I have 2 Mobula 7's. My first Mobula turned into an experiment and added the 200mw vtx upgrade , Frame to V3 upgrade, Threw away the canopy , Added a Caddx Turtle V2 mounted with soft black packaging spunge and rubber bands. Weight is key! Stil doing re-tuning on the pids but I must say the video quality on the caddx is amazing and after first tuning session I'm getting some decent stable footage. Hd 60 fps. Had to adjust to the slightly higher throttle constant due to the increase in weight, But those little motors impressed me. Stock 16000 kvs. Cool vid!.
got lucky and thank you for walking through betaflight. I have the same FC in a scratch build and couldnt get the video smart audio set up and happened to see the setting I needed as you passed by the ports page. Total noob, so I was doing it wrong
This is a great little quad. I love this little guy for flying in front of my cul de sac and backyard. Of course indoors is also great but since I don't have as much room indoors, I just fly it outdoors. The control is spot on. I bought 3 of these to mess with, modify with no intention of expecting to much but, the Mobula 7 has become one of my favorite 75mm quads that is not of my own design. Lately, I fly one that has my own frame and although it is a bit heavier, it is much more predictable, stable and lots of power with the 803 upgrade white motors. Since the stock Mobula 7 quad is awesome, out of the box, I decided to put emphasis on the video tranmission and thus have been experimenting with my own Penny antennas, surprisingly giving me better video than the antennas that come typical with FPV goggles. Unfortunately, I lost one of these Mobula 7s a week ago while returning from the park, forgot to relocated it to my car seat, but had left it on the roof, well .. it fell and got runned over by a car. When I return to find it, it was surprisingly almost intact, except the FC had a couple hairline fractures and this killed it. The connectors to the motors were pretty intact, go figure!, but the motors base tabs were all bent, althought the motors still work. How about that for a quad that got runned over by a car!. One of the Mobula 7's I got, out of the box, had a camera that separeted from the CMOS sensor board, and oversight on QC, the adhessive was not well spread out at the factory and so that was the only issue I had with 1 out of three. I decided to repair it myself rather than return it to the place I bought it from. But maybe Happy Model can take note of this, if you are reading this, simply make sure that your people are a bit more careful with the gluing of the camera to the CMOS board, so it does not come loose in flight. I printed my own version TPU adapter and a few other goodies, check out my channel for all the stuff I've done with the Mobula 7, DIY upgrades, frames, antennas, and a few other goodies. Now, I am looking to get a KingKong ET125 V2 quad (which has caught y attetnion for several reasons), one, so I can mount the Caddx Turtle V2 Cam/DVX, which I think is more practical than mounting that camera combo on the Mobula 7 or similar size quads. To Happy Model: Perhaps looking forward to a Mobula 125??? or even even a Mobula Super Jumbo. like the KingKong latest and greatest??? Something for Happy Model to think about. Thanks and Great video!
Thanks for the video! I picked up a mobula7 and it was having issues out the gate but i reflashed it and put your tune on it and it flies sooo good now. Having a blast now, thanks again.
Great video, Justin. Thank you. I’ve got both V1 of the Mobula7 and the trashcan and I’ve got to tell you that I really prefer the Mobula7. It just feels “lighter” and a little more nimble than the Trashcan to me. The comparison that comes to mind is a sports car vs. V8 pickup truck. That’s just my personal taste, I realize; other people’s mileage may vary. Thanks again for all the stuff you do for us guys out here. Peace. “Fish”
Thank you for your video. I am a beginner and have trouble following your PID recommendations since my Betaflight is 4.0 and things have changed quite a lot. Any update possible for that BF version?
Would scaling down the throtle signal (so the maximum stick deflection is not the maximum throttle value) with a 2s battery allow for it to have the characteristics of flying on an 1s but with longer fight time?
