As a retired teacher, I would grade this an A+. Your pacing, assurance, and production values were top notch and I look forward to giving this a try in the future.
Having worked in a bodyshop, this is an extremely well done step-by-step process for this repair! What's even better is that it's done with everything you can pick up at your local automotive shop over the counter. Because we had to take cleanliness to the next level to avoid customer complaints / re-dos at the bodyshop, I would also recommend painting the wheels on a cleaner surface, lessens the chance of dirt/dust particles flying up on to your work. Also, before the clear coat process, you could do a quick pat down with a Tack Cloth to make sure surface is clean as can be before you seal it in with the clear coat.
Who on earth paints their wheels???, iv'e painted plenty of rims over the years, however iv'e never painted my rims and tires together!. You do realize that a rim is not a wheel don't you, therefore when you state "painting the wheels on a cleaner surface" what are you actually referring to???
Just a word of warning, I work at a place put tires on rims, don't try to build up too much of that bondo on the lip of the rim. Especially if you intend on using lower profile tires, sometimes the bar we use to lift the bead off the rim can require some pressure and I wouldn't doubt that it could crack some off if you try to rebuild too much of the lip. Some shops may have different, more precise tools, but just thought I'd put it out there is all.
Why not just flip the rim so the inside is facing up? The tire only goes in from one side or the other so why scratch the finished side when you can scrape the side nobody sees.
@@danc1197 you should see how they take the tire off next time you need a tire, then you'll see why not. They don't know if it's a fixed rim they're not mind readers. And last he's just letting you know so you don't end up in the same spot.
11 hours! ... now figure out how much you paid... "yourself" / hr... minimum wages at a fast-food (burger flipper or cashier) job, down at Mikey D's, Jack in the box or KFC will give you something to compare against... plus cost of paint, supplies, sandpaper, will tell you if it was worth it. Add in the benefit of personal satisfaction - of knowing that the job was done right - 'cause you did it yourself (nothing beats the pride of workmanship you get when you do-it-yourself). Oh... no taxes either! I usually pay myself minimum wage of $50/hr. You saved about $500 - $600 cash! verses sitting on your ass watching music videos or texting your loser friends watching "porn' in the basement 'apartment' at home.
There will always be someone who can do it better or with better products or better techniques..etc etc..So I agree its DIY "GUIDE". Not a "this is the ONLY way to refinish a wheel"... haters gonna hate.. Good job Chris.
Literally Chris is a life changer thanks a lot man! I restored my bmw e36 by watching your videos everyday. Every videos are detailed and easy to follow.
I just got a ford expedition 2003, and everything Chris is showing me, is what I will eventually be doing to my car. he is such a great guy. usually you'd have to pay someone to show you how they do the things he does, but thanks to him I can do it all myself!
Hey Chris, awesome video. My son's mother has been driving around in an otherwise perfect town and country for years but for her corroded, scratched and oxidized rims that were so bad the clearcoat was flaking away, foggy and trapping dirt and brake dust....about 6 hours of stripping, sanding, primer, paint and 2K clear and she is blown away by how much she loves looking at her van again.... Thanks man, put a huge smile on my face!
I found your channel maybe a week ago and I just wanted to say thank you. I've learned so much it isn't even funny. I'm a woodworker and I wanted to pass something on to you that might help you save some money as well. I use a sandpaper called Abranet by Mirka. It costs a bit more than your average pack of sand paper, but its a mesh, so it rarely clogs and cleans very easy. It has saved me hundreds since I switched. I went from using half a pack per project to using only one abranet disk per three of four projects (They come 5 disks per pack, it comes in rolls and standard rectangles too). I've had to use them on steel and aluminum before and work great. Thanks again for your hard work, it is very much appreciated.
@@funtageHQ If you know how to google your smartphone becomes an invaluable tool, the knowledge of the entire human race at your finger tips, unthinkable magic 30 years ago.
K1DZ1NR4G3 I have a 2015 lancer gs was gonna go for an evo but that car note would of been triple of what I'm paying now plus it would of got me in a lot of trouble
Chris, your Fix-It videos are the best ones I've found by far. I for one am grateful to have found your channel and have been employing the things you've taught me through your videos with excellent results. Voted 'AWESOME' by Me!
Did my wheels today exactly as you said and it's perfect! Thanks very much for all your videos! I never would've thought, I could do some of the things you show and now I am encouraged to try more! And I absolutely love it! Me, who never really liked any form of DYI, but my passion for cars and your videos woke me. 😄 I tried some car stuff before, but it was very basic. But thanks to you I am learning new tricks to make everything better! Bought some tools, watched a lot of your videos and I am hyped! Keep up the superb content!
