Hi sir, do you made video for replacing rear inner tie rod 4ws? I couldn't find any video for this. After straightening the washer, Did i need to unscrew clockwise or counterclockwise? Im stuck at this. 🥲
I’m sorry I didn’t replace it. Check the manual see u can find any info. Or let the auto shop to do it. I believe it won’t be expensive to do this job.
Hi brother, already bought and received the tool. Unfortunately no man how to use it. Does it just plug and screw in directly into the box. What is the function of the spring inside the handle?
@@geaydellretro1682 when u do wheel alignments. U want to make sure the front and rear is lined up straight. If u can install the tool into the hole, it means it is straight. Then u need to remove the tool and continue the wheel alignments job. If the front and rear are not line up straight, the rear wheels turning will goes wrong angle. Then the 4WS function is not working properly. Read the manual, there should be a red line mark on the tool as well.
Now other problem cameout..rear centre steering find out already..but once to couple with front steering rack..the coupling joint facing upright...(suppose facing downright) thus unable to tieup ..
4WS lock pin tool -
www.australianonlinecarparts.com.au/honda-4w-steer-rear-toe-tool
sostools.com.au/shop/product/159-88444-honda-4wheel-steer-rear-toe-tool-12863#attr=
been looking for the last 3 hours thank you
@@ItzSurge thank you~
great video, thanks for all you uploaded 3rd Gen content
U a welcome
Another excellent vid on the 3rd gen :D
👌🏼👍🏻✌🏻😏
Hi sir, do you made video for replacing rear inner tie rod 4ws? I couldn't find any video for this. After straightening the washer, Did i need to unscrew clockwise or counterclockwise? Im stuck at this. 🥲
I’m sorry I didn’t replace it. Check the manual see u can find any info. Or let the auto shop to do it. I believe it won’t be expensive to do this job.
Youuuuuuuu!!
Great to see this just in case I got issues with my 3rd gen
Hi, , where i can buy the rear center lock pin?
Please read my comment or description.
Thanks..
Hi brother, already bought and received the tool. Unfortunately no man how to use it. Does it just plug and screw in directly into the box. What is the function of the spring inside the handle?
@@geaydellretro1682 when u do wheel alignments. U want to make sure the front and rear is lined up straight. If u can install the tool into the hole, it means it is straight. Then u need to remove the tool and continue the wheel alignments job.
If the front and rear are not line up straight, the rear wheels turning will goes wrong angle. Then the 4WS function is not working properly.
Read the manual, there should be a red line mark on the tool as well.
Now other problem cameout..rear centre steering find out already..but once to couple with front steering rack..the coupling joint facing upright...(suppose facing downright) thus unable to tieup ..