I am a stained glass artist, have done it for 25 plus years and just when I thought I couldn't learn anything new I came across your video's! I love this technique and will be experimenting with it, so clever using the rubber stamps! Well done, instructions are precise and clear. Thank you for sharing!!
same here. The last partly new technique with stamps was like 10 years ago. And I know all about stamps! But this is new... its like adrenalin and happyness at once, I love this idea!
Like Linda Lombardo I am stunned... I work in the craft industry for many years and I am focused on all stamping techniques. I DID something similar with seal wax and with embossing powder, but would NEVER have thought oif this!!! Oh, and I havent seen a new stamping technique for like 10 years and thought I never will. You made my day!!! I will definetely try this and make german videos about it, and send them here where the I saw the technique first. Thank you!!!
I came across your blog and book several years ago and tried stamp soldering using some borrowed stamps, a torch and some random solder kit. Most of my trials flopped but I vowed to try my hand at it again once I bought a soldering rod. Just a week back I thought of finally buying a soldering iron to make some glass pendants and was wondering if I need another tool. Coincidently you posted this video. Thank you for the inspiration as it once again opens up possibilities.
Yes you really just need a soldering iron (buy a high watt one, 80 or 100 watts, not of very low $20 40 watt ones), lead free solder - roll solder works great, as I use in the video, and flux.
@@LauraBethLove Thanks Laura. I bought a 75Watt iron and paste flux as that is what is available to me locally and tried it. I could stamp solder easily but however hard I try I am not able to get the solder to glide on the wire like you show. The solder melts on touch of iron but when I put it on the wire, it just globs up. I tinned the tip before I started and cleaned with a wet sponge in between but now it looks black and crusty. I don't know what I am doing wrong. Any help would be much appreciated! Thanks
@@JewelsofSayuri What kind of wire are you using? Try cleaning the wire like I demonstrate in the video. Some craft wires that you buy are coated with kind of a sealant or thin coating of plastic so make sure your wire is not coated. Do you have my book Boho Chic Jewelry? That has lots of information on soldering and I would start there if you haven’t read it.
@@LauraBethLove Thanks, yes I have Boho chic jewellery. I used clean bare copper wire. Maybe my solder is old but my tip isn’t melting solder nor is it staying tinned. it gets crusty. I'll try cleaning with sal ammoniac.
You should get some emery cloth to tackle sharp edges. It's like a fine sand paper on a thick cloth backing, instead of paper, that you can easily tear to whatever size you want to work with. I find it much easier to work with & longer lasting than cheap emery boards/nail files. You can get it in sheets or rolls of it, which work out far cheaper than even your dollar store buys for what you actually get.
@@LauraBethLove my pleasure, I hope it helps. Emery cloth can generally be used dry or wet, it can prove very useful if you end up with ingrained black on your hands, for whatever reason, using the emery cloth, in a bowl of hot water, as an exfoliator with plenty of soap!
You can use any type of torch for this as well, but for a small project such as this it's kind of overkill unless you are heating a large surface area. A higher watt soldering is perfect for the job. I'll talk about that a bit in my next video.
Yes, you can find some here (it does not matter whether they are wood mounted or not as long as they are red vulcanized rubber) www.amazon.com/shop/laurabethlove/list/29PA2CFO82747?tag=onamzdishfund-20&ref_=aip_sf_list_spv_ofs_mixed_d
Intriguing technique and the results are wonderful!! Thank you Beth. Bought your Boho Jewellery book and just getting into this artform. Look forward to seeing how you use these frames in jewellery pieces. TFS!!
Thanks so much for sharing your knowledge. I'm looking forward to trying this. I have stamped solder that I floated onto a flattened spoon bowl and used the top of a red rubber tree stamp. It looked so much like what tooled leather looks like. It was beautiful. Looking forward to seeing how you use these.
Thanks Liz, and that sounds like a project from my first book, Boho Chic Jewelry! www.amazon.com/BoHo-Chic-Jewelry-Timeless-Soldering/dp/1440238162/ref=sr_1_1?ie=UTF8&qid=1378259730&sr=8-1&keywords=boho+chic+jewelry
Love the look of this tech. Haven't tried it yet, but I think it may be easier if done on a heat resistant baking sheet (aka non-stick craft sheet). Wouldn't stick to the paper it's on top of or get the woodgrain on the back side. Anxious to give this technique a try (after we get moved & I unpack). TFS!
