Well done! I worked on Nissans for about 40 years and this guy should be working at a factory training center. This is one of the best classes I have ever seen and done with little to no equipment. Bravo!
@@speedkar99 hi Great video. My situation. I have a 2020 Nissan Altima 51,179 a horrible strong burning smell was coming from inside car at times and outside of vehicle always. I never ever run it hard I keep it under 2.5 rpm’s. I bought car at 41,000 miles. I was curious to see how CVT fluid was doing so I pumped it out and I have the pics and it looks like cocoa cola. A strong burnt smell this was it. No engine indicators ever came up on for bad transmission etc. My concern is what if I didn’t change the fluid? Could the fluid have still lasted or would the fluid have caused serious problems and burned the surroundings of the steel belt??? I knew there is no exact answer or way of knowing. I really wonder how much more time of that burnt fluid especially with that strong pungent burnt smell could or would have damaged inside the CVT and what would the old burnt fluid damage specifically?? I found this!! forums.nicoclub.com/does-your-car-smell-cvt-tranny-smells-like-burning-rubber-t321697.html
Why would Nissan do that? Imagine if Ford or Chrysler explained to consumers in detail how their products are engineered to fail and potentially cost you and other drivers their lives in order to maximize profit even if by a small margin. Well if that happened they may have to cut production of most of their coupes and sedans. Ya know, like Ford. At least they circle the problem.
@@vid2ification just a guess but I believe the op was implying that Nissan should employ him to fix their trash cvt's. Nissan sales are down and will keep falling if they don't do something about this issue. Will they go bankrupt over this? NO. Because there will always be more uninformed buyers. And of course the ones who buy the car brand new and trade it in once it hits 50k.
@@vid2ification dealerships make more money on warranty work than they do on selling cars. So in sure dealerships wouldn't be happy about that. Automakers need to keep their dealerships happy.
I learned so much from this video that I never had any idea about when it comes to CVT's. This man apparently is an absolute CVT expert and was a pleasure to listen to. Thank you.
I just hope he didn't find his brother's underwear in the same place as his wife's. We could be looking at a "which car has a roommier trunk" video if that's the case.
My nissan X-trail, somehow have no power when accellerating and i dunno why? Do you know some of the symptoms of the failure that cause my cvt to do this, I want just a few symptoms that can cause this. If you want to talk private, we can do so to.
16 and still learning about cars (recently got the ASE G1 certification, barely, if that helps u know how little i know lol) but from seeing how simple manual transmissions are in the stark contrast to the cluster fucks that are FWD automatics i know i already dont wanna work on auto transmissions. And thats just the little FWD ones not even big truck transmissions and their valve body. I dread the day i learn to work on one, but also early await the learning experience.
"precision transmission has entered the chat" th-cam.com/users/PrecisionTransmissionvideos after watching a few hours of this amazing channel I would never buy another auto.
@@netdoctor1 doubt the mechanic industry will die down any time soon. Maybe for the common man gas cars won't be a common thing. But gas can't be beat everywhere yet
@@speedkar99 Well taking apart is the easy part, isn't it? ;) Thanks for this video. Your channel is the best, you explain things very clearly. I hope you make a video on Toyota's e-CVT some day.
OMG thatnk you for editing and speaking quickly. I actually watched your whole video because you kept things moving. Lots of people would make this a 1.5hr video which is PAINFUL to watch. Well done!
i had a feeling driving slowly and smoothly would make my car last longer. 2008 Altima coupe with 330K miles, only wear items replaced. still going strong.
just got a 2022 Mitsubishi Mirage and this video gave me peace of mind, with its 78 hp I think my CVT transmission will be ok...I think the mirage was the kinda of car the CVT was made for. :P
I expected the belt to be the primary cause of failures, but really It's amazing those belts can handle the amount of torque and number of cycles they do before failing.
Meaning belt isn’t the failure point. From my understanding w 190k mi on CVT and on the clock keep going. From 2011 2.5 Altima. Most failures come from lack of maintenance (every 25k to 35k fluid change), or excess heat(can be addressed with external cooler. Which also extends oil life about 10k more) and I’m driving this car under extreme condition. Just so you know. 120f AZ heat wouldn’t be any good for this tranny but yet it drives like a sewing machine and makes me smile whenever I get to the gas station. Just don’t forget that CVT suffers from extreme heat. And there are ways to make it run right. Before rebuilt is actually needed. Plus these can take some damages compared to automatic transmission where everything is actually gear. And run by hydraulics where kick down can actually cause more harm for the tranny than it should be.
Can anyone help me with my 2015 Sentra I have a whine when I rev or floor it, I have replaced the valve body and filters hoping that would fix the problem and found no metal shavings when doing so but my whine and some slippage is still occurring it has 80k miles on it , if anyone has suggestions please help
One of the best videos i've seen lately! Straight to the point (no unnecessary history lessons), fantastic pacing, doesn't skimp on details too much, clear audio and good video quality, jokes... Thoroughly enjoyed it! The only problem with it, it doesn't fit the title very well. Failure modes are not shown.
I’m on my 4th Nissan with a CVT transmission. Never had a problem with any of them. The three before my current Murano I put over 200,000 miles on them, regular maintenance is the key. I even put a hitch on one and towed a trailer with it. Drove it to Florida from Alberta three times, I’m sure that most of these issues are preventable my getting the vehicle serviced regularly. Spend a little now or spend a lot later.
I guarantee id break it on my jeep wrangler in a second offroad lol. Theyre cool but not durable. I have a wa580 trans out of old mercedes v8s, lets just say chrylser auto trans didnt hold up
@ Uh The engine is what's four stroke. The CVT just makes power go from the engine to the wheels/treads while feeling slushier than a vintage two speed with burnt out solenoids and low transmission fluid.
Thank you for disassembling the belt. That made everything click for me in my head. Everyone else on TH-cam just mentions the belt and skips over how it actually interfaces with the conical surfaces.
the knowledge I gained about the CVT is good but this gentleman is an absolute best in how eloquently described and edited this video. my has is off to you Sir.
The craziest part of watching these videos to me is that designing these things seems like something approaching magic, and yet mechanical engineers aren't paid very well. These guys design everything we use, they should be on TV showing off their designs while a presenter grabs his head with both hands and says "holy shit, that's amazing!"
@@fubisroc9673 The Dutch made a car called a Daff. It was famous when Alby Mangels crossed the desert with it and made his first travel show. It had a belt driven cvt. That was back in the 70's. Some small maintenance cart like at the golf course had belt driven cvt's. But all were low powered and the belt was easy to change. If they made a cvt with a easy cover to replace the belt it would be more attractive to buy.
Had the same thought. Maybe this isn’t the most reliable but you can see the ingenuity in the design. I’m sure a reliable CVT could be produced if it wasn’t optimized only for low cost. For example the too-small cooler. That seems like a dumb decision made only for cost savings.
@@DonnyLumpkin I hear from a lot of car channels that Jatco transmissions, specifically the CVTs in Nissans are poorly made and don't last. Its an interesting machine though and would be great if they were built to last.
@@DonnyLumpkin if you change the fluid every 30-60k they can last 200,000 miles but it also depends on what car you have. my coworker at Nissan was on his fourth in his sentra but on the bigger vehicles they dont tend to blow as often
Love it. Cardboard shop, no "professional" tools, use of families undergarments for clean-up - this whole vid shouts "I did this in my backyard, what's your f'n excuse?". Damn fine explanation on how CVT's work as well. No BS, just wrenching; I needed that, brother.
My 10 year old son can grab an electric gun and pull apart anything...that's the easy part. Granted this guy seems to know his stuff but you would NEVER tear down/rebuild a tranny in these conditions...EVER.
@@grenadegoboom4967 got a little bit of snap on, craftsman, Bonney, indestro, matco, and every brand under the sun. Some been out business for years. 50 year collection.
This was amazing. I never knew I wanted to know any of this, but you're SO intelligent, know exactly what you're talking about and don't have a boring slow delivery. Bravo!!
Most of the ones I've seen only have a problem with the spool valve stepper motor. $30 part and just requires dropping the pan and valve body which can be done in vehicle, takes maybe half an hour, and doesn't require complete disassembly of the transmission or replacement like other shops told those customers.
I just replaced my stepper motor, and the car drives a little better but it still shows the same code after a couple resets, do you have any clue why that might be? It drives way better but it still slips but I can feel it “shifting” up but it takes some time. The transmission is at 172k
@@JesusMorales-bn4qf If those are your symptoms you may actually have a physical issue internally. The main symptom we see is the stepper motor code and the car seems like it is stuck in "first gear". Won't change ratio at all and you can only do ~50mph tops.
@@Ashquacks yeah i think it might actually be slipping, I drove it yesterday like 30 minutes and I could reach speed but it takes time, I have to slowly get on the gas and the car starts gaining speed and when I feel it slipping I let go of the gas and the car takes a second but it goes to the next ratio
If you own a Nissan CVT, change the fluid every 30k. I've flushed mine (not drain and fill) every 30k. At 150k the CVT feels exactly like the day I drove it off the lot with 4 miles on the clock.
People are saying something like that about Subaru as well. The Subaru belt is like a chain mesh and parts of the metal wear off. The metal fragments start to clog up the valve body or something, so it can no longer control where fluid is going.
This makes cars totally disposables. No parts, you have to get the same transmission on warranty or if out of warranty pay for it and the service cost. And you get again the same problem, no thanks is better to get a new car with no CVT.
@@somarpr I think AT is almost the same case. Having my Omega mv6 and my sister's Corona's transmission rebuild and both can't last over four years. Rebuilding seems unreliable and the dealer charged something like 10,000-20,000 usd for a new one. Therefore I go with manual after that. Rebuilding a manual is far more reliable. I still have a 4AT Sambar Van though.
@@somarprAdevărat!Dar dacă este întreținută tine mult și bine.E adevărat că costurile de RK sunt cam mari ,dar oferă o plăcere la condus .Odată ce se fabrică și se înbunatațesc ,însemna că e ceva de capul lor
@@vasiilie3377 Well not here in Puerto Rico, there is a local program dedicated to problems with cars. 4 hours long total air time, first from 12noon to 3pm and then from 5pm to 7 pm. Every day a poor soul calls with a Nissan or Toyota or Korean car with CVT Transmission problems and most of them are out of warranty and still paying for the car. They end up with a not usable car which they are still paying to the bank. As they dont have 7 to 8 thousand dollars that the transmission cost here plus instalation and re programing. This transmission has been out from 2003 or so, almost 20 years and still is junk. There is nothing that can be done. I consider any car with it a disposable car.
