Hello from Nova Scotia! Thank you for the kind words. I'm glad you enjoyed the detailed voice-overs and component value descriptions. Please let me know if you need more assistance or have any specific requests!
@idrees tech where can i buy the reflowing tool you used on the ps3 in this video? i know it will be expensive but it will make up for the amount of dead ps3s I have laying around
You can purchase reflowing tools from various online retailers and specialized electronic repair equipment suppliers. Here are a few options to consider: Amazon: They have a wide range of reflow stations and related tools. Look for brands like Quick, Weller, and Hakko, which are known for their reliability and quality. Example: Quick 861DW Hot Air Rework Station eBay: You can often find both new and used reflowing tools at competitive prices. Just make sure to check the seller's reputation and reviews before purchasing. AliExpress: A good source for more budget-friendly options, though shipping times can be longer. Brands like BGA and ACHI offer affordable reflow stations. Example: ACHI IR6000 BGA Rework Station Specialized Electronics Suppliers: Sites like Digi-Key, Mouser, and RS Components offer a variety of professional-grade tools for electronics repair. Reflowing stations can indeed be an investment, but they can save a lot of PS3s and other electronics from the landfill. Good luck with your repairs!
Hello Master! I wanted to ask for advice. I am repairing my PS3Superslim with the msx-001 board. The stabilizer burned out and a voltage of 5V appeared on the wifi module. The Marwell chip has received a short circuit. I replaced the stabilizer, restored 1.8V. I replaced the marwell chip, but the console writes 8002F1F9. The resistors or capacitors in the WiFi module are probably damaged. It is possible to install a wifi module from the 3000 series from MPX-001. Have you come across such compatibility?
I tried to jumper a resistor like you did on your PS2 video because I had a glitchy screen and managed to find the place where the issue is. Unfortunately i seem to have burned that part of the board a little and failed to solder with precision. It's a bit of a mess now in that area, is there a way to fix that or is the motherboard just dead now?
I'm sorry to hear about the trouble with your board. If the area is a bit of a mess, you might still be able to fix it with some careful work. Try these steps: Clean the Area: Use isopropyl alcohol to clean the area around the damaged part to get rid of any solder flux or debris. Just clean off the excessive solder using a solder wick. Inspect the Damage: Look closely for any burnt or damaged traces. Sometimes you can repair small traces with a bit of wire or conductive paint. Resolder Carefully: If possible, use a fine-tip soldering iron and some flux to carefully resolder the connections. Make sure you don't short any adjacent pins or components. Check for Continuity: Use a multimeter to check for continuity in the affected area to ensure there are no broken connections. Consider Professional Repair: If the damage is extensive, it might be worth consulting a professional repair service. They have specialized tools and techniques for fixing damaged PCBs. It's worth giving it a try if you're comfortable with the repair process, but if it’s too complex or the damage is too severe, it might be best to replace the motherboard or seek professional help. Good luck!
@@idreestech Thanks for getting back to me, yes I underestimated the precision that would be required. I only have one soldering iron and it's got quite a thick chiseled tip. I will do what you say and see what can be done.
Thank you Engineer, this partly answers my quest of where i requested a video describing different parts on the motherboard, their functions, the common issues they face and how to fix them. I atlest have a glimpse. Thank you
Hi may friend first off excellent video as,always I was wondering if you could answer a question for me the offline jb for the ps3 could this be done on the esp 32 chips or the picofox that does the ps4 auto jb once again many thanks for your time
Good video, theres some lessons to learn here, but I couldn't help but notice the ps3 you're testing has the black CPU, the one you're reflowing has the common brownish CPU🤷🏾♂️
Hi my friend sorry to keep asking questions could you tell me what your scooe is ive been looking at them on Ebay i do custom ps3s and sell them on there wished you lived in manchester my good man many thanks for your time from vini
No problem at all, Vini! I'm here to help. When it comes to oscilloscopes, you want one that's reliable for the kind of work you're doing with PS3s. A good entry-level scope that many find useful for console repair is the Rigol DS1054Z. It's a 4-channel, 50 MHz scope that's widely praised for its performance and price. If you're looking for something a bit more advanced with higher bandwidth, the Siglent SDS1104X-E is another excellent choice. It's also a 4-channel scope but with 100 MHz bandwidth, which might come in handy if you need more detailed analysis. Both models are popular among electronics hobbyists and professionals alike, and they should be available on eBay. The key is to make sure the scope has enough bandwidth and sample rate for the kind of signals you're dealing with, as well as enough channels for more complex diagnostics. It’s great to hear about your custom PS3 work! If you ever need more advice or want to chat about your projects, feel free to reach out. If I were in Manchester, I'd definitely stop by to check out your work!