Awsome video! You let me set the quad perfectly for my first outdoor 2s fly. Just went from the simulator and few fly indoor in 1s, but with those settings all was like the sim. I did my first roll also!! Thanks for solve the no-zero-throttle issues that i had flying in air mode. The first attempt to fly in 2s was impossible because the motor wont slow down. Anyway.... Really really really thanks you let me save lots of time
Please I need to set the angel mode so my brother can fly, why you set the range 900 - 1100 also in PID what is the best transition and strength value. 👍🏻👍🏻👍🏻
Would it be a good idea starting on one of these before building a 5” racer. I’m worried investing a lot in a 5” only to crash and destroy it. These seem like a cheap gateway to start on
definitely start here! you wont regret it. I actually enjoy flying these micros more than the 5" now. You can fly indoors, learn basic control, and repairs as fast, simple and most of all cheap.
Colin MacKenzie, III couldn’t be more right had my mobula 7 for a month now. Absolutely love it it’s Made me learn FPV and get really comfortable with acro and ripping around
Do you know if Profile (not profile rate) 1 is for 1S and Profile 2 is for 2S? Or visa versa? The stock PIDS are different between the two. You edited the PIDs on Profile 1. I don’t know if that was intentional or if you don’t care about overriding the 1S PID because you plan to fly this exclusively outdoors.
Hello again sir . Sorry for the question I’m new to this . Im trying to buy the mobula7 and is asking me witch receiver frsky EU-LBT or frsky Non-EU . My QX-7 is for D-16 . Witch one should I buy ? Please reply . Your my best source. Thanks
I tried the V2 frame and those ended up breaking even more easily than the original version. On one crash, all I did was ping the chain on a swingset at moderate speed and the duct broke in two spots, completely separating a section of it from the rest of the frame. I hate glue, so instead of repairing them, I ended up going through three V1 frames and two V2 since they're so cheap. Today, I finally installed my first Trashcan/V3 frame, and hopefully the thicker ducts and supports do their job this time.
Which 200mW? Which upgraded esc? Where this info come from? Only difference between V1 and V2 is frame. That's it. It's great quad, and I'm agreed it's best one to buy. I had both V1 and V2. My V1 had unbalanced props and it vibrates a little on low speed. V2 props was a little better, but I run TBS 3 blades props, and it's a little better.
How do you get these to fly on 1S? I have used the bypass connector in one of the battery connector sockets but the quad just doesn't seem to recognise the other battery on its own, so basically I can only fly with two batteries plugged in.
Thanks for the review! You completely sold me on this bad boy! This will be my first drone with over 150 sim hours so far, ready to finally graduate. My one confusion is that the gearbest website says the Basic version is $83 on sale and is pictured with the 6 in 1 charger however, the Standard version is pictured without the charger for $107. Am I missing something?
I just bought two Mobula 7 whoops as they are on sale at gearbest, I paid £59 each for the standard Frsky version, and I got two of them as it's cheaper for spares at the price I got them for.
Standard is the one with the 6 way charger. Get the standard so ur not stuck charging one bat at a time. Basic comes with single USB charger. Standard is the one to get. Just an fyi.
Hey Justin, Went to Order Just Now, and it Doesn't say V2 Anymore.?.?.?.? If they're out, I would rather wait for the V2 like you just did This review on. Your link sends you there but the V2 version I put in my cart said V2. Now it just says Mobula 7 without the V2. The specs say 120 camera FOV.?.? Your V2 had 160 FOV I Believe. They have about three listed I believe but it looks like standard, basic, and The HD version. If you have time to read this could you please let me know if they have sold out of the V2?? I don't mind waiting. I don't want to buy the first one. Thank You Justin!!!
what does blheli report your old escs as? are they both "S-H-50"? this is what mine are reported as and I definitely have a v2 frame but I wasn't aware of an esc update primarily as I've only just received mine at the start of January. I received black props though
I have the tinyhawk S but with 2s the flight time is almost nothing and the motors and battery almost burn my hand with only one flight! With 1s is very good but if i use outdoor the wind blows and is very dificult to fly! What do you think ? Worth for me buy this mobula 7 ?
I was surprised when i bought i think is v1 but it came a smoke black v2 frame and when i looked at recent pics Reviews on banggood and like me the Mobula 7 boxes were opened and tapes back together i think at the factory to replace frame from v1's
Thanks for this great video, I am confused about channel mapping, I have the M7V2 and the manual states that the channel map is TAER1234 but in betflight (as you show) FRSKY is shown in the receiver tab as AERT1234. Do I ignore the manual please?