I'm not a fan of those non-stick mats...I've tried them (and actually I think I used one in one of my DVD workshops) and they just aren't my thing! I guess it just comes down to personal preference. Whatever works!
This technique is from my first book, Boho Chic Jewelry: 25 Timess Designs Using Soldering, Beading, Wire Wrapping and More (published in 2013, Penguin Random House)
I learned so many things and am so inspired by your art. I tried this rubber stamp technique and the solder melted the stamp. I can't find information about what temperature is appropriate.
Thank you! ...It's not the temperature, its the type of rubber stamp - you must use a RED stamp, make sure its not clear, orange, or brown. Hope this helps!
Hi Laura, thanks so much for sharing….loved your video. I’m very keen to try this but having trouble finding any red rubber stamps. Are you able to provide any advice on places to purchase (online)
Sure, Ebay has lots of them, you just have to do a little digging, just be sure the are the red type and not the clear or the brownish type. I bought mine unmounted in sheets that you cut apart yourself.
Also having a problem finding the right stamp. I found red stamps on Amazon and my solder sets solid very quickly or my stamp melts. Climbing the walls here, I’m in love with this look. Waiting for my book to arrive. You make it look so easy 😢
@@TXLPEelle ne donne pas la bonne réponse n’acheter pas ses tampon rose ou autre car ils sont en plastiques ou silicone ils fondent 🥺 elle dit qu’il faut creuser pour trouver 😂sérieux!!! Toujours pareille les tutoriels ils ne donnent pas les informations essentielles, moi je cherche partout et je ne trouve pas!! Elle parle de caoutchouc vulcanisé mais ont en trouve nul part… elle ne donnera l’adresse où les acheter 🤗 courage si je trouve je vous dirai où acheter 😉 Moi j’attends toujours sa réponse ou plutôt je n’attends plus 😂😂😉
I've just recently tried stamping into my solder and love the look. You're definitely encouraging me to try even more techniques. Thank you for that. Can you tell me what the polish was that you used? (I often just use a paste wax. but yous looked more professional.) Thanks, again!
I have a new soldering book for beginners coming out soon, stay tuned to my channel and I will announce when on the channel once I know the release date (will be before the holidays.)
Laura, what is the best temp to set the rheostat? Do you just experiment until you find the best temp to allow the imprint? Also, I am from PA and made many trips up to Warner Crivallero near Bethlehem. I knew Mr Crivallero who had a cheese company there as well. He sold me my first light box for glass cutting. It now is Warner Glass. I lived in Chester Springs, in Chester County. Best Regards. Louise Del Negro
I just watched your video, never seen any thing like this. I have started an ebay store in May, I am interested in making pieces, but I was wondering, several years ago I purchased a wood burning kit, never used it. Is that something I could use to make these projects? I guess I need to locate it and give you specs on it or if you could tell me wattage then I could look on mine to see if it is similar.....Am I being a pain? Shoot!
Hi, no you would need to use a soldering iron. I'll be doing some blog posts and videos in the future about that. Remember, you need the right tool for the job!
Sure I don't see why not, as long as you use lead-free solder...I have a soldered ring project in my 2nd book, Soldered Alchemy, and also a short tutorial on my blog
I am curious as to what temperature on the soldering iron I should use. Mine is only a 60 watt iron, I hope this works, but at least you can set the temperature, thoughts? Also I am seeing solder come in all types of guages, temperature melts. Does the temperature melt of the solder dictate temperature setting on the iron? If so,, what do I need to know about that? Thank you! ; - )
Yes - if you are new to low-temp soldering you should check out my book Boho Chic Jewelry, as I explain a lot in detail there. But yes, it has all to do with the the metals and their melting points. Low-temp soldering is for metals that melt at a lower temp, some people call it soft soldering but I prefer the term low-temp. You can try the iron with lead-free solder but you may need at least an 80 watt, again it depends on the solder. Good luck!
Can you do decorative soft soldering onto a 925 ring? I've seen designs that I just can't work out if it's soft wax shapes on hard wax or soft soldering. Secondly could you get this same effect buy directly melty silver wire?
low temp and high temp solders and material are two very different beasts - you can do soft solder on sterling but not vice-versa and the joint or repair would not be stable...the soft solder would contaminate the sterling, it would no longer be called sterling silver due to the soft solder: I would keep them separate!
