Connect the DUT: Connect the device under test to the curve tracer’s test leads. Set Oscilloscope: Configure the oscilloscope for XY mode (where X is the voltage and Y is the current). Power On: Turn on the curve tracer and the oscilloscope. Adjust Sweep: Adjust the sweep voltage range and current sensitivity on the curve tracer. Observe Curves: Observe the characteristic curves displayed on the oscilloscope. Analyze the shape and parameters of the curves to evaluate the performance of the DUT.
Tengo un problema parecido, la fuente de alimentación está bien pero aun así solo pita, enciende la luz azul y se apaga(además el ventilador gira). La placa es una SAF 006
Hola @MauricioLopez-mj9oe, gracias por compartir tu situación. Si la fuente de alimentación está funcionando correctamente pero tu consola sigue apagándose después de pitar, podría ser un problema con el APU o algún componente relacionado con el suministro de voltaje. Te recomendaría verificar los reguladores de voltaje y las resistencias cercanas al APU. Si necesitas más ayuda, no dudes en preguntar. ¡Éxito con la reparación!
Bro tengo joystick de xbox serie s. Y tiene drif le cambié los analógicos y sigue igual tendrás algunos diagramas y de reparación de fuente ps4? Serías amable 😊
For testing only heatsink will be enough that is what he has put on the dye. I think he is also using external fan for himself that will also help in cooling.
@archiehunt9440 The issue you're describing is commonly referred to as the 'Blue Light of Death' (BLOD). It can result from various issues, including a faulty APU, power supply, or even corrupted firmware. Another potential cause could be improper RAM biases. Use a multimeter to measure the RAM biases and ensure they match the expected voltage values. If they deviate, the issue might lie with the voltage regulators or associated components. Start by checking the secondary power supplies,, and RAM bias voltages. If those are fine, further steps like reflowing or reballing the APU might be required. Let me know if you’d like more detailed guidance!
Hi i need a help from you. I need a resistor value on sae-004 ps4 slim board. I check on sad-002 it is around 22ohm, but on my sae-004 it is 46ohms. th-cam.com/users/shortsioO8PjarQQI?feature=shared I have asked many places in youtube and forums but no one help yet. Please help.
We miss you master welcome back ❤
Your channel is very interesting, you are tech, clear and calm (like ASMR). I really appreciate the translation on video. Italy is watching you 🙂👋
Awesome, thank you!
Hey, you're back. Good to see new content and thanks for this info 😊
More to come dear bro.😌
@@idreestech Happy to hear that. I look forward to seeing it 😁
السلام عليكم ورحمة الله وبركاته الحمدلله على عودتك
Yes, finally a new video!! TYSM!
More to come!
what temp/air flow do you use around 6:45?
I usually use the heat gun at 380 degrees.
Awesome video many thanks for your time and effort from vini
My pleasure!
Master we miss u and ur video
Boss I m waiting your video...pls uploaded video on regulary
I will try my best
Aoa sir
Can you kindly make a video on how to make curve tracer for an oscilloscope and calibration it would be really helpful
Connect the DUT: Connect the device under test to the curve tracer’s test leads.
Set Oscilloscope: Configure the oscilloscope for XY mode (where X is the voltage and Y is the current).
Power On: Turn on the curve tracer and the oscilloscope.
Adjust Sweep: Adjust the sweep voltage range and current sensitivity on the curve tracer.
Observe Curves: Observe the characteristic curves displayed on the oscilloscope. Analyze the shape and parameters of the curves to evaluate the performance of the DUT.
We miss uu master
nice video brother
welcome back
Anyone else like "wait a minute!" when it started speeding up?? lol
I liked your comment, thanks!
@@idreestech Very helpful as well thank you. 🙂
@@JonnyTGood ❤❤❤
amazing work
Thank you! Cheers!
Tengo un problema parecido, la fuente de alimentación está bien pero aun así solo pita, enciende la luz azul y se apaga(además el ventilador gira). La placa es una SAF 006
Hola @MauricioLopez-mj9oe, gracias por compartir tu situación. Si la fuente de alimentación está funcionando correctamente pero tu consola sigue apagándose después de pitar, podría ser un problema con el APU o algún componente relacionado con el suministro de voltaje. Te recomendaría verificar los reguladores de voltaje y las resistencias cercanas al APU. Si necesitas más ayuda, no dudes en preguntar. ¡Éxito con la reparación!
Very good job 👏 👍 👌
Thank you! Cheers!
Bro tengo joystick de xbox serie s. Y tiene drif le cambié los analógicos y sigue igual tendrás algunos diagramas y de reparación de fuente ps4? Serías amable 😊
Lamentablemente no tengo diagrama de ningún tipo.
I thought ps4 required clamping and fan in order to turn on properly?
For testing only heatsink will be enough that is what he has put on the dye. I think he is also using external fan for himself that will also help in cooling.
Nice Idrees brother
Thanks
Thanx master ❤️🇹🇷
This issue for power supply
Different voltages power sources for different chips 🍟. One of them.
Excellent knowledge share.👍👍👍
Stay connected.
No matter what i do my ps4 turns on flashes with a blue light turns off after a few seconds and nothing happens and i cant fix it
@archiehunt9440 The issue you're describing is commonly referred to as the 'Blue Light of Death' (BLOD). It can result from various issues, including a faulty APU, power supply, or even corrupted firmware. Another potential cause could be improper RAM biases. Use a multimeter to measure the RAM biases and ensure they match the expected voltage values. If they deviate, the issue might lie with the voltage regulators or associated components. Start by checking the secondary power supplies,, and RAM bias voltages. If those are fine, further steps like reflowing or reballing the APU might be required. Let me know if you’d like more detailed guidance!
@idreestech ah ok thx so much
Good work
Thank you so much 😀
❤
Master 👍
Thanks for the visit!
use microscope screen hume b ache se samaj aaye ga
I will try my best to.
Mere pas 3 playstation 3 hai kharab hai mobile nomber aor idrees mujhe bejo
Get the number from the about section of my channel.
Ill try
Aap ka mobile nomber off hai
WhatsAAp only
Cost 💲 repair 👨🔧
Depends.
@@idreestechsame issue
Nee kasu kudu na play pannuren
Bro
Hi i need a help from you. I need a resistor value on sae-004 ps4 slim board. I check on sad-002 it is around 22ohm, but on my sae-004 it is 46ohms.
th-cam.com/users/shortsioO8PjarQQI?feature=shared
I have asked many places in youtube and forums but no one help yet. Please help.
According to my knowledge, it could be a difference in parts values regarding different models.