New Project! Freakish Streetrace Car!
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- If you want to support the project, buy merch from: www.busbil.com
My instagram:
/ peterbjorck
My second youtube channel (Swedish):
/ busbil
If you want to support me to do more videos:
www.buymeacoffee.com/peterbjorck
My Facebook page for my cars:
/ bjorcksbusbil
My company: www.bjprace.com
Call it Agnetha. It was big in the 70’s.
I like that 😂, probably a bit too cheesy, though
Particularly 1976!
Frida is also an option, of course 🙂
Eva🥵
Beatrice
Paint it in a nice red color and call her Pippi. Its very swedish. Nobody mess with pippi. And you can put Hr. Nilsson in the back window, to continue your style with a dog in the back of Volvoghini.
This is why you're my favourite builder ever, a mid-mounted Audi/Lambo V10 powered Volvo, with R8/Huracan rear subframe, DCT, and twin turbo some more! This is absolutely epic!
Love to see the inspection guys face when he sees it again… 😮
Peter Bjorck, you're an absolute madman. I've been following your content since the LHD swap on your ex supra. I assume that I was around 10years old back then and you're one of the reasons why I had to learn English language to find everything done to that beast. It was around the same time my dad bought his USDM Supra and imported it to Finland. Your content has always been interesting and this Volvo is going to the next level. Good luck with your project, greets from Finland!
This is going to be a unique project for sure! The only serious mid-engine car I know of on TH-cam is Kyle from Boosted Boiz. He has a 1400hp+Toyota MR2 with a billet block Honda K-series that runs high 7 seconds in the quarter mile. He's had to do a lot of work to keep the car from doing massive wheelies.
I believe he did a cantilevered suspension, too...
AWD should negate a bit of that
I believe kyle is just running weight up front and a height sensor to cut power if the front end gets too high
That's the only high HP mid engined car you know of?
@@1one3_Racing I worded that poorly. I know there are a ton of mid-engine exotics out there, but I was trying to think of fully caged mid-engine car on the smaller side to better match up with the Volvo's dimensions.
Riktigt häftigt bygge. Blir väldigt kul att följa detta 😊
Alltid lika imponerande 🏆🇸🇪 Är väldigt imponerande du kan så mycket. Du verkar fått tillbaka din energi igen med 🙏
I am just starting a build for street week. Not 2024 but more like 2026 😅
I am also going for a tube chassis car, but sadly not with a V10, but a Volvo T5. And a glasfiber Tjorven body.
Please document the SFRO process in the videos too! This part is extra hard for me since I’m not Swedish (I live in sweden tho).
Tjorven t5a vill jag se! 😁
Videos like these make me wonder how people afford their builds. This is exactly up my alley
Looking forward to this build mate really like your work/style
Looking forward to seeing it all come together.
You sir, are an absolute madman, just when I think all the Volvo builds have been done, you drop this epic project! Will enjoy watching this one take shape, top notch work as always, been here since the 2j 245!
Cool project,, 👍😎👍
Thank you ever so much for sharing Peter,, ❤🙏❤
Call it Greta on speed. Great to see you with a new build.
I love these builds, nothing ordinary about them.
That subframe is an amazing bit of kit!
Monster build, this is gonna be cool
Damn, that Volvo is literally my dream car. I will own one some day.
I was sad when you sold the gallardo 5.0 v10... now I can forgive you 😆
I start my 5.2 V10 project next year similar to yours. Keep up the good work 👍
I have a feeling World Cup Finals has something to do with this :D Looking forward to this project!
Awwww, man! You should have found a 262 for this project! Those already had the awesome chopped roof.
Rear engine drag car... look up "Hemi Under Glass"
Fantastic project, looks cool with the spot lights.
i thought that too, maybe he should take a frontal photo of it and then print a sticker for the front of the drag car when he is done ;D
Thanks for the video. Looks like fun. Glad the algorithm recommended this video for me.
Love your new Projekt ❤ it is the faster sister of the Volvoghini 😂 call her Meja
Great idea, Peter. I really enjoy your work and channel. Keep it up.
All hail the algorithm.
Big thumbs from Finland! This is going to be awesome project!
Kom igen nu Britt-Marie kör föfaa-aaann! ;)
Fast då måste du ju spara Gula Blend lacken om den ska heta Britt-Marie :)
Wow, this is amazing. Thank you for being you. I cant wait to see how it goes. Good luck getting to street week.
Haha sjukaste! Och körbar i sommar 😅 Är det nån som löser det så är det du!
Bästa svenska kanalen förövrigt. 🙌🏻
Yes!! Really cool plans and very unique style, i like it alot!
Love the Idea, especially that you are using a volvo again!
Birghini and Astrighini came to my mind haha :D
Love everything you do, call it the Volcan.
04:20 - you say correctly what you saw. it has a limiter. also it's not working..LOL That weather outside looks dreamy.. from a far Warm place.. Congrats PeterB
FYFAN va kul !!!!
kul o följa bygget o kul att se dig på sw i sommar!
The 240 Looks way to clean, i Wish i could have one like this
"hopefully get this on the road this year"
literally some parts on a pallet😂
I'm guessing you cut up your R8 and its the donor for this project 🤔. Really looking forward this build series 😎
Such a madman!
ALWAYS love watching your projects progress!
I remember seeing pictures in a hot a road/Craft Craft of the Swedish street car scene in the 80s/90s
Hot rodding is spoken in every language/country!
Call it : KingDa Ka!
It's the most awesome/scariest rollercoaster from Six Flags.
Ou jes!!🎉 More badass volvo,ish. Cannot wait for update, thank you so mutch.
