ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Woodturning - Lidded Boxes
ฝัง
- เผยแพร่เมื่อ 3 ธ.ค. 2015
- I turned these lidded boxes in separate pieces, with a inlay piece in the lid. This is a great way to use up scrap pieces around the shop. I used Maple and Walnut for this one. If you try this project be sure to let me know! I would love to see some pictures.
THANK YOU FOR YOUR SUPPORT
I put together a list of some of the tools I use in my shop
(affiliate) link for my Amazon Store,
if you'd like to support what I do, shop through this link:
www.amazon.com/shop/thewoodsh...
YOU CAN ALSO FIND ME:
= www.etsy.com/shop/Thewoodshoptv
= www.thewoodshop.tv/
= thewoodshop...
= / thewoodshoptv
I put together a list of some of the tools I use in my shop
(affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link:
www.amazon.com/shop/thewoodsh...
I'm a Robust dealer if you have any questions I'd be more than happy to help.
jacobson68@yahoo.com
Robust Woodturning Tools!
www.turnrobust.com/
Easy Wood Tools
www.easywoodtools.com/
Wood Turners Wonders
woodturnerswonders.com/
Peppermill kits
www.arizonasilhouette.com/prod...
ChefwareKits
www.chefwarekits.com/?trackin...
Brandenburg Concerto No4-1 BWV1049 - Classical Whimsical by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Antarctica by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/
#woodturning #woodlathe #turning #lathe #liddedboxes #boxturning #carljacobson #robustlathe #eastwoodtool #segmentedturning #woodworking #woodenboxes
#woodturning #woodturning #woodlathe #woodturningprojects #carljacobson
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 64 [ซับไทย]](http://i.ytimg.com/vi/Pmsta0byEpk/mqdefault.jpg)
I put together a list of some of the tools I use in my shop
(affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link:
www.amazon.com/shop/thewoodshoptv
carl i would love to get some of that paint inlay
Is there a video of using auto clearcoat paint finish on wood?
@@The_Joker_ I haven't seen any using automotive clear.
@@CarlJacobson I must give it a try and see how it comes out.
Very good work! Great video, thanks so much and keep them coming! I am a 25 year, journeyman machinist, and dabble in wood projects between metal jobs. You are inspiring and make it look so much less daunting. I stumbled across your video after making magic wands for my kids. I turned some on my metal lathe and they came out great. Simple wands at first, then got hooked and now am up to 28 of them, some with acrylic inlay. I love wood projects so much more than metal! If you make a mistake, well, that is how it looks now! It's art, not a part! Thanks again!
Beautiful grain patterns on those woods! Another cool project! Thanks for sharing
+Scrap wood City Thank you so much!
I turned these lidded boxes in separate pieces, with a inlay piece in the lid. This is a great way to use up scrap pieces around the shop. I used Maple and Walnut for this one. If you try this project be sure to let me know! I would love to see some pictures.
I spent the past two days making boxes with lids, wish I had watch this first., would have saved myself lots of time, correcting my mistakes. Going to try it your way, tomorrow. Thanks for the tips & help.
Thank you very much Linda! I love to see some pictures of the boxes you've made. thewoodshop.tv
Let me try your way a couple of times, I was making it to difficult & much to chuncky, like the way yours looked much better. We enjoy our time in the shop, both my husband & myself. Thanks again for the help.
Nice to see the return of the small boxes. I love your early videos, but this time with all the extras. Well done.
+Paul Lockwood Thank you Paul!
Perfect turning Carl.
Boxes are a real joy to turn and make great gifts.
Best wishes,
Alan.
+Alan Simpson Thank you very much Alan. I really enjoy making them.
Take care,
Carl
Hollywood should be banging on the door any minute now! Well produced! ;>) Thanks for sharing ... Larry
+The Tiny Trailer Workshop :) Thank you Larry!
