Crank but No Start? Solved! | Common Ford Problem | 5 minute Ignition Barrel Switch Swap.
ฝัง
- เผยแพร่เมื่อ 24 ม.ค. 2023
- I thought it was the starter motor, but it's not! After 6 months of trouble starting my Transit, getting progressively worse, and after lots of testing, someone suggested the ignition barrell switch was a common Ford failure on all these types of key ignition including Mondeo, Focus, Fiesta, Fusion, Transit and Transit Connect. It was such an easy fix, I had to share it.
This Is The Part You Need...
amzn.to/40cXmus
Download an eManual from here... Code SPUD22 for 22% off
shareasale.com/r.cfm?b=510988...
Buy a Handy Compact Tyre Inflator here... Code SPUD10 for 10% off
www.ordiniq.com/?sca_ref=6009...
#RickTheSpud #Ford #Transit
Thanks for watching!
Please Like and Subscribe 👍
Instagram: @RickTheSpud
Instagram: / rickthespud
TH-cam: / rickthespud
Facebook: / rickthespud
Camera Equipment I use...
Sony HDR AZ1 Mini Action Camera - amzn.to/3Apb7tf
Sony DSC-HX90 Digital Camera - amzn.to/3qTTO06
Zoom H1n Portable Audio Recorder - amzn.to/3IrMCye
Movo GM100 Lavalier Lapel Clip-on Mic - amzn.to/3KCw1cY
My Favourite Car Products...
Mega Mount Compact Phone Holder - amzn.to/3Bn7KFa
Mega Mount Locking Phone Holder - amzn.to/3s0eyTZ
Bilt Hamber Touchless Snow Foam - amzn.to/3IASght
Bilt Hamber Double Speed Wax - amzn.to/3AvQhbx
Bilt Hamber Auto Wheel Cleaner- amzn.to/3rNSGu7
AutoBrite Snow Foam Lance - amzn.to/3H05pQV
Gyeon Bathe+ Shampoo - amzn.to/345Kc9x
Gyeon WetCoat Hydrophobic Coating - amzn.to/3Is3o04
Bouncer's Done & Dusted Detailer - amzn.to/3rJAySq
Gtechniq C4 Permanent Trim Restorer - amzn.to/3GWcAK4
Pingi Reusable Dehumidifier - amzn.to/3I6mM35
Disclaimer
*Some scenes were filmed on private land with permission.
*Some scenes are edited and maybe sped up for dramatic effect.
*Always drive well within the limit of your ability. - ยานยนต์และพาหนะ
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 7](http://i.ytimg.com/vi/FOIiws4XMGQ/mqdefault.jpg)
UPDATE: I've been asked so many times which part you need so I've now put a link in the video, a link on the end screen, a link in the description, and a link here, I hope that helps!
amzn.to/40cXmus
@rickthespud mate did you have any codes before this happened? Or did it ever cut out on you while driving? Mine cut out while driving and cranks but no start, tried the key in different positions as you suggested but no change? Just trying to gauge what my actual problem is.
Cheers in advance.
Nope, no codes.
If it's cut out while it's running and moving the key doesn't work I would guess that's not it, but change it anyway and see what happens. It's £8 and 5 minutes. 👊
@@RickTheSpud cheers boss
Let me know... 😉👌
Hi Rick, you have saved me from a 2 hour wait for the AA today. Had the same issue as you. The engine would turn over but not start. Gave the key a wiggle and hey presto the van started up. I will be ordering up the new part.
Ah that's brilliant! I'm so glad this has saved you. 👏👏👏
Make sure you subscribe too, and check out my other vids... 😎👌
Fixed my van because of this video. Thank you!
Ah that's brilliant! 👏
Don't forget to like, subscribe, tell your friends, send me money, whatever you want to do! 😜😂
I love you. Had this problem so often and FINALLY a fix! Thanks bro ♥️
No worries buddy! Happy to help.
Help me out, subscribe, and share me on your socials! 😎👌
Hi rick thanks mate you saved my bacon. Tried your advice spot on. Ordered a ignition switch from amazon, 30 minutes later all good. 😅
Yes mate! Well done! So happy for you! 👏
Glad it's all sorted. 😁👍
My van just started doing it, thanks mate really helpful
No worries Mark, hope you get it sorted. Make sure you subscribe, and check out my more entertaining videos! 👊😎
YOU ABSOLUTE LEGEND. VAN FIXED
Haha. Ace! 🥳
Make sure you subscribe! And tell you friends! 💪😉
My Transit lost central locking and once turned off it reset heater clock and radio would not work.
Today after changing the lock base everything’s working again.
Thanks for the tip!!
Ah brilliant! Glad that sorted it! 👊😎
Dude.....first try. Thank you so much.
Yes buddy! 👊🥳
Don't forget to Subscribe and tell your friends, plus check out my other vids!