I had a 2011 outback that started whining. Subaru garage said it was fluid pump failure. I told them to make repair and they said they don’t repair them. They quoted me a factory authorized used one for $2800 plus labor. I found a garage who got one from a junkyard and installed it for $1200. Drove the car for 232,000 miles and its been passed to two other family members.
WOW not only did you give clear accurate info I can understand you thru the entire video great audio and camera work, you get the instructor or the year award!!! 😀👍👍👏
Thanks for taking the time to clearly explain how these work. We bought a 2010 Sentra new and it has 155k miles on it and still runs quietly and smoothly. I never changed the CVT fluid until the warranty expired at 120k miles. At that point I drained the gallon that comes out and replaced it with Valvoline's fluid. Drove another 10k and did it again. I did it a second time at 140k. So far, so good. I mostly use the car to commute to work at 80mph and have not had any issues. I can see how higher performance cars would eat up such a simple belt with too much power. I'm hoping our Sentra just keeps on running since the resale value is low, but the car still drives like it did 10 years ago.
CVT's are great for cruising long distances on the highway at 80 or 90 mph in a lightweight car. What seems to mess them up is racing full throttle from stoplight to stoplight like I see a lot of Nissan owners doing, especially in the heavier SUV's. I know it's fun to be able to beat Audis, Camaros, and noisy Subarus from light to light with your Murano, but if you do that a lot, you'll end up in my buddy's transmission shop with bad news. Those transmissions are not made for racing.
My wife's Murana CVT failed just out of warranty. 5K to replace it. I will NEVER buy Nissan again, and will try to avoid overly complicated and unproven tech in cars
I was considering the Nissan Pickup truck. Providentially, I met a friend at the auto show, in the Nissan corral, who told me all about his horror stories owning a Sentra. Took his advice and bought a Ridgeline instead. Absolutely love the truck.
The CVT technology has been and still is the transmission method in snowmobiles, golf cars and ATV’s for years. But not hp as high as a car. And they use a rubber belt.
@@tomrogers9467 The problem isn't the steel belt, its Nissan North America marketers taking pressure from reviewers who demanded that CVTs feel like they're shifting and essentially programmed in a self-destruct mode to keep those reviewers happy (remember: reviewers seldom if ever put more than 500 miles in anything they're reviewing) if you can feel "gearchanges" in your CVT, then take it back where you got it from immediately, because it will grenade in short order
Yes..but he has a gift for being incorrect. I know lots of people that have Nissan cvt transmission.. some have well over 200,000 miles.. with the original cvt. It's all in the maintenance
As the owner of a Nissan maxima with the original cvt. With 245,000 miles. I get sick of car maintenance TH-cam fake wannabes talk about something I've never had a problem with. You sound like an absolute moron. Like that other guy. Scottie lol
Thank you for this post. I have a 2013 Jeep Compass with the 2.4. I think this is the CVT that is in my car. Also, a few Nissan (of course) and some models of Subaru. My CVT started going bad at about 25K. I took it back to the Jeep dealership multiple times as it was still under warranty, and of course, they could find absolutely nothing wrong with my car. Then, when my Compass went out of warranty, miraculously, they discovered I needed a new CVT. I have been a Jeep owner since 1983. CVT or not, I WILL NEVER BUY ANOTHER JEEP AGAIN.
I know better than to buy any vehicle with a CVT. BTW, the Compass is not a true Jeep. It is a Fiat. Stick with the Grand Cherokee, Cherokee, Wrangler and the new Wagoneer. These are true Jeeps and you won't find a mushbox in any of them. Don't let your bad experience with a pseudo-Jeep poison your mind against the real Jeep models.
@@NCF8710 Thank you, yes, Jeep is now Fiat. Over the course of 4 Jeeps since 1983, I have seen Jeep go straight down the sheet-hole. But even the new Jeeps are not worth buying.
Good decision, ALL new Jeeps are garbage. Anyone who says otheriwse doesn't work on them. Anything and everything produced by FCA is trash, and Chrysler was already ruining the Jeep brand before Fiat came along and made everything worse. Jeep hasn't made a vehicle worthy of purchasing since they killed the 4.0 inline 6 and even before they killed it, they made it less reliable each year by using cheaper innards.
@@rvierra7235 I disagree. In May, 2016 I traded in my 2002 Grand Cherokee with 252,000 miles on it for a 2016 Grand Cherokee with the 5.7L V8. One month later, I bought a 2016 Cherokee with the 3.2L V6 for my wife. Mine now has 76K miles and all it needed was tires, brakes and wiper blades. Hers has 67K miles and it needed tires, brakes, a battery and wiper blades. Other than oil changes, these vehicles needed no other attention. They look and run like new and right now, there is no reason to trade them in. These are the two best vehicles I have ever owned. And to put this into perspective, the first new car I bought was a 1973 Ford LTD Brougham. I have owned quite a few vehicles in the past 50 years.
@@NCF8710 I understand. I have only owned 4 Jeeps since 83, all purchased new. So I guess I would not know what I am talking about in the least and you would. The Cherokee (the real Cherokee) was last produced in 2001. If you are refering to that piece of shit "new generation" chair-oh-kee, this conversation is over. There are easier ways to display your lack of subject knowledge matter, rather than doing it on YT.
Great Video. I found it quite easy to add an additional transmission radiator to my daughters Altima. Takes an afternoon but adds additional fluid and cooling capacity to the system for minimal cost. I paid $60 for mine. You just splice into the coolant return line leaving the existing radiator.
Change fluid 40000km 25000miles the fluid is black like engine oil. Upgrade cooling is a good idea. Don't drive it like race car. I think it can't handle 24 hours of lemans.
Simply excellent video. Outfreakingstanding. To the point, clear speaking, no wind noise, logical approach, not jumping around in topic, etc. Dude this is top notch TH-cam high level instructional technique.
I had the impression CVTs were simpler than traditional transmissions. This video convinces me CVT isn't simpler than anything except maybe a moon landing. It also helps me understand why electric cars, with no transmissions, are so popular.
Really, what a Great video! Well done. I had two different V6 Altima's bought new, liked the car liked to drive them. kept them like new. A month out of warranty the alternator went out. after finding out that I couldn't change it out the dealer ripped me for $1025.00 to replace it. Got pissed the next day and went and traded it on a Tahoe. I told the dealer about it and found out he used to work for Nissan. He asks me if I had any trouble with the transmission and I told him no. He told me that I was lucky and that around 40,000 miles they start giving problems. When he told me how many Transmissons a month that they replaced i was glad to see it go. After watching this great video, I can see the weak links. PS, I will never buy another vehicle that I cannot change out an alternator on without tearing into the AC unit !
@@chuckschillingvideos Standard test when they first came out was a rubber hammer smacked against the bottom of the trans, if it made a jingling noise it indicated there were broken belt links lying in the sump!
Absolutely astounding! The guy is a natural born teacher and superlative explainer. Imagine what he could do with a laser pointer vs. toothbrush..... Ok so how do we promote this guy? Make him take editor of You Tube technical videos! you are the BEST
You make by far the absolute BEST videos I've ever seen! Straight to the points, no excessive banter, filler, fluff, or unrelated rambling on. Very concise and detailed. Thank you!!
Note the tiny oil cooler. A lot of failures that happen while climbing hills, towing, etc, are heat related, and result in the trans going into limp home mode. A neighbor who didn't have the money to replace the trans or the car (09 Altima) had this issue. I put a big B&M trans cooler on it 4 years ago and it's still going strong today, even through Vegas summers. I realize this isn't in a shop's best interest as a repair, too much liability, but for a low budget repair, it may or may not be an option for some people.
@@St0RM33 You're right. However, when you look at it from a Time versus Money perspective, it's simply just better to replace the transmission versus repairing it
@@tommurphy4307 The 350z/370z automatics are not bad, BUT - the kids that modify the SNOT out of them will run into inconsistent shifting patterns when the transmission is hot. This can be mitigated with an external transmission and separate oil cooler. I would not "lump in" the 350z/370z into the same arena as the POS leaf/rogue/maxima/altima/sentra/etc that used the CVT's. Those things MUST have fluid changes every 20,000 miles, but, - Nissan failed in: 1) Training the dealerships to actually recommend, advocate, and encourage such service 2) Nissan failed in properly TRAINING the dealerships HOW to do this properly (there's nuances to it, so it's not just your "boring" every day drop fluid, fill fluid mindless mouth breather low iq I'm hungover on a friday braindead mechanic service move 3) Nissan decided to GAMBLE in that, it believed that owners would simply trade/buy another nissan before the 60k/5 year "powertrain" (stupid name but whatever) warranty would end. 4) Nissan underestimated the failure rate 5) Nissan decided to try to copy toyota/honda - in pushing volume/value > reliability - I'm sure many former nissan owners are now in Toyota/Honda products 6) The 370z/350z/GTR are still 100% designed/manufactured in Japan - I believe cultural differences actually DO still count, as I'm sure more US/Mexico manufactured vehicles have higher defect rates - while you can outsource to lower cost countries, that cost cutting eventually shows up somewhere. 7) Even so, "some" 370z owners have "experienced" 7AT (7-Speed automatic) transmission failure - some are racing, some are doing auto-x, some are doing road course, and some simply had a BOTCHED dealership fluid change after begging the dealerships to replace the fluid, and having received the LOW IQ / MOUTH-BREATHER "It's a sealed transmission.." speech. 8) "Not all" (I hate that phrase too, women use it too often haha) - Dealerships actually have on hand the "CONSOLT" tool used to increase transmission fluid temp, in order to PROPERLY change the fluid on the automatics for the 370z 350z's. 9) The 7AT has a design flaw in that Nissan/JATCO - decided to use rivets in certain areas causing uneven wear and failure. Also - the flex plate tends to crack/fall apart, causing debris to "work its way" into other parts of the transmission. 10) Nissan dealerships have some of the highest turnover rates among any vehicle manufacturers out there. So, every time you do bring your car in, you may see the same smiling "service managers" face, but, the dudes that actually do all the work all day long are usually high on drugs/alcohol/"new"/or on their way out. It's worse than your typical retail banking branch. I believe Nissan should put in place an aggressive retention and drug/alcohol/talk therapy program for anyone who works within the dealerships, and also not allow for > 50 hours per week; Simply provide better reasons for people to stay longterm so you don't get a DRUGGIE working on your vehicle who then thinks it's "funny" when you call as a customer asking for your car back after it's been 6+ weeks when you were told "2-3 weeks." So - my advice/conclusion: Anyone buying ANY automatic from ANY manufacturer - Just pay that additional $15 per month for a separate mechanical breakdown insurance rider. Do not play the: "It's not my first rodeo bucko!" and think for a MOMENT that your standard insurance policy will magically cover you. It won't. You MUST PAY EXTRA for a separate POLICY. Not all insurance companies even offer this. Do not confuse it with a retarded/moronic/pointless/overpriced/scams r us "extended warranty" either. Do not rely on the "stupid" "power train" (why is it called such a stupid name!?) "warranty." You don't want to be stuck driving a rental vehicle for 6-8 weeks while Nissan tells you "Yeah, we don't know where your new transmission is... we lost the tracking number..." You also don't want to be the ginnea pig either - as very very very few Nissan dealerships have experience actually changing / replacing the transmission SPECIFICALLY on the 350z or 370z. They have TONS Of experience on the other models, but, they will LIE TO YOU, and lump YOUR car into that group, and you'll be stuck with a retarded Nissan sentra for 6-8 weeks. Which - for the record - A school bus has better brakes than a stock 2019 "new" Nissan sentra.
