DOLLY HANDCART WHEEL PUSH NUT REMOVAL AND REPLACE
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- ALERT!!! SKIP TO 14:30 BECAUSE I AM STRUGGLING TRYING TO GET THIS PUSH NUT OFF!!! THIS IS NOT AN EASY PROJECT, IF YOU ARE NOT A PATIENT PERSON I DO NOT SUGGEST TRYING THIS.
AMAZON LINK FOR TIRE BELOW $28.14
www.amazon.com...
The struggle inspired me! I appreciate the realism of this video!
The WD-40 and a small crowbar did the trick for me. Thank you for showing me what to do and letting me know that it isn’t easy.
I’m sitting here, laughing at myself in frustrated camaraderie as I struggle with my own dolly. With your help and good humour, I managed to remove both of those axle nuts and am replacing the second tire now. I laughed out loud at “What in the haberdashery is going on here?” and while I have no idea what skippitypaps are, I now want some🤣.
Congrats!! Sometimes you just have to CRAM!!! hufem-hufem them nuts!!
The manufacturer should be ashamed of this engineering.
I appreciate your effort cause I went through a banging on the wheel nut with a pry bar and a hammer like it was a war world bomber and nothing so I decided to have expertise on the problem now I'm going to apply the technic thank you
I appreciate this video. The problem we are having is very simple: the axle is moving as well as he turns the channel lock. He needs to use another channel lock on the other side of the wheel to make sure the axke does not turn. Thank you very much for the effort.
Axel doesn't move at all. It's very primative.
Thank you very much because you gave me enough details to get this infernal push nut off my pressure washer. Who ever invented this is truly sadistic.
Thank you. 30-year old tubeless dolly wheels replaced with minimal effort. I only had a vice grip to pinch hold and turn the push nut. Your experience prompted me to give it a little extra persuasion with gentle use of a small wonder bar, to pry push nut while turning. It took about three minutes without WD40 (no mess). And like your result, no need to buy new push nuts. Again, thank you for the insight.
I just aimed to break the little stupid clip. Much faster that way.
The Wonder bar gets true results, the wonderbra is a fake illusion like a juicy worm on a hook snaggin suckers & nuts.🎣🤣
On mine, it was a super pain in the ass until I noticed the outer rim bending and what looked like a metal break. It was weird because I saw straight lines and I knew a break would most likely not have straight lines. I took a closer look and realized the lines were the separation for a tab. I was able to bend that specific area just enough to release the tab from digging into the axle. Doing the same for the other wheel was much better. Still tough but I made a lot more progress more quickly than I did in the first wheel. It was only after the top hat was off that I noticed some markings in the area where the tab was. Looked like a “W”.
@@JoelBarrett good job hope to never do this again!!!
Thanks to you I didn't have to buy new push nuts!! However, I used a pair of vice grips and pulled it right off! Thanks for saving me from drilling out the tabs.
I'm going to take your advice and use visegrips..... I did buy new nuts incase i Mangle them...
THANK YOU. Thank you for showing the real deal. I was feeling discouraged but your video gave me the push to get back out and try again. And this time it worked.
Yeah it is not easy as other videos make it out to be
I appreciate your efforts. It certainly informed me of what I’m in for.
Thank you I was successful in removing a push nut because I watched your video 😊
hopefully it was not as hard as I showed in my video but congrats!!
Attempted same operation myself yesterday, turning and turning and turning. Thing never budged. Realized later I was going about this entirely wrong, this morning I pulled out my Dremel and a cutter blade, and knocked out those tabs holding the nut on to the axle. Whole operation... including getting out the tools, safety glasses, and a pair of gloves (because those sparks will circle right around to your hand)... took about 5-10 minutes. Just be careful to which way the sparks fly, make sure your safety glasses are tight, use the gloves, and be careful how deep you go to not notch out the axle.
That dremel can be a lifesaver!!!
EXCELLENT VIDEO,,,, I love the reality of it.,..now I know what I'm up for.
