Also I was thinking about putting a bank's big ass air on my L5P I was just wondering why you went with Werlhi rather than banks and then also I was getting ready to put a 5-in muffler back pipe on my L5P and I'm just wondering if you have done that also
First time I saw one of your videos it was for the wehrli valance cover. Love the look and had to have it for my 2019 Chevy truck. Question though, how is your pedal monster and AMP steps plugged in at the same time into the OBD port? Thanks for the tutorials!
Pretty much same truck here. Are those LEDs just plug and play? Do you have any issues with the old halogen light housings? Was your truck LED before you dropped those in?
@linksgarage1985 I have a 17' Duramax L5P with a HP tune as well as a delete, would you recommend me to install the banks monster exhaust even though I am not running a Banks tune? its just straight piped with an aftermarket tip right now.
I like the werlhi brand and I was just wondering why or if you put a intake horn on the intake I seen you got an air intake but I didn't see a intake horn at the end they look like you had the stock intake going on just wondering if you were going to put that on there too
Yes. It has Wehrli 3.5 inch intake horn, intake, Wehrli hot side and cold side piping etc. The intake horn was the first thing I did. All install vids on the channel
@@linksgarage1985 WC offers a few silver powder coatings options that look like it would match the other stock silverish grey parts or just go with plan old flat black. I like the stock look and plan on keeping the stock filter box also. Thanks!
So I was wondering, if you plan on getting those LED door handles? Those are sweet looking & you can get switch back to work with your turn signal. Also, when you did the lighting in your Tow mirrors do those work with your signal, or is it just stationary light?
@@linksgarage1985 I watched the video, I'm thinking about getting the switch back ones, but I was wondering it's possible to have them work with the signal too? I know they don't stock.
@@linksgarage1985 you aint lyning man! I heard the prices went down some, apparently u can get everything for around 4k. But still thats a big penny lol. I appreciate it a lot man thank you, that means a lot to me bro!!🙌🏾💯 keep em up man!
Hi again, have you ever thought about doing wheel well lights? I’ve been thinking about adding them on my Duramax. Love my Diesel LEDS and thought this might make a good addition.
I’m going to be 100% honest. Ive thought about Rock lights. But, I’m almost 40 years old. That’s just ain’t my style. I don’t knock it. Everyone likes what they like. Do what drives you man! I’ll support it. 💪🏼
Dude that's such a badass looking truck. I've got a stock 17 and I just commented on your installl video for the pedal monster about your wheel and tire setup but now seeing this one I'm making a goal list lol. Again real nice rig
@@FromTheRuff yes. I have the Banks derringer, banks pedal monster, banks triple gauges, banks diff cover, banks monster exhaust, as used to have the banks ram air intake( it was awesome) I only went with the WC fab intake because it could be power coated. All of their stuff is killer.
@Link’s Garage My man, I really appreciate it. I literally just bought everything you said aside from I already have an S&B intake on and that's gotta go just not happy with it. Can't close mt hood without easing it down and slamming it closed. Took it out and put it back in a few times and they won't exchange it plus I heard a video of that stage 3 combo from wc fab and damn it sounded great.
So I got a question about the L5P I just bought one 2021 and it's got like a knock or a tick or something on the if I'm inside it's on the passenger side is that normal for duramax's to have that knock or tick I kind of heard it in this video when he was outside filming the lights but it's just sounds like a knock or a tick and I'm just making sure that it's the good or that's what's supposed to happen to a Duramax
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
Badass rig brother🔥
Thank you!
Also I was thinking about putting a bank's big ass air on my L5P I was just wondering why you went with Werlhi rather than banks and then also I was getting ready to put a 5-in muffler back pipe on my L5P and I'm just wondering if you have done that also
I had a banks. Just went with Wehrli because it all matched the powder coating. And yes. It has a banks 5 inch monster exhaust also.
@@linksgarage1985 ok yea I like all the werlhi products and will get all the pipes but I think I will go with banks on air intake and exhaust
I have the 17 with l5p and would definitely recommend delete. I have the pedal monster and amp steps. great upgrades.
Yep. It’s the way to go.
First time I saw one of your videos it was for the wehrli valance cover. Love the look and had to have it for my 2019 Chevy truck.
Question though, how is your pedal monster and AMP steps plugged in at the same time into the OBD port? Thanks for the tutorials!
What up boss! Any update from your Duramax?
Got a new small project incoming. Hoping to get done this weekend!
Where did you get those mudflap deletes? Thanks!
Pretty much same truck here. Are those LEDs just plug and play? Do you have any issues with the old halogen light housings? Was your truck LED before you dropped those in?
My lights were not LED. They are plug and play. Still love them to this day. Here’s a full install. th-cam.com/video/jNQd18tinas/w-d-xo.html
Truck looks great Linkavage..
Thanks Montucky!
🤣
How tall is your garage. My super duty just barely fits. A six inch lift and I would be parking outside.
My door is 8ft tall
@linksgarage1985 I have a 17' Duramax L5P with a HP tune as well as a delete, would you recommend me to install the banks monster exhaust even though I am not running a Banks tune? its just straight piped with an aftermarket tip right now.