Beautiful Carl. Small boxes are my prefered woodturning projects. Thanks for sharing. Marc
+Marc 's Oneway of turning Thank you Marc! I've always enjoyed turning boxes too.
Hi Carl! Very nice boxes! I like the idea of the plug for the lid, allows you to grab the lid with the jaws and even if they somehow may scuff the wood you hide it with the plug, neat! Cheers! Daniel
+Daniel Vilarino Thank you very much Daniel!
Beautiful boxes Carl. Very inspiring and I really like the way you take the time to explain everything you are doing and why. You're a very good teacher.
+Michael Anway Thank you so much Michael!
Always learn something or get inspired by your videos. Your contributions to the craft are awesome and appreciated. Cheers
Thank you very much! I really appreciate that!
Carl, I like the look of these boxes....very informative video. And really good Idea using the shelf liner to protect the inside of the box/base. Sam
Thank you Sam!
Made my first lidded box today got all the tips on your video you make it look so easy love your work
Thank you very much Robert!! I'd love to see it, thewoodshop.tv
Thanks for the informative videos and using good music that is not distracting!
Carl, another great box I miss your box making videos, more would be brilliant, I learnt and continue to learn how to make and perfect box making from you. Thanks Heaps !!!
+Stephen McFadyen Thank you very much Stephen!
Beautiful work as always! Everyone must love being on your Christmas list!
+Robert Goforth :) Thank you very much Robert!
Carl you make it look easy the paint was really cool addition.
+Black Widow Woodworks Thank you so much!
Watching videos on boxes today. Very nice box!
Thank you so much!!
Love it! Thanks for posting!
Thank you Kai
such a lovely design. I've never made anything with multiple parts, I must have a go. Thanks for sharing (a while ago!) Carl.
Thanks Matt, a great way to use up scraps too.
Great looking boxes! You taught me how to do lidded boxes and I will have to try these.
+Steve Brown Thank you very much Steve!
Beautiful boxes, and the Bach was great to go with the video :)
+Granny Soup Ladle Thank you very much!
Nice job Carl. You are a terrific artist !
+Luiz G Thank you so much Luiz!
Nice boxes Carl. I enjoyed this video and just subscribed to your channel.
Thank you very much Mike!
WOW, they came out amazing Carl
+jp woodwork Thank you very much!
Beautiful boxes Carl, and masterfully turned as always.
Take care
Mike
+Mike Waldt Thank you very much Mike!
Love your work, also how you approach your passion for creativity and turn it into a profit.....very smart...keep up the good work....look forward to more !!!
Thank you very much Stacy!
These look great and great video. My new/first lathe arrives Monday, Jet 1221 VS 12 by 21. I need to build a stand for it first. Got my basic set of tools by Scorby off e-bay and some old Witherby skew chisels - 5 different sizes. I'm excited about getting to turn again. Thanks again for you videos, you helped get started again. Scott
+The 2 Car Garage Shop Thank you very much Scott. That's awesome! Sorby are great tools I use them too.
Looks awesome Carl
+ITS A WOOD THING Thank you!
Very nice.
Very nice mate
+haralampos kouroumalos Thank you!
Beautiful boxes Carl, Great video as always,
Merry Christmas
Harry
+The Little Garden Shed Workshop Thank you Harry, and Merry Christmas!
I'm new to turning and videos like these are really inspiring. If I can get a basic box figured out, something like this is next on the list!
The hard part is going to be finding a 4x4 for the center part. I may have to just laminate a few smaller pieces.
I'm glad you're enjoying the videos! Laminating is a great way to get larger pieces.
I use to work in the Paint Dept. for Chrysler of St. Louis, MO before the plant was torn down. I use to beat the over spray off the car body carries as part of my job. Wish I would have known it was worth lots of money...LOLGreat boxes Carl.
+T-Toys & UFO's Thank you Tom! Right?! This stuff is like gold now.
Take care,
Carl
Like magic!! You make it look so easy that we forget how much skill it takes to measure, cut and turn. The dried paint looked amazing. I wish you would show closeups at the end of the finished product, hard to see so far away.