Hello! I'm trying to fix a PS3 Slim 2504A which is stuck in an update loop. At around 50% of progress it gives the error "8002F14E", which is often associated with a broken Blu Ray Daughter board. But the 2504's disc drive doesn't include a daugtherboard, so what could the issue be?
@@idreestechThanks for the answer. I received the console without an hard drive, so I put a new one in. It booted straight into safe mode, and now when I turn it on it goes straight to updating, I can't access the XMB therefore I can't patch the flash memory and install no-bd. Are there any other solutions?
Check for Hardware Issues: Even though the PS3 Slim 2504A doesn't have a separate Blu-ray Daughter board, check the connections and ensure that the Blu-ray drive and related cables are properly connected and in good condition. And the components related to the DVD drive cables as well. If these steps don't help, you might need to consult a professional repair service or check for more detailed diagnostics. Good luck!
@@idreestech Thanks again for the answer! I'm lucky to have 2x 2504 PS3s, I've already tried swapping the Drive for another one but noticed no differences, so I think I'll compare the resistances near the Blu-Ray chip and swap them if needed. If this method doesn't work, I'll probably buy a Nor Flasher.
Is the reflow process sufficient for the PlayStation 3 if the device works after reflowing, or is reballing necessary? I want you to answer this question based on your extensive experience in this field.
In my experience, the reflow process can be a temporary fix for a PlayStation 3 with issues like cracked solder balls or poor connections. Reflowing involves heating the entire board or specific areas to re-melt the solder and re-establish connections. This can sometimes bring a non-functioning console back to life, but it's not always a permanent solution. Reflowing may resolve the issue for a short period, but the underlying problem might resurface due to the nature of the original lead-free solder, which can develop micro-fractures over time, especially in devices that generate a lot of heat like the PS3. Reballing, on the other hand, involves removing the chip entirely, cleaning off all the old solder, and applying new solder balls before reattaching the chip to the motherboard. This method addresses the issue more thoroughly and can provide a more lasting repair because it replaces the potentially defective solder with fresh solder, reducing the chance of future failures. Therefore, while a reflow can be a quick and easy fix to get your PS3 running again, reballing is generally recommended for a more permanent solution. If you find that reflowing works initially but the problem returns, reballing would be the next step to consider.
When I perform a downgrade on the PlayStation 4, even though the Syscon chip accepts the downgrade, the PS4 WEE Tools program gives me a "Not Patchable" message. Why does this message appear?
Thank you for sharing. Please when you have time do an in depth tutorial on oscilloscope from basics and do more details like what you are measuring and what is the benefit in console repair and what we can do with digital oscilloscope although you may not have one.
Much prefer your voice over. :) It's awesome how you describe everything and component values. Thank You and hello from Canada, Nova Scotia.
Hello from Nova Scotia! Thank you for the kind words. I'm glad you enjoyed the detailed voice-overs and component value descriptions. Please let me know if you need more assistance or have any specific requests!
Amazing video and amazing work , thank you !) Keep going)
You're welcome! I'm glad to hear that the information was helpful.
Yellow light DOESNT MEAN THAT NEC TOKIN IS FAULTY. It can be a NEC Tokin fault but anyone should see the error log with the SYSCON.
I don't use UART for error logs as it seems useless.
@@idreestech In your case, there would be no errors but if there was YLOD you had to use UART syscon check.
I usually diagnose YLOD with the help of an oscilloscope, checking for distorted signals in the CPU or the GPU power rail.
@@idreestech That is a very good idea. I give you props
@idrees tech where can i buy the reflowing tool you used on the ps3 in this video? i know it will be expensive but it will make up for the amount of dead ps3s I have laying around
You can purchase reflowing tools from various online retailers and specialized electronic repair equipment suppliers. Here are a few options to consider:
Amazon: They have a wide range of reflow stations and related tools. Look for brands like Quick, Weller, and Hakko, which are known for their reliability and quality.
Example: Quick 861DW Hot Air Rework Station
eBay: You can often find both new and used reflowing tools at competitive prices. Just make sure to check the seller's reputation and reviews before purchasing.