Had a 09 Altima Hybrid for 7 years, and now a 18 Rogue for 3 so far…no issues with the Altima in the slightest. Had 188k when I traded for Rogue. No issues thus far. Towing occasionally with rogue. (Under 1000 lbs). 56k in rogue now, but considering an aftermarket warranty. This video was very eye opening. Well done!
Aftermarket warranties are the most scammy of scams. Do yourself a favor and get something else. CVT are fine for smaller, lighter vehicles like an Altima and such. Rogue is starting to push it, doubly so if towing anything. You've been warned.
I'm shopping for an aftermarket waranty for my daughters Nissan Sentra. I've yet to find a company that doesn't excluded CVT's from coverage altogether!
I'm in the UK, we used to have DAF cars running around back in the '70s. They had the original CVT, most people called them elastic band cars. The belts were rubber just like a fan belt. They were long and ran under the car. A pair of variators at the front and the back of the car. These were open, not enclosed in a gearbox. But ran front to back in the transmission tunnel. They were odd little cars that were as fast in reverse as they were forward. The Dutch raced them backwards, back in the '80s. Great fun but dangerous as all hell.
I had a Nissan Murano with a CVT. I LOVED that vehicle. Comfortable, nimble, roomy, durable, fun. It was just great. The reason I got rid of it? The CVT failed. After 188,000 miles. Which I suppose isn’t too bad. But still.
As an old Trans builder you did an excellent job of explaining a very complicated subject very well. I can't tell you how many TH 350's and 400's along with c4 and c6 I have rebuilt... I would say in the thousands... I use to know where every spool valve, spring, ball bearing, clips, seals went... I made really good money when I could rebuild a trans in two hours... Really loved my job back then... Now I'm to old to do much of anything...
Wow, that was honestly one of the best vid's I've seen on YT. After explaining, you actually dug deep and showed as best as possible the HOW and WHY. 06 Murano with a trans replaced at 118K under warranty and once this one dies for good its the last Nissan ever. Great video and presentation, Masterclass. Best advice I've read has been to get in there every 40K and replace the trans fluid with a good synthetic. Don't follow the Nissan spec'd duration for that.
Really impressive amount of knowledge - thanks for taking the time and stepping through it all. I've got a CVT in my Subaru and always wanted to know how it worked. Fortunately Subaru extended the warranty on my CVT to 10yrs/100k miles so that's something.
@@jasonmiller2570 100k sounds almost like you were saying kilometers and not miles, maybe thats why he was confused, because yea 10 years, 100,000 miles sounds like the standard warranty issued by most of the companies out there today, at least for honda, toyota, subaru, kia and hyundai, which are the ones i can think of off the top of my head that have those warranties.
@@air-headedaviator1805 well, if you repair things for a living (I do), you get the idea what fails most frequently, and what is the cause of failure. After some time, the patterns develop. When you are describing patterns from your memory only, your opinion is not worth much. In order to get your personal bias and your memory problems out of the equation, you need to back up your opinion with hard data (like the computer entries about failures in the last 5 years for a particular car model). Once you have done it, your opinion becomes a reliable source of information.... I'm pretty confident that this guy knows what he is talking about, and he most likely looked at hard data in forming his opinions...
My Pathfinder is 10k KM 2020 model 1st owner, I noticed a CVT little shuddering issue since beginning, and the local nissan dealer insisted that this is normal! By the time the car went out of warranty, now shuddering is very clear. From my standpoint, Nissan Japan pushes dealers over the world not to expose those kind of issues to customers, and so they used to them, till the warranty is end up. I believe this is aligned with Nissan statement "Our mission is to enrich people's lives"!? It was one of the worst decisions I've ever made to trust Nissan😢
Unbelievable explanation, I felt like I have just been through a MasterClass in CVT transmissions. My Nissan Cube has a CVT and this was a great video on why I should drive it off a cliff if I ever have a transmission failure. Now I'm off to replace the transmission fluid, and pray to God's of NISMO!
Wonderful explanation. Gave a crash course about the techie part to a rookie like me. Have driven Nissan Tiida, Altima, and now X-trail/Rogue. Drove all to 150k and sold without any problem. Now in Xtrail which is at 135k, have started giving me jerks in the up-gear while I'm stuck in traffic or at a signal and pick up. Hence dove into this research to understand the CVTs.
Loved that humor 16:53 - "A fail that will make your transmission stuck in reverse and then you're literally going to be driving back to the dealership"
That was the funniest part! Everytime he talked about the brother's gym pants, and then his wife's whatever I was laughing. Then he pulled that reverse, hah!
What i have witnessed working for Nissan several years ago was sales people telling buyers "Oh its a sealed transmission, no maintenance at all" thats a lie out their ass and it infuriated me. Thats why majority of CVTs fail, not the proper maintenance.
Exactly this. I even had a service writer at a Nissan Dealer tell me that I didn't need to change my fluid at 40k. It just needed an inspection. I told him there is no such thing as lifetime fluid and made them do it. Fluid went from dark/dirty green to bright green. I, however, turned down their stupid 40$ cabin air filter they were pushing.
This is the EXACT transmission that I had fail on my 2005 Murano TWICE in 125000 miles. Thank you for making this and explaining the inner workings of these transmissions!
We had a 2008 Altima 2.5 that lasted 200k miles with the original transmission. We sold it to my uncle who is still driving it 60 miles everyday to and from work. I don't have any clue how that little transmission is still alive.
Because it was a 2008. Nissans we’re more Japanese then. Now they’re Renault, mostly. Big difference. They’re trading off their old rep, and people are expecting the same from these new ones. And they are disappointed.
It's been said many times in your comments, but your fluid momentum and hands on knowledge of the automatic/CVT transmission, make this such a pleasure to watch. Subscribed. Thank you.
fixed these for years and years at a transmission shop . You can get parts . He did a fantastic job explaining how they work . He should be training guys how they work
@@josephschultz4097 Can still get some Mazda’s with a manual. Really most cars that aren’t American are available with a manual as an option. So, if you really want a manual just do the searching and you can find them.
@@diegosc985 a friend has a 2014 Versa that's been horribly wrecked twice and most of the nearly 200k miles is cross country trips. Engine still purrs and transmission/shift assembly still feels vague and unsatisfying to shift just like new. It's impressively reliable despite the abuse.
I honestly don’t miss my stick shifts these days. If I want there is a semi-manual flappy paddle manual system on my current car but I had one quick go with it, found that the dash display tells you when to shift and then thought “if you are going to follow the car’s suggestions then you might as well be on auto anyway” and went right back to full auto.
This was pleasant to watch, and well presented. You sir, get a like 👍 I've rebuilt a few auto trans, a couple old school manuals, and I had a pretty good idea of how these CVTs work. But it was nice to finally see one completely pulled apart, without having to do it myself. Thanks for taking the time.
I know, it's weird to think a metal belt *ever* made it out of the boardroom and into production right?!! Lol! Everyone claiming they were the future, THE ULTIMATE IN EFFICIENCY! Yeah, super efficiency.. in spare trans sales 🤣🤣
The CVT in my 2018 Maxima is incredibly fun to drive compared to other similar horsepower cars I've driven with standard automatics. I'm no mechanic, but I do know when you put your foot down the car goes like a rocket until you take your foot off the gas. There's no jerking through gears, just seamless and smooth acceleration. I know everyone hates them, but I like how they drive. If it fails, it fails. My 2014 Tacoma transmission, which is supposed to be bulletproof, died after only 115,000 miles with regular scheduled maintenance and never towed anything with it. Also the rear leaf suspension rusted out and squealed, the frame rusted through and it was garage kept. All these videos make it seem like these CVT transmissions are failing left and right but I see more 5 year old Altimas, Maximas, rogues, and muranos on the road than almost any other car.
@@chaosdimension6433 well the altima was kinda the spear header for the nissans CVTs are crap argument because in 08 when they first started using them they didnt even bother with a transmission cooler at all, so not only did premature wear happen pretty frequently, but another fault was that the car would go into limp mode and tell you the trans was overheating, that being said i hate the Nissan CVTs because toyota and honda have been making CVT equipped vehicles for longer (honda insight, hybrid civic and the prius) and their CVTs havent got such a horrible reputation. But ive had a 07 nissan sentra with a CVt that works well enough That being said the Op is the second person ive seen that mentioned how fast the CVTs change ratios and ive never seen that happen both a 12 maxima and my 07 sentras go through the ratios really slow compared to my 2011 fusion and my partners 2018 330I BMW, especially on kick down.
