When I first got into building, you have no idea how many times I referenced your videos for specific cooler mounting. It made something that seemed so daunting, pretty easy to follow. You’re truly helping more than you know with these how to vids. Good stuff as always!
Yeah, this cooler has so many cables, you are the only person who showed how to install it in an easy-to-understand way. Installing the radiator, fans, and block is easy but all those cables were daunting to say the least. Thank you sir, you helped me when everyone else just wanted to show their beautifully built system.
to be fair, i think all things which come with rgb are kinda daunting. 3 years ago i builded my first pc with an aio cooler, for some reason my mb only has had one rgb header and it had to much volt, so my rgb on the aio just died on first start up. since that i wont touch them without an tutorial anymore. i can build a pc from scratch without any issues but when it comes to rgb im out.
For some reason I search for an installation video and TH-cam is pumping out smaller content creators. I do like that but in this particular instance I'm grateful for your insight and appreciate your work
Man. I just got myself a H170i Elite. Assuming it installs the same way. This is so much better then the official CORSAIR LABS tutorial for their 2 fan version of the H150i Elite. Your tutorial goes super in depth and I will definitely be leaving a sub!!
This helped me a lot. I watched it so many times lol. I had a weird issue with the Sata power from my power supply. It took me so long to figure it out but this guide along with common sense is all anyone should need. Thanks a ton my system looks lit!
The amount of poorly detailed videos that I have watched only to come across your video and for you to have it explained step by step in detail on how hook everything up from start to finish. Words cannot express my gratitude. Thank you.
This gained you another subscriber. I’m new to PC building and such and this helped me change the AIO to the new corsair in my prebuilt. The only thing i can say is that these angles made it exceptionally simple and straight forward to install and correctly wire up. Thank you so much.
My favorite aspect of this video is the deliberate demonstration of wiring. The only thing missing for me was the sata connection. To point out where from psu it comes from.
my first build was on 2018 and your videos what i was counted on back then to build my pc and now i am upgrading and i come to your channel to watch your videos again your videos is really helpful big appreciation and love
Been thinking about getting the iCUE H100i XT Elite. Your video has been the most detailed and informative. Thank you so much! You just earned a subscriber!
Dude….this video saved my sanity…I can’t thank you enough, this is a must see video for anyone thinking of installing this kit as the instructions are non existent! Thank you again 😀😀😀😀👍👍👍👍
Your fantastic video helped me to setup my Corsair H150i RGB Elite at home. My device doesn't have a control box (because RGB controlling is already integrated) but I could get it up & running in a similar manner: Connecting it to CPUFAN & USB 2.0 Jumper on my motherboard, connecting the 3 Corsair fans and adding a SATA power connection from my power supply. I would also recommend to remove the plastic from the screen (11:30) a little later because it is very prone to scratches. In general, thank you for this great tutorial! It would have taken me a lot more time without it. 👍 Best from Berlin, Benny
I Was so nervous working with this AIO because of all the wires and its been a while (10 years) since I build my last computer (laptops since then) with lg67 itx motherboard with the CPU's included cooling fan. And then I discovered that some people are using a retro kit for lga1700, but his video helped to show that all the hardware is included in this case.
THANK YOUUU. I'm building my first computer in like 10 years and I can't find the H150i LCD in my country, and I was looking everywhere to see if the H150i LCD has the screen fixed vs the upgrade kit for the basic Capellix edition which is magnetic. I had looked at 20 videos. But when you said "We recomment taking off the screen" I yelled FINALLY very loudly haha. Now I can get the white H150i Capellix and wait for the white screen upgrade kit. THANK YOU again
What an amazing video I usually don’t comment on TH-cam videos but I really wanted to express my gratitude. I didn’t even get through the entire video I just know this will answer all my question
awesome video, You do the best overviews of motherboards, coolers and everything else. To many channels assume that everyone knows everything. The multiple views and explanation is great. thank you.
