How To: LG/Kenmore Gasket 4986ER0004F
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- How To Replace: LG/Kenmore Gasket 4986ER0004F www.appliancepartspros.com/lg-...
Symptoms: Hole or tear in gasket; getting water on floor
Tools: Phillips screwdriver, flathead screwdriver, knife, vice grip pliers
This LG/Kenmore made Washer Gasket replaces the following older part numbers on LG Washers: 1377588, 4986ER0004J, 4986ER0004K, 4986ER0004M, 4986ER0004N.
Buy the new Washer Gasket 4986ER0004F here: www.appliancepartspros.com/lg-...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
You can also get technical help on our repair forum forum.appliancepartspros.com/.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros - แนวปฏิบัติและการใช้ชีวิต
This is an excellent video because it shows every single step of the repair. Oftentimes, the "amateur" vids skip over the difficult steps!
Thanks! I'm glad our video was able to help you out.
I've watched several videos to installing the gaskets, and this is by far the best one I've watched! Very step by step, great camera angles, and love that you used tools that everyone has lying around! Awesome video man, thumbs up!
Delayed this job with a few goop patches on a tear at 6 o'clock, but dug into it today. Very glad I had this step by step guide.
I found a little dish washing liquid (very little) helped get the inner lip in place. Turned a pretty epic tug o' war into it just snapping in place. Didn't need it for the outer.
First load's done. Thanks for the dry floor :)
Thank you, I was having such a hard time getting the spring back on because I was not strong enough but you are the only video that showed how to do it with vice grips and I did it myself. Thank you, Thank you.
Nola Delariva You are welcome, glad the video helped you get the gasket changed!
Perfect. Would have taken me half a day to figure this out on my own. Your video turned this onto a 45min deal with minimal swearing! Thanks for the instruction.
Thanks for the hugely helpful guide. Just finished replacing the gasket on mine following your steps.
You're welcome. We're glad you found the video helpful.
Just did this repair today - slightly newer LG but the instructions are very helpful. Thanks
Glad the video helped you get the washer fixed!
Thank you so much for posting this video! Saved my husband and I a ton of money. Now we can use our washing machine!!
You're welcome!
Perfect video. Thanks. I followed him step by step and got the job done. Thank you for this video!
You're welcome!
I used this for an LG WM2050CW and it came in very useful. Well put together and detailed video. Thanks!
Awesome, glad you got the washer up and running!
Great job showing all the details
+Kevin Grant Thanks, glad the video helped you get the washer up and running!
thanks for the vice grip tip to get the spring clamp back on!
+Wayne Ly Glad the video helped you get the washer up and running!
best video for this repair, well done.
Thanks
Thank you!
Best video for this repair,
Thanks.!
You are welcome. If there is anything we can help you with in the future please let us know.
Great.video! Although mine was slight;y different (only one hose at the bottom and none on top) this video was perfect! It saved me tons of time and money. I changed the gasket because it was filthy and moldy (not leaking) - glad I did. I Noticed that bottom hose was pretty much blocked up. Luckily it was pretty easy to clean. Thanks for posting!
+Vickroy6 Glad the video helped you get the door gasket changed!
AppliancePartsPros p
Excellent instructions!
Glad the video helped you out!
Very detailed video, thank you very much!
justonemorecast Glad the video helped you get the washer up and running!
this video was awesome .. the spring and wire were a pain , pay close attention to what he says and the position of the outer spring . but all in all perfect repair and east to explain
Thanks for your feedback. We're glad we were able to help!
I did this replacement yesterday, and this video helped tremendously. The only inconsistency I found was that my washer’s control panel is held on by five screws in front, not four, plus one from the back. I also found that a bit of soapy water on the gasket makes it much easier to snap on the drum housing. I did struggle with the spring clamps, even using ViseGrips, as the gasket kept pulling away. For the door clamp I finally had success with “needle nosed” ViseGrips that made it easier to pull in the right direction.
Glad we could help! A single part can be compatible with hundreds of different appliances. We film the part on a single appliance model to serve as an example of the repair, but there may be slight variations in the process for different models. Thank you for letting us know how the repair went on your model.