You have beautiful hands!!
+Lass-in Angeles Thank you very much.....I'll work on that :)
Beautiful job Carl. Those paint chips give the piece a cool affect. Take care and have a good weekend.
+glen mckelvey Thank you very much Glen, have a good weekend.
Hey Carl
Your right, I think it was around 05 or earlier when WS left Kelowna. It was awhile after that the the work left Kelowna for the most part. I've heard thru the grapevine that the Mexico thing didn't work out that well and some or all of the part manufacturing is returning to Portland and Ive heard some of it is back in the Okanagan.
Myself and one of the guys I used to work with at Crownwest left Kelowna in 06 and relocated to northern alberta to start our own steel fab company and it's going well. I've been watching your videos for about 18 months, since I started turning and I have learned a great deal from them as many others have I'm sure.
Thank you
Cheers
+Frank Schneider I've been out of the loop for a while now. I glad to hear some of the job might be coming back. That great, glad the move is working out for you. Thank you very much, take care.
Carl
Just watched your video "again". wish I had your wood supplier. I love boxes.
Thank you very much Jim! I find most of my own wood...but I live in Oregon, where there's a lot of trees.
I think three of your hollowing tools are worth more that my lathe!
Thanks for the video, this cleared up a few things I was wondering about.
:) Thank you Lma!!
Very nice design. I'm going to make one of these for my wife.
Thank you Larry!
Very nice projects Carl! I'm about to try something like those myself for the first time on the lathe. Good timing!
+Steve Carmichael Thanks Steve! Always looking forward to seeing what you come up with.
I have already started making this. I am going to give it to my sister for Christmas so she can put her sewing things in. Another great video Carl. 2 of my freinds have already checed you channel out and really like you.
+Gus Owen Thank you very much Gus. I'm sure she will the love the box.
very nice idea. it turned out beautifuly. Bach is my favourite composer too!
+John Walters Thank you very much John!
It was great to see you do a box again. How about doing one to show new turners, and remind older turners, how to make and use a jam chuck?
Best Wishes, Brendan.
+baconsoda Thank you Brendan! I'm going to do some more box videos soon. I'll use a jam chuck next time.
Take care,
Carl
Beautiful boxes Carl. Thank you for sharing. I love to turn boxes as well. Like the loose fit lid. I'm not a fan of the over tight ones. Ones that need a hero move to remove. I personally think it can sometimes spoil an otherwise beautifully crafted box. Ladies in the main I find love boxes but don't want to break their lovely nails trying to open them. I do think however that a good fit is very important.
An insert lid can also turn a rather plain box into something special. They can however detract if poorly chosen. A coin stuck in a beautiful burl. Iv'e seen them.
I like to put a couple of small grooves in the recess bottom before gluing in the insert. I do this to take up any excess glue preventing squeeze out, which can be unwanted and staining at times.
+Jim Robb Thank you very much Jim! I agree if the lid is to tight is just as bad as being to lose. I let them set in the house for a few day, and then adjust if I have too.
awesome carl
+James r Smith (jimmy) Thank you Jimmy!
+Carl Jacobson your welcome u are the best
+Carl Jacobson and have a awesome day today thanks for everything
A very interesting and might I say inspirational pproject.
Regards
Brian
+Brian Wolfe Thank you very much Brian!
Take care,
Carl
Great video, thanks for the inspiration. I'm in the middle of turning a box right now, so if you don't mind I'll try and incorporate one or two of your ideas 🙂
Thank you Tee!! That would be really cool, I'd love to see what you come up with.
pretty box carl! reminds me of steven kennards boxes
+Peter Matthew Thank you Peter!
Also, how do you make everything seem so easy and simple. Your such a good artist.
+Gus Owen Thank you very much Gus.
I like your work.
Thank you very much Ralph!!
Beautiful work!I just have subscribed to you.