You are a mine of gold buddy... please don`t stop from what you are doing because you are doing great. This channel is more informative than the any book or tutorial. We cannot thank you enough for the hard work you are putting into these videos & cars!
Forgot to mention that when painting the back of the wheels, do not paint the mounting surface that contacts the hub. Doing that will create an uneven contact between the wheels and hub, that will cause vibrations. Awesome video.
@@charliewilliamssucks890 Anything that prevents paint from sticking there is fine. Like painters tape for an example. Remember to remove the tape and clean all the leftover glue from the tape after painting. Or you can just sand the paint away afterwards like the guy before me said.
Nonsense. If painted evenly the shim distance would be identical to the machined surface. Also, rattle can paint is extremely thin once the solvents flash off. The paint is typically only 0.005" in thickness which is roughly the thickness of human hair or a sheet of paper. Plus the torque generated by lug nuts threads will be in the thousands of pounds per square inch on the wheel face which will squish the fresh paint evenly. I own a Metrology and calibration laboratory where we calibrate torque wrench's, coating thickness gages, gage blocks to the millionths of an inch, etc. and measure automotive aerospace and medical parts daily on robotic Coordinate Measuring Machines. Ive been in hundreds of manufacturing facilities of all kinds and seen many processes. The thickness of rattle can paint does not surpass the dimensional runout tolerance of OEM and aftermarket wheels, let alone the machining tolerances of brake rotors and drums that they are mounted too. There is way more runout on those parts than you would ever get with a layer or 2 of rattle can spray paint.
Chris big thank you from England, have watched all videos over the last 6 months. I am a plumber by trade and have just bought and sold my first 2 cars. I am now working on my first 7 seat Opel Zafira and refurbishing some "old" new alloys. Thank you for your content
dude hes got nearly 5million at this point this comment is insulting to other channels that are also good but dont have nearly as many subs as as they should.
He does good videos, but there are many other excellent videos on youtube that don't even have half the attention... Subs, likes, comments, etc. There will never be enough!!!
The first time i watched one of your videos i was hooked. There is nobody who explains things as simple and knowledgeable as you. These are the most informative yet simple videos as far as car detailing, normal upkeep, ways to prevent future damage to all cars, trucks, motorcycles, and whatever else you decide to fix. Keep these quality videos comming and thanks for the knowledge i now have. Its like having a personal mentor for free. It gets no better than this. Thanks CrisFix.
Just curb rashed my wheel today and was heart broken. When looking up how to fix it, Chris Fix it popped up. I was instantly relieved. Of course the video is perfect in everyway. Chris is the f*&king man! Thank you!
just finished watching some of your earlier vids (drumbrake restoration, exhaust painting) and I gotta say, the quality of your videos have shot upwards. now, you're much more confident and you do not speak as monotone, the editing has improved as well! keep up the good work
Excellent description of repairing a car wheel. Very well thought-out & explained. Pre-planned and filmed to perfection. Not too fast... and certainly not too slow. Very clear voice which enthuses the listener. Ten out of ten.
I’m pretty sure you do realise this, but you have become legend. Your videos are far reaching both throughout time and around the globe, and boy do they help. A deeply felt thank you is needed. Greetings from Switzerland Chris!
I found that plastic metal works well for repairing alloy wheels. It's easy to use and incredibly strong. I was able to sand it down easily and paint it with a touch up pen.
Great video, thank you. A little warning about rims at junk yard: They might be bent which would make them useless without serious and expensive repair
“…and that’s just a feeling you can’t beat…” couldn’t have said it better myself! That feeling is literally priceless! Thanks for the awesome content Chris!
I think if anyone saves money off your tips they should pay you a donation of at least $5 and up. it's freaking worth it. make it so Chris, put a donate button somewhere if TH-cam doesn't let you then do like other places and use some of the funding places and put a link to it, I am ready to give, you saved me a lot.
I really enjoyed ChrisFix videos, I have learnt a lot about car systems and how to fix from easy to more complex car issues. At the same time, I have already saved thousand of dollars. The videos are very well done, nice edition and easy to understand procedures. Thank you ChirsFix.
I swear dude whenever one of your videos gets in my sub box I feel like going into the garage, stripping my car down and fixing something lol. Another great video :)
AndreAgonia I'm the exact same way. On a video he did a few months ago, he was showing u how to fix a flat tire and when the video was done I went to check the pressure in my tires lol. You're not the only one lol 😂😂
also should remind people to ask for the stick on wheel weights instead of the clip on ones that can chip the edge of the rim when using bondo repair when getting tires balanced
+ChrisFix lol it was meant to be a joke... Do you know what a rim job is? None the less it was a great video! The results were amazing. I appreciate your attention to detail.