Hi im new to this and what im confused about is why sodering wire just calls itself soderinging wite without including what kind of metals are in it for my customers to know
Hi Dianne, I have links to what you need in the description below the video! They have to be vulcanized rubber stamps which are commonly the older red type.
is there such a thing as .925 solder wire that you can use a hot pen to melt? or can silver only be torched? does anyone know!! i'm horrible at finding answers via google
I just tried lead free solder for the first time and I have questions! I'm getting a sticky brown residue on stuff. Is it the flux? I don't have that problem with 60/40 or 50/50. Is it trash in the solder? I'm using bead landing brand. It also fouls my tip. What's going on? Also it smokes like CRAZY!
My newest book, The Broken China Jewelry Book, will be available on Amazon in late July/early August! Be sure to get your copy! tinyurl.com/4ffrm4ys
You are a great teacher. Concise, detailed, and to the point. Thank you.
I am a stained glass artist, have done it for 25 plus years and just when I thought I couldn't learn anything new I came across your video's! I love this technique and will be experimenting with it, so clever using the rubber stamps! Well done, instructions are precise and clear. Thank you for sharing!!
Thanks Linda!
same here. The last partly new technique with stamps was like 10 years ago. And I know all about stamps! But this is new... its like adrenalin and happyness at once, I love this idea!
Like Linda Lombardo I am stunned... I work in the craft industry for many years and I am focused on all stamping techniques. I DID something similar with seal wax and with embossing powder, but would NEVER have thought oif this!!! Oh, and I havent seen a new stamping technique for like 10 years and thought I never will. You made my day!!! I will definetely try this and make german videos about it, and send them here where the I saw the technique first. Thank you!!!
Thanks for watching, glad you enjoyed the video and hope it inspires you to create!
OMG! WHAT A BRILLIANT TECHNIQUE! I just added a WHOLE NEW world to my jewelry making! THANK YOU - AWESOME VIDEO!
You're very welcome! I'll have more soldering & jewelry videos coming up so be sure to check back.
Wow i can use this technique to give complexity to my resin jewelry 🌻
I am learning so much from your videos!
Great! Thanks for watching!
Absolutely gorgeous and ingenious. Thank you so much for sharing your craft.
I came across your blog and book several years ago and tried stamp soldering using some borrowed stamps, a torch and some random solder kit. Most of my trials flopped but I vowed to try my hand at it again once I bought a soldering rod. Just a week back I thought of finally buying a soldering iron to make some glass pendants and was wondering if I need another tool. Coincidently you posted this video. Thank you for the inspiration as it once again opens up possibilities.
Yes you really just need a soldering iron (buy a high watt one, 80 or 100 watts, not of very low $20 40 watt ones), lead free solder - roll solder works great, as I use in the video, and flux.
@@LauraBethLove Thanks Laura. I bought a 75Watt iron and paste flux as that is what is available to me locally and tried it. I could stamp solder easily but however hard I try I am not able to get the solder to glide on the wire like you show. The solder melts on touch of iron but when I put it on the wire, it just globs up. I tinned the tip before I started and cleaned with a wet sponge in between but now it looks black and crusty. I don't know what I am doing wrong. Any help would be much appreciated! Thanks
@@JewelsofSayuri What kind of wire are you using? Try cleaning the wire like I demonstrate in the video. Some craft wires that you buy are coated with kind of a sealant or thin coating of plastic so make sure your wire is not coated. Do you have my book Boho Chic Jewelry? That has lots of information on soldering and I would start there if you haven’t read it.
@@LauraBethLove Thanks, yes I have Boho chic jewellery. I used clean bare copper wire. Maybe my solder is old but my tip isn’t melting solder nor is it staying tinned. it gets crusty. I'll try cleaning with sal ammoniac.
@@JewelsofSayuri Sounds like you may need to replace the tip, if cleaning doesn't work.
You should get some emery cloth to tackle sharp edges. It's like a fine sand paper on a thick cloth backing, instead of paper, that you can easily tear to whatever size you want to work with. I find it much easier to work with & longer lasting than cheap emery boards/nail files. You can get it in sheets or rolls of it, which work out far cheaper than even your dollar store buys for what you actually get.
Thanks for sharing that tip!
@@LauraBethLove my pleasure, I hope it helps. Emery cloth can generally be used dry or wet, it can prove very useful if you end up with ingrained black on your hands, for whatever reason, using the emery cloth, in a bowl of hot water, as an exfoliator with plenty of soap!
Hi Laura. It doesn't mention in your book whether the solder will tarnish if it is not sulfered??? I rather like the shiny silver look ! x
You can use any type of torch for this as well, but for a small project such as this it's kind of overkill unless you are heating a large surface area. A higher watt soldering is perfect for the job. I'll talk about that a bit in my next video.