+Dominik Guem Thank you Dominik!
carl hermoso proyecto , siempre me son utiles gracias sergio de arg
+sergio omar Ojeda ¡Muchas gracias Sergio!
great job sir! i like it :)
+NBRwoodturning Thank you!
muy buen trabajo maestro ,,,,,,,un saludo desde LEON ESPAÑA
+Santiago Arias Villaverde Estoy de acuerda, lo que hace es increíble.
+Santiago Arias Villaverde Thank you very much Santiage!
+CrazyScience Thank you!
Beautiful boxes and very well demonstrated Carl. I haven't used the paint chips you sent me because I'm terrified to turn it just incase it all goes wrong :-{
I will be looking forward to your paint chip video and will definitely give it a try after watching the master.
All the best
Tony
+oaksho Thank you very much Tony! I'll have the video up Monday.
Take care,
Carl
Nice
Thank you!
Beautiful Carl - Would CA glue effect the paint for a finish ?
Beautiful work Carl. I'm heading out to harvest more walnut and maple. This time there is manzanita and cherry too. I've never worked with manzanita is it worthwhile to get.
Take care my friend and do a kindness
Mark
+MARK Baid Thank you Mark!
That's awesome! I've worked with a little bit of Manzanita, and it's beautiful wood.
Take care,
Carl
Sandercock thanks you for a great idea. STASH BOX.
+darren wilson Tell Doug, I have them for sale :)
trés beau travail comme d'habitude
Merci beaucoup!
Great video! I really need to try making a bowl on the lathe. I was wondering how often do you need to resharpen your carbide tools? Thanks for a great informational video.
+The Russian Woodworker Thank you! I replace them about very month.
nice video,subscribed:)
+Mark Thieme Thank you Mark, and thanks for subscribing.
Gee Carl, i just started watching your video's a few days ago. I'm new to turning. just a couple of days ago i watched you get your new Delta and now you've got a Robust. Your movin up. Same great work and i'm leaning alot, thanks. BTW , what did you do with the Delta. Also i like the way you held the box on the smaller jaws with the non skid cloth. Can you tell me the name of those jaws, thanks.
+mbiraside lol Time fly's when you're having fun ;) I sold the Delta a while ago to help pay for the Robust. The jaws are called "Needle nose" or "long nose"
Take care,
Carl
nice box, do you turn pepper mills? maybe out off the spectraply colored plywood
+Rj Leggett Thank you Rj, yes I have a couple pepper mill videos up. Here's a link to one, th-cam.com/video/nEs9cKsh4XI/w-d-xo.html
Veery nice inspiration! Great work. what is the rpm for the hollowing ? and also general question for the speed (rpm) vs diameter with the carbid and hss steel gauge. thx
Thank you very much!! I normally turn between 2000 and 2,500 rpm It's the same for carbide or the gouges.
great Video Carl you have helped me with my turning. I have one question, what are you using with your finish sanding? I notice you dip the sandpaper into some kind of liquid. Just wondering what you use.
+Bill Dixon Thank you very much Bill! I'm using Howard bees wax and orange oil.
у меня нет слов от этих произведений
+Никита Струин Thank you!
beautiful work
what oil are you using when you sand
+gulfmedic1 Thank you! I use Howard beeswax and orange oil.
I enjoy viewing your videos. What truck plant did you work in?
Thank you William! I worked at the frightliner plant in Portland OR.
love it and love the music! Is that oily sand paper or what is it? x
Thank you, I sand with Walnut oil.
carl, once again nice piece, well done my friend. i'd still like to know if you can finish with any thing over the mineral oil and wax mix or is wax my only option?
+hubie hubco Thank you very much Hubie! You can use a friction polish over it.
Take care,
Carl
Were you using the full size or mid size Easy Wood tools?
The mid size EWT
Carl where can I find some of your turned box,s for sale. Please send a link. Thanks
PS I really enjoy your videos. Who knew you were a truck salesman in a former life.