Don't be the guy that says "mine works fine so there can't be a big issue". Your's is 2018 but they have been failing left right and center for years since they came out it's just a question of when, even nissan acknowledged it at some point. If you have vq35 or similar, it's simply too much power for such a trash transmission. You've been lucky, My 2012 maxima 350 transmission was serviced regularly and it still failed, crazy quotes to replace transmission even if i could find one with low km's or in better cond than the old one. Even my mum's Juke which has a cvt is starting to show signs of transmission issues and she has been gentle as with it and religiously had it serviced at Nissan. At least a regular transmission can be repaired if it fails and it doesn't spell the end for the car. Obviously it won't bother you until your car becomes a lump of scrap metal because of one aspect of the car failing due to bad design.
@@mrgreen6374 Hi. You've hit the nail on the head with your "at least a regular transmission can be fixed, and your car is not wasted". Manufacturers are constantly coming up with ways to make these things unserviceable/DIY-able. The manufacturer (through dealerships) want more of your money spent on their product. If it's not buying parts/repairs it's buying another vehicle. If you don't have the tools, the knowledge or the parts required to fix/repair their product, you have no choice but to go back to them. *Edit ....or someone else, which is why some of these manufacturers are now going broke. Nissan has half the reputation it used to have, (where I come from) Mitsubishi also.
Wow! I wasn't expecting such an in-depth teardown when I clicked this, that was extremely interesting to see. I knew the general function of CVT transmissions having worked on snowmobiles and the like, but never had one disassembled in front of me or had it so expertly explained. Excellent video! Thank you!
It was a great video! I have also dealt with CVT for my snowmobiles over the years. The big difference is having a simple spring loaded pulley system CVT based on centrifugal force and a user changeable rubber belt! It's easy to work on and mechanically smarter that the complicated Nissan Jatco CVT. Makes sense to change a rubber belt once every couple years for $150 versus a $5000 CVT but I get that the weight of a car requires all the complex hydraulics and cooling.
he taught an entire class on CVT transmissions via a toothbrush...
Do you suppose he teaches hygiene with one of those pulleys in his other hand?
in 20 mins
The working man's laser pointer.
And his brothers pants
Better than UTI I always say
Well done! I worked on Nissans for about 40 years and this guy should be working at a factory training center. This is one of the best classes I have ever seen and done with little to no equipment. Bravo!
No equipment?? Such disrespect for the toothbrush 😤
Why nissan cvt are bad ?. You work 40 years there
@@MVDSo2 just because someone worked for nissan for that long, doesn't mean they were on the design team or whatever they call it.
They're bad because the chain has a design flaw. It's too weak.
@@BoleDaPole cant u just change the chain into a stronger one, I like nissan design on the rogue but transmission weak
How is it possible that you explained such a complex mechanism so complete and clear in less than 20 minutes? You even made it humorous.
Thanks!
@@speedkar99 you are great ,your channel is great and i hope became famous
@@speedkar99 You are a very efficiency instructor. Better than most TH-cam "mechanics".
Im just glad he didnt start pulling out his daughters underwear.... Awesome vid CVT 101 thru 105 in 20 mis....
@@speedkar99 hi
Great video.
My situation. I have a 2020 Nissan Altima 51,179 a horrible strong burning smell was coming from inside car at times and outside of vehicle always.
I never ever run it hard I keep it under 2.5 rpm’s. I bought car at 41,000 miles.
I was curious to see how CVT fluid was doing so I pumped it out and I have the pics and it looks like cocoa cola. A strong burnt smell this was it.
No engine indicators ever came up on for bad transmission etc.
My concern is what if I didn’t change the fluid? Could the fluid have still lasted or would the fluid have caused serious problems and burned the surroundings of the steel belt??? I knew there is no exact answer or way of knowing.
I really wonder how much more time of that burnt fluid especially with that strong pungent burnt smell could or would have damaged inside the CVT and what would the old burnt fluid damage specifically??
I found this!!
forums.nicoclub.com/does-your-car-smell-cvt-tranny-smells-like-burning-rubber-t321697.html
9:32-11:51 showing how the diameters change is one of the best and most helpful explanations of the CVT I've seen. Great work!
jeez, this guy knows his stuff, nissan should employ him. no hesitation in his presentation, clear and precise. i could listen to him all day.
Why would Nissan do that? Imagine if Ford or Chrysler explained to consumers in detail how their products are engineered to fail and potentially cost you and other drivers their lives in order to maximize profit even if by a small margin. Well if that happened they may have to cut production of most of their coupes and sedans. Ya know, like Ford. At least they circle the problem.
@@vid2ification just a guess but I believe the op was implying that Nissan should employ him to fix their trash cvt's.
Nissan sales are down and will keep falling if they don't do something about this issue. Will they go bankrupt over this? NO. Because there will always be more uninformed buyers. And of course the ones who buy the car brand new and trade it in once it hits 50k.
@@kismyc0untryazz-491 they make no money on warranty claims, so.....
@@vid2ification dealerships make more money on warranty work than they do on selling cars. So in sure dealerships wouldn't be happy about that. Automakers need to keep their dealerships happy.
@@xenonram dealerships sure, but i thought you were referring to the manufacturer Nissan. My mistake
I learned so much from this video that I never had any idea about when it comes to CVT's. This man apparently is an absolute CVT expert and was a pleasure to listen to. Thank you.
You are welcome
I didnt even know CVT existed. Thats such a cool technology, completely negating the requirement of a classic transmission.
@@termitreter6545 You don't know a lot about cars do you? Maybe a car with this transmission would be perfect for you.🤣🤣🤣
@@fredzephire4071 Considering your behaviour, you dont know much about humans, do you? Maybe get a life xD xD xD
@@fredzephire4071 hey, everyone has to start learning somewhere, unless you're Minerva and sprung forth fully formed from your father's head
Note to self: Don't leave any laundry around this guy.
Especially the brother's laundry. LOL
I just hope he didn't find his brother's underwear in the same place as his wife's. We could be looking at a "which car has a roommier trunk" video if that's the case.
Lol
**Stares intently at your old gym pants**
@@ReallyRyan. *clutches my old gyms pants and run away*
I don't even have a vehicle with a CVT but this was so well done that i watched the whole video.
Me too !!!
Good please never get a vehicle with one. @@rsc9520
Has to be one of the best videos explaining how a CVT transmission works
...now really impress us and put it back together
What are you, a Masochist?
@@gilbertosantos2806 I think the term is Sadist
Trick question! Not even Nissan knows how to do that
when you say cvt transmission works
It only has like 4 moving parts
3 Important things while working on Transmissions:
1. Brother's Gym Pants
2. Tooth Brush
3. Brother's Underwear.
And socks and sweaters
@@speedkar99 😁
4. Wife's "something"
...... Wife's unmentionables.
"Hope they won't ban this as a Dirty Video" 😀 ✔ 😵
@@sfopaladin2661 Yeah well, he did bust a nut...
I love that he points everything out with an oil covered, destroyed bristle, bright green Oral B toothbrush haha
After he mentioned wife's something I was waiting for him to mention something about the Toothbrush saying it was someone's
Look up Gene Kim
Wow never seen any one do a Nissan sub-assemblies that way...lol
Saaame
Not every teacher needs a yardstick
I work for the company that makes the CVT belts. Its amazing how complex that belt is given its unassuming simple look. Its the most vital link.
My nissan X-trail, somehow have no power when accellerating and i dunno why? Do you know some of the symptoms of the failure that cause my cvt to do this, I want just a few symptoms that can cause this. If you want to talk private, we can do so to.
LOL!! I know someone who works at a bank, maybe I should ask him why I'm always broke... Weirdo.@@VistirinDainn
@@VistirinDainninstead of asking a complete stranger to dedicate loads of time in a youtube comments section, perhaps just go to your local garage.
@@stevenm8970 never understood people who comment stuff like that lmao
@@stevenm8970what and ask a stranger there to waste his time
This is a man that loves learning the “why” of things and loves what he does.
I used to rebuild automatics, that motivated me to drive manual.
16 and still learning about cars (recently got the ASE G1 certification, barely, if that helps u know how little i know lol) but from seeing how simple manual transmissions are in the stark contrast to the cluster fucks that are FWD automatics i know i already dont wanna work on auto transmissions. And thats just the little FWD ones not even big truck transmissions and their valve body. I dread the day i learn to work on one, but also early await the learning experience.
"precision transmission has entered the chat" th-cam.com/users/PrecisionTransmissionvideos after watching a few hours of this amazing channel I would never buy another auto.
Glad that we are getting rid of transmissions altogether with EVs. Or it is just limited to 2 speeds in the Porsche.
Only gearbox failure I had was with a manual.
5 speed + reverse converted to 1 forward speed - direct drive !
@@netdoctor1 doubt the mechanic industry will die down any time soon. Maybe for the common man gas cars won't be a common thing. But gas can't be beat everywhere yet
This guy knew every single piece of this transmission down to the dust particles and didn't even skip a beat, Almost like he built it.
Haha you'll never see me build this back
@@speedkar99 oh come on, challenge yourself, where's your spirit? Rebuild the CVT 🤣 just kidding, there's more pieces in that than a 1/2 scale Titanic
But was clueless about the correct way to undo large nuts !
@@imblackmagic1209 A hammer and a punch is not the correct tool but it'd removed that nut non-destructively !
@@speedkar99 Well taking apart is the easy part, isn't it? ;)
Thanks for this video. Your channel is the best, you explain things very clearly.
I hope you make a video on Toyota's e-CVT some day.
This guy has the most straightforward, clear, entertaining explanation that I've ever encountered. Highly recommended.
OMG thatnk you for editing and speaking quickly. I actually watched your whole video because you kept things moving. Lots of people would make this a 1.5hr video which is PAINFUL to watch. Well done!
Yep - no shitty music either 👍
I agree a 100% no crappy music or long intros like a high production movie. And kept it moving. Thank you
100% agree 👍
That's a great point.
Hahaha he busted a nut!
I've never learned so much from someone gesturing with a toothbrush.
And sopping up transmission fluid with his wife's knickers.
I have, but I went to prison once.
I think the brush is too small for those teeth ;)
That's funny
@@joelglanton6531 😅
i had a feeling driving slowly and smoothly would make my car last longer. 2008 Altima coupe with 330K miles, only wear items replaced. still going strong.
Been doing the same on my 2008 altima coupe. 190k so far and the bearings and air-conditioning are going out first.
Did you do regular tran fluid changes?
