Repairing, Removing, and Replacing Small Tires

Find a leak in a tire, replace valve stems, remove small tires from atv, go kart, and lawn mower rims, replacing small tires. I lost the video on resetting the bead, but this fella here has a great channel and resets the bead just like I learned how. If you need help resetting the tire bead check out this video:
• How To Seat The Beads ...
Valve stem removal tools and replacement valve stems: amzn.to/33lPPuY
Don't have a Harbor Freight? Here's the Mini Tire Changer: amzn.to/323VmFe

[@OU812NVME]

I want everyone to know all these guys that do these tires are great but remember if you have tread on your tires and you have a hole in it you can put a tube in it and get the rest of your life out of that tread tubes are really not that expensive just a suggestion

[@dougluoma6512]

You don't pull the tire plug through the tool, you just slip in on the tool and mid point of the plug. Good tire video!

[@AnyHouseCleaning]

Thank you so much for uploading this video. Thank you for your time

[@Cherokee10g]

Quick way to install the valve stem, soapy water and a pair of 12" channel locks, takes about 2 seconds, spray the valve stem with your soapy water put it through the valve hole, grip the valve stem with the channel locks, pull down using the rim's edge, its just that simple, this method used by automotive tire repairmen inside factory, same method was used also to remove the valve using a little more soap and a little more pressure on the channel locks, and no damage to the Valve Stem.........No bear just easy!

[@calvinhobbs89]

Very informative thanknu for your time an expertise

[@FreeAmericanSpirit]

Good vid my friend... By the way replace bearings too.. They are cheap and easy to do...

[@jeremyhix3115]

Good deal....everyone needs to know to do this...especially the plug...

[@HEROFOREVER]

Great video well explained

[@HappyHands.]

You don't have to cut the old valve stem out,, just use that stem puller screw it onto the old stem, place the handle of a screw driver under it on the rim edge and then with a prying motion push down and the old stem will pop right out. same with install the new stem , you dont have to use pliers or press in the new stem, just use the stem puller in the same way until the stem seats

[@ochoamoses3841]

Thanks for the video!!! No more pinched nerves on my knuckle lol does this work on split rims as well?

[@brucemacdonald4672]

Where did you get this tool to take off and put on the tire?

[@TheGokartGuy]

Wonder why the two notches on the aluminum centering spacer, doesn't seem to serve a purpose.

[@pupdog7374]

You have a value installing tool and you ended up using a pair of pliers.

[@michaelnunes5129]

Need to know how to remove wheel on Devilbiss 2600 pressure washer. There appears to be a small steel dowel securing wheel lug to axle. Small steel dowel is round with a round hole in center. I need to remove this small steel dowel. Allen wrench will not work on round hole. Peace.

[@TJsVette]

Would be nice if the tool that was used was named.....

[@AnyHouseCleaning]

Eccellent

[@denningmp37]

I have small tires that have tubes. How do you get the tube in without damaging it ?

[@davidseyler898]

Use the valve tool you bought.

[@routeaustralia7000]

How do we take the wheel off

[@manuelgomez5282]

What is the name of the tool