Hi there. Can you tell me where I can get the stamps that you’re using? I’ve only been able to find the once that are attached to wood or something
Yes, you can find some here (it does not matter whether they are wood mounted or not as long as they are red vulcanized rubber) www.amazon.com/shop/laurabethlove/list/29PA2CFO82747?tag=onamzdishfund-20&ref_=aip_sf_list_spv_ofs_mixed_d
Intriguing technique and the results are wonderful!! Thank you Beth. Bought your Boho Jewellery book and just getting into this artform. Look forward to seeing how you use these frames in jewellery pieces. TFS!!
Glad you enjoyed the video, thanks for watching!
What a great video on how to do everything, so easy to follow. Thank you.
Thanks so much for sharing your knowledge. I'm looking forward to trying this. I have stamped solder that I floated onto a flattened spoon bowl and used the top of a red rubber tree stamp. It looked so much like what tooled leather looks like. It was beautiful. Looking forward to seeing how you use these.
Thanks Liz, and that sounds like a project from my first book, Boho Chic Jewelry! www.amazon.com/BoHo-Chic-Jewelry-Timeless-Soldering/dp/1440238162/ref=sr_1_1?ie=UTF8&qid=1378259730&sr=8-1&keywords=boho+chic+jewelry
Thank you for sharing you talents.
You are very welcome, thank you for watching!
I m love your videos . Thank you .
Love the look of this tech. Haven't tried it yet, but I think it may be easier if done on a heat resistant baking sheet (aka non-stick craft sheet). Wouldn't stick to the paper it's on top of or get the woodgrain on the back side.
Anxious to give this technique a try (after we get moved & I unpack). TFS!
I'm not a fan of those non-stick mats...I've tried them (and actually I think I used one in one of my DVD workshops) and they just aren't my thing! I guess it just comes down to personal preference. Whatever works!
This technique is from my first book, Boho Chic Jewelry: 25 Timess Designs Using Soldering, Beading, Wire Wrapping and More (published in 2013, Penguin Random House)
Wow nice. Thanks Laura 👏🏽👏🏽👏🏽👏🏽👏🏽🌸💐
Thanks for watching!
Those are beautiful reminds me of art nouveau
I learned so many things and am so inspired by your art. I tried this rubber stamp technique and the solder melted the stamp. I can't find information about what temperature is appropriate.
Thank you! ...It's not the temperature, its the type of rubber stamp - you must use a RED stamp, make sure its not clear, orange, or brown. Hope this helps!
Hi Laura, thanks so much for sharing….loved your video. I’m very keen to try this but having trouble finding any red rubber stamps. Are you able to provide any advice on places to purchase (online)
Sure, Ebay has lots of them, you just have to do a little digging, just be sure the are the red type and not the clear or the brownish type. I bought mine unmounted in sheets that you cut apart yourself.
@@LauraBethLove thanks for the quick response. I’ll do some digging😃
Also having a problem finding the right stamp. I found red stamps on Amazon and my solder sets solid very quickly or my stamp melts. Climbing the walls here, I’m in love with this look. Waiting for my book to arrive. You make it look so easy 😢
@@TXLPEelle ne donne pas la bonne réponse n’acheter pas ses tampon rose ou autre car ils sont en plastiques ou silicone ils fondent 🥺 elle dit qu’il faut creuser pour trouver 😂sérieux!!! Toujours pareille les tutoriels ils ne donnent pas les informations essentielles, moi je cherche partout et je ne trouve pas!! Elle parle de caoutchouc vulcanisé mais ont en trouve nul part… elle ne donnera l’adresse où les acheter 🤗 courage si je trouve je vous dirai où acheter 😉
Moi j’attends toujours sa réponse ou plutôt je n’attends plus 😂😂😉
I've just recently tried stamping into my solder and love the look. You're definitely encouraging me to try even more techniques. Thank you for that. Can you tell me what the polish was that you used? (I often just use a paste wax. but yous looked more professional.) Thanks, again!
Hi Hope! It's just 100% Carnauba wax, that's it!
@@LauraBethLove Thanks so much!
Hello. Thanks for you videos. What do you call this process or technique?
Beautiful ❤
I absolutely Love Love your video. How can I do learn? I have so many man ideas on creating or recreating Jewlery
I have a new soldering book for beginners coming out soon, stay tuned to my channel and I will announce when on the channel once I know the release date (will be before the holidays.)
I want to add some crystals in corners or between them, how can we add crystals?
