I'm so glad I for some reason I held out and watched to the end. it's a must. I'm still laffing at the pure bass test. they must have been fighting over it, understandably of course. if I'm honest I'm a bit pissed that I missed out
Hey there. Am a new subscriber here first day. I have a question. I have JEC 600 amp. Am sure you know its specs since its an old engine. I also have one cliff design 4ohm 500rms 1000watts subwoofer which is double coil. Please help me how to wire the two coils to get the best out of it. The equaliser is boschman
Hi. I just installed a sony xplód cd player. i want to hook up an amp and sub. How do i make it so just the amp is supplying bass to my sub while the speakers are still just powered by the head unit? is this possible? thanks.
For the general population I would say to have your setup professionally done in a shop. I call this style "Shade Tree". Park under a shade tree and see what happens.
I have the Sony Xplod amp hooked correct but no sound is coming from my 12" subs and I tested to see if the sub was blown and it wasn't I need help with this problem.
HI, Do you have the speaker bridged? if so make sure it is bridged correctly, if not make sure to try both the right and left side of the speaker connections. Another reason could be the remote, if you have no power going to the remote the amp will not be on. Make sure the settings on the left side are correct, the knob turned all the way to the right, and the switch should be good on either the right or left setting. Check the fuses, sometimes if you connect an amp and accidentally touch a wire to another it will shoot the fuse and you will never know. Finally make sure the audio going to the amp it turned up enough to hear the sound. there are two options to regulate sound, the sound coming from the RCA and the sound coming from the amp to the speakers, make sure they are both turned up. Finally, make sure the light on the amp is coming on. Let me know what you find out.
Dillon Watt, no. you need a power source that activates when the car turns in. if you have it hooked directly to the battery it will not go off unless you have a on/off switch on the power line.
When you bridge a car amplifier your taking all the rms power from the car amplifier at any impedance you have your speakers or car subwoofers wired at for an example a 1000 watt sony xplod car amplifier puts out 1000 watts rms in bridged mode at any impedance
i have a problem with my car audio system.. when i turn on my stereo my sub pops and when i turn the volume to 00 pop and volume to 01 pops what is the problem pls
Dylan Mamo something is turned too high. Maybe your amp is up on the highest setting. Your stereo probably goes from 0-50 with the volume. If you only operate within the first 10 numbers of the 50 you may want to turn the amp down some. The pop is a signal that the electronics are receiving to run on and off. 00 is essentially off, 01 is on.
In Daily Life Have Fun so i put the amp volume settings all down from the amp it self andni see if it make it.. so ppl told me that i can be the remote wire?
I'm running my amp off of a stocked car system to power my woofer can anyone tell me how to hook the door speakers up to make the woofer work properly?
WARNING: DO NOT USE SPEAKER WIRE OR PRIMARY WIRE TO POWER YOUR AMPLIFIERS.THIS WILL CAUSE AN UNDERPOWERMENT AND WILL END UP BLOWING DUE TO NOT RECIEVING ENOUGH POWER.
Shane Edwards remote and ground. Remote is what will tell the amp to come on. You'll need 12v power to that. On the back side of stereos it has a remote hookup. You can hook it directly to the batter, if you hook directly you'll need a switch in that line to manually turn it off. If you leave it on it will drain th battery. You could also hook it to a fuse or something else that comes on when the ignition is turned. Ground should be very short in length with a large contact base.
Thank you for this VDO upload. I have one Question though, I want to power UP my Sony Xplod car amplifier at home which needs 12V to 15V DC supply with current rating of 26AMP to 35 AMP max, so basically i need 13V/35AMp DC supply. I am currently using SMPS at home for this which gives me 12V/25amp and my car amplifier works fine, but it gets Switch off when I increase the sound, due to may be it needs more current or Voltage...Please suggest why its so....Therefore I am thinking of using a car battery of 14V/35Amp here for smooth amplifier operation but to charge it, your trick may work, but i dont have volmeter. So tell me how much time it will take to charge battery fully with laptop charger without using Voltmeter or multimeter. OR else suggest me how I can get output of 13V/35Amp from SMPS or any other device conencting it to AC power supply at home.....thank you....
