@@Factory928ACOh snap! Thats the same motor thats on my 2021. Great motor. With a few mods they are amazing! Let me know if you need some good head specs for it
Hiya man,,, I had a chain snap on me whilst high revs 1st gear,, she stalled straight away. But when I fitted a new chain ,,, I was gonna take her for a spin ,,, but I could a ticking in neutral, a first gear was noisy and 2nd wasn't. So shut her down ,,,, but I was definitely thinking gearbox. So I'm gonna dig in. Really thanks for sharing and videos are awesome and I truly thank you from Britain ❤. I have a 2015 450 KTM SXF so your videos have been brilliant for me and I'll back back ripping soon thx
Your welcome!. Did you find the video where I repaired the transmission on a 450SXF? When you open the motor to look for the damage I would also check the case real good around the sprocket area for cracks and stuff.
hey I was wondering if trying to start a bike with the exhaust plug in would do any damage bike backfired then took about 1-2 minutes to start afterwards and smoked for like 1 min then cleared up? thanks
The washer between the basket and the inner hub usually makes putting the clutch back on as a unit almost impossible as it will move or fall when the whole clutch is slide off the shaft.
@@SethMacgillivary Pre ignition is when the combustion happens before the spark plug fires, usually from too much heat or a hot spot in the combustion chamber. Detonation is when the combustion fires off from the spark plug but then the burn is on controlled and or the pressure causes another combustion off in the corner of the chamber and they collide. Both can sound the same and do about the same damage
Another great video!!! It's great seeing Beavis!!!
Thanks! 🐓
The profile pic is hilarious 😂
Good informative video
😂😂😂
Up all night because of beavis 😂😂😂😂
@@Factory928AC 😂
@@Factory928AC 🤣🤣🤣
Love the cameo by the chickens.
I’ve learned the most out of your videos. Changed the cylinder and piston plus chain on my FE250 with the help of you 😃
Thats awesome to hear! I appreciate you reaching out! 🤙
Love that rooster!
Beavis is one mean little guy, but we love um lol
Oh yes country folks, I have a lot of dirt bikes
@@stravis3269🤣🤣🤣
Another good video Chris 🤟🏽 record the hare scrambler race ! I wanna watch you rip the 125😮💨😮💨 I just picked up a unicorn 05 🤷🏽♂️
Thanks. I did find a chest mount. Gonna test it out today and try to record the race on sunday.. You picked up a 2005? YZ?
@@UpAllNight91 yessss a 125🤟🏽
@@Factory928ACOh snap! Thats the same motor thats on my 2021. Great motor. With a few mods they are amazing! Let me know if you need some good head specs for it
Hiya man,,, I had a chain snap on me whilst high revs 1st gear,, she stalled straight away. But when I fitted a new chain ,,, I was gonna take her for a spin ,,, but I could a ticking in neutral, a first gear was noisy and 2nd wasn't. So shut her down ,,,, but I was definitely thinking gearbox. So I'm gonna dig in.
Really thanks for sharing and videos are awesome and I truly thank you from Britain ❤.
I have a 2015 450 KTM SXF so your videos have been brilliant for me and I'll back back ripping soon thx
Your welcome!.
Did you find the video where I repaired the transmission on a 450SXF?
When you open the motor to look for the damage I would also check the case real good around the sprocket area for cracks and stuff.
This would have also been a good time to replace the clutch hub rubber dampers.
Yes sir, sure would. These on this bike where actually nice and tight feeling which was surprising because I usually find them all slap loose lol.
Beavis is the real deal😂
😂😂😂
Fun fact my name is travis it rymes with beavis. Just missing butt-head. Lol
😁 We have a Butthead here, the big white chicken lol
2013 seems to be all different part numbers FYI. The parts you have mostly started in 2015.
Thats probably correct. They changed the starter clutch and stuff but I think the puller is the same.
hey I was wondering if trying to start a bike with the exhaust plug in would do any damage bike backfired then took about 1-2 minutes to start afterwards and smoked for like 1 min then cleared up? thanks
It shouldn't hurt anything. I have done it a few times when I have forgotten and its been ok. Hopefully yours is.
Out of curiosity, if you can remove the entire clutch fully assembled, why can’t you put it back on fully assembled?
The washer between the basket and the inner hub usually makes putting the clutch back on as a unit almost impossible as it will move or fall when the whole clutch is slide off the shaft.
Beavis is boyo 😂😅😂❤
🤣🤣🤣
What's the torque on the freewheel gear
The bolt that holds the flywheel on is 44 foot pounds.
Where did you get the tool?
I got my for RM but they I'm not finding it there right now. Heres one on motosport www.motosport.com/oem-parts/part-number/75029021000
Will detonation start on the top of the piston or the side above ring
I usually find it starts its damage on the top of the piston near the edge.
@@UpAllNight91 what’s pre ignition Vrs detonation
@@SethMacgillivary Pre ignition is when the combustion happens before the spark plug fires, usually from too much heat or a hot spot in the combustion chamber. Detonation is when the combustion fires off from the spark plug but then the burn is on controlled and or the pressure causes another combustion off in the corner of the chamber and they collide. Both can sound the same and do about the same damage
Why no assembly lube?
I honestly don't know. I will peek around it tomorrow and see if it has a hour meter on it
Love the videos he is the best. This guy id invite to my camp fire and ride trails all day
@@stravis3269 Well that sounds like a good time!
Assembly lube is not really needed here. It doesn't hurt anything but not really needed
Well I wasn't able to find a hour meter on this bike unfortunately
🏜👍