Panasonic LUMIX S1 RIG

In this video, I show you my Panasonic Lumix S1 Rig.
I tear it down and build it up from scratch and explain what each component is used for and why I use it for my rig.
This rig can be used for any camera and cage combo.
Camera: geni.us/LumixS1
Cage: geni.us/F8qiz
Rapid connectors: geni.us/NqRW3
Side handle: geni.us/ONLJBj
Top handle: geni.us/NstCC
Wrist strap: geni.us/w0zbk
Base plate: geni.us/g5Khqqg
Arca Swiss quick release plate: geni.us/9QgGX7O
Carbon Rods: geni.us/SkCapq9
Rod Clamps: geni.us/Yvg1xA
Cold shoe mount: geni.us/gMxSA
Monitor Mount: geni.us/9IebdFI
Monitor: geni.us/ehzc8
Camera bag video: • Best Mirrorless Camera...
THIS IS NOT A SPONSORED VIDEO.
Other Technology videos by me: bit.ly/BallyTEK
Join me on my Facebook group to discuss this or any other videos or video ideas you would like to see here: bit.ly/BallysRealm_FB
Comment below what you thought or if you have any other tips for Camera Rigs
=============================
Channel Support
=============================
If you wish to support the channel monetarily, you can use my PayPal directly here: paypal.me/BallysRealm
This is highly appreciated, but not a necessity.
=============================
The music I use in my videos (Free trial): bit.ly/2Xw0iCy
=============================
Current equipment that I use:
=============================
View the full kit at: kit.co/BallysRealm
=============================
My camera rig:
=============================
My Camera: - geni.us/LumixS1
Camera cage: geni.us/F8qiz
Top handle: geni.us/NstCC
Side handle: geni.us/ONLJBj
My wireless mic: geni.us/gICv
My on-camera microphone: geni.us/3hbz5FP
My variable ND filter: geni.us/if2x
My camera gimbal: geni.us/StoBab
My camera bag: geni.us/6tqU
My memory card: geni.us/8Ovd9S
My 5” Video Monitor: geni.us/ehzc8
Monitor mount: geni.us/9IebdFI
My Studio Light: geni.us/n6wsEkR
My LED light: geni.us/eJ0L
My RGB LED Light: geni.us/GXZrA
My Flash: geni.us/FDLPT7D
My tripod: geni.us/RdwOh
My Monopod: geni.us/DL5QSh
My mini Tripod: geni.us/cZHQvt8
My fluid video head: geni.us/sfHD
My flexible Tripod: geni.us/vjwq
My Pocket Gimbal: geni.us/wN3w5
Extension rod for Pocket Gimbal: geni.us/Y13xe59
My Phone: geni.us/eWT5
Mobile phone mount: geni.us/fZMMnb
My smartphone gimbal: geni.us/9kJ3
Some of the links in my video descriptions are affiliate links, which means at no extra cost to you, I will make a small commission if you click them and make a qualifying purchase.
#Panasonic #Lumix #S1#Rig
#BallyTEK

[@BallysRealm]

Camera: geni.us/LumixS1
Cage: geni.us/F8qiz
Rapid connectors: geni.us/NqRW3
Side handle: geni.us/ONLJBj
Top handle: geni.us/NstCC
Wrist strap: geni.us/w0zbk
Base plate: geni.us/g5Khqqg
Arca Swiss quick release plate: geni.us/9QgGX7O
Carbon Rods: geni.us/SkCapq9
Rod Clamps: geni.us/Yvg1xA
Cold shoe mount: geni.us/gMxSA
Monitor Mount: geni.us/9IebdFI
Monitor: geni.us/ehzc8
Camera bag video: th-cam.com/video/71i5z3qJmxE/w-d-xo.html
THIS IS NOT A SPONSORED VIDEO.

[@cloud84strife]

It's cool where you put the monitor but sometimes got cover with the arm in that place.

[@igottheshaft]

VERY clear explanatory video. You were excellent! Thank you.

[@BallysRealm]

Glad it was helpful!

[@josephasghar]

Oh that’s sooooo clever. I’m nicking those ideas.

[@BallysRealm]

Thank you - Feel free to use anything you need!

[@Sharmajicamerawale]

Can I balance my s1 + sigma 24-70 2.8 on weebill s??

[@BallysRealm]

Possibly. You will need to play around with it and may need to use counterweights to have the full thing balanced.
You can see my balancing video here: th-cam.com/video/myNzJ8A28bg/w-d-xo.html

[@puma3100]

I have the same setup the problem is after few days of use the screw attached to the camera tripod screw loosen up. how do you fix that? do you have the similar issue?

[@BallysRealm]

Hi, If you are referring to the arca swiss plate on the bottom of the cage then i have 2 scews fully tightened so that doesnt move.
If you are referring to the screw that holds the arca swiss quick release adapter onto the base plate, then it does become loose on mine some times, but I make sure that I tighten it as much as possible with a screw driver. It will last a month or 2 that way for me.

[@puma3100]

@@BallysRealm Thanks. Actually the tripod mount on the lumix S1 was broken when it is fully tight and attach to small rig. after heavy use it will break the tripod mount. Thanks for again for your response for sharing this very informative video!!

[@BallysRealm]

@@puma3100 You're welcome. Glad you enjoyed it!