OUR FIRST TIME WRAPPING A CAR...this is how it went! Part 1: Prep, Learning, NEW PARTS!
ฝัง
- เผยแพร่เมื่อ 25 ก.พ. 2023
- We tried wrapping our $2000 BMW E36 M3 that we bought from Copart wrecked car auction a few years back! We decided to use a $500 roll of vinyl wrap that I found online in a cool color that I had never seen before. Since this was our first time wrapping, we had a few issues and had a lot to learn. Our 1995 E36 M3 Coupe also had a rough life and had a lot of broken panels and pieces which needed to be replaced. CarParts.com wanted to help out with this project and sent us over a bunch of new car parts for our BMW M3. They have parts for all makes and models so check them out next time you need something for your vehicle (Link: bit.ly/3OdjQ7W). We still have a lot of work to do to finish this project car, don't forget to like, subscribe, and share! Thanks for watching!
CarParts.com Link: bit.ly/3OdjQ7W
Support my channel by becoming a member using this link: / @shoplifetv
My Amazon Store: www.amazon.com/shop/shoplifetv
Buy My Merchandise: www.shoplifetv.com
Need Help with your car ask me a question on: www.shoplifetv.com
Instagram: @ShopLifeTV
/ shoplifetv
TH-cam Business Inquires: Email me amotorwerks@gmail.com
Disclaimer: Some links will contain affiliate links - ยานยนต์และพาหนะ
I appreciate each and everyone of you that support us! If it wasn't for you all we wouldn't be able to do things like this and continue to grow and learn! Also thanks to CarParts .com for all the parts that will help us finish our E36 M3. Check them out: bit.ly/3OdjQ7W next time you need parts! See you in Part 2!
Yo I’m a professional wrap installer if u tryna do a collaboration
@@Jaywrapstarwhere do you order you vinyl wrap ? I have a couple of weeks off from work and would I like to practice on my second car as a new hobby. Do you know of any good cheap vinyl that I could start off with
My father used to say: 'To reach the next level, you have to make mistakes. Otherwise, you stay at the same level!'. He was damn right. I learned a lot by making mistakes. Good luck brother and sister, Nico.
Thanks Nico! I agree with your father!
Since I can’t heart comments I’ll just leave one ❤ wise words
Glad we could help out with some parts for the E36! 🙌
the knifeless tape works if you use it twice on every line, so lay 1 piece down cut with tape lay more tape then the next layer of vinyl and cut again! XD which overlaps the vinyl :)
Always fun to watch the newbies try wrapping, interesting watching u make the same mistakes I did in my career. A tip of my experience... wuda worked fine if u kept the car intact and yeah, the hood needed to be sanded and resprayed.
Man that was a great video!!! Just don't understand how anybody could abuse a car like this, especially an M3.
Some people have a lot of money lol
@@ShopLifeTV I agree
Great team work 😊👍🏽👌. It's really brave learning something new.
OK I saw the heat gun never mind. Lol. I like it.
Bad ass color guys. Cant wait to see it finished.
Every time I watch a car wrapping video, I'm like yeah, I'm still not convinced it will come out to my liking. That green colour looks really nice, I'm sure you both will get it done well before we see the 💪👕 again!🤣✌
Hahaha I am not a huge fan of wraps due to the amount of texture that you can see. But it is great for people who like to change the color of their car frequently
Great job
Appreciate you’re videos always my man. Perfect timing too, about to wrap my e60 in the next few weeks!
Thanks Ethan! And good luck, hope it turns out awesome!
Trust the process! Looking bigger Jason and the bathroom reno looks amazing.
Yaw definitely motivated me good job
Nice work, guys. Your first attempt appears to be going really well. Can’t wait to see the finished product.
Thanks Rich! I am more curious to see how the wrap holds up with the various different surfaces and bad paint over this summer.
@@ShopLifeTV
I’m with you on that. It will be interesting to learn the real world effects, down the road.
Nice work, I love watching your videos!
Thank You!!!
E36 content!!! Yes and more please
More on the way!! Need to do some maintenance too!
This reminds me of Eric the Car Guy posting a video of trying to bleed his brakes, and having so many issues. Only to find out he installed the calipers on the wrong side. He had a great message about how everyone makes mistakes, the key is to learn and do better next time. Keep grinding!