@@alan-cl1rj it's a must, and be gentle with the throttle.
just got a 2022 Mitsubishi Mirage and this video gave me peace of mind, with its 78 hp I think my CVT transmission will be ok...I think the mirage was the kinda of car the CVT was made for. :P
Found the one responsible altima driver
This is the best detailed instruction on CVT operation that l have seen.
Your knowledge is unparalleled sir. You're a living auto encyclopedia 💯
Thanks, I learn as I go
And modest too!
@@speedkar99 You're an engineer right? I get engineering vibes from you.
No THAT title goes to Chris Fix
No ... you are more than engineer dude.
I expected the belt to be the primary cause of failures, but really It's amazing those belts can handle the amount of torque and number of cycles they do before failing.
No shit you think 120 hp cars can kill it quicker it’s got a punie engine 😂
Meaning belt isn’t the failure point. From my understanding w 190k mi on CVT and on the clock keep going. From 2011 2.5 Altima. Most failures come from lack of maintenance (every 25k to 35k fluid change), or excess heat(can be addressed with external cooler. Which also extends oil life about 10k more) and I’m driving this car under extreme condition. Just so you know. 120f AZ heat wouldn’t be any good for this tranny but yet it drives like a sewing machine and makes me smile whenever I get to the gas station. Just don’t forget that CVT suffers from extreme heat. And there are ways to make it run right. Before rebuilt is actually needed. Plus these can take some damages compared to automatic transmission where everything is actually gear. And run by hydraulics where kick down can actually cause more harm for the tranny than it should be.
@@JBROKC I worship ramen god.
There was a noodle and soup. there the ramen was created.
Genesis 1:1 Maruchan-Nissin version
Can anyone help me with my 2015 Sentra I have a whine when I rev or floor it, I have replaced the valve body and filters hoping that would fix the problem and found no metal shavings when doing so but my whine and some slippage is still occurring it has 80k miles on it , if anyone has suggestions please help
@@tylerlevitt523 well enough with the flooring. Get the drain and fill done along the filter+gasket kit changed out.. that should do the trick
All the thumbs down are from Nissan management..
Haha maybe I should apply there
And maybe his pants-less brother
Nissan management 😂😂😂😂😂😂😂😂😂😂
Or Nissan owners
@@kirbywinters1291 people that are victims to these crappy cvts are the first ones to like
Finally, someone who is able to demonstrate how a CVT in a way that makes sense to me! What a great video!
Best CVT video I’ve seen yet 👍
Agree 100%! Great lesson!
Agree 👍
One of the best videos i've seen lately! Straight to the point (no unnecessary history lessons), fantastic pacing, doesn't skimp on details too much, clear audio and good video quality, jokes... Thoroughly enjoyed it!
The only problem with it, it doesn't fit the title very well. Failure modes are not shown.
Really.....hold ma 🍺
the kid, KNOWS HIS SHIT !!!
Drove a Sentra rental for 3500KM on a vacation. That was enough to convince me I would never own a CVT based vehicle.
Some day you may not have many choices...
@Rafa Towers they already betrayed rotor engine.
@@Mocconagames Rotary isn't efficient, and has alot of design flaws. They didn't betray shit. They just know that making Rotary's isn't feasible.
Same here...
@@spol1622 There will always be Manual Transmissions around.
The efficiency of the editing is legendary. Thank you for no long wind up to the work itself.
I’m on my 4th Nissan with a CVT transmission. Never had a problem with any of them. The three before my current Murano I put over 200,000 miles on them, regular maintenance is the key. I even put a hitch on one and towed a trailer with it. Drove it to Florida from Alberta three times, I’m sure that most of these issues are preventable my getting the vehicle serviced regularly. Spend a little now or spend a lot later.
I too have had a number of CVT boxes and have done hundreds of thousands of km's of towing, regular maintenance is the key to a long life.
You sir are a true gambler from the far west.
I guarantee id break it on my jeep wrangler in a second offroad lol. Theyre cool but not durable. I have a wa580 trans out of old mercedes v8s, lets just say chrylser auto trans didnt hold up
Bs they be trash
Mitsubishis have Jatco tranmissions too and the owners all swear changing the trans fluid every 30k miles will make them last forever.
This man is a genius and a very clear communicator.
I have come to many conclusions in life.... one is I will never understand how an automatic transmission works. I am OK with that.
I feel like its a life long journey.lol
They are not that difficult to grasp.
Torque converters on the other hand are just witchcraft.
You should check on motorcycle's cvt.. that way you will understand better..
CVT is nothing but a glorified snowmobile powertrain, except four-stroke.
@ Uh
The engine is what's four stroke. The CVT just makes power go from the engine to the wheels/treads while feeling slushier than a vintage two speed with burnt out solenoids and low transmission fluid.
Thank you for disassembling the belt. That made everything click for me in my head. Everyone else on TH-cam just mentions the belt and skips over how it actually interfaces with the conical surfaces.
the knowledge I gained about the CVT is good but this gentleman is an absolute best in how eloquently described and edited this video. my has is off to you Sir.
The craziest part of watching these videos to me is that designing these things seems like something approaching magic, and yet mechanical engineers aren't paid very well. These guys design everything we use, they should be on TV showing off their designs while a presenter grabs his head with both hands and says "holy shit, that's amazing!"
As a mechanical engineer I can attest to both sides here
Supply and demand
But there are also things where the engineers smoke to much funny stuff and designed some disastrous stuff that us poor mechanics have to fix.
This is the first time I've heard someone talk about a CVT transmission without bringing up snowmobiles!
@@fubisroc9673 The Dutch made a car called a Daff. It was famous when Alby Mangels crossed the desert with it and made his first travel show. It had a belt driven cvt. That was back in the 70's. Some small maintenance cart like at the golf course had belt driven cvt's. But all were low powered and the belt was easy to change. If they made a cvt with a easy cover to replace the belt it would be more attractive to buy.
Ive always wondered what the metal CVT belt looked like. Really clear explanation of how it works.
Amazing how complex it all is, and it all just works as well as it does. Human ingenuity is amazing.
Had the same thought. Maybe this isn’t the most reliable but you can see the ingenuity in the design. I’m sure a reliable CVT could be produced if it wasn’t optimized only for low cost. For example the too-small cooler. That seems like a dumb decision made only for cost savings.
It's just proved how amazing our God is!
@@eromance12345 your god
@@hotcakesism and bigbang randomly created us all?
@@eromance12345 pretty sure the engineers were of the normal human variety.
Extremely good video. My respect for CVT has increased 10 fold after going through the complexities.
Me too.
And so has my disapproval
Same, I went from hating them to hoping that car companies learn to make good reliable CVTs
@@leonidas14775 they wouldn’t be that bad if people actually maintained them because they are NOT in fact sealed for life
@@DonnyLumpkin I hear from a lot of car channels that Jatco transmissions, specifically the CVTs in Nissans are poorly made and don't last. Its an interesting machine though and would be great if they were built to last.
@@DonnyLumpkin if you change the fluid every 30-60k they can last 200,000 miles but it also depends on what car you have. my coworker at Nissan was on his fourth in his sentra but on the bigger vehicles they dont tend to blow as often
It's a God belt. Once it fails all Hell breaks loose
Fantastic “how shit works” video. No fluff or bullshit or forced ott personality, just a little bit of humour. Awesome.
Love it. Cardboard shop, no "professional" tools, use of families undergarments for clean-up - this whole vid shouts "I did this in my backyard, what's your f'n excuse?". Damn fine explanation on how CVT's work as well. No BS, just wrenching; I needed that, brother.
Seen mechanics with 50 grand of snap on tools that can't fix shit. Maybe 100 grand.
My 10 year old son can grab an electric gun and pull apart anything...that's the easy part. Granted this guy seems to know his stuff but you would NEVER tear down/rebuild a tranny in these conditions...EVER.
@@getsum697 probably a spare that got warrantied at the dealer, hes probably their master tech
@@genefoster8601 if your mechanic has snap on you can almost guarantee they cant fix shit.
@@grenadegoboom4967 got a little bit of snap on, craftsman, Bonney, indestro, matco, and every brand under the sun. Some been out business for years. 50 year collection.
This was amazing. I never knew I wanted to know any of this, but you're SO intelligent, know exactly what you're talking about and don't have a boring slow delivery. Bravo!!
This is so good. No ahhhs, ummms, howyadoin, and other crap.
his wife underwear was a good touch
@@smopuim right before he busted a nut
man, there are so many video presenters that either are vain or have voice problems ... cannot do those.
Most of the ones I've seen only have a problem with the spool valve stepper motor. $30 part and just requires dropping the pan and valve body which can be done in vehicle, takes maybe half an hour, and doesn't require complete disassembly of the transmission or replacement like other shops told those customers.
I just replaced my stepper motor, and the car drives a little better but it still shows the same code after a couple resets, do you have any clue why that might be? It drives way better but it still slips but I can feel it “shifting” up but it takes some time. The transmission is at 172k
@@JesusMorales-bn4qf If those are your symptoms you may actually have a physical issue internally. The main symptom we see is the stepper motor code and the car seems like it is stuck in "first gear". Won't change ratio at all and you can only do ~50mph tops.
@@Ashquacks yeah i think it might actually be slipping, I drove it yesterday like 30 minutes and I could reach speed but it takes time, I have to slowly get on the gas and the car starts gaining speed and when I feel it slipping I let go of the gas and the car takes a second but it goes to the next ratio
@@JesusMorales-bn4qf you probably bought a bad stepper but a brand new one from rock Auto for 90$
The end explained my main question.... "is this going back together?" :) nice presentation.
If you own a Nissan CVT, change the fluid every 30k. I've flushed mine (not drain and fill) every 30k. At 150k the CVT feels exactly like the day I drove it off the lot with 4 miles on the clock.
People are saying something like that about Subaru as well. The Subaru belt is like a chain mesh and parts of the metal wear off. The metal fragments start to clog up the valve body or something, so it can no longer control where fluid is going.
Proud to say I got my murano up to 209k on the clock and all we did was oil changes and not hot rodding it around
I'd rather have a regular transmission over a cvt
@@zillamillwhat happened after you got it to 209k?
@Bm0ney_cs totalled in an accident 😔
Under appreciated video editing here. Straight to the point, no babbling. Thanks!
I was worried that we would watch every bolt and nut being removed but he cut out the rest after the first one of each bunch.
