks, I needed that.
Thank You, Ott!!!!!! I had given up on the FG knot, but you have pointed out the HUGH mistake that other instructors either didn't emphasize or I was just too slow to pick up on........I was keeping my braid TOO TIGHT and my knots were not taking advantage of the, "GIVE or FLEX'', in my braid. Therefore, my fluoro or mono wraps were just piling up on each other and I became so frustrated thinking I was the stupidest fisherman in history (which would have confirmed others thoughts about me!!! HA!!) You saved my bacon!!! Now I have to try tying this knot in a rocking boat at 40 degrees and 20 mph wind.....Keep teaching and sharing as you have the knack!!
Glad it helped!!
@ottdefoe I have seen so many different ways to tie this knot, I like this way.
Thank you
Your biggest fan from MN,
..... falafel, is that what I caught in MN. LOL
Very helpful. 8 lb P-line fluoro to braid no problem on 1st and 2nd attempt. Thanks!
Glad it helped!
This ranks as one of the best FG knot how to's I've seen.
Best way to tie I was struggling and I'm pretty good with knots definitely the best way!!!!!
Glad it helped.
You have no idea how many different videos/attempts I’ve had at this knot and this is the first time I have been able to successfully tie this knot and I’m so happy about it. This is going to change my fishing forever, I’ll be able to skip better and just cast better in general thank you Ott for making it that much more simple.
I was cleaning up behind my partner this summer punching mats in pads with a leader of 30lb big game FG knotted to 65. Leader ALL the time, right on Ott!
It took me 2 weeks of watching what seemed like 100 videos on how to tie this knot...but it was well worth it
I've been practicing for two days now. My main line is 20lbs braid. My "leader" is 8lbs fluoro. I have the FG figured out. But my fluoro will slip through the fine grip "wraps" of the knot.
The diameter of the two lines is nearly identical.
I have 20lbs fluoro Seagar Tatsu ordered. I figure the FG will bite into the larger diameter line and hold.
It's a fun knot to tie. You can see it lengthen as you make the wraps.
I like your method of using the rod to put tension on the braid. I've seen sketchy FG knot videos by pros. But your FG knot was consistent. Always wet braid to get a good knot.
I like to pull on the lines using a tool without cutting into your hand.
Best knot I've ever found for braid to flouro! Smooth as butter and tougher than a sidewinder on a red ant hill.
I have struggled with this knot for so long. Anchoring the braid to the reel handle with the loop knot is a step I never thought of before, but it is the key to tying it successfully every time! Thanks, Ott!
Best and easiest to understand version I've seen yet - I may actually be able to get this thing tied now!!
Good!!!
Thanks Ott, I was really struggling with the FG knot your new method is the choice. Use the flyfishers technique add a bit of power flex UV glue drys in seconds. That will cinch it up complete. Come on down to Florida when it gets cold you will like it in December.
Thanks been trying for 6 months. And tied my first last night.
Thank you for your videos. This has made my FG knots so much better & easier to tie.
Thanks! That’s is the best and easiest way to tie the FG knot for me. I was about ready to give up on it but your way makes it easy!
Glad it helps.
This was by far the best tutorial I've seen yet and it's very much appreciated!!!
Great explanation - mucho appreciado!
Now I feel like I know enough to try and tie and use that knot. Thanks Ott.
Man Ott this is the best video I have seen ever on how to with the fg knot thank you going to practice that way loop around handle and wrapped around index and middle. I'm left handed but was raised by right handed people so I'm ambidextrous. Being using this knot now all the time
Mate I can’t thank you enough. This video is far far better than all the others on the FG not. 🙏
Thanks OTT! Had given up on the FG till i saw this. For whatever reason this method works for me and its not nearly as difficult!
Great video Ott. Still trying to learn this knot. This video helps alot. Thanks.
Best explained that ive seen. THANKS
What a great video Ott, everything very good explained and perfect filmed! Thanks for sharing and greetings from the Netherlands, Pat. 👊🏼👍🏼🇳🇱🎣
Ott, I have tried tying this knot over and over with no luck....only frustration. After watching your video, I literally tied it the first time and have tied it several times since with great success! I really appreciate it and God bless!
This worked. After tons of videos, finally. Thank you!
Thank you so much for making this video! This is the only video that I could find that it was actually explained how to tie it. I may have had a headache after it but it was worth it!
Day and Night difference with your advice!! Been tying FGs in my living room today and Holy Toledo (where I'm from) I'm having fun!!
Glad it helped!
thank you for making it possible
Love your videos, there's always something to be learned!