Why you put so thin cable on your amp supply and why you put the remote control like this the car has a blue cable from the same thing but more correctly 😉👈🙃
i just hooked up my dual 12s rockford fosgate the only subwoofers i will ever buy because i love them and my rockford prime r1 is all the amperage i need to make them bitches hit just how i lile not to soft but not overly loud like others them again i can just switch my equilizer to flat natural or superbass to gwt the knock i want for certain songs lol love subs makes riding around so much better
Carmelo Santana, this is the second comment I got like this. I'm not sure if the video has been watched. It's set up to show it's working, then I decided to demonstrate the connections for general use. The only reason this would catch fire would be if a negative and positive crossed, or if there was an over load. However, if an overload was the issue the fuse would shoot. Speakers can burn up but the small ones won't catch fire. I'm starting to think people have hooked their own systems up and grounded something positive to the battery causing fire
I was to close to the speaker with the camera. if you notice the sound seems to get louder as I step away however it's not the case it just was less overwhelming to the camera mic. for people that no nothing about hooking up an amp I just wanted to show where everything plugs in. thanks for watching.
Great explanation bro ⭐💯
I'm so glad I for some reason I held out and watched to the end. it's a must. I'm still laffing at the pure bass test. they must have been fighting over it, understandably of course.
if I'm honest I'm a bit pissed that I missed out
Hey, I didnt think anything of this video. Came to realize its helped quite a few people and made me quite a bit of money too. lol
Awesome video! It helped me a lot by showing me how to plug in my phone instead of a car radio!
Now don't do it like this
What I want to know is if you can put a bass bob with it cuz i blown my front rear speakers because I adjusted the bass through the stereo 🤷🏻♂️
I have that amp on 2 12 inch mtx subs and it sounds really good its a good amp but you have to have the right subwoofers and wire.
The speaker's wire you're using is not adapt for that amplifier also that sub or bass is not powerful enough for that amplifier.
I’m having a problem the light on the amp is red is that protection mode ? How to fix ?
Is the beer needed?
It's part of the tools you will need.
Please make video on panasound pn 808
which is better crunch old school or sony old school ?
Sony for sure.
Hey there. Am a new subscriber here first day. I have a question. I have JEC 600 amp. Am sure you know its specs since its an old engine. I also have one cliff design 4ohm 500rms 1000watts subwoofer which is double coil. Please help me how to wire the two coils to get the best out of it. The equaliser is boschman
Hi. I just installed a sony xplód cd player. i want to hook up an amp and sub. How do i make it so just the amp is supplying bass to my sub while the speakers are still just powered by the head unit? is this possible? thanks.
Your awesome thank you bro
I am using this video to show people why not to let there friends hook there stuff up . Thank you for the video of what not to do.
what are the 3 biggest problems you see?
+mdr3w Only 3 biggest problem? ID rather say everything is a problem.
Good Job.
Karthik Hegde
For the general population I would say to have your setup professionally done in a shop. I call this style "Shade Tree". Park under a shade tree and see what happens.
i have two options input and input trhough... what option I have to use and why ? thanks
Do input if you are only using one amp.
What was that box where you connected the pos. And neg. Wires? Can I connect it directly to the battery?
that is a DC to AC inverter. Those terminals run direct to the battery posts.
I have the Sony Xplod amp hooked correct but no sound is coming from my 12" subs and I tested to see if the sub was blown and it wasn't I need help with this problem.
HI,
Do you have the speaker bridged? if so make sure it is bridged correctly, if not make sure to try both the right and left side of the speaker connections.
Another reason could be the remote, if you have no power going to the remote the amp will not be on.
Make sure the settings on the left side are correct, the knob turned all the way to the right, and the switch should be good on either the right or left setting.
Check the fuses, sometimes if you connect an amp and accidentally touch a wire to another it will shoot the fuse and you will never know.
Finally make sure the audio going to the amp it turned up enough to hear the sound. there are two options to regulate sound, the sound coming from the RCA and the sound coming from the amp to the speakers, make sure they are both turned up.
Finally, make sure the light on the amp is coming on.
Let me know what you find out.
will the remote turn off still work if you have it wired like that. like will it turn off when the car is off and on when it is turned on
Dillon Watt, no. you need a power source that activates when the car turns in. if you have it hooked directly to the battery it will not go off unless you have a on/off switch on the power line.
Ok so the conectuon you have will not turn off the amp
Dillon Watt, right. I have it directly to the battery.
Ok thank you just cerious if that's ok but now I know it's not thank you again
Just put a on off switch on the line
Hey how do you differentiate bw speaker left and right wire?
Plus and minus wire
Should be a red line on the positive side.
It will sound weird if they are crossed. you will diffidently know.
Very nic use
When you bridge a car amplifier your taking all the rms power from the car amplifier at any impedance you have your speakers or car subwoofers wired at for an example a 1000 watt sony xplod car amplifier puts out 1000 watts rms in bridged mode at any impedance
i have a problem with my car audio system.. when i turn on my stereo my sub pops and when i turn the volume to 00 pop and volume to 01 pops what is the problem pls
Dylan Mamo something is turned too high. Maybe your amp is up on the highest setting. Your stereo probably goes from 0-50 with the volume. If you only operate within the first 10 numbers of the 50 you may want to turn the amp down some. The pop is a signal that the electronics are receiving to run on and off. 00 is essentially off, 01 is on.