Oh my god!! This worked after all sorts all
Morning.. thank you so much man.. just subbed and you’ve made my day 🎉😅👍🏻
Ace, that's awesome! And thanks buddy! 🥳👌
was it randomly or your car just stopped starting?
did you read any errors on a scanner?
You are the best,,,,I had the a
Same problem, mechanic charges Starter motor then he told me could be egr valve or fuel pump,,so I go to scrap yard, they gave it to me for free ,now Starts like new,,,, thanks a lot
Ah yes! Well done buddy! It took me a minute to work out what this was too hence why I made the vid! We got there in the end! 👊
Hi. Can you please tell me from where can I buy the part?. Thank you
was it randomly or your car just stopped starting?
did you read any errors on a scanner?
Rick u the best my man! Thank you
Got you sorted?
Rick your a Diamond, thanks mate 👍👍👍
No worries mate! 👊
Like, Subscribe, share, and tell your friends, 😎👌
Super good video dude thank and very well made .
Thanks Mr Ollie!
That get you sorted?
Cheers, fixed and subscribed..
Mine took a bit longer as i have the hands free radio control on the steering column..
Ah brilliant!
Oh you've got a posh one, 😂
Glad you got it sorted, and thanks for subscribing! 👊
Thank you so much Rick - I have a Fiesta Mk 6 - had problems on and off for a year with immobiliser issues which culminated into cutting out when driving and then just not starting at all. Just tried this and I'm back on the road - for anyone with Fiesta, you need a flathead screwdriver to depress the clip on the top as you can't get your fingers in.
Ah brilliant! Well done Sarah! So glad it worked! I was so relieved when I found out!
Help me out and Subscribe too! 😘👌
❤ subscribed
was it randomly or your car just stopped starting?
did you read any errors on a scanner?
No it happend over several months immobiliser would cut the electrics and eventually it led to not starting at all. All electrical and starting problems fixed by changing the switch. No errors on dash - @@marcoaurelio6941
Top man, thanks. Sorted my transit out right away!
Ace. No worries mate. Don't forget to Subscribe! 👊
was it randomly or your car just stopped starting?
did you read any errors on a scanner?
@marcoaurelio6941 was difficult starting. Had to push key around to get it started.
I dont think I had any codes
My transit has started giving problems when starting, I had thought it was the starter motor but will try this first.
Definitely. Let me know what happens... 👊
Same problem fixed , thanks a lot , you helped me a lot
No worries buddy!
Give us a subscribe if you haven't... 👊😉
was it randomly or your car just stopped starting?
did you read any errors on a scanner?
Thanks Great Help Pal 👍🏻
No worries, happy to help!
Make sure you're subscribed and it'll never break again!
Answers all my problems just ordered the part £7 ebay
Ace! Did you try the key manipulation truck?
Make sure you've Subscribed! 👊
thank you i think this is my problem like you said its a 5 min job and the part is a tenner
Exactly! Let me know how it goes. And Subscribe if you haven't! 👊😎
Genius! Thanks a million
No worries! That get you sorted?
been struggling for weeks with the bastard van, charging/jumping afterflattening both batteries! First wiggle of the key and it started like it should do, thanks again
Ah yes mate. So glad to have helped. Click the link to order one up... 👊
Absolute diamond 👏🏻 fixed the issues with my Fiesta!
Ah brilliant! Well done! 👏
Make sure to subscribe, tell your friends, and check out my other videos! 👊😎
Thanks great video my mk8 transit cut out on me wouldn t start just cranking over, went back to van wiggled key about in ignition and it fired up and now starting again so i have just ordered one part says it fits mk8
Ah brilliant. Didn't know if it was the same on a Mk8, so glad it's worked! 👊
Thank you so much. I've been looking at glow plugs, air in the fuel. But this is it. Thanks for sharing this.❤
🥳🥳🥳
Did you manipulate the key and it started?
I never thought of that. I've just bought a 2010 transit as spares or repairs for £550 . My Mrs is giving me grief over it and I've only had it last night. She even gave me a hand to push it in the driveway. If this works I will let you know . I did say to the seller I thought it was an immobilizer problem as it worked two days ago fine .He never mentioned that he had trouble before so fingers crossed. I will let you know .
Yeah defo, keep me posted! Try manipulating the key, doesn't always work but might help, then change the switch... 👊
Hi and thanks, I think you've saved me at least £100 on Ford diagnostics....! I tried the pushing the key down on my Transit Connect 2007 and it worked! I'd like to replace the part on the ignition shaft now as you show, but could you tell me what the part is called? I'm not a mechanic, just a woman trying to kit out an old van for camping. Thanks again Rick.
Ah brilliant! It's my pleasure.
It's a Ford Ignition Switch, if you search on ebay you'll recognise one from my video. Super easy to install.