I worked it out, dialled betaflight back to 10.4.0 set up RMTX16s ar AETR, used TAER1234 in betaflight then changed the inputs to match. works a treat.
You linked to Gearbest to get this new version. Do they actually have stock? I have ordered a Beta75X from them 1st of january, paid, still hasn't shipped early februari. They suggested to select something different instead, I went for the Diatone R349, but guess what... they have no stock for that either, even though the website keeps saying it ships within a few days. But that ship between date just gets pushed into the future...
just lost mine, cause it was flying way too fast out of sight ^^ what a pity that the batteries got lost when falling down, so i ordered eight away a new one :-/
Hey there Thx great review . Im new to fpv and have never flown with goggles , in your video when flying with goggles is that exactly what you see in the goggles or is it clearer ?
Analog is all VHS cassette tape quality. Even HD. The HD is the recording but not what you actually see in the goggles. For quality while flying, you need digital like the DJI setup.
GREAT JOB JUSTIN!!!!!!!!!!!!!!!!!!!!!!!!! WOW!!! YOUR FLYING HAS IMPROVED AN THAT'S JUST FLYING A WHOOP!!!! A+++++++++++++++++++++ ON THE REVIEW, AND FLYING!!!! ALL THE WAY MAN!!!!!!!!!!!!!!!! QUESTION?.?.?.?.?.?.?. TRASHCAN, OR MOBULA 7, V2..?? I TRUST YOUR OPINION!!! PS....... THAT MUSIC ROCKED!!!!!!!!!!!!!!!!!! MY MAN!!!!!!!!!!!!! #KEEPUPTHEGOODWORK
John Jenkins mobula7 v2, its just got that agility that trashcan doesn’t, yes trashcan has bigger motors but that comprises the battery. Deffo get the Mobula7 v2, and buy LOTS of batteries, you’ll love it
@@explosivefruits Thanks man!! I Just Now went to order the "V2" and it (Does NOT Say V2 Anymore)?!?! If they ran out I will Just Wait, but I've been through this before, and there is No Returning ANYTHING to China from the US. I Don't want it unless it's the V2!! PLEASE let me know if you noticed the same thing using the LINK from THIS video whenever you have the time. I would really appreciate it Man. THANK YOU FOR YOUR HELP!!!! The camera says 120 FOV Not 160 FOV Like Justin Described with the V2.
@@late2thegatefpvdfreeman319 What all is different in the V2 Mobula 7? I bought the first version but also purchased the V3 frame and some extra batteries. You're saying they possibly send out the originals with the V2 frame now? That would be excellent.
No you don't, you will have to bind it to either a frsky, flysky or DSM2/DSMX transmitter. If you don't have a transmitter like that, go get one, you will need it later anyways. (:
Mobula7 HD is the one with the upgraded VTX and ESC also 3s the only good frame for the mobula is version 3 the rest are junk they're only couple of bucks to buy
@@dronecamps is that just because of the PID settings from factory or the slower loop frequency or who knows but it doesn't matter cause it just flys great? lol sorry just wondering
I have 2 Mobula 7's. My first Mobula turned into an experiment and added the 200mw vtx upgrade , Frame to V3 upgrade, Threw away the canopy , Added a Caddx Turtle V2 mounted with soft black packaging spunge and rubber bands. Weight is key! Stil doing re-tuning on the pids but I must say the video quality on the caddx is amazing and after first tuning session I'm getting some decent stable footage. Hd 60 fps. Had to adjust to the slightly higher throttle constant due to the increase in weight, But those little motors impressed me. Stock 16000 kvs. Cool vid!.
got lucky and thank you for walking through betaflight. I have the same FC in a scratch build and couldnt get the video smart audio set up and happened to see the setting I needed as you passed by the ports page. Total noob, so I was doing it wrong
Thanks for adding that last bit of the betaflight overview. Helps a lot for us newbs.