In Daily Life Have Fun so i put the amp volume settings all down from the amp it self andni see if it make it.. so ppl told me that i can be the remote wire?
Dylan Mamo did adjusting the amp volume help?
In Daily Life Have Fun ...i will do it in afternoon and i see what it does... and why voice off the music is coming out from the sub?
I'm running my amp off of a stocked car system to power my woofer can anyone tell me how to hook the door speakers up to make the woofer work properly?
Chadrick Moore, what input is being used for the amp? RCA?
WARNING: DO NOT USE SPEAKER WIRE OR PRIMARY WIRE TO POWER YOUR AMPLIFIERS.THIS WILL CAUSE AN UNDERPOWERMENT AND WILL END UP BLOWING DUE TO NOT RECIEVING ENOUGH POWER.
Noted 💯
Where dose the sound come from the car speakers
Affectam, where I say bridged in the video. The negative and positive for sound. in the video I have the speaker bridged.
What does rem and gnd mean?
Shane Edwards remote and ground. Remote is what will tell the amp to come on. You'll need 12v power to that. On the back side of stereos it has a remote hookup. You can hook it directly to the batter, if you hook directly you'll need a switch in that line to manually turn it off. If you leave it on it will drain th battery. You could also hook it to a fuse or something else that comes on when the ignition is turned. Ground should be very short in length with a large contact base.
I hope this helped in some way. thanks,
Bro what gauge wire do you have💀💀💀
That's one way to get it done!
I need that amp for two 600 watt pioneer 12s
I have one ground zero for 2 memphis 15inch 500wrms and 6 mid 8 inch and 2 tweters 😜
Nice (y)
Thank you for this VDO upload. I have one Question though, I want to power UP my Sony Xplod car amplifier at home which needs 12V to 15V DC supply with current rating of 26AMP to 35 AMP max, so basically i need 13V/35AMp DC supply. I am currently using SMPS at home for this which gives me 12V/25amp and my car amplifier works fine, but it gets Switch off when I increase the sound, due to may be it needs more current or Voltage...Please suggest why its so....Therefore I am thinking of using a car battery of 14V/35Amp here for smooth amplifier operation but to charge it, your trick may work, but i dont have volmeter. So tell me how much time it will take to charge battery fully with laptop charger without using Voltmeter or multimeter. OR else suggest me how I can get output of 13V/35Amp from SMPS or any other device conencting it to AC power supply at home.....thank you....
you have anymore videoes
no sorry, not at this time.
Why you put so thin cable on your amp supply and why you put the remote control like this the car has a blue cable from the same thing but more correctly 😉👈🙃
Just showing how to hook it up. If I were mounting it for a long period of time I would use the correct guage.
Ok then
LOL. How not to.
This is a joke right ?
i just hooked up my dual 12s rockford fosgate the only subwoofers i will ever buy because i love them and my rockford prime r1 is all the amperage i need to make them bitches hit just how i lile not to soft but not overly loud like others them again i can just switch my equilizer to flat natural or superbass to gwt the knock i want for certain songs lol love subs makes riding around so much better
Yes, I have had a similar hookup in a ford explorer. sounded great.
Good video dude but what's up with that garbage sub? Lol!
It was a crap sub, I didnt have anything better.
thanks for the warning guys... got sea sick from cam
Sorry about that.
explanation*
Did this car caught on fire yet ?
No, it was not permanent. I wonder if someone else car did. lol
Waiting just to set on fire
Carmelo Santana, this is the second comment I got like this. I'm not sure if the video has been watched. It's set up to show it's working, then I decided to demonstrate the connections for general use. The only reason this would catch fire would be if a negative and positive crossed, or if there was an over load. However, if an overload was the issue the fuse would shoot. Speakers can burn up but the small ones won't catch fire. I'm starting to think people have hooked their own systems up and grounded something positive to the battery causing fire
Its called riding hot.
jdi
Lol what kind of bass is that .. haahaha
U can clearly see it wasn't bridged.. speaker sucks or the amp is screwed so if u buy u will to.. ha lamo
I was to close to the speaker with the camera. if you notice the sound seems to get louder as I step away however it's not the case it just was less overwhelming to the camera mic. for people that no nothing about hooking up an amp I just wanted to show where everything plugs in. thanks for watching.