U should compare a Honda Toyota and nissan cvt and compare the designs and quality differences
That would be great but Honda and Toyota transmissions are worth alot more and aren't easy to come by for a teardown
speedkar99 what about Subaru cvt?
@@andersonrodriguez8258 subaru probably uses toyota/aisin cvt
@@carholic-sz3qv ehhh subaru have transmission problems to
@@hamie577 because they use it for their awd system, unlike toyota
despite cvt having many issues its amazing how people can come up with new ideas for transmissions
No shit. Why did they bring this junk into the market ...
This makes cars totally disposables. No parts, you have to get the same transmission on warranty or if out of warranty pay for it and the service cost. And you get again the same problem, no thanks is better to get a new car with no CVT.
@@somarpr I think AT is almost the same case. Having my Omega mv6 and my sister's Corona's transmission rebuild and both can't last over four years. Rebuilding seems unreliable and the dealer charged something like 10,000-20,000 usd for a new one.
Therefore I go with manual after that. Rebuilding a manual is far more reliable. I still have a 4AT Sambar Van though.
@@somarprAdevărat!Dar dacă este întreținută tine mult și bine.E adevărat că costurile de RK sunt cam mari ,dar oferă o plăcere la condus .Odată ce se fabrică și se înbunatațesc ,însemna că e ceva de capul lor
@@vasiilie3377 Well not here in Puerto Rico, there is a local program dedicated to problems with cars. 4 hours long total air time, first from 12noon to 3pm and then from 5pm to 7 pm. Every day a poor soul calls with a Nissan or Toyota or Korean car with CVT Transmission problems and most of them are out of warranty and still paying for the car. They end up with a not usable car which they are still paying to the bank. As they dont have 7 to 8 thousand dollars that the transmission cost here plus instalation and re programing. This transmission has been out from 2003 or so, almost 20 years and still is junk. There is nothing that can be done. I consider any car with it a disposable car.
I had a 2011 outback that started whining. Subaru garage said it was fluid pump failure. I told them to make repair and they said they don’t repair them. They quoted me a factory authorized used one for $2800 plus labor. I found a garage who got one from a junkyard and installed it for $1200. Drove the car for 232,000 miles and its been passed to two other family members.
WOW not only did you give clear accurate info I can understand you thru the entire video great audio and camera work, you get the instructor or the year award!!! 😀👍👍👏
Thanks! More to come
Thanks for taking the time to clearly explain how these work. We bought a 2010 Sentra new and it has 155k miles on it and still runs quietly and smoothly. I never changed the CVT fluid until the warranty expired at 120k miles. At that point I drained the gallon that comes out and replaced it with Valvoline's fluid. Drove another 10k and did it again. I did it a second time at 140k. So far, so good. I mostly use the car to commute to work at 80mph and have not had any issues. I can see how higher performance cars would eat up such a simple belt with too much power. I'm hoping our Sentra just keeps on running since the resale value is low, but the car still drives like it did 10 years ago.
For the next CVT oil change, try out amsoil transmission flush. What oil you use is up to you👍
That just goes to show you can't believe everything you see or hear
CVT's are great for cruising long distances on the highway at 80 or 90 mph in a lightweight car. What seems to mess them up is racing full throttle from stoplight to stoplight like I see a lot of Nissan owners doing, especially in the heavier SUV's. I know it's fun to be able to beat Audis, Camaros, and noisy Subarus from light to light with your Murano, but if you do that a lot, you'll end up in my buddy's transmission shop with bad news. Those transmissions are not made for racing.
Yeah, I would change that fluid every 40-60k miles. It's cheap insurance for any type of automatic transmission.
@@jackandblaze5956 if you can't prove it, dont say it.
My wife's Murana CVT failed just out of warranty. 5K to replace it. I will NEVER buy Nissan again, and will try to avoid overly complicated and unproven tech in cars
I was considering the Nissan Pickup truck. Providentially, I met a friend at the auto show, in the Nissan corral, who told me all about his horror stories owning a Sentra. Took his advice and bought a Ridgeline instead. Absolutely love the truck.
Been on CVTs in Nssans and Infinitis since 2010...
Or buy manual cars. If you have to have automatic then get something that isn't cvt
The CVT technology has been and still is the transmission method in snowmobiles, golf cars and ATV’s for years. But not hp as high as a car. And they use a rubber belt.
@@tomrogers9467 The problem isn't the steel belt, its Nissan North America marketers taking pressure from reviewers who demanded that CVTs feel like they're shifting and essentially programmed in a self-destruct mode to keep those reviewers happy (remember: reviewers seldom if ever put more than 500 miles in anything they're reviewing)
if you can feel "gearchanges" in your CVT, then take it back where you got it from immediately, because it will grenade in short order
one of the most comprehensive videos on CVT transmissions! keep up the good work. thank you.
You are welcome
Dude you have a gift for explaining things. So clear and easy to follow!
Yes..but he has a gift for being incorrect. I know lots of people that have Nissan cvt transmission.. some have well over 200,000 miles.. with the original cvt. It's all in the maintenance
@@tonygarrett9115 my (insert x relative here) smoked like a chimney and is 90 years old so people who say cigarettes kill people are wrong
As the owner of a Nissan maxima with the original cvt. With 245,000 miles. I get sick of car maintenance TH-cam fake wannabes talk about something I've never had a problem with. You sound like an absolute moron. Like that other guy. Scottie lol
@@tonygarrett9115 scotty's got a phd, so he keeps telling us.:-)
Thank you for this post. I have a 2013 Jeep Compass with the 2.4. I think this is the CVT that is in my car. Also, a few Nissan (of course) and some models of Subaru. My CVT started going bad at about 25K. I took it back to the Jeep dealership multiple times as it was still under warranty, and of course, they could find absolutely nothing wrong with my car. Then, when my Compass went out of warranty, miraculously, they discovered I needed a new CVT. I have been a Jeep owner since 1983. CVT or not, I WILL NEVER BUY ANOTHER JEEP AGAIN.
I know better than to buy any vehicle with a CVT. BTW, the Compass is not a true Jeep. It is a Fiat. Stick with the Grand Cherokee, Cherokee, Wrangler and the new Wagoneer. These are true Jeeps and you won't find a mushbox in any of them. Don't let your bad experience with a pseudo-Jeep poison your mind against the real Jeep models.
@@NCF8710 Thank you, yes, Jeep is now Fiat. Over the course of 4 Jeeps since 1983, I have seen Jeep go straight down the sheet-hole. But even the new Jeeps are not worth buying.
Good decision, ALL new Jeeps are garbage. Anyone who says otheriwse doesn't work on them. Anything and everything produced by FCA is trash, and Chrysler was already ruining the Jeep brand before Fiat came along and made everything worse. Jeep hasn't made a vehicle worthy of purchasing since they killed the 4.0 inline 6 and even before they killed it, they made it less reliable each year by using cheaper innards.
@@rvierra7235 I disagree. In May, 2016 I traded in my 2002 Grand Cherokee with 252,000 miles on it for a 2016 Grand Cherokee with the 5.7L V8. One month later, I bought a 2016 Cherokee with the 3.2L V6 for my wife. Mine now has 76K miles and all it needed was tires, brakes and wiper blades. Hers has 67K miles and it needed tires, brakes, a battery and wiper blades. Other than oil changes, these vehicles needed no other attention. They look and run like new and right now, there is no reason to trade them in. These are the two best vehicles I have ever owned. And to put this into perspective, the first new car I bought was a 1973 Ford LTD Brougham. I have owned quite a few vehicles in the past 50 years.
@@NCF8710 I understand. I have only owned 4 Jeeps since 83, all purchased new. So I guess I would not know what I am talking about in the least and you would. The Cherokee (the real Cherokee) was last produced in 2001. If you are refering to that piece of shit "new generation" chair-oh-kee, this conversation is over. There are easier ways to display your lack of subject knowledge matter, rather than doing it on YT.
Great Video. I found it quite easy to add an additional transmission radiator to my daughters Altima. Takes an afternoon but adds additional fluid and cooling capacity to the system for minimal cost. I paid $60 for mine. You just splice into the coolant return line leaving the existing radiator.
Change fluid 40000km 25000miles the fluid is black like engine oil. Upgrade cooling is a good idea. Don't drive it like race car. I think it can't handle 24 hours of lemans.
Absolutely. The only thing you can do for these Transmissions is to add a cooler
This is hands down the best explanation of CVT transmission of the whole internet. Thanks!!!
I'm glad it helped!
Simply excellent video. Outfreakingstanding. To the point, clear speaking, no wind noise, logical approach, not jumping around in topic, etc. Dude this is top notch TH-cam high level instructional technique.
I had the impression CVTs were simpler than traditional transmissions. This video convinces me CVT isn't simpler than anything except maybe a moon landing. It also helps me understand why electric cars, with no transmissions, are so popular.
Moon landing... Heh heh
[beavis & butt-head gif]
@@podulox Epic reply, sir. Epic.
I dont know why they don't just make something like an Owen Magnetic now
@@autismion The Norwegian one?
@@podulox One of them was shipped to someone in Norway once, but they were made in USA from 1915 to 1922
I've never had it explained so clearly as this Gentleman, the best video in year's on failure of this Transmission"
Really, what a Great video! Well done. I had two different V6 Altima's bought new, liked the car liked to drive them. kept them like new. A month out of warranty the alternator went out. after finding out that I couldn't change it out the dealer ripped me for $1025.00 to replace it. Got pissed the next day and went and traded it on a Tahoe. I told the dealer about it and found out he used to work for Nissan. He asks me if I had any trouble with the transmission and I told him no. He told me that I was lucky and that around 40,000 miles they start giving problems. When he told me how many Transmissons a month that they replaced i was glad to see it go. After watching this great video, I can see the weak links. PS, I will never buy another vehicle that I cannot change out an alternator on without tearing into the AC unit !
Sadly, alot of cars require severe disassembly before replacing basic things like an alternator or starter. That's how the industry is moving towards.
Despite the "failures" these Nissan transmissions have I will honestly say they are very interesting with all their little parts on the inside
They sure are mechanically interesting
@@speedkar99 thank you for the video. I have a 2012 nissan altima and I at least have a better understanding of my transmission
Yep. Just like a miniature train wreck.
@@chuckschillingvideos Standard test when they first came out was a rubber hammer smacked against the bottom of the trans, if it made a jingling noise it indicated there were broken belt links lying in the sump!