And don't forget to subscribe and tell your friends! And watch some other videos! 🤗❤️
Hi mate, quick question - once you changed the ignition switch did that stop the wobble from the key when in the ignition? Reason I ask is mine is struggling to start and its very wobbly so wondering if mine may be on its last legs
Yeah a bit. Some of the movement is in the barrel itself which isn't changed, but some is in the switch. Try manipulating the switch when you twist it, push it in more, lift it up, pull it down.
But for about £8 and 10 minutes it's worth changing. A common problem.
And Subscribe 😜👌
Hi mate , just a quick question. My Ranger 3.0 Tdci 2009 has just developed a problem. I turn the key to crank or start position and hold it on for a ten to twenty seconds, then it responds. I’m get afraid of getting into a fuel station on a busy day because people yell at me for not moving off quick enough. What could be the problem, thanks buddy
Maybe. Have you got a proper key or is it push button? If it's a key then investigate the barrel switch...
Omg thank u so much woohoo
😂 Did it work?
👏🏻👏🏻👏🏻
That fixed it?
Hey Rick !
I had the same problem this morning with my transit custom 2016 . Manage to start the van but cannot find the part . Will I have to change the whole the ignition barrel?
Nope, just the switch on the back of the barrel.
Link is in the description of the video, or on screen at the end...
Pinned comment at the top too.
Make sure you hit that Subscribe button for me and check out my other vids... 👊😎
Hi I have the same issue, put new switch in but the problem still there ,key is quite loose ,any ideas?
Not sure mate, even if the key is loose, as long as it's turning the switch, that's all the key does. 🤔
This does happen to my ford fiesta, after driving on the motorway and stopping in each services it doesn't want to start then I have to keep trying after 10 or 15mins it starts again like normal, it does it especially after driving awhile on 60 70mph
Try manipulating the key to see if that helps, but prob change the switch anyway. Likely that's what it is... 👊
@@RickTheSpud yes I will try that trick if not I'll change the switch (because the battery is still months new) which means the same switch as you changed for your van in the video right?
I believe so. If it's got the same style key it's the same switch. Double check when you order it tho. 👊
@@RickTheSpud cheers mate for the great help, already subscribed 'cause I just found your channel, we'll get it to grow bigger in the future, fingers crossed 🙏🏾
Bless you buddy! Hope so! 😎👌
Hello I am French "my English is not great. I would like to know how you go about removing the cover under the steering wheel. I removed the 2 screws but it does not come. Do you have to pull hard on it or there is Are there any other screws? Best regards
On this 2007 Transit it's just those 2 screws, after you've pulled off that panel, which just clips in.
OK THANKS@@RickTheSpud
Would this be a similar problem wiyh a push button start mondeo mk4?
I'm not sure what activates the starter, you'll have to do some digging, but I can't believe it's a similar setup to a twist key...
But something obviously starts it...
@@RickTheSpud
Thanks mate
Hi mate great video i have same problem. What is the name off the part i need to change?
Hey thanks.
I think it's a Ford Ignition Switch. Have a search. It'll look like the one in the video. If I find it I'll put it in the description below...
I've put a link in the description, and in the video, and on the end screen.
@@RickTheSpud thanks I sorted it this morning many thanks saved me a few quid thanks again
Ah brilliant! I'll take a cheque! 😜
Jokes. Just subscribe and share my channel and we'll call it quits... 👊
Does this effect the Transit Custom? Mine is cranking but not starting.
I was driving then the engine cut off and wouldn't start again.
Quote possible. Try manipulating the key when you turn it. Push it in or lift it or pull it down when you twist it. Still might be it. It's about £8. Easy swap.
Did you ever figure it out? Mine did the same thing and ford gave up after replacing all the sensors, pcm, cables
Did you change this switch?
Yes I did
@@RickTheSpud
And did it cure it?
Would this be the same on a mk 6 transit?
Not sure, prob. Does manipulating the key help it! Google for a MK6 transit ignition switch and see if it's the same. 👊
@RickTheSpud I googled it and the switch is compatible with my year transit, I tried manipulating the key but it didn't help, I'm going to grab a brand new battery tomorrow from work and see if that helps as it turns over but doesn't start and then when I try again it just clicks
If it clicks it sounds like the battery.
quick question. before you actually fixed this did you scaned the van for errors? like did it said something about the fuel pump? because mine (transit connect 1.8 tddi) says.
did yours said to? out of curiosity
I didn't but there was no lights on. Never thought of it. If it had no EML on could there still be codes?
in my case there is no EML light on and it points me to no pressure on the fuel pump. The question that pops onto my head is: could no pressure on the fuel pump be triggered from this particular issue perhaps? @@RickTheSpud
@@marcoaurelio6941 Maybe. Try manipulating the key as per the video. Before you turn it, push it in more or lift it up or down to see if that works.
@@RickTheSpud thats what i was thinking. Thanks ill do that before i finalyze disassembling the fuel pump. If that works ill give you feedback. Thanks a lot
No worries mate. Yeah keep us posted. Hope it's a simple as that! 👊😎