Laura, what is the best temp to set the rheostat? Do you just experiment until you find the best temp to allow the imprint? Also, I am from PA and made many trips up to Warner Crivallero near Bethlehem. I knew Mr Crivallero who had a cheese company there as well. He sold me my first light box for glass cutting. It now is Warner Glass. I lived in Chester Springs, in Chester County. Best Regards. Louise Del Negro
Since all irons are different, yes, you answered it yourself, you just have to experiment until you find what works for you!
I love these! ❤️
WOWZER
I just watched your video, never seen any thing like this. I have started an ebay store in May, I am interested in making pieces, but I was wondering, several years ago I purchased a wood burning kit, never used it. Is that something I could use to make these projects? I guess I need to locate it and give you specs on it or if you could tell me wattage then I could look on mine to see if it is similar.....Am I being a pain? Shoot!
Hi, no you would need to use a soldering iron. I'll be doing some blog posts and videos in the future about that. Remember, you need the right tool for the job!
Can you make rings with Soldering iron? 🌸
Sure I don't see why not, as long as you use lead-free solder...I have a soldered ring project in my 2nd book, Soldered Alchemy, and also a short tutorial on my blog
I am curious as to what temperature on the soldering iron I should use. Mine is only a 60 watt iron, I hope this works, but at least you can set the temperature, thoughts? Also I am seeing solder come in all types of guages, temperature melts. Does the temperature melt of the solder dictate temperature setting on the iron? If so,, what do I need to know about that? Thank you! ; - )
Yes - if you are new to low-temp soldering you should check out my book Boho Chic Jewelry, as I explain a lot in detail there. But yes, it has all to do with the the metals and their melting points. Low-temp soldering is for metals that melt at a lower temp, some people call it soft soldering but I prefer the term low-temp. You can try the iron with lead-free solder but you may need at least an 80 watt, again it depends on the solder. Good luck!
@@LauraBethLove thank you!
Can you do decorative soft soldering onto a 925 ring? I've seen designs that I just can't work out if it's soft wax shapes on hard wax or soft soldering. Secondly could you get this same effect buy directly melty silver wire?
low temp and high temp solders and material are two very different beasts - you can do soft solder on sterling but not vice-versa and the joint or repair would not be stable...the soft solder would contaminate the sterling, it would no longer be called sterling silver due to the soft solder: I would keep them separate!
Hi im new to this and what im confused about is why sodering wire just calls itself soderinging wite without including what kind of metals are in it for my customers to know
Which liquid flux are using for this project? Thanks!
Just generic stained glass flux.
Hi there,
Can we use any rubber stamp or does it have to be the brand red stamp? Tyia
Must be vulcanized rubber
Where do I get the rubber stamps? The only place I saw them was on Etsy and the seller didn't know if they would hold up to hot solder.
Hi Dianne, I have links to what you need in the description below the video! They have to be vulcanized rubber stamps which are commonly the older red type.
is there such a thing as .925 solder wire that you can use a hot pen to melt? or can silver only be torched? does anyone know!! i'm horrible at finding answers via google
No you would need a torch
I just tried lead free solder for the first time and I have questions! I'm getting a sticky brown residue on stuff. Is it the flux? I don't have that problem with 60/40 or 50/50. Is it trash in the solder? I'm using bead landing brand. It also fouls my tip. What's going on? Also it smokes like CRAZY!
I talk about that in a few of my videos so be sure to check out my jewelry making playlist - make sure your metal is clean before soldering 🌼
@@LauraBethLove which videos in particular? Not that I don't love you but I don't want to watch them all looking for that info 😜😘.
My red rubber stamps have been melting a bit. Any idea why that is happening?
Must be vulcanized rubber
laurabethlove.podia.com/
Hi Laura Beth,
Do you ever use copper solder?
I use only lead-free silver alloy solder but you can apply a copper colored patina to the silver and give it a copper finish!
Seriously struggling to find any red rubber stamps, everything is the clear silicone stuff
There is a link in the description to one as well
How do you use these?
Find Part 2 of this video here! th-cam.com/video/0rOiJbmOTE0/w-d-xo.html
*Find Part 3 of this video here! th-cam.com/video/dKEv3v7NwEI/w-d-xo.html
anyone know why some people in the US pronounce solder as sodder?
it sounds so strange to me - regional pronunciation differences are fascinating
In the US we don't pronounce the L! (/ˈsädər/) I think it sounds odd when I hear someone from the US say soul-der! You're right, it is interesting.