If someone reads this, godbless! each start of my pc i have to remove commander core from bluetooth and other devices, rescan device manager, restart iCue - then it sees all my fans and my h170i. any work around? im kinda tired...
Thank you for the very thorough and clear tutorial ! Now thanks to you I will be much more confident installing this dang cool LCD AIO cooler for my 1st build :)
Thank you very much for this guide. Every other guide that I could find was strictly amd. Showing that I could reposition the back bracket's screw holes was extremely helpful. Been awhile since I was deep in the guts of a pc.
Would you happen to know how the wiring goes if I have unifans and not using corsair fans? My main confusion is do I still need to use the commander pro controller (I know its technically not that but same idea right). Can I just plug USB2.0 and the pump header connection? that way I can control the LCD screen via iCUE and the pump speed I can set to full speed?
just getting into RGB computer parts and with the control box, can you plug other fans into it too instead of them being plugged in elsewhere so they are all controlled by the same thing?
It should be noted that the CPU fan header does not work for this AIO on most motherboards. You will need to plug it into the SYS FAN PUMP header and will likely need an extension cable due to the cooler’s super short included cable.
I have a b550 tomahawk max wifi I removed the screw that held the initial brackets that served for an oem fan. The standoffs literally don’t go in they just screw endlessly am I doing something wrong or?
Tip: Connect the pump USB cable DIRECTLY to the Motherboard. I bought this AIO last week and I connected both the pump and controller USB cables with the Y cable. After some minutes the LCD screen froze and the hardware disappeared from iCUE. After looking for info in Reddit, I found this solution, to connect the controller to the Y cable and the pump directly to the motherboard and voilá, the screen works perfectly now.
@@MiguelGaming117 I just followed this comment from Reddit: I had the very same problem with my setup. After setting everything up I would open iCue and the LCD would show up on the iCue software and I can adjust all the settings and use it but it would freeze and then crash and would disappear from the iCue software and the only way to fix it would be to restart the computer completely. Just for it to crash again after a minuet of opening iCue. What helped me over come this was not using the splitter for the USB header cause from what I gathered if you use the splitter and it has to share power from another source using the same header it will cause the LCD screen to crash. So I plugged the LCD screen directly to the USB header on the motherboard so it had it's own header and the problem went away and never crashed. I ended up using the splitter for the Commander Core and another unit that also used the header. Don't use any splitter with the LCD plug, plug it in directly to it's own header on the motherboard. Hopefully that will work like it did for me. www.reddit.com/r/Corsair/comments/r85kvo/elite_lcd_upgrade_kit_keeps_freezing_itll_be_fine/
Hi , it was running first but after the first restart the lcd show a red warning , but it seem all i functional but no the lcd , do you Know pls what the problem ?
Glad I watched this video, was about to go pick this up. I'm so used to coolers coming with the brackets they need. Currently have a Hyper 212 which has its own bracket. The stock bracket i lost in a fire... need to order that bracket now.
there's a known issue with many users where the cooler LCD display shows a red triangle error. the issue has to do with the use of the usb splitter possibly drawing too much power from a single usb header. most users have opt to bypass the splitter & plug each usb separately onto the mobo. how did you managed to get your AIO to work correctly using the splitter.
Will be doing major surgery on the desktop tomorrow, replacing my NH-D15 with this cooler (largely because the NH-D15 is just in my way - it's way too big compared to a pump / top), replacing the 5700 XT with a 3080, and replacing a few Noctua chromax fans with the same fans that come with this cooler. I've avoided Corsair for ages as I don't like proprietary solutions, but the EK Nucleus I pre-ordered in September still hasn't shipped and I'm tired of waiting. With the screen, everyone says iCUE is by far the best software among all the "mainstream" ones (I've heard it's got nothing on AquaComputer's Aquasuite, but I can't be arsed to build a custom loop either), so I figured I'd give it a shot. Wish me luck.