@@teenaramsay2469 I'm so glad I finally convinced my wife to trade in her Pathfinder.
Absolutely astounding! The guy is a natural born teacher and superlative explainer. Imagine what he could do with a laser pointer vs. toothbrush..... Ok so how do we promote this guy? Make him take editor of You Tube technical videos! you are the BEST
I listen to you while I’m working. I find the soothing explanations help me focus. I work a desk job.
For real ...I thought my voice is annoying lol
You make by far the absolute BEST videos I've ever seen! Straight to the points, no excessive banter, filler, fluff, or unrelated rambling on. Very concise and detailed. Thank you!!
Note the tiny oil cooler. A lot of failures that happen while climbing hills, towing, etc, are heat related, and result in the trans going into limp home mode. A neighbor who didn't have the money to replace the trans or the car (09 Altima) had this issue. I put a big B&M trans cooler on it 4 years ago and it's still going strong today, even through Vegas summers. I realize this isn't in a shop's best interest as a repair, too much liability, but for a low budget repair, it may or may not be an option for some people.
09 2.5 Altima. Exact same fix. Running fine.. Thanks everyone on TH-cam for once and for real you guys were right. This $50 fix works.
The next gen CVT from Nissan is much improved!
@@CaliRob281 There was a mole in Honda engineering.
Cooling is the area in which manufacturers like to cut some corners, it seems. Especially when it comes to transmission cooling.
Im having this same problem right now, with a 2013 nissan sentra. how much did the aftermarket cooler cost you?
This man has entirely too much knowledge about an unrepairable transmission.
Well if there were parts available you could repair it..there is nothing unrepairable
@@St0RM33 You're right. However, when you look at it from a Time versus Money perspective, it's simply just better to replace the transmission versus repairing it
What I was thinking. But I am impressed. He does a great job explaining it.
I was thinking the same, but it was quite interesting
@@St0RM33 If there are no parts then it is indeed unrepairable.
I found some forums where people added an external transmission cooler and replaced the fluid, and that seems to help a lot with Nissan's CVT
yeah Nissan has heat issues in general. You need an oil cooler, trans cooler on the 370z 7AT setup.
@@07wrxtr1 They do. Lol Look at the leaf.
@@07wrxtr1 those cars are an embarassment to nissan
@@tommurphy4307 The 350z/370z automatics are not bad, BUT - the kids that modify the SNOT out of them will run into inconsistent shifting patterns when the transmission is hot. This can be mitigated with an external transmission and separate oil cooler. I would not "lump in" the 350z/370z into the same arena as the POS leaf/rogue/maxima/altima/sentra/etc that used the CVT's. Those things MUST have fluid changes every 20,000 miles, but, - Nissan failed in: 1) Training the dealerships to actually recommend, advocate, and encourage such service 2) Nissan failed in properly TRAINING the dealerships HOW to do this properly (there's nuances to it, so it's not just your "boring" every day drop fluid, fill fluid mindless mouth breather low iq I'm hungover on a friday braindead mechanic service move 3) Nissan decided to GAMBLE in that, it believed that owners would simply trade/buy another nissan before the 60k/5 year "powertrain" (stupid name but whatever) warranty would end. 4) Nissan underestimated the failure rate 5) Nissan decided to try to copy toyota/honda - in pushing volume/value > reliability - I'm sure many former nissan owners are now in Toyota/Honda products 6) The 370z/350z/GTR are still 100% designed/manufactured in Japan - I believe cultural differences actually DO still count, as I'm sure more US/Mexico manufactured vehicles have higher defect rates - while you can outsource to lower cost countries, that cost cutting eventually shows up somewhere. 7) Even so, "some" 370z owners have "experienced" 7AT (7-Speed automatic) transmission failure - some are racing, some are doing auto-x, some are doing road course, and some simply had a BOTCHED dealership fluid change after begging the dealerships to replace the fluid, and having received the LOW IQ / MOUTH-BREATHER "It's a sealed transmission.." speech. 8) "Not all" (I hate that phrase too, women use it too often haha) - Dealerships actually have on hand the "CONSOLT" tool used to increase transmission fluid temp, in order to PROPERLY change the fluid on the automatics for the 370z 350z's. 9) The 7AT has a design flaw in that Nissan/JATCO - decided to use rivets in certain areas causing uneven wear and failure. Also - the flex plate tends to crack/fall apart, causing debris to "work its way" into other parts of the transmission. 10) Nissan dealerships have some of the highest turnover rates among any vehicle manufacturers out there. So, every time you do bring your car in, you may see the same smiling "service managers" face, but, the dudes that actually do all the work all day long are usually high on drugs/alcohol/"new"/or on their way out. It's worse than your typical retail banking branch. I believe Nissan should put in place an aggressive retention and drug/alcohol/talk therapy program for anyone who works within the dealerships, and also not allow for > 50 hours per week; Simply provide better reasons for people to stay longterm so you don't get a DRUGGIE working on your vehicle who then thinks it's "funny" when you call as a customer asking for your car back after it's been 6+ weeks when you were told "2-3 weeks."
So - my advice/conclusion: Anyone buying ANY automatic from ANY manufacturer - Just pay that additional $15 per month for a separate mechanical breakdown insurance rider. Do not play the: "It's not my first rodeo bucko!" and think for a MOMENT that your standard insurance policy will magically cover you. It won't. You MUST PAY EXTRA for a separate POLICY. Not all insurance companies even offer this. Do not confuse it with a retarded/moronic/pointless/overpriced/scams r us "extended warranty" either. Do not rely on the "stupid" "power train" (why is it called such a stupid name!?) "warranty." You don't want to be stuck driving a rental vehicle for 6-8 weeks while Nissan tells you "Yeah, we don't know where your new transmission is... we lost the tracking number..." You also don't want to be the ginnea pig either - as very very very few Nissan dealerships have experience actually changing / replacing the transmission SPECIFICALLY on the 350z or 370z. They have TONS Of experience on the other models, but, they will LIE TO YOU, and lump YOUR car into that group, and you'll be stuck with a retarded Nissan sentra for 6-8 weeks. Which - for the record - A school bus has better brakes than a stock 2019 "new" Nissan sentra.
Had a 09 Altima Hybrid for 7 years, and now a 18 Rogue for 3 so far…no issues with the Altima in the slightest. Had 188k when I traded for Rogue. No issues thus far. Towing occasionally with rogue. (Under 1000 lbs). 56k in rogue now, but considering an aftermarket warranty.
This video was very eye opening. Well done!
Thanks and yes I think you should get rid of the Rogue altogether. Aftermarket warranties are the biggest scams with too many limitations.
Aftermarket warranties are the most scammy of scams. Do yourself a favor and get something else. CVT are fine for smaller, lighter vehicles like an Altima and such. Rogue is starting to push it, doubly so if towing anything. You've been warned.
How often you drain and fill fluid
I'm shopping for an aftermarket waranty for my daughters Nissan Sentra. I've yet to find a company that doesn't excluded CVT's from coverage altogether!
"There we go, busted a nut." LOL! This video really made it clear to me how one of these things work.
Lol haha
I'm in the UK, we used to have DAF cars running around back in the '70s. They had the original CVT, most people called them elastic band cars. The belts were rubber just like a fan belt. They were long and ran under the car. A pair of variators at the front and the back of the car. These were open, not enclosed in a gearbox. But ran front to back in the transmission tunnel. They were odd little cars that were as fast in reverse as they were forward. The Dutch raced them backwards, back in the '80s. Great fun but dangerous as all hell.
Sounds like a lot of fun XD
This is the best CVT video I have ever seen! (ASE Master x 25 years and AAMCO transmissions manager x 3 years)
I had a Nissan Murano with a CVT. I LOVED that vehicle. Comfortable, nimble, roomy, durable, fun. It was just great.
The reason I got rid of it? The CVT failed. After 188,000 miles. Which I suppose isn’t too bad. But still.
My altimas failed at 150k. Luckily had extended warranty that covered it
The real miracle here is that he could find his 10mm socket.
Agreed
He probably keeps it in a safe....
damn, that's funny!! any car mechanic can appreciate that
Check your friends toolbox, that's where YOUR 10mm is
@@WhyZ_Guy hah, no doubt!
As an old Trans builder you did an excellent job of explaining a very complicated subject very well. I can't tell you how many TH 350's and 400's along with c4 and c6 I have rebuilt... I would say in the thousands... I use to know where every spool valve, spring, ball bearing, clips, seals went... I made really good money when I could rebuild a trans in two hours... Really loved my job back then... Now I'm to old to do much of anything...
No you're not too old Brian. Get out there and get it done
Two hours? You truly are a very skilled man. I'm sure you were a big deal to your customers and coworkers.
@@sand0decker Only two hours per transmission that may be why he cannot do much anymore he is burned out and body broken....
Never too old to teach.
@@SuperNoticer I’m 76… takes me an hour to get out of bed! 😆
I thought CVT meant constantly vulnerable transaxle. Oh well.
LOL
No, you were right.
No I think you mean CV axle
Continuously Vulnerable Trashheap
XD
Wow, that was honestly one of the best vid's I've seen on YT. After explaining, you actually dug deep and showed as best as possible the HOW and WHY.
06 Murano with a trans replaced at 118K under warranty and once this one dies for good its the last Nissan ever. Great video and presentation, Masterclass.
Best advice I've read has been to get in there every 40K and replace the trans fluid with a good synthetic. Don't follow the Nissan spec'd duration for that.
You are welcome 😁. I have another CVT video for that Murano transmission if you like to see it.
Really impressive amount of knowledge - thanks for taking the time and stepping through it all. I've got a CVT in my Subaru and always wanted to know how it worked. Fortunately Subaru extended the warranty on my CVT to 10yrs/100k miles so that's something.
Glad you appreciate my work
Subaru doesn't seem to have much trust in their CVTs if they only have a 100k varranty.
@@I_THE_ME how so? That's at or above most drivetrain warranties.
@@jasonmiller2570 100k sounds almost like you were saying kilometers and not miles, maybe thats why he was confused, because yea 10 years, 100,000 miles sounds like the standard warranty issued by most of the companies out there today, at least for honda, toyota, subaru, kia and hyundai, which are the ones i can think of off the top of my head that have those warranties.