Gregory Najar I just did a fucking curb rash like 25 min ago. I was sneaking back home and fucking went to close to the fucking curb. Luckily it’s just a small spot and that’s why I’m watching these videos lol. 🤦🏽♂️
ChrisFix no problem, I've just always loved your videos, I showed your videos to my dad, and he used multiple if them to fix his 1999 BMW M Roadster, for some examples, he used this video to fix the Curb Rash on his rear left rim, and he used the how to super wash your car to clean it, then he won a car show!
ChrisFix Hey boss man, awesome videos as usual! You ever done a video on pitman or idler arm yet??? Would love to see one. Keep up the fantastic editing and commentary!!!!!!
Dear Chrisfix, my husband hates you. Thanks to you and your great videos and awesome explanations, he's had to fix our entire car and the neighbors 😊 thank you -Lots of love
This gives me hope man. I just bought myself an Infiniti M37XS and the sport wheels on it are hard to find. Unfortunately the previous owner really best them up but after watch this I feel like I am fully capable of fixing and repainting the wheels back to factory paint! Thanks so much dude. First step, take them to a repair shop to get bent back to shape
For a wheel, I would take some shortcuts. However, it's always best to see how a thorough procedure is done to fix something first in order to understand each step's purpose.
Man, this dude is really working his ass off! I feel tired just watching his videos let alone actually implementing his advice in real life.😬 Definitely, this channel is one of the most deserved of his subscribers and views out there!
Just bought a set of wheels for $250 with good tires cause of the curb rash. I'm about to start cleaning them up this week. Thanks bro, I remembered this video from YEARS ago and got the second dose of inspiration I needed to dive in.
Cory M if he repents of his sin and places his faith in Jesus Christ as Lord and savior by becoming born again of the holy spirit and living a life after Gods heart.
Hi Chrisfix, I'm super impressed with the mag resto mate. those Jag mags were really beat to shit when you first got them, and you did it again. just bloody brilliant work Chris. top marks for this video buddy. love ya work mate. 😎👍
This guy is really good what he saying and doing the job . I was amazed i kept watching this video about alloy wheels . It as saved me lots of money as im in the uk 🇬🇧 . I done each stage what Chris did and my alloys have turn out really good like they had been in a work shop refurbished. Thanks Chris love all your videos . Roy from the uk . 🇬🇧
Chris I’d like to say massive thank you! I recently bought 2006 Audi A6 4.2L V8 S-LINE Quattro for $3.5K Canadian. It has 200K KM on but it’s great. Did my own engine filter, spark plugs and ignition coils with tools all around $700. Audi was gonna to charge me $1.7K lmao. Next I wanna do the wheels and paint the brake caliper :)
***** He has a video of him doing a repair with the tires on on his channel. I think the thumbnail is a picture of a rim with business cards all around it
I’m going to throw a Chris Fix party. We will watch every video he has. You will take a shot for every time he says “Holy smokes” “Just like that” or spray paints his camera.
ChrisFix Well, you're talented at what you do, not everyone can do it as good as you, including me! Either way you inspire me, my next project will definitely be cleaning under my hood 😉👍🏽 Hey, while I have your attention, just an idea to help your channel grow, I'm sure your subscribers would be very appreciative if you made an updated video on how to tint windows! I surely would! :)
@@SpaceMissile Hehe - this stuff here can produce mediocre results even for the patient ones. What is needed is actual practice :). It's not skills that comes to the patient ones, it's skills that comes to the guys putting a lot of time into practicing it. I've done a LOT of bodywork on cars, and I'm very good at that stuff when it comes to fiberglass and "bondo". Metal bodywork however, I can do with mediocre results, not because I'm not patient hehe - but I never cared enough about putting time into honing those skills.
I know this video is 6 years old, but I have some old Fox-Body ponys I want to freshen up. Your vids have helped me a ton in the past and I'm going to give your method a shot. Thanks.
As a retired teacher, I would grade this an A+. Your pacing, assurance, and production values were top notch and I look forward to giving this a try in the future.
Someone give this man his own show
I do have my own show! You're watching it now!
@@imiraxle1955 you meen 10 years
@@jakegerrior6277 um no
Um...
@@chrisfix a
Having worked in a bodyshop, this is an extremely well done step-by-step process for this repair! What's even better is that it's done with everything you can pick up at your local automotive shop over the counter. Because we had to take cleanliness to the next level to avoid customer complaints / re-dos at the bodyshop, I would also recommend painting the wheels on a cleaner surface, lessens the chance of dirt/dust particles flying up on to your work. Also, before the clear coat process, you could do a quick pat down with a Tack Cloth to make sure surface is clean as can be before you seal it in with the clear coat.
Who on earth paints their wheels???, iv'e painted plenty of rims over the years, however iv'e never painted my rims and tires together!. You do realize that a rim is not a wheel don't you, therefore when you state "painting the wheels on a cleaner surface" what are you actually referring to???