My LCD screen isn't detected by iCUE. Tried ditching the USB splitter to no avail. My pc detects it in devices, but not in iCUE. Also downloading iCue causes the pump to stop running. Uninstalled iCue, the pump functions normally, lcd changes from red triangle to "coolant temp 0*C"
Update: bought a second one and it works flawlessly! I waited too long to try and return the first one, so I just replaced my 3 Cyberpower case fans with the 3 Corsair fans from the radiator. Everything works now and I have 6 matching fans! 🙌
FINALLY, watching your video i finally figured out i missed connecting both usb cords to the splitter. its been like a year and i couldnt figure out why the screen never appeared in icue settings even though the pump itself did. Q_Q
I am using same AIO for 7800x3d. is it normal the coolant is only 33degree while idle CPU is 63? it is ~30 degree difference. After R23 pressure test, coolant temp stable at 35 degree while CPU stable at 83 degree. four screws was screwed up until i feel resistant, but gently by a driver.
Dude i got these brackets with mine and was like wtf why does every video online show it with two hook point type mounts lol thanks for this upload trying it on a AM5 build tonight
I just installed the H150i Elite and I'm doing a push/pull setup on it. When I powered on the computer the RGB lights did not come on but the fans worked. I had no problem with setting up my commander core xt to run my other 4 x 140AF RGB lights. I do not have my OS installed on the computer yet.
For some reason my corsair products are not updating. Ive trued a few times now but every time i start up my pc it says my mouse, headphones, hub, keyboard need to be updated. I try to it says its up to date...then next start up says it needs to update.
Words can't express how much more helpful I found this video than 99% of the ones out there which show it sped-up 500x and are 3 minutes long.
Glad it could help you :)
When I first got into building, you have no idea how many times I referenced your videos for specific cooler mounting. It made something that seemed so daunting, pretty easy to follow. You’re truly helping more than you know with these how to vids. Good stuff as always!
Yeah, this cooler has so many cables, you are the only person who showed how to install it in an easy-to-understand way. Installing the radiator, fans, and block is easy but all those cables were daunting to say the least. Thank you sir, you helped me when everyone else just wanted to show their beautifully built system.
to be fair, i think all things which come with rgb are kinda daunting.
3 years ago i builded my first pc with an aio cooler, for some reason my mb only has had one rgb header and it had to much volt, so my rgb on the aio just died on first start up.
since that i wont touch them without an tutorial anymore.
i can build a pc from scratch without any issues but when it comes to rgb im out.
Easily one of the best guides I've watched for AIO coolers. Extremely thorough step-by-step explanations, thank you.
For some reason I search for an installation video and TH-cam is pumping out smaller content creators. I do like that but in this particular instance I'm grateful for your insight and appreciate your work
One of the best, clearest and concise explanations I have seen. This really helped me through the installation process. Many thanks.
Man. I just got myself a H170i Elite. Assuming it installs the same way. This is so much better then the official CORSAIR LABS tutorial for their 2 fan version of the H150i Elite. Your tutorial goes super in depth and I will definitely be leaving a sub!!
One again, one hell of an excellent guide. Very informative and easy to follow
Thank you - I’ve accustomed to your voice from all my builts
This helped me a lot. I watched it so many times lol. I had a weird issue with the Sata power from my power supply. It took me so long to figure it out but this guide along with common sense is all anyone should need. Thanks a ton my system looks lit!
The amount of poorly detailed videos that I have watched only to come across your video and for you to have it explained step by step in detail on how hook everything up from start to finish. Words cannot express my gratitude. Thank you.
This gained you another subscriber. I’m new to PC building and such and this helped me change the AIO to the new corsair in my prebuilt. The only thing i can say is that these angles made it exceptionally simple and straight forward to install and correctly wire up. Thank you so much.
I've watched a few videos on how to instal this stuff (I got the bigger one H170i ) and I have to say this is by far the more easy one to follow.
My favorite aspect of this video is the deliberate demonstration of wiring. The only thing missing for me was the sata connection. To point out where from psu it comes from.
my first build was on 2018 and your videos what i was counted on back then to build my pc and now i am upgrading and i come to your channel to watch your videos again your videos is really helpful big appreciation and love
Building my first PC in over 20 years and using this AIO cooler. Super super helpful video, cheers!!!