I cannot figure out where those two extra flaps end up? Did you have any issue there?
I don't know what you're referring to. The gasket has two flap-like protrusions at the 11 and 1 o'clock positions but they're just part of the gasket design and stick into the drum a bit. My old gasket was the same. There were no "extra flaps" that I could see.
Thanks! My original gasket did not have those protrusions so I wasnt sure.
My guess is that they are intended to keep clothes from hanging up at the top of the door. LG has tweaked the design of these washers (and the gasket) over the years.
Video was very helpful. Question . . . It squeaks a bit when it spins and we ran a tub clean after installation and there is a gray residue that I'm assuming is the gasket. Is this normal? Will it stop squeaking?
Is the noise related to the gasket? The only thing the moves close to the gasket is the lip of the inner tub but it should not be hitting the gasket.
does this work for the LG WM2140CW ... i have leaking on the floor right in front of the machine and noticed a 1/2 tear in the front at about 7 o'clock
kamaksi24 The gasket on your washer is the same one in the video. There may be a few differences on the replacement steps though as your washer may have different features. The video should be a great help!
I have the above replacement part and am trying to use it on my LG RW2455HW. I was told this is the correct part. My machine does not have any hoses attached to the gasket. The new gasket has a connection at the bottom that already is cut out. Do I not have the correct gasket?
I have the same problem...
what is the model number for the fitting and hose that leads to the washer gasket? I don't know if my fitting and hose are cracked or just dirty. I definitely need to replace the gasket.
+Peggy Huang It is best to go to our website and enter your appliance model number to view the parts breakdowns to be sure you get the correct part for your model.
Can I put this part in my Kenmore Elite (Connect) washing machine? I spoke to Sears and they gave me the 4986ER0004F part number. I can use this LG gasket on my Kenmore washer, correct? They seem to be the same product even though Kenmore and LG both sell a different version (still same product number though). Confusing.
It could be you have a Kenmore washer made by LG. If Sears gave you that part number for the gasket then it should work. If you need to verify it you can give us a call with your model number: 1-877-477-7278.
The front lip boot seal goes bewteen the tub? Or completely outiside?
how do I reset the wash Cycles so that they work again I've lost White's casual quick wash normal
If you have already used the tech sheet to run through the diagnostics then I would recommend posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
That is interesting that you don't use the LG spring clamp tools that are specially made for this application.
Thanks
what do u do with the drain port at the bottom in the new gasket when my machine never had one
Did you ever figure this out?
@@kevinmoyer2409 Nobody has figured this out... can I pipe it to the crawlspace?
I don't understand why you removed the top electronics and the detergent tray...?
I bought 4986ER0004F the drain port at the bottom of the new gasket when my washer(LG WM2277HB) drain port on top what should I do?
Some washers have them at the top and some have them at the bottom. You'll want to take the fitting from the old gasket and insert it in the same place it was on the new gasket. There should be an appropriate space for it.
The old gasket has a hole on top and the new one on the bottom and have 3 different drain port with out the hole on top
You will have to cut a new hole into the gasket to insert the fitting through. That's explained in the video at about 6:05 : th-cam.com/video/C7Pz1LHDzYI/w-d-xo.html
AppliancePartsPros the hole in the bottom dose not cause leak ?
AppliancePartsPros LG WM2277HB
Is it possible to do this replacement without taking the front panel off?
To access this part you will have to remove the front panel.
My washer has started leaking water I checked the door seal and found 2 holes at the bottom position, of the seal. Are these for drainage?? Or could this be my problem?? Any advice please
Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
how do you remove a stripped screw at the bottom?
You can try to get more grip by placing a rubber band or duct tape over the top of the screw head, then unscrew it.
My washing machine starts jurking in spin cycle what' would be the problm
Am I the only one who cant figure out how to hold the vice grips and the other end with pliers with successes!! Is he a wizard, how is the other side being held!
There is no need to take off the top and door panel to preform this repair. Many other videos showing how.
This video was helpful, but getting that gasket in the right position with the drum was a nightmare. I didn't feel like the video explained this the best.
Still, it was helpful otherwise and helped to save some money.
Thanks