AliExpress: A good source for more budget-friendly options, though shipping times can be longer. Brands like BGA and ACHI offer affordable reflow stations.
Example: ACHI IR6000 BGA Rework Station
Specialized Electronics Suppliers: Sites like Digi-Key, Mouser, and RS Components offer a variety of professional-grade tools for electronics repair.
Reflowing stations can indeed be an investment, but they can save a lot of PS3s and other electronics from the landfill. Good luck with your repairs!
@@idreestech thanks for responding. Appreciate it a lot 🙏
You r WC!
Hello, where from do you know all the values of resistor and caps ?
From my practice.
Hello Master! I wanted to ask for advice. I am repairing my PS3Superslim with the msx-001 board. The stabilizer burned out and a voltage of 5V appeared on the wifi module. The Marwell chip has received a short circuit. I replaced the stabilizer, restored 1.8V. I replaced the marwell chip, but the console writes 8002F1F9. The resistors or capacitors in the WiFi module are probably damaged. It is possible to install a wifi module from the 3000 series from MPX-001. Have you come across such compatibility?
Yes, you can swap it with any number of other board. The version written on the module should be same or above.
@@idreestech Thank you!
I tried to jumper a resistor like you did on your PS2 video because I had a glitchy screen and managed to find the place where the issue is. Unfortunately i seem to have burned that part of the board a little and failed to solder with precision. It's a bit of a mess now in that area, is there a way to fix that or is the motherboard just dead now?
I'm sorry to hear about the trouble with your board. If the area is a bit of a mess, you might still be able to fix it with some careful work. Try these steps:
Clean the Area: Use isopropyl alcohol to clean the area around the damaged part to get rid of any solder flux or debris.
Just clean off the excessive solder using a solder wick.
Inspect the Damage: Look closely for any burnt or damaged traces. Sometimes you can repair small traces with a bit of wire or conductive paint.
Resolder Carefully: If possible, use a fine-tip soldering iron and some flux to carefully resolder the connections. Make sure you don't short any adjacent pins or components.
Check for Continuity: Use a multimeter to check for continuity in the affected area to ensure there are no broken connections.
Consider Professional Repair: If the damage is extensive, it might be worth consulting a professional repair service. They have specialized tools and techniques for fixing damaged PCBs.
It's worth giving it a try if you're comfortable with the repair process, but if it’s too complex or the damage is too severe, it might be best to replace the motherboard or seek professional help. Good luck!
@@idreestech Thanks for getting back to me, yes I underestimated the precision that would be required. I only have one soldering iron and it's got quite a thick chiseled tip. I will do what you say and see what can be done.
Hi what I need to for replacing the 33ohm resistors? Is the actual value of the resistor 33ohms?
Yes you need a resistance of 33 ohms for coupling and its actual value is also 33 ohms, you can also try a jumper on it.
@@idreestech by jumper you mean a direct connection in some cases, right?? 🤪
Thank you Engineer, this partly answers my quest of where i requested a video describing different parts on the motherboard, their functions, the common issues they face and how to fix them.
I atlest have a glimpse. Thank you
You're welcome! I'm glad to hear that the information was helpful.
Hi may friend first off excellent video as,always I was wondering if you could answer a question for me the offline jb for the ps3 could this be done on the esp 32 chips or the picofox that does the ps4 auto jb once again many thanks for your time
Not that I know of
Good video, theres some lessons to learn here, but I couldn't help but notice the ps3 you're testing has the black CPU, the one you're reflowing has the common brownish CPU🤷🏾♂️
Good point, It is to show the reflow process as I could not record a video of the same motherboard.
Good work sir
So nice of you
Congrats my friend, 🙏
Thanks for the visit😄
Any tips for ps3 8002f147 while updating ?
very nice video we are learning this videos ❤
Glad to hear that.
Hi my friend sorry to keep asking questions could you tell me what your scooe is ive been looking at them on Ebay i do custom ps3s and sell them on there wished you lived in manchester my good man many thanks for your time from vini
No problem at all, Vini! I'm here to help. When it comes to oscilloscopes, you want one that's reliable for the kind of work you're doing with PS3s. A good entry-level scope that many find useful for console repair is the Rigol DS1054Z. It's a 4-channel, 50 MHz scope that's widely praised for its performance and price.
