Solving the Mystery: Slipper Clutch vs. Transmission: Traxxas Revo 3.3 Nitro Monster Truck: NWI RC

Join me in this latest video update where I address the transmission problem on my cousin's Traxxas Revo 3.3 Nitro Monster Truck. After sitting for 10 years, the truck was only running intermittently. Follow along as I investigate whether it's a slipper clutch issue or a transmission problem causing the truck to not shift properly into second gear. Like and subscribe for more RC troubleshooting and repairs!
#traxxas #traxxasracing #rcnitro #nitrorc
Buy me a Coffee here: www.buymeacoffee.com/NWIRC
SUBSCRIBE to my TH-cam Channel:
/ @nwirc
Want to help the channel with rc related items or just want to help out with a donation..? Here's the link or check out my contact info below.
paypal.me/northwestindianaR
NWI RC contact info:
Joseph Sanfratello
Email: [e-mail]
Instagram: / northwestin. .
Facebook: / joseph.sanfr. .
My other TH-cam Channels:
BBQ JOE th-cam.com/channels/5o5.html...
Joe's Hydroponics th-cam.com/channels/ZlC.html...
#fastestnameinradiocontrol #traxxasrc #vintagenitrorc #northwestindiana #nwirc

[@nickkolczynskitattoo4865]

You’re starting issue may be caused from your one-way, bearing, failing or being too oily. You can take it out clean it. Use a little sandpaper or buy a new one.

[@nwirc]

Thank you. I ended up buying a new one and that fixed the issue.

[@rcsendandblast1579]

Ohhh yeah. She’s running Awesome.
👊😎

[@nwirc]

I think my cousin is going to love it.

[@rcsendandblast1579]

@@nwirc your a good man setting it up for your cousin that’s great 👊😎
I built a 4 S Outcast all nice and extra stuff on it. They love it.
The hobby it brings the magic. Rekindled Passion ❤️🙏😊

[@Drumbone71]

Sounds sweet!

[@nwirc]

Thanks

[@djcoolv4084]

I love the revo but hate that ex start I have the platinum had to pull start or starter box

[@nwirc]

That's what I'm going to do if this one fails.

[@RickyD1968]

FYI The Revo and the Tmaxx you have to choke it every time !!!

[@nwirc]

Thank you. I will be sure to do that from now on.

[@michaelbrinkey8652]

Lean it out after its warm. Just dont overheat it. 2nd should hit

[@nwirc]

That's the plan.. Just breaking it in after sitting for 10 years. She's running good so far.

[@tommyjackson2480]

Needs a new one way bearing that's what is slippong

[@nwirc]

Thank you.. I replaced it and it works fine now. Thanks