I love how my bro always uses stuff we can use like common working people instead of these fancy things common people don’t have
Bro that's the only reason I watch his vids!
Yeah I'm tired of people recommending $1000 one time use tools
A dremel is only $40
Yi
@@anthonydecesare1847 has come
Just a word of warning, I work at a place put tires on rims, don't try to build up too much of that bondo on the lip of the rim. Especially if you intend on using lower profile tires, sometimes the bar we use to lift the bead off the rim can require some pressure and I wouldn't doubt that it could crack some off if you try to rebuild too much of the lip. Some shops may have different, more precise tools, but just thought I'd put it out there is all.
Why not just flip the rim so the inside is facing up? The tire only goes in from one side or the other so why scratch the finished side when you can scrape the side nobody sees.
@@danc1197 Incompetence from my local mechanics is I could say.
good tip actually
Dan C if you flip the rim you cant get off the tire
@@danc1197 you should see how they take the tire off next time you need a tire, then you'll see why not. They don't know if it's a fixed rim they're not mind readers. And last he's just letting you know so you don't end up in the same spot.
Took me 11 hours to do all 4 wheels but damn they look amazing now.
Awesome!!!!
11 hours! ... now figure out how much you paid... "yourself" / hr... minimum wages at a fast-food (burger flipper or cashier) job, down at Mikey D's, Jack in the box or KFC will give you something to compare against... plus cost of paint, supplies, sandpaper, will tell you if it was worth it.
Add in the benefit of personal satisfaction - of knowing that the job was done right - 'cause you did it yourself (nothing beats the pride of workmanship you get when you do-it-yourself). Oh... no taxes either! I usually pay myself minimum wage of $50/hr.
You saved about $500 - $600 cash! verses sitting on your ass watching music videos or texting your loser friends watching "porn' in the basement 'apartment' at home.
Small Town Loner how many cans of all 3 did you use???
@@JustinAEgan you forgot to add experience and savings on the next job.
It costs 220 euro in Greece, I'm thinking of doing it myself. Two wheels are in terrible condition the rest not much.
One of the best TH-cam channels
Thanks!!!
You are welcome thank you for these wonderful videos
No..
The best!
Couldnt agree more
Erin. ..in Philadelphia me pooml l.
.mom
Hey Chris, there hasn't been a single video of yours which hasn't been perfect. You deserve a spot in the hall of fame Sir!
Thanks!
How can people dislike this video? It is literally just a DIY help guide.
There will always be someone who can do it better or with better products or better techniques..etc etc..So I agree its DIY "GUIDE". Not a "this is the ONLY way to refinish a wheel"... haters gonna hate.. Good job Chris.
TH-cam. That's why.
There will always people who "THINK" they can do it better.
I think he did this one before?
+Mr Cornwall I don't think you could do a better job than this. They look beautiful! Lol also he's a perfectionist.
Literally Chris is a life changer thanks a lot man! I restored my bmw e36 by watching your videos everyday. Every videos are detailed and easy to follow.
Awesome
I just got a ford expedition 2003, and everything Chris is showing me, is what I will eventually be doing to my car. he is such a great guy. usually you'd have to pay someone to show you how they do the things he does, but thanks to him I can do it all myself!
Knoa Fox your also gonna make your expedition a drift car or should i say suv??😂😂😂😂
thank you for letting us know
Knoa Fox you are paying him by watching his video
Eww a Ford? You're better off just junking that piece of shit.
@@Hachiko814 and getting a...? Chevrolet GMC Dodge
Hey Chris, awesome video. My son's mother has been driving around in an otherwise perfect town and country for years but for her corroded, scratched and oxidized rims that were so bad the clearcoat was flaking away, foggy and trapping dirt and brake dust....about 6 hours of stripping, sanding, primer, paint and 2K clear and she is blown away by how much she loves looking at her van again.... Thanks man, put a huge smile on my face!
I found your channel maybe a week ago and I just wanted to say thank you. I've learned so much it isn't even funny. I'm a woodworker and I wanted to pass something on to you that might help you save some money as well. I use a sandpaper called Abranet by Mirka. It costs a bit more than your average pack of sand paper, but its a mesh, so it rarely clogs and cleans very easy. It has saved me hundreds since I switched. I went from using half a pack per project to using only one abranet disk per three of four projects (They come 5 disks per pack, it comes in rolls and standard rectangles too). I've had to use them on steel and aluminum before and work great. Thanks again for your hard work, it is very much appreciated.
Man, I can't tell you how much I admire your encyclopedic knowledge on all things related to cars.
You really know your stuff!
Dude, a bit of googling will tell you everything you need to know lol.
couldn't agree more but the problem is google has a million different answers..