Another great video! I’m left handed as well and it’s so helpful to finally find someone to explain the FG knot and other knots so it makes sense to me. 👍🏻 getting ready to watch your second day of qualifying at Smith Lake. Good luck and God Bless!🎣🇺🇸🙏🏼
best knot, period
Thanks that's the best one I've seen yet and the easiest
I have tried this knot multiple times, with some success but more me getting frustrated pulling the leader line out when I try to synch it. I like your method as I am not trying to hold tension on both lines. Thank you for taking the time to show us how you tie the knot
Glad it helped!
Great information, this is a good knot but has always been hard for me to tie. I'll definitely try this technic. Thanks Ott
Very hard knot to understand. I’ve been doing 2 Berkeley or fisherman’s knots and the braid cuts through the flouro. So definitely gonna go home and watch again to see if I can get it right. Thank you sir
Thanks Ott. I have never used the FG knot but it will become my go to from now on. I agree with the issue of getting the knot in the guides. There have been times I could feel it clear the top guide and missed my target!
This video helped alot. I found that setting the drag so I can pull line as needed allows me to keep everything nice and tight without leaving things loose at first.
"uni to uni" for me. I'm to old and half blind so no new knots for me. Love your channel.
I tie it the same way but this year I experimented alot and you can actually tie like a 12 Footer and wind it thru the reels line guide effortlessly. I was surprised. Great video tho ott!!
I learned to cut the flouro tag end after the first overhand and then 3 more overhands above that like you do, clip the braid and burn the braid tag end down, makes the knot even smaller, pretty slick deal!
Excellent. Use all the time but the loop/handle idea is great and the leader length explanation worth every second of viewing this!👌👌BTW LOVE YOUR #rapala OG 4” Slim-nice eater walleye this AM. Smoked it
I've tried different ways but never tried the loop on the end . Looks like u can control your tension alot easier. Thanks for the tip.
Great Video Ott,Thanks!!
Thanks Ott i appreciate it 🙏
Thanks for sharing master.
This method worked for me first try. I failed with other videos, even another that used the reel for tension. I think the key differences were:
1. Backing off tension on the braid after looping over the reel handle (I had been keeping it way too tight, so the braid had no give at all.)
2. Gently tugging the leader material perpendicular to the braid after each second weave over the braid.
It's that tug, along with a bit of flexibility in the braid that started forming the distinct coil of braid around the leader. In my failures the leader would just wrap around the braid. When the braid is somewhat loose, the leader weaves are able to sort of invert into the braid.
Awesome! I’ve had several people tell me they struggled with it until they found this video.
What a Great Tip!!!👊🏻 Like the four knots at the end. I agree with that loop. Looks like it's a lot more easier & better control. I'm guessing you can do the same with a spinning rod? Stay Safe & God Bless!!!
Thanks for doing this!! I'm having trouble w it my wraps end up in a ball and it's just w this big line same what u just used. So obviously I'm not putting enuff tension somewhere.
Yes I was having the same issue. The step where he pulls across the leader and not up and down the braid is the key. Also you pull every two wraps.
Great demo Ott
Awesome! Any chance you’d consider making a video on cold/windy weather gear to stay warm while fishing in winter? Insulated/uninsulated. Water Proof bibs and jacket all day over warm clothes, or just wind breaker? Ect God Bless!
Thanks a lot, Ott! I had a buddy teaching me this knot, but using teeth. It sucks 🤣
Tying it off to the reel makes it so much easier!
Two questions if I may.....
Do you ever use glue on your FG knots?
Have you pros ever found a way to protect your hands while tying knots? I fish in really clear water using 4-7lb line.... I'm sick of my hands getting sliced up like razor blades 🤣
I do not use glue ever on mine. That is something I’ve thought about making but not came up with anything yet to keep line from cutting you.
@@OttDeFoeFishing Thanks a lot for the reply dude, I appreciate it 🤘🤘
You're the 2nd pro I've talked to in a week.... I met Skeet the other day at the boat shop. Didn't know he lives right by me 🤣
Lost me finally..at ok now, just four more, than, now just three more.. I'll stick with something simpler..I'm not fishing for tarpon...just 3 lb bass. But love following you on MLF.
Thank you!!
What are the clippers/scissors that you’re using. Also, easy to follow video. Thanks
I have just a couple questions about the knot. Would you recommend this knot with mono to fluorocarbon? If so would you use more or less wraps?
And is there a upper or lower limit to the pound test line you can use this knot with?
The rizzuto finish is the way to go with the FG.
Overall great at the game,
Thanks for a great video that's easy to follow! One question: At the end of the knot could you trim the flouro and then add overhand knots to encase the tag end of the fluoro?
I did that some but like this better.