Hey everyone. Let’s get these dynamic duo up to 500k In subscribers. Love the videos.
That would be awesome haha!! Thanks for watching and supporting us!
Thanks for the video!!!
Thanks for being the first to comment!
@@ShopLifeTV always try my best!
@@ShopLifeTV I really thought it was going to be alpine white tho :)
Hahaha maybe when we actually repaint the car!
Man, love the videos - wish u were in illinois for all my car work
Thanks man!
I’m wrapping my 06 X5
Indecisive, impatient, AND impulsive?? yeah I’m at the right place.
Hey really enjoyed the video, so much that i watched it twice. I know its been a year but updates on how the vinyl held up, also can you share the link to where you bought your vinyl roll ?
2jz swap would be insane
Looks like you're going this route; but the most logical (IMHO) thing to do with the hood is sand and paint "good enough" to the point the paint is smooth and properly adhered. Just a good rattle can job and that's that. BTW, braver than I am; no way in hell I'd try wrapping a car!
It's not bad take time get right tools I did my came out great
Its a lot easier to wrap the bumper on the car. Post heat the wrap before you use the tape so that there's no pull back. For the roof... you should knifeless tape once for the original underlay then add the tape over the underlay ( line it up ) then wrap over that and knifeless cut it again so that you have a smooth barely noticeable line.
That's the plan for next time or if we have enough wrap left over to re do the roof!
As someone who wrapped their own E46 at home. You hit the nail on the head with every panel. The front bumper sucks. I did mine outside during a windy week. I did the prep the first 2 days and wrap the ther 5 days. I ordered my wrap from metro restyling.
Thats awesome! Doing it outside must have been rough, I could only imagine the amount of debris that would get on the panels while wrapping lol!
@@ShopLifeTV yeah! It's held up pretty well so far! But there are spots that have come up. I ordered extra to be safe because of the shortages. I went with Magnetic burst blue from Avery.
Please use the standard mirrors
I don’t mind the tiny mirrors lol
Unfortunately I was most interested in the side skirts! How did you do the upper ending at the rubber seal? Looks quite clean on yours, but in the other hand the rubber as well as your base are both black. So that'll probably blend in easily.
you stated early in the the vid that the vinyl is designed to adhere to metal only, an then you did the side skirts. Does this mean that when and where ever you get a wrap done, the plastic pieces will pose premature issues vs the metal parts?
The vinyl is meant to stick to smooth surfaces, it doesn't have to be metal. But we did wrap the nose panel that had the e-coat on it as well as the front bumper that was not painted. I am curious to see how these parts will hold up over time.
What kind of wrap and how much of it did you use?? I'm looking to do the same on my car . This definitely give me confidence. Thank you
Gyaaattt
Heat gun!!!!
Hey bro , what could you recommend I try for my 2000 323 e46 , as it’s a m52 auto and between 3 to 4 gear I will need to let off the gas or just gas through it for it to change as has a little trouble getting into the last gear , would usually be bang on around 80km per her also
Lamo it was hard to pick a color mmm got a idea white! Lamo 🤣
I need to see this car complete or my life will be incomplete
bro please what color/brand is the wrap, im tryna do that on my Z3
hello hopefully someone reads this and can guide me in the right direction
i have a e46 2000 5 speed blue sticker throttle body i keep going into eml and dsc limp mode and getting throttle body codes replaced with reman and then new oem reset the adaptations and still it goes into limp mode also replaced the IACV i checked the connector of the throttle body and it looks good checked my DME connectors also looked good
I'm pretty helpless at this point.
so bad that you live not in CA i could help you. There are a lot of secrets,,,,,,,,,
Lots of secrets and lots of patience lol
Have you watched Paradox the Wrapper on here?
I'm surprised you guys didn't use a heat gun
Now this is what I’m talking about
Wrapping is a pain in the ass if you're not skilled at it. I know i would curse the crap out off it. Curious on your next video.
2j?
I describe that colour as milk vomit white
Every car after the e36 was easy to take apart. E36 is terrible lol
I have yet to see a E36 with decent door panels lol
Check out Paradox The Wrapper 👈 😎
Will do!