If you're looking for something a bit more advanced with higher bandwidth, the Siglent SDS1104X-E is another excellent choice. It's also a 4-channel scope but with 100 MHz bandwidth, which might come in handy if you need more detailed analysis.
Both models are popular among electronics hobbyists and professionals alike, and they should be available on eBay. The key is to make sure the scope has enough bandwidth and sample rate for the kind of signals you're dealing with, as well as enough channels for more complex diagnostics.
It’s great to hear about your custom PS3 work! If you ever need more advice or want to chat about your projects, feel free to reach out. If I were in Manchester, I'd definitely stop by to check out your work!
Hello! I'm trying to fix a PS3 Slim 2504A which is stuck in an update loop. At around 50% of progress it gives the error "8002F14E", which is often associated with a broken Blu Ray Daughter board. But the 2504's disc drive doesn't include a daugtherboard, so what could the issue be?
Try an update via recovery mode with No BD.PUP
@@idreestechThanks for the answer. I received the console without an hard drive, so I put a new one in. It booted straight into safe mode, and now when I turn it on it goes straight to updating, I can't access the XMB therefore I can't patch the flash memory and install no-bd. Are there any other solutions?
Check for Hardware Issues: Even though the PS3 Slim 2504A doesn't have a separate Blu-ray Daughter board, check the connections and ensure that the Blu-ray drive and related cables are properly connected and in good condition. And the components related to the DVD drive cables as well.
If these steps don't help, you might need to consult a professional repair service or check for more detailed diagnostics. Good luck!
@@idreestech Thanks again for the answer! I'm lucky to have 2x 2504 PS3s, I've already tried swapping the Drive for another one but noticed no differences, so I think I'll compare the resistances near the Blu-Ray chip and swap them if needed. If this method doesn't work, I'll probably buy a Nor Flasher.
Looks like another good video
Thanks 👍
Welcome back
Thanks 👍🏼
❤ Thanks master .. And Selamün aleyküm.
WaAlaikumAslaam
Thanx master ❤️🇹🇷
Thanks!👍🏼
Is the reflow process sufficient for the PlayStation 3 if the device works after reflowing, or is reballing necessary? I want you to answer this question based on your extensive experience in this field.
In my experience, the reflow process can be a temporary fix for a PlayStation 3 with issues like cracked solder balls or poor connections. Reflowing involves heating the entire board or specific areas to re-melt the solder and re-establish connections. This can sometimes bring a non-functioning console back to life, but it's not always a permanent solution.
Reflowing may resolve the issue for a short period, but the underlying problem might resurface due to the nature of the original lead-free solder, which can develop micro-fractures over time, especially in devices that generate a lot of heat like the PS3.
Reballing, on the other hand, involves removing the chip entirely, cleaning off all the old solder, and applying new solder balls before reattaching the chip to the motherboard. This method addresses the issue more thoroughly and can provide a more lasting repair because it replaces the potentially defective solder with fresh solder, reducing the chance of future failures.
Therefore, while a reflow can be a quick and easy fix to get your PS3 running again, reballing is generally recommended for a more permanent solution. If you find that reflowing works initially but the problem returns, reballing would be the next step to consider.
@@idreestech Thank you very much. You saved me a lot with this answer because you are a reliable source
@@abdomoz7809 You're very welcome! I'm glad I could help.
When I perform a downgrade on the PlayStation 4, even though the Syscon chip accepts the downgrade, the PS4 WEE Tools program gives me a "Not Patchable" message. Why does this message appear?
Dear, you are truly fortunate!
@@idreestech what do you mean?
Great
You're welcome! I'm glad to hear that the information was helpful.
very Interresting video, until you mentioned reflowing the cpu.
Good point!
Thank you for sharing. Please when you have time do an in depth tutorial on oscilloscope from basics and do more details like what you are measuring and what is the benefit in console repair and what we can do with digital oscilloscope although you may not have one.
Sure I will.
nice
Thanks!
It will last 6 months at most. You gotta make a reballing. 😊
😱Read the reply below.
@@idreestech So? It doesn't change it will last "at most" 6 months.
@@Thehustler01828 Good point!
Check if a reply to @qwealhur1109 will make sense.
@@idreestech I have no time, I'm cooking.
😊
Thanks!👍🏼
sir xbox 360 error E74
If I get a chance,I will.
goood
Thank you very much.