I have never done something like this and even i could follow it. The best guide on yt by far
Been thinking about getting the iCUE H100i XT Elite. Your video has been the most detailed and informative. Thank you so much! You just earned a subscriber!
Perfect - the sliding bracket things are what i needed to know. Thanks for the post.
God I love you, I nearly shit myself thinking my cooler wasn’t going to fit
Dude….this video saved my sanity…I can’t thank you enough, this is a must see video for anyone thinking of installing this kit as the instructions are non existent! Thank you again 😀😀😀😀👍👍👍👍
Your fantastic video helped me to setup my Corsair H150i RGB Elite at home. My device doesn't have a control box (because RGB controlling is already integrated) but I could get it up & running in a similar manner: Connecting it to CPUFAN & USB 2.0 Jumper on my motherboard, connecting the 3 Corsair fans and adding a SATA power connection from my power supply. I would also recommend to remove the plastic from the screen (11:30) a little later because it is very prone to scratches. In general, thank you for this great tutorial! It would have taken me a lot more time without it. 👍 Best from Berlin, Benny
where did you connect the sata power connector on the motherboard?
This is Michael. Excellent video. You set it up well and very clearly defined everything people need to know. Probably the best on the net.
Thank you! Made this experience WAY EASIER than it otherwise would have been! 10/10🎉
Super helpful! About to setup a new H150 right now and used this, thanks!
I Was so nervous working with this AIO because of all the wires and its been a while (10 years) since I build my last computer (laptops since then) with lg67 itx motherboard with the CPU's included cooling fan. And then I discovered that some people are using a retro kit for lga1700, but his video helped to show that all the hardware is included in this case.
THANK YOUUU. I'm building my first computer in like 10 years and I can't find the H150i LCD in my country, and I was looking everywhere to see if the H150i LCD has the screen fixed vs the upgrade kit for the basic Capellix edition which is magnetic. I had looked at 20 videos. But when you said "We recomment taking off the screen" I yelled FINALLY very loudly haha.
Now I can get the white H150i Capellix and wait for the white screen upgrade kit. THANK YOU again
What an amazing video I usually don’t comment on TH-cam videos but I really wanted to express my gratitude. I didn’t even get through the entire video I just know this will answer all my question
Very Helpful! Really appricated. Easy to follow guide :) ❤
Very well detailed video! Thank you! No other video goes into detail step by step for someone who has no clue what theyre doing
Thanks for this video. The one put out by Corsair was basically how to do a speedrun install, and left the AMD instructions to the imagination.
Nice installation guide❤
awesome video, You do the best overviews of motherboards, coolers and everything else. To many channels assume that everyone knows everything. The multiple views and explanation is great. thank you.
Thank you for showing me how to install the fans. For some reason every channel including corsair would skip that part lol.
Hell of a detailed guide, thank you very much!
Bro you deserve more than million subscribers! Seriously love your channel!
love you dude. i was looking for this video for hour😢
Good job mate! Very thorough as these types of videos should be !
amazing guide and basically convinced me to prolly get this for my next build! thanks nick!
Great video brother! A lot of important details, that's what I like because it's always with small details we have problems and lose a loooot of time!
If someone reads this, godbless! each start of my pc i have to remove commander core from bluetooth and other devices, rescan device manager, restart iCue - then it sees all my fans and my h170i. any work around? im kinda tired...
Wow, amazing guide man. Hats off!
Glad it helped!
Mine comes in the mail on Tuesday, glad you uploaded this!
I really dig videos like this. Hardware spotlights/overviews are good, but tyese guides save people from so many headaches. :D
Thank you for the very thorough and clear tutorial ! Now thanks to you I will be much more confident installing this dang cool LCD AIO cooler for my 1st build :)
this video help me out so much i installed my first aio yesturday
Finally, excellent guide that i needed. Thx NIck
Best informative builder on youtube/in the world! THANK YOU KING!