@@OttDeFoeFishing do you think there’s any difference between doing it either way? I was taught to cut the fluro before the last 3 overhands
Ol boy had to go to the nail salon and get dem fangers done for this video.
This product lasted me a long time. It was very durable and I will be purchasing this again when I run out.
This was a great video. I can tie it now.
How can I get one of those caps?
They are on our website under gear. Ottdefoe.com
Why not tie the 3 braid only overhand knots after you cut the fluro not before?
I was actually taught to cut the fluoro, first, like you mention. But, after watching this video, I think there may be some validity in tying the overhands, first. I think it may help ensure that the fluoro tag is better secured, and it may be the reason why I recently had a few failures in my knot. I know it was tied, well, as I caught several decent fish just fine off of it, AND I made sure it was snugged tight. But, sure enough, that knot failed over time. Those knots before cutting the leader may be the key to avoiding that. I'll have to experiment and find out.
Would you add onto this video a copy of the knot-tying portion that is mirror-imaged for us right-handed who are also mentally challenged? Thank you and Lord bless!
I wanna message u here about another video I want u to do on what to do in a big tx when u had a good practice during week until sat u put 150/200 boats on lake and it goes south. Steady weather just the pressure affecting the tx. Need to know what an where to go in these situations
Tough one! A lot of times I try to find an area that may not be as good but has some fish vs being in an area with tons of fish but tons of people. Numbers just work out better some times.
Does anyone know the line strength retention percentage on this knot? Just curious
Every time I do the half hitch knot, the knot does not butt up against the FG knot. i am Ex-Navy, but with serious Neuralogical Condition. Tying Knots are extremely difficult. I have missed a lot of fishing time because of this, but i am stubborn. I want the Braid / Fuorocarbon joined line.
Try the Alberto Knot.... I think it would be easier for you
Serious question, but funny question. What is Ott Defoe's secret to Calf Muscles?
standing on the boat when others don't want to go out...lol
... You are a pro and it works for you (and anyone else) so keep on keepin on.
.
- Think about this:
- Once the first overhand knot (half hitch) is tied to lock the FG down, that will hold it. Agreed.
- 2 or 3 more overhand knots (half hitches) over the BRAID and LEADER, so far, so good. Agreed.
- After the overhand knots are tied over the BRAID and LEADER, the knot is finished and is as strong as it is going to get.
.
- My point:
- When you tie the braid to braid knots BEFORE you trim the leader, those knots are UNDER the leader end making the leader end (after trimming) stick out a little further than it should or has to. That is creating a bump or a catch point when coming back through the guides. Yes, it may be small but it doesn't have to be like that.
- It can and will also be more likely to catch SAV (submerged aquatic vegetation) grass/weeds because that point or bump is pointing towards the rod end, the direction the line is moving when reeling in the line.
.
- Suggestion:
- I have been doing it this way for a while but what do I know. Please, think about it though. Look at the knot closely.
- Before the BRAID to BRAID overhand knots (half hitches) are tied, trim the leader, THEN tie the BRAID to BRAID overhand knots in FRONT of the trimmed leader.
- This creates a slight build up (ramp) on the braid BEFORE the leader end thus making a smoother transition when the FG is going through he guides, ESPECIALLY micro guides.
- The Rizzuto Finish is another way.
.
- Anyway, you are a pro and I'm a regular old common sense thinker of things so as I said, your way works for you so don't ever change, keep on keepin on.
I wish you and all anglers the very best.
.
Thanks for taking the time to make the video. I always learn something.
. Jeff .
.
Nah, takes too long. I think it would save time and trouble to grow into fishing leaderless. Straight braid or nylon line. Thanks Ott.
i think those are half hitches not overhand knots
Good info but poor footage. Should have been close up on knot.
Still like shaw 's method! Just put about 20-25 yards of fluorocarbon on your bait caster ! Tie it on your braid ! Wind it up ! Done one knot to the hook ! And dont have to tie these crazy knots ! Ty
Hey Mr defo I have a way way better and stronger not than a fg knot I saw this knot tested on a professional line tension machine . And they were testing all kinds of knots and that fg knot broke at 50 percent you know which knot was at 100 percent strength it's called a GT knot that is the absolute strongest knot for braid to fluorocarbon you can tie and believe it or not it's way easier to tie. Not trying to be a smartass or a jerk just thought I would mention that to you and others if they don't like tieing the fg knot or find it difficult of course ote is showing you guys a simplefied way to tie it wich is awesome but if you guys want something just super super strong I don't if I should have mentioned it I don't want ruffle anybody's feathers . God bless you all and have a nice day and just to mention I've had that fg knot slip and break on me 3 times and I said I must be tying it the wrong way and I kept going through the knot tying video and I wasn't tieing wrong .
I’ll check it out!