Awesome... looking forward to watching this build!
My dad had samekind volvo when i was young boy :) It had leather seats and 2.1L injected gasoline engine :)
Great concept Peter! I'm using a Gen 1 R8 drivetrain in my build (from 2012 V10 car), also full tube chassis and awd. Twin turbos as well however much less power than what you're planning. I'm focused more on road racing vs drag - it's irs with inboard coilovers. Guessing you'll be driving yours long before I finish mine, so I'm really looking forward to seeing your build as it progresses!
Ohh sounds like a cool project!
Been following @grandpafabio maybe two years and that is for sure one wild build that should have so many more followers as its great inspiration that just about anything can be built in a small garage. And he dont post new clips that often so it wont keep anyone away from their own builds 😊
Its great to see you do all the work. Please do more long videos like this so we can learn from you. Not only final product. Happy new year 🎉
Call it "Bender" After the robot in Futurama. You will have a lot of bent pipes in this car. And that's what bender does. Bends tings.
Good luck, have fun!
Gleder meg til å se den ferdig!!! Kall den Ingrid. Høres bra ut på engelsk. Og det var navet på min bestemor😊
You've lost your mind Peter, I love it! I'd love to buy a 240 for a project. Can't wait to see what you do!
This would be cool in the Volvo 480 body.
Good Luck with the project !!
I heard Britt-Marie in my head just before you said it. I thought of “kör Britt-Marie kör!”
Can’t wait to see this one Peter looking like a great plan how much BHP are you aiming for?
Whooaa! That is really a build, not just popping a different engine in something (although I absolutely love the Volvoghini.)
ah yeaaaaaaaah!! love it already - call it THE GRANDMOTHER
You are an artist, sir! Always love watching your builds. You make me wish I could visit Sweden.
Just the right level of insanity, love it!
aight this is going to be cool project, u sound really happy about it too so its good! cant wait for updates :D
Super excited for the new project! Hopping you’re planning on doing some shirts for it, so it can match my Volvoghini shirt
Ulla Britta)
Like your videos so much!
The Steet Killer Ovlov, love it. going to be a beast
Looking forward to seeing this build 😀
I just found you're channel today and whhhaaaooo ! You do a crazy job !
Big up from France and you got a new sub !!
Awesome! This will be a great build series. 👍
Estelle, Princess of Speed
😅 Kul med nytt projekt! Ser fram emot fler videos.
Mad Kitten would sound crazy :D
Now this is going to be awesome!👍
Always the best content.
My favorite youtube channel 🔥
So it's like the Volvoghini only even more evil? I'm in !
So creative, nice work 👏
This is gonna be awesome build. once again.
Have always dipped in & out of ur channel & came across this today. Bei g a Volvo lover this project put massive smile on my face so have subbed 2 follow, looking forward to watching this grow. Thanks frm the UK 😎👊👍👌✌
Lot of K-series MR2s do crazy times drag racing 😎👊👍👌✌
Going to be an amazing build, please do loads of videos when doing the chassis pretty please
Stenhårt! Ser verkligen fram mot kommande avsnitt 💪🏻😊
Britt-Marie låter fantastiskt
”Kom igen nu Britt-Marie, Kör för fa-an!”
Grettas revenge!
Looking forward to following this project.. I actually thought you were joking until you started butchering the lovely old 240 😂
Hilsen fra grannlandet.
Blir intressant att följa! 👌
Man slänger sig över dina videor så fort man ser att du släppt en ny. :P Tror det kommer bli ett intressant bygge. :) Väntar på update redan. :D
Sjukt ballt bygge! Ska bli kul o följa :D
jävla häftigt bygge det kommer bli... har fortfarande minnen från din supra och såg dig ett par gånger ute vid skroten i Örebro när du körde va många år sen dock =)
How cool this will be, can't wait for next episodes.
We accept the offering.
Absolute madman !
Flitiga Lisa Mimmi Mus 😅 vilket jäkla fränt bygge ❤
I think you should try use full R8/Huracan front suspension to keep the parts easier, sharing same bolt pattern for wheels & so on.
“Easier” isn’t in Peter’s vocabulary :)
@@funkytransport Haha, that's true. If he want easy, he wouldn't do this project.
Kul projekt. Kämpa på nu 👍💪
riktigt häftigt bygge, blir kul o följa!
Fan va kul, stort lycka till Peter!
So that’s what’s left of the R8? Cool project, going to be following it for sure!
quatrovini trevligt .. ser fram mot fortsättningen.. den kan bara bli grym!!!
That laugh at the end means only one thing :D This will be awesome car :D
Keep it Beige with brown interior and call it "Wurthers Original" ....sweets for old folk in UK🤣
Grymt kommer bli kul att följa detta , lycka till🎉
Fyfan va coolt! Gamla Bettan ska den ju heta såklart! :D
Oh this will be fun!
Raket-Gudrun 🤩
Wow...I wasn't expecting such a big project coming! The question is, is still the R8 all toghether? That rear red frame make me scratch my head 😅
Eurofighter or something related to aviation I think would be cool
I will enjoy this build
I was thinking the same, it become a parts donor as it couldn’t be made legal - a lot of strange things go on with cars in the UAE
Yeah aswell as he said the turbokit and gearbox came from the r8😅
Well, he can't register a stolen car, so we're all guessing he's simply parting it out to attach as much as possible from that financial disaster to a legal VIN.
Låter ju som ett underbart bygge. Krya på dig också 👍
Damn you got more building talent in your pinky than whatever i got. So this will be fun to follow.
For a name maybee call her Åbertha?
Spännande! Detta ser vi fram emot. Kör hårt!