Shoot, I appreciate the genuine video here. I really do.
Thanks man. I need to change wheels on my dolly too. Wasn't sure how to get that push nut off.
This was hella helpful bro thank you
Absolutely 💯 % you will able to be the president United States with this kind of patience.
Current one is merely a sleepy ignorant puppet.🤤 Love the gas and grocery prices. 💸💸💸
Thanks I'll tackle this on a cool day.
And if it's a.nice dolly you put a washer on and mark that spot and drill it so you can do a washer and cotter pin and NEVER have to deal with that again.
If you have a slide hammer that works the best.
14.42 Minutes to remove. I had a similar struggle. I tried like 5 different pliers, the one that helped to remove was the Oil Change vice grip, it has round jaws, the tips went underneath and I clamped and I tried one side first and then the other and it popped out, from the time I clamped it took 1m 67 s.
lucky you!!! I hope to never do this again!!
Omg I'm going through the same thing right now. I'm about to give up but you have me still trying
if dollies was cheaper I would have tossed mines!!
I admire your patience. ha
This commentary is hilarious!
these things are ruthless
This helped so much thx
Holy moly
I think they have a special tool for them also. To use that jimmy bar/crowbar/ flat nail puller tool would be good to use the L shaped end verses the straight end. Thanks for the big effort, pain in the @$$ to get off not lone to Fidel filming it also. Pull up as you turn also keep the axel from spinning also. Thanks again for your will to try & help others.
Maybe a flat tip screw driver under it to pry with as you using the channel locks
This poor guy don’t have a clue on what the hell he’s doing
That is so true!! but I did get the job done. would loved if you had a video up at the time to have shown me a better way!! because this SUCKED!!!
there is actually a tool to remove this. I have seen it. I just do not know what is called and where to buy it. It kinda looks like the tool to remove cork from a wine bottle, it has two flat little arms that goes under the cap.
Wish I had it when doing this video!!! thanks
@@geminidrums5530 Your video was genuine, you work hard, that impresses me. You made my day March 12, 2023. I am on your side.
I have just removed the serrated washer. However, one edge bent.Sooo, if I can’t get another washer, I will definitely drill a hole in the axle, and use a cotter pin. It was a bitch to remove the washer.
cotter pin,,,smart..thx
Use vicegrips instead of those dumb channel lock pliers. It'll be off in less than 30 seconds!
what was the size of that cap nut? thanks....
sorry, not sure of size it came with dolly
@@geminidrums5530 I special ordered one, they are hard to find, and it was a tick to big. Thanks for the reply...
@@markburnsworth3591 I hope itwas not that expensive and fit. I think this is the size of mines. 5/8th www.amazon.com/Push-Pushnut-Stud-Finish-2-Piece/dp/B079ZN8TRJ/ref=sr_1_5?crid=18Z6H6VM4M0F6&dchild=1&keywords=dolly+push+nut&qid=1617129740&sprefix=dolly+push%2Caps%2C407&sr=8-5
Is there a trick to save the nut as well?
no tips that I know of but Amazon have nuts at a cheap price or try home depot
I like how you pretended to take it off after 15 mins of wasting our time...
trust me that was not pretending it took me that long!! that is why I put in description to FF to avoid seeing me struggling. bottom line did it help No? if not sorry for wasting your time. just wanted to let people know this is not as simple as others make it out to look
Aren’t you just spinning the axle?
No I’m spinning the cap on axle.
OMG. Takes all day to get that off that ain't right
lol I. know people make it look so easy!! It was not!!
Definitely not German... not Chinese either.
Friggin thing is child proof, never give up
This is very bad design hand truck! You will break it before it fix. It looks way harder than replace a car tire.
Not worth my time and effort, just purchase a new Dolly. That rusty old thing will probably break in half the first time he uses it.
I agree!!! this is A lot of EFFORT!!!
This is possibly the worst video I have ever set through.
A - for effort. I would like to thank the man for showing us that it is possible to remove without a bunch of tools. Helped me understand how to do it also. In real time.