Thank you!
I only have one up for sale right now www.etsy.com/shop/Thewoodshoptv
Master Bach.Brandenburgisches Konzert.great.
I've watched a couple of your box videos. What finish are you sanding with?
This was Howard amzn.to/2wI1NBl but I now use Doctor's Woodshop Walnut oil.
A couple of questions. Are you mixing boiled linseed oil and wax? If so, what are the ratios? Also, are you dipping the sandpaper into a mix and doing 2 operations at the same time?
I sand with Howard bees wax and orange oil (it's pre-mixed) or Doctor's Walnut oil. It cuts down on the sanding dust, and puts the finish on at the same time.
As usual an awesome demo. Just curious, which truck manufacturer did you work for? I used to work for a company in British Columbia which made Western Star truck parts and we also made frame rails for KW. Thanks again for the ideas
+Frank Schneider Thank you Frank! I worked for Freightliner for 20 years. They moved the WS manufacturing down to Portland I think in 2005
Take care,
Carl
Carl what chuck do you have? Or what one would you recommend
+will fleming Hi Will, I have the Easy Wood Chuck!
Carl, I just got a lathe this past weekend and skat love it more than any of my other tools! I have a few pieces of purple heart (1x1x18) any ideas of what I could turn?
Also, I really enjoy your channel
+Bryan Schultz Thank you very much Bryan! That's awesome! Those would be perfect for pens, or maybe some wands.
Plz do more video like this but what type of tools do I use??
I use Easy Wood tools, here's a link. www.easywoodtools.com/
great job, they look amazing! I want to try but this is impossible without a chuck right??
Look up jam chucks. Basically you can turn a piece of scrap wood to hold the piece you're turning
Robert Goforth Thank you!
+knives&stuff Thank you Maarten! I'll do a box video after Christmas with out a chuck.
I don't see a link to your ebay store, did you get rid of it? Those boxes came out really nice Carl!
Thank you!! Here's a link :) www.indiegogo.com/projects/tw-js3-jig-easy-set-up-for-compound-angle-cuts#/
@@CarlJacobson Hey Carl, that link isn't to ebay but some dude named Matt.
Does the linseed oil and wax not dry out your skin?
I sand with Howard bees wax not linseed oil. www.amazon.com/dp/B001BKQYGW/?tag=aiponsite-20&linkCode=ic5&ascsubtag=amzn1.idea.19UHANL5L5N2J&creativeASIN=B001BKQYGW&cv_ct_id=amzn1.idea.19UHANL5L5N2J&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodshoptv_dp_vv_d
Carl, could you do the same on a much larger scale to hold knitting needles?
+Kat Gore Yes that's a good project idea.
does anything ever get sucked in vacuum?
+Bill Binnicker Yes I've lost a few lids, and some sand paper :)
What did you use to sand and finish this? Thanks!
I use Howard beeswax astore.amazon.com/thewood0c-20/detail/B00DKWRNZ0
enjoy your instructions and woodturning but is there any way of turning the music off in the background? love listening to the chisel /gouge eating its way into the wood but I'm probably the only listener asking. Ps. are you hearing the same music as you turn the piece?
Thank you! I listen to Pandora and the music has a copyright and I can't play it on the video :(
Whats the brand of the parting tool you used in this video?
It's a Easy Wood parting tool. www.easywoodtools.com/easy-parting-tool-products-page/
How do you determine pricing for turning. I've just started and was curious. I can't seem to find any really definitive answer on it. I know wood and so on counts.. but is there pricing per inch?
Hi Ray, I add up all the materials I used and my time. Boxes like this I sell for around $75
@@CarlJacobson ty for the video and the reply. Very informative!! Beautiful box!
Oh No! where is the squeaky Delta?
Hahaha
How do I get the turning thingy
I turn with a Robust lathe, here's a link. www.turnrobust.com/
what do you get $ for your boxes?
You would what?