You just looking for a muffler? If it was me, I’d keep it straight pipes. 💪🏼
I like the werlhi brand and I was just wondering why or if you put a intake horn on the intake I seen you got an air intake but I didn't see a intake horn at the end they look like you had the stock intake going on just wondering if you were going to put that on there too
Yes. It has Wehrli 3.5 inch intake horn, intake, Wehrli hot side and cold side piping etc.
The intake horn was the first thing I did. All install vids on the channel
WC tubes or just go with Banks?
Both are great. I did WC because I could match all the colors. Banks are a bit larger I think. Cant wrong with either.
@@linksgarage1985 WC offers a few silver powder coatings options that look like it would match the other stock silverish grey parts or just go with plan old flat black. I like the stock look and plan on keeping the stock filter box also. Thanks!
@@HCSemtex very welcome!
great rig brother !!!
Thank you!
So I was wondering, if you plan on getting those LED door handles? Those are sweet looking & you can get switch back to work with your turn signal.
Also, when you did the lighting in your Tow mirrors do those work with your signal, or is it just stationary light?
I haven’t seen the door handles you’re talking about. But I’ll look in to that. And I wired the lights to just be stationary. I have a video on it.
@@linksgarage1985 I watched the video, I'm thinking about getting the switch back ones, but I was wondering it's possible to have them work with the signal too? I know they don't stock.
Are you still running the CAT fuel filter?? If so, any issues with fuel pump etc.??
Swapped to PPE. And zero issues
@Link’s Garage where did you find a PPE fuel filter?? I'm running the PPE oil filter and spin on Trans filter but can't find a PPE fuel filter.
@@jeffmay8932 man I’m sorry! I thought you did oil filter. My apologies! Yes. Still running the CAT fuel filter. And zero issues!
@Link’s Garage awesome!! Thanks for the info!! Love the truck videos, keep up the good work!!
@@jeffmay8932 thanks for watching! I appreciate it!
Pedal monster is worth every penny. No more dead pedal. It doesn't add additional hp or tq, but one could be fooled.
Totally agree.
Them tail lights still working out?
Yep. No issues.
Would u ever tune your l5p?! Great video man!
Hell yea I would!!!!! But man it’s so much $$$. Thank you. You’re channel is a big inspiration! 💪🏼
@@linksgarage1985 you aint lyning man! I heard the prices went down some, apparently u can get everything for around 4k. But still thats a big penny lol. I appreciate it a lot man thank you, that means a lot to me bro!!🙌🏾💯 keep em up man!
@@EVERYTHANGDIESEL you do the same my brother! Looking forward to the new vids as always!
@@linksgarage1985 most def man! I'll be dropping them again next month!
Where did you get the black emblems?
I made them
Hi again, have you ever thought about doing wheel well lights? I’ve been thinking about adding them on my Duramax. Love my Diesel LEDS and thought this might make a good addition.
I’m going to be 100% honest. Ive thought about Rock lights. But, I’m almost 40 years old. That’s just ain’t my style. I don’t knock it. Everyone likes what they like. Do what drives you man! I’ll support it. 💪🏼
Where did you order your black badges?
I made them! But I believe you can order them. Prob way easier. Lol. Check it out .th-cam.com/video/538lehRAoNU/w-d-xo.html
Dude that's such a badass looking truck. I've got a stock 17 and I just commented on your installl video for the pedal monster about your wheel and tire setup but now seeing this one I'm making a goal list lol. Again real nice rig
Thank you! It’s been great for me!
@@linksgarage1985 yea buddy, do you have the derringer as well with the pedal monster or no tunes just the throttle controller
@@FromTheRuff yes. I have the Banks derringer, banks pedal monster, banks triple gauges, banks diff cover, banks monster exhaust, as used to have the banks ram air intake( it was awesome) I only went with the WC fab intake because it could be power coated. All of their stuff is killer.
@Link’s Garage My man, I really appreciate it. I literally just bought everything you said aside from I already have an S&B intake on and that's gotta go just not happy with it. Can't close mt hood without easing it down and slamming it closed. Took it out and put it back in a few times and they won't exchange it plus I heard a video of that stage 3 combo from wc fab and damn it sounded great.
@@FromTheRuff yea. I have the 3.5 inch intake horn, hot side and cold side turbo piping, and full WC intake. Sounds great!
Any questions, just ask! Install videos in description.
what size rear block are you running?
So I got a question about the L5P I just bought one 2021 and it's got like a knock or a tick or something on the if I'm inside it's on the passenger side is that normal for duramax's to have that knock or tick I kind of heard it in this video when he was outside filming the lights but it's just sounds like a knock or a tick and I'm just making sure that it's the good or that's what's supposed to happen to a Duramax
Just saw video for the 2024 duramax....new interior and 515/1085tq... If that's all true I'm gonna order onw////Miss my '18 LTZ
🤣
There one serious mod that still needs to be done
If you want to spot me $$ I’ll to it.
@@linksgarage1985 wish I could bro still recovering my that job on my 18
@@hatchetwarrior1240 hell yea
Truck is looking tough as always Link! Great video.
Thank you!!!! More to come!!!! I appreciate you watching.