This is a great little quad. I love this little guy for flying in front of my cul de sac and backyard. Of course indoors is also great but since I don't have as much room indoors, I just fly it outdoors. The control is spot on. I bought 3 of these to mess with, modify with no intention of expecting to much but, the Mobula 7 has become one of my favorite 75mm quads that is not of my own design. Lately, I fly one that has my own frame and although it is a bit heavier, it is much more predictable, stable and lots of power with the 803 upgrade white motors.
Since the stock Mobula 7 quad is awesome, out of the box, I decided to put emphasis on the video tranmission and thus have been experimenting with my own Penny antennas, surprisingly giving me better video than the antennas that come typical with FPV goggles.
Unfortunately, I lost one of these Mobula 7s a week ago while returning from the park, forgot to relocated it to my car seat, but had left it on the roof, well .. it fell and got runned over by a car. When I return to find it, it was surprisingly almost intact, except the FC had a couple hairline fractures and this killed it. The connectors to the motors were pretty intact, go figure!, but the motors base tabs were all bent, althought the motors still work. How about that for a quad that got runned over by a car!.
One of the Mobula 7's I got, out of the box, had a camera that separeted from the CMOS sensor board, and oversight on QC, the adhessive was not well spread out at the factory and so that was the only issue I had with 1 out of three. I decided to repair it myself rather than return it to the place I bought it from. But maybe Happy Model can take note of this, if you are reading this, simply make sure that your people are a bit more careful with the gluing of the camera to the CMOS board, so it does not come loose in flight.
I printed my own version TPU adapter and a few other goodies, check out my channel for all the stuff I've done with the Mobula 7, DIY upgrades, frames, antennas, and a few other goodies.
Now, I am looking to get a KingKong ET125 V2 quad (which has caught y attetnion for several reasons), one, so I can mount the Caddx Turtle V2 Cam/DVX, which I think is more practical than mounting that camera combo on the Mobula 7 or similar size quads.
To Happy Model: Perhaps looking forward to a Mobula 125??? or even even a Mobula Super Jumbo. like the KingKong latest and greatest??? Something for Happy Model to think about. Thanks and Great video!
Just ordered one and 5 batteries! Due to your vid on beta flight, made this an easy buy for me! Thank you Justin!
Have you had any problems with it?
Thanks for the video! I picked up a mobula7 and it was having issues out the gate but i reflashed it and put your tune on it and it flies sooo good now. Having a blast now, thanks again.
You're welcome :)
Was this tune on PIDs on profile 1 or 2?
another awesome video. oh and o forgot to congratulate you on the 100000 award!
Great video, Justin. Thank you. I’ve got both V1 of the Mobula7 and the trashcan and I’ve got to tell you that I really prefer the Mobula7. It just feels “lighter” and a little more nimble than the Trashcan to me. The comparison that comes to mind is a sports car vs. V8 pickup truck. That’s just my personal taste, I realize; other people’s mileage may vary. Thanks again for all the stuff you do for us guys out here. Peace. “Fish”
the v1 flies the best on the v2 frame, but im intrested to see how the v1 flies with the trashcan motors on the v2 frame.
Same here. There is something with trashcan that i don't like, i can't put my finger on it but i prefer mobula7 every time
Thank you for your video. I am a beginner and have trouble following your PID recommendations since my Betaflight is 4.0 and things have changed quite a lot. Any update possible for that BF version?
Would scaling down the throtle signal (so the maximum stick deflection is not the maximum throttle value) with a 2s battery allow for it to have the characteristics of flying on an 1s but with longer fight time?
Awsome video! You let me set the quad perfectly for my first outdoor 2s fly. Just went from the simulator and few fly indoor in 1s, but with those settings all was like the sim. I did my first roll also!! Thanks for solve the no-zero-throttle issues that i had flying in air mode. The first attempt to fly in 2s was impossible because the motor wont slow down. Anyway.... Really really really thanks you let me save lots of time
You’re welcome!
Did you turn airmode off?
@@AllAroundTube50 nope, now airmode is on in everymode i fly (with the check in the first page of betaflight).