Got this cooler delivered last night. Great guide, thanks a lot!
how do you like it?
Thank you very much for this guide. Every other guide that I could find was strictly amd.
Showing that I could reposition the back bracket's screw holes was extremely helpful. Been awhile since I was deep in the guts of a pc.
Another great review! Keep up the great content. From USA
This helped SO much man. Thank you
Thanks for the video man, it really helped me out for my future install.
Sehr sehr gutes Video hat mir beim Aufbau sehr geholfen
Just perfect. Thanks
Easy to understand and follow, great vid, ty o/
Very much appreciated the details in this video was stuck and this helped me finish the install, thank you!
Thanks for this vídeo mate!!!
Thanks for this video. I couldn't do it without you.
I really enjoy these "how to" guides.
Thanks for the tutorial! Very helpful especially as I am building a new PC today with a H150i Elite cooler! :)
Glad this could help :)
@@GearSeekers Was there a plastic peel on the thermal paste? Thanks!
Would you happen to know how the wiring goes if I have unifans and not using corsair fans? My main confusion is do I still need to use the commander pro controller (I know its technically not that but same idea right). Can I just plug USB2.0 and the pump header connection? that way I can control the LCD screen via iCUE and the pump speed I can set to full speed?
it looks so awsome love the video keep up the good work
I’m from Brazil and I loved your videos, you’re so careful with the explications and I understand the entire video, thanks for doing this for gamers
Top tier install guide, thank you.
Thanks for video, bro!!! Clear and perfect!!!
just getting into RGB computer parts and with the control box, can you plug other fans into it too instead of them being plugged in elsewhere so they are all controlled by the same thing?
awesome review! what RAM are you using the RGB looks sick!
you explanations were so perfect and concise. I really appreciate the help.
Thank you for this tutorial ❤
Thanks Man, helps alot ;)
That was very helpful, thank you.
Brilliantly done guide
It should be noted that the CPU fan header does not work for this AIO on most motherboards. You will need to plug it into the SYS FAN PUMP header and will likely need an extension cable due to the cooler’s super short included cable.
Excellent guide. Sadly, I had a defective pump from the start. It may have damaged some of my components. Further testing is required.😢
I got the LCD upgrade when it came out and it doesnt work. I keep getting the red exclamation point of death.
Wonderful and informative video. Thank you so much.
No, Thank you for watching :)
I have a b550 tomahawk max wifi I removed the screw that held the initial brackets that served for an oem fan. The standoffs literally don’t go in they just screw endlessly am I doing something wrong or?
Do more videos like this was perfect for my install of the h170i unit. Thanks !!
I subscribed because it of this video !
Thxs alot. You made this real easy.
Tip: Connect the pump USB cable DIRECTLY to the Motherboard. I bought this AIO last week and I connected both the pump and controller USB cables with the Y cable. After some minutes the LCD screen froze and the hardware disappeared from iCUE. After looking for info in Reddit, I found this solution, to connect the controller to the Y cable and the pump directly to the motherboard and voilá, the screen works perfectly now.
Can u make a guide to it?
I already did but nothing happens
@@MiguelGaming117 I just followed this comment from Reddit:
I had the very same problem with my setup. After setting everything up I would open iCue and the LCD would show up on the iCue software and I can adjust all the settings and use it but it would freeze and then crash and would disappear from the iCue software and the only way to fix it would be to restart the computer completely. Just for it to crash again after a minuet of opening iCue. What helped me over come this was not using the splitter for the USB header cause from what I gathered if you use the splitter and it has to share power from another source using the same header it will cause the LCD screen to crash. So I plugged the LCD screen directly to the USB header on the motherboard so it had it's own header and the problem went away and never crashed. I ended up using the splitter for the Commander Core and another unit that also used the header. Don't use any splitter with the LCD plug, plug it in directly to it's own header on the motherboard. Hopefully that will work like it did for me.
www.reddit.com/r/Corsair/comments/r85kvo/elite_lcd_upgrade_kit_keeps_freezing_itll_be_fine/
Can this all work with the commander pro? Or do I need the hub shown in the video?
