Hi Sparkle I'm From New Orleans as well.. Hey I love making some beautiful Jewelry.. I'm Newbie to it.. I'm so Glad Found Someone that does Live in my State to Support..
Thank you for this tutorial! I have been tumbling local beach stones and agates to make pendants. As well as bone jewelry 😁. But I wasn’t happy with wire wrapping results. This is going to make all the difference!
First, thank you for this superb tutorial. I learned so much and am totally psyched to do this. So glad I found your channel and look forward to watching your other videos.
You're amazing 😭😭😭 thank you so much for this! I have been watching so many tutorials but this one has taught me the most and answered every question I have! THANK YOU!❤
Thank you for this well done tutorial. I learned a lot and am totally psyched to try this. Glad that I found your channel and look forward to your other content.
That's awesome! I'd love to see them when you are done. The spray I used is called kwik-clean and is make to clean off flux. I use it a lot for stained glass but you can use just use soap and water if you don't want to spend the money on it.
you have the BEST tutorial videos!! Every single one is so thorough and there is such a variety of projects!! Fantastic, love it. Does the copper tape not peel off? Mine does when I pick at it....
This is so awesome. What temperature do you set your iron to? I have areas where the solder stays really rough, if I turn the iron up it burns and i get little black pieces all over my project.
Sort of! There is stuff called Patina that you can buy that can change the silver to a copper color but it has to be super clean. I guess you could also gold plate it but that's a whole other project that is pretty expensive to do. here is a link to the copper patina. www.amazon.com/Super-Brite-Copper-Patina-Solder/dp/B000N64PDE/ref=sr_1_2?dchild=1&keywords=copper+patina&qid=1618599469&sr=8-2 I'm going to make a video about it soon!
and does the solder have to be sterling silver, i understand it’s better quality but could u recommend a cheaper alternative? thankyou! :) love your videos
Would love your advice on how to keep my copper tape from not lifting!! I have soldered many pieces (practicing like crazy), and often the tape seems like it could just be pulled off when I am done. I'm using quality copper tape and experiment soldering on bones and gems. I go over tape with flat wood blade before soldering. (forgot the word for that). Each time this seems to happen. When I am done, I can literally pull the soldering off. HELP please. :))
@@ryannkramer8673 no not really...but I read black back copper tape is supposed to be the strongest/stickiest so I am trying that out. It does seem to adhere better. Also I am making sure to clean piece first with acetone first to remove all residue. This helps too. And I use an agate stone to burnish which gives the tape a smooth finidh.
@@ryannkramer8673 sorry I should have answered that differently. On most pieces I am having more success doing what I suggested. Only on occasion do I still have trouble getting tape to adhere smoothly.
I will try this. Your good at explaining the process....clear and concise.
Hi Sparkle I'm From New Orleans as well.. Hey I love making some beautiful Jewelry.. I'm Newbie to it.. I'm so Glad Found Someone that does Live in my State to Support..
bro how does she not have more suscribers
Thank you!!
Sparkle Thank You so much, Truly Appreciate You For Sharing.. I'm here for it.. Thank You again
Totally agree!! I’m so glad I found this video - I’ve been looking for tutorials but this so far is the best.
I'm so glad!! If you try it let me know how your project turns out!
Thank you so much! THIS is the exact type of tutorial I like! Easy to follow and doesn't make it seem intimidating. And I absolutely love your vibe!
You need way more subs! The quality and info u relay is amazing
Thanks so much! I'm new so its not shocking
Thank you very much! Is there a possibility to give them a gold colour?
Great simple video!! Thank you!
Glad you liked it!!
Your solder is so clean looking. Good job! Also, love your hair color and earrings. Super pretty.
This was great thank you!
Thank you for this tutorial! I have been tumbling local beach stones and agates to make pendants. As well as bone jewelry 😁. But I wasn’t happy with wire wrapping results. This is going to make all the difference!
Thank you so much. Gonna give it another try again. This video is one of the most helpful one I’ve seen! ❤️
Awesome! Let me know how it turns out!!
You make it look easy. But I’m sure it takes skills thank u 🙏
That is awesome! Thanks for the content!