And switch off the zero throttle button
Please I need to set the angel mode so my brother can fly, why you set the range 900 - 1100 also in PID what is the best transition and strength value. 👍🏻👍🏻👍🏻
Would it be a good idea starting on one of these before building a 5” racer. I’m worried investing a lot in a 5” only to crash and destroy it. These seem like a cheap gateway to start on
Yes start here for sure.
Just found the trashcan which do you prefer?
definitely start here! you wont regret it. I actually enjoy flying these micros more than the 5" now. You can fly indoors, learn basic control, and repairs as fast, simple and most of all cheap.
Colin MacKenzie, III couldn’t be more right had my mobula 7 for a month now. Absolutely love it it’s Made me learn FPV and get really comfortable with acro and ripping around
for sure. these little things are really fun and stress free.
Definitely going to pick one up payday 😎👍
Thank yo so much. Just ordered a Mobula7. Your video will be a huge help
Thanks for all our honest reviews. It helps me with what I would buy next.
The discord is lots of fun! Definitely recommend joining it :)
Do you know if Profile (not profile rate) 1 is for 1S and Profile 2 is for 2S? Or visa versa? The stock PIDS are different between the two.
You edited the PIDs on Profile 1. I don’t know if that was intentional or if you don’t care about overriding the 1S PID because you plan to fly this exclusively outdoors.
Hello again sir . Sorry for the question I’m new to this . Im trying to buy the mobula7 and is asking me witch receiver frsky EU-LBT or frsky Non-EU . My QX-7 is for D-16 . Witch one should I buy ? Please reply . Your my best source. Thanks
So stoked! Mine showed up yesterday... Cheers
My main problem with whoops is the oscillations you get when throttling out of a dive
I tried the V2 frame and those ended up breaking even more easily than the original version. On one crash, all I did was ping the chain on a swingset at moderate speed and the duct broke in two spots, completely separating a section of it from the rest of the frame. I hate glue, so instead of repairing them, I ended up going through three V1 frames and two V2 since they're so cheap. Today, I finally installed my first Trashcan/V3 frame, and hopefully the thicker ducts and supports do their job this time.
Which 200mW? Which upgraded esc? Where this info come from?
Only difference between V1 and V2 is frame. That's it.
It's great quad, and I'm agreed it's best one to buy.
I had both V1 and V2. My V1 had unbalanced props and it vibrates a little on low speed.
V2 props was a little better, but I run TBS 3 blades props, and it's a little better.
Awesome video and review. If you had to pick only one would it be this or the trashcan
Qual é melhor o mobula 7 ou mobula 6hd?
How do you get these to fly on 1S? I have used the bypass connector in one of the battery connector sockets but the quad just doesn't seem to recognise the other battery on its own, so basically I can only fly with two batteries plugged in.
Thanks for the review! You completely sold me on this bad boy! This will be my first drone with over 150 sim hours so far, ready to finally graduate. My one confusion is that the gearbest website says the Basic version is $83 on sale and is pictured with the 6 in 1 charger however, the Standard version is pictured without the charger for $107. Am I missing something?
Yeah I saw that. I think they have an error.
forgive me if i missed it but does this whoop have any type of lost drone alarm or beeper ???
I just bought two Mobula 7 whoops as they are on sale at gearbest, I paid £59 each for the standard Frsky version, and I got two of them as it's cheaper for spares at the price I got them for.
Looks like a fun quad. Another great video.
Standard is the one with the 6 way charger. Get the standard so ur not stuck charging one bat at a time. Basic comes with single USB charger. Standard is the one to get. Just an fyi.
Detailed review,thanks Justin.....
My pleasure!
Hey Justin,
Went to Order Just Now, and it Doesn't say V2 Anymore.?.?.?.?
If they're out, I would rather wait for the V2 like you just did This review on.
Your link sends you there but the V2 version I put in my cart said V2.
Now it just says Mobula 7 without the V2.
The specs say 120 camera FOV.?.?
Your V2 had 160 FOV I Believe.
They have about three listed I believe but it looks like standard, basic, and The HD version.
If you have time to read this could you please let me know if they have sold out of the V2??
I don't mind waiting.
I don't want to buy the first one.
Thank You Justin!!!