Hi , it was running first but after the first restart the lcd show a red warning , but it seem all i functional but no the lcd , do you Know pls what the problem ?
Glad I watched this video, was about to go pick this up. I'm so used to coolers coming with the brackets they need. Currently have a Hyper 212 which has its own bracket. The stock bracket i lost in a fire... need to order that bracket now.
Best guide 100%
there's a known issue with many users where the cooler LCD display shows a red triangle error. the issue has to do with the use of the usb splitter possibly drawing too much power from a single usb header. most users have opt to bypass the splitter & plug each usb separately onto the mobo. how did you managed to get your AIO to work correctly using the splitter.
I'm trying to figure out this error rn. Even with both plugged in separately it remains :/
Thanks for this video!
Will be doing major surgery on the desktop tomorrow, replacing my NH-D15 with this cooler (largely because the NH-D15 is just in my way - it's way too big compared to a pump / top), replacing the 5700 XT with a 3080, and replacing a few Noctua chromax fans with the same fans that come with this cooler. I've avoided Corsair for ages as I don't like proprietary solutions, but the EK Nucleus I pre-ordered in September still hasn't shipped and I'm tired of waiting. With the screen, everyone says iCUE is by far the best software among all the "mainstream" ones (I've heard it's got nothing on AquaComputer's Aquasuite, but I can't be arsed to build a custom loop either), so I figured I'd give it a shot.
Wish me luck.
Amazing video thank you
My LCD screen isn't detected by iCUE. Tried ditching the USB splitter to no avail. My pc detects it in devices, but not in iCUE. Also downloading iCue causes the pump to stop running. Uninstalled iCue, the pump functions normally, lcd changes from red triangle to "coolant temp 0*C"
any fix so far?
@JMS823 only fix is probably a return. I have the same thing going on corsair is dogsht
Update: bought a second one and it works flawlessly! I waited too long to try and return the first one, so I just replaced my 3 Cyberpower case fans with the 3 Corsair fans from the radiator. Everything works now and I have 6 matching fans! 🙌
FINALLY, watching your video i finally figured out i missed connecting both usb cords to the splitter. its been like a year and i couldnt figure out why the screen never appeared in icue settings even though the pump itself did. Q_Q
U are Awesome Bro!
I am using same AIO for 7800x3d. is it normal the coolant is only 33degree while idle CPU is 63? it is ~30 degree difference. After R23 pressure test, coolant temp stable at 35 degree while CPU stable at 83 degree. four screws was screwed up until i feel resistant, but gently by a driver.
@@gengpan yes that was my same concern. now it idles around 60-63 but it doesn’t pass 74 when gaming. Have you found a solution?
@@carlosm621 i did a search. looks like this is what coolant temperature should be……
i did it!!!! thanks a lott!!!!!! very clear explanation!!!!!!!!!!!!!! ♥
Dude i got these brackets with mine and was like wtf why does every video online show it with two hook point type mounts lol thanks for this upload trying it on a AM5 build tonight
Did it worked on the am5?
@@RicardoSantos-xy1or yeah it worked fine on a ROG CROSSHAIR X670E HERO i dont think they changed much on the new boards as far as the mounts go.
You need to show how the top location would be setup. Also, which way is the proper orientation for the cooler on the CPU?
So I just installed the H 150i; and I don't have the Screen Setup or Hardware Screen on ICue... What solution can I try or do?
I just installed the H150i Elite and I'm doing a push/pull setup on it. When I powered on the computer the RGB lights did not come on but the fans worked. I had no problem with setting up my commander core xt to run my other 4 x 140AF RGB lights. I do not have my OS installed on the computer yet.
Great informative video 👍
For some reason my corsair products are not updating. Ive trued a few times now but every time i start up my pc it says my mouse, headphones, hub, keyboard need to be updated. I try to it says its up to date...then next start up says it needs to update.