@@compzac ya maybe. Anyway the Subie turned 10yrs old this year and still runs like a champ.
speedkar99, your grasp of this transmission, mechanics AND language skills are amazing.
scotty must be smiling rn. he hates CVT
Even Toyota is using (Aisin) CVTs now, but I’ll bet they’ll last, where the JATCOs used by Nissan don’t.
And he's right they are an unfixable endless money pit!
And we hate scotty
Why do people trust this guy’s opinion so much...he’s experienced is built solely from things that go wrong 😑
@@air-headedaviator1805 well, if you repair things for a living (I do), you get the idea what fails most frequently, and what is the cause of failure. After some time, the patterns develop. When you are describing patterns from your memory only, your opinion is not worth much. In order to get your personal bias and your memory problems out of the equation, you need to back up your opinion with hard data (like the computer entries about failures in the last 5 years for a particular car model). Once you have done it, your opinion becomes a reliable source of information.... I'm pretty confident that this guy knows what he is talking about, and he most likely looked at hard data in forming his opinions...
My Pathfinder is 10k KM 2020 model 1st owner, I noticed a CVT little shuddering issue since beginning, and the local nissan dealer insisted that this is normal! By the time the car went out of warranty, now shuddering is very clear. From my standpoint, Nissan Japan pushes dealers over the world not to expose those kind of issues to customers, and so they used to them, till the warranty is end up. I believe this is aligned with Nissan statement "Our mission is to enrich people's lives"!? It was one of the worst decisions I've ever made to trust Nissan😢
If this Man isn't an auto shop teacher he's missing the vocation he was born to do.....
AMEN!!! But it would be a 50% cut in pay...
is the CVT in the 2017 Subaru Forester the same Jatco unit used in the Nissin and do failure early on?
What is a lineartronic CVT ?
he is better at these videos.
Unbelievable explanation, I felt like I have just been through a MasterClass in CVT transmissions. My Nissan Cube has a CVT and this was a great video on why I should drive it off a cliff if I ever have a transmission failure. Now I'm off to replace the transmission fluid, and pray to God's of NISMO!
The best explanation of the CVT transmission on TH-cam! You did a great job.
Wonderful explanation. Gave a crash course about the techie part to a rookie like me. Have driven Nissan Tiida, Altima, and now X-trail/Rogue. Drove all to 150k and sold without any problem. Now in Xtrail which is at 135k, have started giving me jerks in the up-gear while I'm stuck in traffic or at a signal and pick up. Hence dove into this research to understand the CVTs.
Loved that humor 16:53 - "A fail that will make your transmission stuck in reverse and then you're literally going to be driving back to the dealership"
That was the funniest part! Everytime he talked about the brother's gym pants, and then his wife's whatever I was laughing. Then he pulled that reverse, hah!
What i have witnessed working for Nissan several years ago was sales people telling buyers "Oh its a sealed transmission, no maintenance at all" thats a lie out their ass and it infuriated me. Thats why majority of CVTs fail, not the proper maintenance.
Salespeople are like others, they act in their own interest. If more vehicles fail, that's more potential sales for them down the road.
Exactly this. I even had a service writer at a Nissan Dealer tell me that I didn't need to change my fluid at 40k. It just needed an inspection. I told him there is no such thing as lifetime fluid and made them do it. Fluid went from dark/dirty green to bright green. I, however, turned down their stupid 40$ cabin air filter they were pushing.
You are on your own after the warranty which is how long these are designed to last. It's in their interest to sell you another car after that
@@speedkar99 only an idiot would buy another car from a manufacturer that failed right after the warranty was up
@@dynamo3059 No manufacturer wants you to keep driving their car for 30 years. Bad for quarterly profits.
“....and you will literally be stuck driving ‘Back’ to the dealership “....Pwahaha good one!
Was just gonna say 😂
Best low budget CVT technical explanation bar none, carboard, toothbrush, old garments and all.
This is the EXACT transmission that I had fail on my 2005 Murano TWICE in 125000 miles. Thank you for making this and explaining the inner workings of these transmissions!
We had a 2008 Altima 2.5 that lasted 200k miles with the original transmission. We sold it to my uncle who is still driving it 60 miles everyday to and from work. I don't have any clue how that little transmission is still alive.
Because it was a 2008. Nissans we’re more Japanese then. Now they’re Renault, mostly. Big difference. They’re trading off their old rep, and people are expecting the same from these new ones. And they are disappointed.
It's been said many times in your comments, but your fluid momentum and hands on knowledge of the automatic/CVT transmission, make this such a pleasure to watch. Subscribed. Thank you.
The Variomatic Daf transmission was developed in 1958 and found on Daf cars, it worked very well, it was a simple system and it is still in use today.
Some of them went the same speed forwards as backwards. So we had reverse races back then with the DAF 66.
@@mistersunny3636 okay, hooper- put your hands behind your back. now answer just one question- why did you drive the car into the bay?
fixed these for years and years at a transmission shop . You can get parts . He did a fantastic job explaining how they work . He should be training guys how they work
The older I get, the more I appreciate the virtues of a stickshift..
You can't even buy one anymore... So sad I still love Manual stick shifts
@@josephschultz4097 Can still get some Mazda’s with a manual. Really most cars that aren’t American are available with a manual as an option.
So, if you really want a manual just do the searching and you can find them.
@@josephschultz4097 My new Versa is a stick for this exact reason. It's able to burn rubber on 1st.
@@diegosc985 a friend has a 2014 Versa that's been horribly wrecked twice and most of the nearly 200k miles is cross country trips. Engine still purrs and transmission/shift assembly still feels vague and unsatisfying to shift just like new. It's impressively reliable despite the abuse.
I honestly don’t miss my stick shifts these days. If I want there is a semi-manual flappy paddle manual system on my current car but I had one quick go with it, found that the dash display tells you when to shift and then thought “if you are going to follow the car’s suggestions then you might as well be on auto anyway” and went right back to full auto.
I remember being blown away when I first found out the CVT belts in these were "pusher" belts, and not "puller" belts...
Prob thank mgt for that. ......
It amazes me that you can remember how to put this back together.
I'm guessing he won't be putting it back together considering he sawed off those big nuts. It was probably bad already.
Play video in reverse
"This is gonna be a dirty video." Priceless.
This was pleasant to watch, and well presented. You sir, get a like 👍
I've rebuilt a few auto trans, a couple old school manuals, and I had a pretty good idea of how these CVTs work. But it was nice to finally see one completely pulled apart, without having to do it myself. Thanks for taking the time.
I know, it's weird to think a metal belt *ever* made it out of the boardroom and into production right?!! Lol! Everyone claiming they were the future, THE ULTIMATE IN EFFICIENCY! Yeah, super efficiency.. in spare trans sales 🤣🤣
The CVT in my 2018 Maxima is incredibly fun to drive compared to other similar horsepower cars I've driven with standard automatics. I'm no mechanic, but I do know when you put your foot down the car goes like a rocket until you take your foot off the gas. There's no jerking through gears, just seamless and smooth acceleration.
I know everyone hates them, but I like how they drive. If it fails, it fails. My 2014 Tacoma transmission, which is supposed to be bulletproof, died after only 115,000 miles with regular scheduled maintenance and never towed anything with it. Also the rear leaf suspension rusted out and squealed, the frame rusted through and it was garage kept.
All these videos make it seem like these CVT transmissions are failing left and right but I see more 5 year old Altimas, Maximas, rogues, and muranos on the road than almost any other car.
I have driven an Altima 2011 and it's so smooth, zero problems with it but I get so scared by people talking so much crap about CVT
@@chaosdimension6433 well the altima was kinda the spear header for the nissans CVTs are crap argument because in 08 when they first started using them they didnt even bother with a transmission cooler at all, so not only did premature wear happen pretty frequently, but another fault was that the car would go into limp mode and tell you the trans was overheating, that being said i hate the Nissan CVTs because toyota and honda have been making CVT equipped vehicles for longer (honda insight, hybrid civic and the prius) and their CVTs havent got such a horrible reputation. But ive had a 07 nissan sentra with a CVt that works well enough
That being said the Op is the second person ive seen that mentioned how fast the CVTs change ratios and ive never seen that happen both a 12 maxima and my 07 sentras go through the ratios really slow compared to my 2011 fusion and my partners 2018 330I BMW, especially on kick down.
Don't be the guy that says "mine works fine so there can't be a big issue". Your's is 2018 but they have been failing left right and center for years since they came out it's just a question of when, even nissan acknowledged it at some point. If you have vq35 or similar, it's simply too much power for such a trash transmission. You've been lucky, My 2012 maxima 350 transmission was serviced regularly and it still failed, crazy quotes to replace transmission even if i could find one with low km's or in better cond than the old one. Even my mum's Juke which has a cvt is starting to show signs of transmission issues and she has been gentle as with it and religiously had it serviced at Nissan. At least a regular transmission can be repaired if it fails and it doesn't spell the end for the car. Obviously it won't bother you until your car becomes a lump of scrap metal because of one aspect of the car failing due to bad design.
@@mrgreen6374 Hi. You've hit the nail on the head with your "at least a regular transmission can be fixed, and your car is not wasted". Manufacturers are constantly coming up with ways to make these things unserviceable/DIY-able. The manufacturer (through dealerships) want more of your money spent on their product. If it's not buying parts/repairs it's buying another vehicle. If you don't have the tools, the knowledge or the parts required to fix/repair their product, you have no choice but to go back to them. *Edit ....or someone else, which is why some of these manufacturers are now going broke. Nissan has half the reputation it used to have, (where I come from) Mitsubishi also.
yup got a 2015 versa and so far its running great just need to change the cvt brake and oil fluid soon
Thanks for this great video! As an Honda with a CVT owner, you taught me everything I need to know to make it last. Very useful!
Wow! I wasn't expecting such an in-depth teardown when I clicked this, that was extremely interesting to see. I knew the general function of CVT transmissions having worked on snowmobiles and the like, but never had one disassembled in front of me or had it so expertly explained. Excellent video! Thank you!
It was a great video! I have also dealt with CVT for my snowmobiles over the years. The big difference is having a simple spring loaded pulley system CVT based on centrifugal force and a user changeable rubber belt! It's easy to work on and mechanically smarter that the complicated Nissan Jatco CVT. Makes sense to change a rubber belt once every couple years for $150 versus a $5000 CVT but I get that the weight of a car requires all the complex hydraulics and cooling.