@@funtageHQ If you know how to google your smartphone becomes an invaluable tool, the knowledge of the entire human race at your finger tips, unthinkable magic 30 years ago.
@@hiiambarney4489 it’s not that deep bro
The power of shared knowledge, were we all learn to grow to become a better human beings. Thank you and great Work!
Am I the only one that’s finds it so satisfying when he sprays the camera with clear coat?
that was one of the best tutorials I've ever seen on youtube. kudos
Thanks a lot Vince!
you're welcome hilda
Subscribe. This guy is very informative.
This channel is awesome I'm 18 and I just got my lancer I can't wait to start working on it I already did my first oil change myself.
you have a long and beautiful DIY journey ahead of you my friend
TopDawgEntLV702 what model?
K1DZ1NR4G3 I have a 2015 lancer gs was gonna go for an evo but that car note would of been triple of what I'm paying now plus it would of got me in a lot of trouble
you're 18 and already got a 2015 model? shit! I just bought my first car, and it sa vw golf 4 1999! But its great, just need some work :P
TopDawgEntLV702 lancerrrr gang!!!
Chris, your Fix-It videos are the best ones I've found by far. I for one am grateful to have found your channel and have been employing the things you've taught me through your videos with excellent results.
Voted 'AWESOME' by Me!
Did my wheels today exactly as you said and it's perfect! Thanks very much for all your videos! I never would've thought, I could do some of the things you show and now I am encouraged to try more! And I absolutely love it! Me, who never really liked any form of DYI, but my passion for cars and your videos woke me. 😄 I tried some car stuff before, but it was very basic. But thanks to you I am learning new tricks to make everything better! Bought some tools, watched a lot of your videos and I am hyped! Keep up the superb content!
How is your repair holding up one year later?
Yeah that would interest me as well. How's it after a year?
Tell the public
You are a mine of gold buddy... please don`t stop from what you are doing because you are doing great. This channel is more informative than the any book or tutorial.
We cannot thank you enough for the hard work you are putting into these videos & cars!
No one can be this talented! Some one give this man an award. Much love my friend & Thank you!
Forgot to mention that when painting the back of the wheels, do not paint the mounting surface that contacts the hub. Doing that will create an uneven contact between the wheels and hub, that will cause vibrations. Awesome video.
How would you recommend covering? Special tape or cloth?
@@charliewilliamssucks890 u can still paint it just wipe that area fast or sand til it shows metal again
@@charliewilliamssucks890 Anything that prevents paint from sticking there is fine. Like painters tape for an example. Remember to remove the tape and clean all the leftover glue from the tape after painting.
Or you can just sand the paint away afterwards like the guy before me said.
Also if you don’t let’s the lug nut holes cure you may have to keep checking them after every drive for loose
Nonsense. If painted evenly the shim distance would be identical to the machined surface. Also, rattle can paint is extremely thin once the solvents flash off. The paint is typically only 0.005" in thickness which is roughly the thickness of human hair or a sheet of paper. Plus the torque generated by lug nuts threads will be in the thousands of pounds per square inch on the wheel face which will squish the fresh paint evenly. I own a Metrology and calibration laboratory where we calibrate torque wrench's, coating thickness gages, gage blocks to the millionths of an inch, etc. and measure automotive aerospace and medical parts daily on robotic Coordinate Measuring Machines. Ive been in hundreds of manufacturing facilities of all kinds and seen many processes. The thickness of rattle can paint does not surpass the dimensional runout tolerance of OEM and aftermarket wheels, let alone the machining tolerances of brake rotors and drums that they are mounted too. There is way more runout on those parts than you would ever get with a layer or 2 of rattle can spray paint.
Chris big thank you from England, have watched all videos over the last 6 months. I am a plumber by trade and have just bought and sold my first 2 cars. I am now working on my first 7 seat Opel Zafira and refurbishing some "old" new alloys. Thank you for your content
A really well-done “how to” guide. I’ve been restoring for years yet I still learned plenty.
to all the viewers or people who might read this chris deserves more subs !!! dont you think ???
dude hes got nearly 5million at this point this comment is insulting to other channels that are also good but dont have nearly as many subs as as they should.
He does good videos, but there are many other excellent videos on youtube that don't even have half the attention... Subs, likes, comments, etc. There will never be enough!!!
Chris is having full command on his subject thats why he makes things so much easy and understandable.
A Devoted man
'I fixed them. I restored them myself to like new condition. And you can do the same. And that's just a feeling you can't beat!'- so true!
Honestly one of the best car repair at home channels, Keep up the great work!
Thanks George!
and this is how you do rim jobs in you driveway without scaring the neighbours
LOLZ...I think?
lol
Why is this not top comment?
