From the deepest possible part of my heart i want to say thank you. Im thankful God sent you and this video over my path. I connected the wire and my immobilizer light stopped flashing and my fuel pump runs. Once again, thank you.
Guyz problem was the black and red wire which is linked to negative battery terminal was bad and he rewired it back onto the negative terminal under top bolt and washer which held it in place and he replaced the end connecter with solder. That red and black wire is the ground for the ECU if wires bad it cause issue as seen in picture
Also check the number 9 spot under hood in fuse box its a maxxi 20A yellow fuse which is the engine managment fuse , if thats bad it could cause dashes and no start on your instrumnent cluster
![Ford Focus Mk2. No start, no crank, immobiliser error/ Ecu/ Pats 16. [English subtitles]](http://i.ytimg.com/vi/XpyQ9ORcids/mqdefault.jpg)
From the deepest possible part of my heart i want to say thank you. Im thankful God sent you and this video over my path. I connected the wire and my immobilizer light stopped flashing and my fuel pump runs. Once again, thank you.
Any detail of wire what u did ?
Please explain to me how you did this. It would be great if you could make a video and post it on TH-cam. Thank you very much.
@@daltonbrothers2753he connected the starter signal wire to B+ i think
I have exact same issue with my ford fiesta Mk6. Any chance you could show or describe how you fixed it? It's pretty vague on the video. Cheers.
I have the same problem. should I check the blue cable near the battery? I had also tried to reflow the soldering inside the control panel.
Guyz problem was the black and red wire which is linked to negative battery terminal was bad and he rewired it back onto the negative terminal under top bolt and washer which held it in place and he replaced the end connecter with solder. That red and black wire is the ground for the ECU if wires bad it cause issue as seen in picture
Also check the number 9 spot under hood in fuse box its a maxxi 20A yellow fuse which is the engine managment fuse , if thats bad it could cause dashes and no start on your instrumnent cluster
I have the same problem on transit mk6 Data mismatch fault B2931 What did you do to clear the fault?
Video is so useless as no explanation is made. All we see is wire nor knowing which one was disconnected to be attached to the terminal.
Did you got a PATS code, mine is 6.0 or 66, any idea what could it be? Thanks
hello, what was the problem? Did you just replace the terminal and restart the vehicle?
Co podłaczyłes i do czego po maska i w środku samochodu
Can someone explain what he explicit did?
I have same problem in my please tell me how you did this
Asa face si amea ford mondeo 2008
Mate it would help a lot if you talked , and I can't read your thing the thing in your hand so I don't know what you did ?
Sveiks! Kur Jusu serviss atrodās?
You no check the trouble code why??
that is a key problem ignition key is not readed
What is the couse my bra
One off the most pointless videos I watched on TH-cam yet