First, thank you for this superb tutorial. I learned so much and am totally psyched to do this. So glad I found your channel and look forward to watching your other videos.
I cannot thank you enough! This tutorial is amazing ❤️
I'm so glad you found it helpful!
You're amazing 😭😭😭 thank you so much for this! I have been watching so many tutorials but this one has taught me the most and answered every question I have! THANK YOU!❤
Thank you for this well done tutorial. I learned a lot and am totally psyched to try this. Glad that I found your channel and look forward to your other content.
Thank you so much! I cant wait to see what you make!
Thank you ❤
This has really inspired me to give it another go! Do you mind me asking what was in the spray you used at the end?
That's awesome! I'd love to see them when you are done. The spray I used is called kwik-clean and is make to clean off flux. I use it a lot for stained glass but you can use just use soap and water if you don't want to spend the money on it.
you have the BEST tutorial videos!! Every single one is so thorough and there is such a variety of projects!! Fantastic, love it.
Does the copper tape not peel off? Mine does when I pick at it....
Thank you so much! I try really hard to make everything as clear and easy to understand as I can!
this is so helpful :)
I'm glad it helped!
What’s that flattening tool you used lol I don’t want to use a butter knife lol
Its called a fid! You can find them from any stained glass supplier or amazon
This is so awesome. What temperature do you set your iron to? I have areas where the solder stays really rough, if I turn the iron up it burns and i get little black pieces all over my project.
I keep mine up between 700 and 800. Don't worry about the little burn spots, they will wash off when you clean and polish the piece.
Is there a way to do this with a gold finish??
Sort of! There is stuff called Patina that you can buy that can change the silver to a copper color but it has to be super clean. I guess you could also gold plate it but that's a whole other project that is pretty expensive to do.
here is a link to the copper patina.
www.amazon.com/Super-Brite-Copper-Patina-Solder/dp/B000N64PDE/ref=sr_1_2?dchild=1&keywords=copper+patina&qid=1618599469&sr=8-2
I'm going to make a video about it soon!
So a i should be able to do this straight onto copper wire? I'm guessing this because it adheres to the copper tape.
If i want soldier glass pendant, I like gold color look what do i use
Can you do it without the copper type?
nope! the copper tape is what bonds the crystal and the solder, without it, the solder will not stick to the crystal/bone/glass
My girlfriend and I have so many bones we wanted to make stuff out of thank you
How do you solder a gold or copper color
How do you do this in gold? I’m not a big fan of the silver
Nice 🇮🇳 work
How do you get gold color soldier on pendant?
What do you use to clean your solder after you get it done?
I use some cleaner called Kwik clean but its kind of expensive. Dish soap and warm water also work pretty well.
could i use a solder paste in replace of the flux and solder wire?
and does the solder have to be sterling silver, i understand it’s better quality but could u recommend a cheaper alternative? thankyou! :) love your videos
I'm not sure since I have not used solder paste myself but it might be worth experimenting with since you can practice on cheaper materials.
I just used lead free solder (I believe its mostly tin) that you can find for cheap on amazon. you don't need to buy silver solder for this project.
Where did you get those earrings???
Hi! Can you use copper wire instead of the silver toned one?
Hey when you say you can use silver foil tape do you mean aluminium tape ?
Would love your advice on how to keep my copper tape from not lifting!! I have soldered many pieces (practicing like crazy), and often the tape seems like it could just be pulled off when I am done. I'm using quality copper tape and experiment soldering on bones and gems. I go over tape with flat wood blade before soldering. (forgot the word for that). Each time this seems to happen. When I am done, I can literally pull the soldering off. HELP please. :))
Did you ever figure this problem out? I’m having the same issue!
@@ryannkramer8673 no not really...but I read black back copper tape is supposed to be the strongest/stickiest so I am trying that out. It does seem to adhere better. Also I am making sure to clean piece first with acetone first to remove all residue. This helps too. And I use an agate stone to burnish which gives the tape a smooth finidh.
@@ryannkramer8673 sorry I should have answered that differently. On most pieces I am having more success doing what I suggested. Only on occasion do I still have trouble getting tape to adhere smoothly.
👏👏👏👏👏💜💜💜💜💜💜💜💜💜💜
Can you solder any Crystal?