Tom's the ta
Lmfao
The first time i watched one of your videos i was hooked. There is nobody who explains things as simple and knowledgeable as you. These are the most informative yet simple videos as far as car detailing, normal upkeep, ways to prevent future damage to all cars, trucks, motorcycles, and whatever else you decide to fix. Keep these quality videos comming and thanks for the knowledge i now have. Its like having a personal mentor for free. It gets no better than this. Thanks CrisFix.
Just curb rashed my wheel today and was heart broken. When looking up how to fix it, Chris Fix it popped up. I was instantly relieved. Of course the video is perfect in everyway. Chris is the f*&king man! Thank you!
just finished watching some of your earlier vids (drumbrake restoration, exhaust painting) and I gotta say, the quality of your videos have shot upwards. now, you're much more confident and you do not speak as monotone, the editing has improved as well! keep up the good work
Thanks a lot! I always try to improve my video quality every time!
Man this is been my favorite channel for 4 years and continuing
I'm glad this is your favorite channel! Thanks for the ongoing support!
@@chrisfix bro your amazing you’ve saved my life multiple times, keep up the good work!
Excellent description of repairing a car wheel. Very well thought-out & explained. Pre-planned and filmed to perfection. Not too fast... and certainly not too slow. Very clear voice which enthuses the listener. Ten out of ten.
I’m pretty sure you do realise this, but you have become legend. Your videos are far reaching both throughout time and around the globe, and boy do they help.
A deeply felt thank you is needed. Greetings from Switzerland Chris!
I found that plastic metal works well for repairing alloy wheels. It's easy to use and incredibly strong. I was able to sand it down easily and paint it with a touch up pen.
This channel is the best DIY! Plz never stop!!!
+Jason Hamelin thanks a lot
Chris you’re my favorite car guy on TH-cam.. really professional and smart.
Thanks
I’m only 3 mins into this video and this guy is NICE w it. Getting straight to the point, and everything is understood and comprehensive. I love this.
Great video, thank you.
A little warning about rims at junk yard: They might be bent which would make them useless without serious and expensive repair
14:49 That's some crazy big camera in the reflection... I can tell there's been loads of effort been put into this... Thanks Chris
You did an amazing job , and im a jag snob , loved when that center cap snapped into place 😍😍😍😍
Thanks a lot
“…and that’s just a feeling you can’t beat…” couldn’t have said it better myself! That feeling is literally priceless! Thanks for the awesome content Chris!
I think if anyone saves money off your tips they should pay you a donation of at least $5 and up. it's freaking worth it. make it so Chris, put a donate button somewhere if TH-cam doesn't let you then do like other places and use some of the funding places and put a link to it, I am ready to give, you saved me a lot.
I would be a millionaire by now haha. That would be awesome! Thanks a lot and I am glad the videos are helpful!
ChrisFix
www.patreon.com/ many TH-camrs from like Dnews, SciShow and many other use. Seems to work rather well. Try it out.
I agree. Ill donate. think of it as is buying you some more tools or something :)
Ahmad Ghosheh if you are an Indian so am I
If you put up a bitcoin address I'll send you a couple bucks
A motivating tutorial with excellent editing and content pacing! Thank you for your great work, Chris!
i spent hours repairing my $20 set of wheel covers, now they look just like new!
Bob Swardson boi
your joking? Those rims are over $ 500.00 each in Canada,lol.
T those shitty walmart hubcaps? Lol. 20-30$ at most.
That is funny, reminds of me shopping for wheel covers for my old 1992 Toyota Corolla that I sold in 2014.
I laughed so hard 😂😂
My curb rash is bad but watching all these videos from cris saves me thousands
I really enjoyed ChrisFix videos, I have learnt a lot about car systems and how to fix from easy to more complex car issues. At the same time, I have already saved thousand of dollars. The videos are very well done, nice edition and easy to understand procedures. Thank you ChirsFix.
I swear dude whenever one of your videos gets in my sub box I feel like going into the garage, stripping my car down and fixing something lol. Another great video :)
That is awesome! I am glad you enjoy the videos and I am sorry I am fueling your car fixing addiction haha #sorrynotsorry
AndreAgonia I'm the exact same way. On a video he did a few months ago, he was showing u how to fix a flat tire and when the video was done I went to check the pressure in my tires lol. You're not the only one lol 😂😂
I agree with Andrea and I do not even have a car !
You sir are not alone! 👍
also should remind people to ask for the stick on wheel weights instead of the clip on ones that can chip the edge of the rim when using bondo repair when getting tires balanced
Great tip! I hope Chris sees it.
Why can't I upvote comments on android TH-cam?
They could place the clip ons on the inside of the wheel as well
How Does tris balance clip work?
Because Android.
+Kim Jong-Il yes you can.
Best diy car repair/maintenance channel on TH-cam easily.
This guy's an immortal mechanic. He's just infinite with his trick and tips.
ChrisFix - “Get a dust mask on” People in 2020 - “Guess I’ll just have to breath it in”
Fuckin basically
If you want to know how repair rims you have to see this account in Instagram @kingrepair1229 that people know too
@@juancarlosyanezmolina2898 i watched Chris fixing rims and now i know how
My man. You are good at making videos. Thank you for the hard work.
Thanks a lot!
One thing that makes your videos so good is that you think it through before you start and say what needs to be said!
Making sure the boso who refits your tyre doesn't scratch the shit off again. Great video once again Chris
The guy I took it to was awesome! Super careful.
Anyone know where I can get some ChrisFix Soapy Water?
**soapy wooder 😂😂
Highlander Hybrid Check your local hardware store
Check out his site. He is now selling Soapy Wooder stickers. Just bought some :)
chrisfixed.com/store.php
Nice rim job
Thanks!
LMAOOOOOOO
Good one! LOL
I see what you did there
+ChrisFix lol it was meant to be a joke... Do you know what a rim job is? None the less it was a great video! The results were amazing. I appreciate your attention to detail.
Not gonna lie I learned a lot watching your videos . I love how detailed you are when teaching is how to repair and swap parts
I did this and my mom fucked up my rims three days later LOL.
Gregory Najar how
FORC3OFX F3AR nasty curb rash
F
Gregory Najar I just did a fucking curb rash like 25 min ago. I was sneaking back home and fucking went to close to the fucking curb. Luckily it’s just a small spot and that’s why I’m watching these videos lol. 🤦🏽♂️
My condolences to your family. I hope you were merciful and quick.
This guy is the best TH-camr ever wtf
This video never get old👍 chris fix
Thanks Juan!
Re-watching all these videos while I prep my mustang for selling is bliss 😌 You the homie for making the best how to videos
You always says amazing! But, you are the one who is amazing!! Love your videos! keep up the Great Work!
Thanks
I remember when you were at 1,000 subs, now you're almost at 1.5 mil
Thanks for the support! I cannot believe I have fans who were with me all the way back then! That is amazing!
ChrisFix no problem, I've just always loved your videos, I showed your videos to my dad, and he used multiple if them to fix his 1999 BMW M Roadster, for some examples, he used this video to fix the Curb Rash on his rear left rim, and he used the how to super wash your car to clean it, then he won a car show!
That is awesome man!!!
ChrisFix yeah😄😄 I'm gonna find out how to put pictures in the comments, so I can put the results
ChrisFix Hey boss man, awesome videos as usual! You ever done a video on pitman or idler arm yet??? Would love to see one. Keep up the fantastic editing and commentary!!!!!!
Dear Chrisfix, my husband hates you. Thanks to you and your great videos and awesome explanations, he's had to fix our entire car and the neighbors 😊 thank you -Lots of love
Haha, I am glad you and your husband are learning a lot!!!
This gives me hope man. I just bought myself an Infiniti M37XS and the sport wheels on it are hard to find. Unfortunately the previous owner really best them up but after watch this I feel like I am fully capable of fixing and repainting the wheels back to factory paint! Thanks so much dude. First step, take them to a repair shop to get bent back to shape
I don’t have a car but i am learning a lot
Same lol. I want to start flipping cars though so I'm trying to learn as much as I can.
Get a car then. It's an extra arm
Said this once before and I'll say it again, you sir are a boss. Lol
Thanks a lot!
i am so impressed with the outcome. although you make it seem pretty simple, i'm sure it was a lot of work, but it certainly shows. well done!
For a wheel, I would take some shortcuts.
However, it's always best to see how a thorough procedure is done to fix something first in order to understand each step's purpose.
@@cometcal2 Not sure if I would take shortcuts for wheels, because they are the most prone to wear. You def. want the coatings to be stable and clean.
Chrisfix has single handedly created his own empire of car repair and detailing all by himself. Someone should give him a show.
Really good video, too much like work for me, but amazing how you saved the used wheels, looks like new.
Thanks Chuck!
One of the best DIY videos I have watched.
Thanks!
Dude, you’re amazing
Thanks
Man, this dude is really working his ass off! I feel tired just watching his videos let alone actually implementing his advice in real life.😬 Definitely, this channel is one of the most deserved of his subscribers and views out there!
Thanks Chris, I need to fix curb rash and re chrome mine
i love it how you give that safety informations to protect Your subs 😆🙋
Omg this is amazing 😭😭😭 hopefully I’ll be brave enough to try after watching 20times
I won't need to automotive school because of you. Many thanks and much love from the islands..✊✊✊
i love how he says "half"!! it's so different to how we say it in england!! Sooo satisfying lol
love you chris fix!!
Depends where in England you're from, I'm from North East and probably say it differently to you lol
arf
Yeah innit
@@dank7319 North West England?
do a vid of engine cleaning and a good detail of inside
Stay tuned ;)
ChrisFix did you make a video of this yet??? :)
I think I saw in another video that he is doing that soon
It's finally live!
Jeffry Carrascal english xtr citroen cabin filter show me where it is
Can you do a video on super cleaning the inside of the car? Thank you for sharing your knowledge!
Pam Jones, that's coming soon, he has to clean the inside of the vandalised car.
Just bought a set of wheels for $250 with good tires cause of the curb rash. I'm about to start cleaning them up this week. Thanks bro, I remembered this video from YEARS ago and got the second dose of inspiration I needed to dive in.
So much work for just a wheel... I would've cry if I scratch the wheel the next day :/
chuk90 I bet it’s therapeutic for him to work on cars, really his passion, he doesn’t mind.
look fun i kinda want to do it to my car
HAHAHAHAHA! that's exactly what till happen. First pothole....I give up!:P hahaha
Your going to heaven!! Great video. Proud to be apart of the ChrisFix fam.
Thanks a lot Cory!
Cory M if he repents of his sin and places his faith in Jesus Christ as Lord and savior by becoming born again of the holy spirit and living a life after Gods heart.
Hi Chrisfix, I'm super impressed with the mag resto mate. those Jag mags were really beat to shit when you first got them, and you did it again. just bloody brilliant work Chris. top marks for this video buddy. love ya work mate. 😎👍
Thanks a lot man! I really appreciate it!
This guy is really good what he saying and doing the job . I was amazed i kept watching this video about alloy wheels . It as saved me lots of money as im in the uk 🇬🇧 . I done each stage what Chris did and my alloys have turn out really good like they had been in a work shop refurbished. Thanks Chris love all your videos . Roy from the uk . 🇬🇧
Thanks Roy!
Great work, Chris. Those aftermarket wheels were fugly.
Thanks a lot!
Thanks a lot!
You're like the big brother I always wanted
Awesome Jamie! Glad you're learning a lot!
My brother is a bully who just doesn't understand the importance of cars to me
I love to watch your videos chris fix
Thanks Salman!
+ChrisFix 😊
Chris I’d like to say massive thank you! I recently bought 2006 Audi A6 4.2L V8 S-LINE Quattro for $3.5K Canadian. It has 200K KM on but it’s great. Did my own engine filter, spark plugs and ignition coils with tools all around $700. Audi was gonna to charge me $1.7K lmao. Next I wanna do the wheels and paint the brake caliper :)
Very classy, great job!
Thanks!
I bondo'd my 14's to some 24 inch floaters, thanks cris.. Chevy Riding High
+All2skitzd hahaha
*****
He has a video of him doing a repair with the tires on on his channel. I think the thumbnail is a picture of a rim with business cards all around it
I’m going to throw a Chris Fix party. We will watch every video he has. You will take a shot for every time he says “Holy smokes” “Just like that” or spray paints his camera.
Im not sure if that's even going to be safe. Everybody would be *blanked* up
He just put a clear plastic shield wen he sprayed camera ……No worries
I bought some rims from a used place last weekend. I saw problems with the rims and remembered this video.. can't wait to spiff them up.
You're so motivating. But the actual work demotivates me xD thanks for your content!
The work is the best part! It is fun!
ChrisFix Well, you're talented at what you do, not everyone can do it as good as you, including me! Either way you inspire me, my next project will definitely be cleaning under my hood 😉👍🏽
Hey, while I have your attention, just an idea to help your channel grow, I'm sure your subscribers would be very appreciative if you made an updated video on how to tint windows! I surely would! :)
what you mean is that you're not patient enough to do it right. ;P
CaptiN __ Dude, Man up. No pain no gain.
@@SpaceMissile Hehe - this stuff here can produce mediocre results even for the patient ones. What is needed is actual practice :). It's not skills that comes to the patient ones, it's skills that comes to the guys putting a lot of time into practicing it. I've done a LOT of bodywork on cars, and I'm very good at that stuff when it comes to fiberglass and "bondo". Metal bodywork however, I can do with mediocre results, not because I'm not patient hehe - but I never cared enough about putting time into honing those skills.
The feeling of DIY is great. 👍
I know this video is 6 years old, but I have some old Fox-Body ponys I want to freshen up. Your vids have helped me a ton in the past and I'm going to give your method a shot. Thanks.
12:16 instructions unclear drank the alcohol and woke up tuesday on a boat to Antarctica
That is rubbing Alcohol....
suomi?
"Its not the same kind of alcohol" it's still funny. Bunch of fun sponges
Suomi perkele
😂😂