Its a other frame you can buy it for 3 dollars
How does this compare to the GEPRC TinyGO?
Your DVR are so clear than mine! Have you changed the onboard camera ?What kind of goggle you use in this video,thanks.
Skyzone 030
Awosom video. I like the full explanation about the quadcopter.. all the best
Thanks Moh
If I fly this without FPV goggles, will the drone beep when the lipo is empty to prevent from over discharging or do I need to use goggles??
Yes
Sorry to ask a stupid question but you're is the 6 way charger powered? I want to buy this but I need an Australian compatible power supply
You speak of 200mw power on the vtx but everything I read states 25mw. Could you please clarify? Thank you
Feature of the v2 maybe or the "HD"? I thought it was 25mW only as well, did you ever . I'm trying to figure out if mine is a v2.
I had to put the mobula 0802 motors on my beta65 n it like just keeps doing runaway? Can u send a cli dump to me
what does blheli report your old escs as? are they both "S-H-50"? this is what mine are reported as and I definitely have a v2 frame but I wasn't aware of an esc update primarily as I've only just received mine at the start of January. I received black props though
I have the tinyhawk S but with 2s the flight time is almost nothing and the motors and battery almost burn my hand with only one flight!
With 1s is very good but if i use outdoor the wind blows and is very dificult to fly! What do you think ?
Worth for me buy this mobula 7 ?
I was surprised when i bought i think is v1 but it came a smoke black v2 frame and when i looked at recent pics Reviews on banggood and like me the Mobula 7 boxes were opened and tapes back together i think at the factory to replace frame from v1's
Best vid about mobula 7. Thanks a lot
Nice video.
I saw you are not using airmode..any reasons?
Which is better, this or the eachine us/de65 pro?
Hi, can you tell me what fonts are you using in your osd? Tks!
Very good and complete review! Thank you very much for explain everything!
Thanks for this great video, I am confused about channel mapping, I have the M7V2 and the manual states that the channel map is TAER1234 but in betflight (as you show) FRSKY is shown in the receiver tab as AERT1234. Do I ignore the manual please?
I worked it out, dialled betaflight back to 10.4.0 set up RMTX16s ar AETR, used TAER1234 in betaflight then changed the inputs to match. works a treat.
This would work with radiomaster and frysky 040 x
Thx
i got the xm+ eu version of the quad but i cant get it to bind to my qx7 any suggestions ?
Your timing is impeccable, my Mobula7 just turned up. Outstanding Fpv machine. 👍👍
You linked to Gearbest to get this new version. Do they actually have stock? I have ordered a Beta75X from them 1st of january, paid, still hasn't shipped early februari. They suggested to select something different instead, I went for the Diatone R349, but guess what... they have no stock for that either, even though the website keeps saying it ships within a few days. But that ship between date just gets pushed into the future...
awesome video!! i love ripping my mobula7 around!!
Will this still work for the f4 version?
just got my mob7! would you recommend your pids/rates tuning for a beginner? i did enter a throttle limit of 50% so to be safe! ;) thx
Yes and yes
200mW? I just bought this one and it still lists the power as 25mW. Did they update the vtx?
Awesome video. Thank you!!!
On my box is F4 and on the board is F4 ???
Are you sure it's 200mw vtx?
Schönes Video. Habe sie mir gleich bestellt bei gear best.
Nice video. I ordered them at gear best.
just lost mine, cause it was flying way too fast out of sight ^^
what a pity that the batteries got lost when falling down, so i ordered eight away a new one :-/
Thanks for another great video. Mobula is my favorite Whoop
Hey there Thx great review . Im new to fpv and have never flown with goggles , in your video when flying with goggles is that exactly what you see in the goggles or is it clearer ?
Analog is all VHS cassette tape quality. Even HD. The HD is the recording but not what you actually see in the goggles. For quality while flying, you need digital like the DJI setup.
Alll i did was switch motors should i find a mobula 7 cli dump
Hel please
Great review, thx Justin
So the mob 6/7 is just the mob v2?? Ive been so confused
You say this version of betaflight firmware (v. 4.0.0) is not the newest (33:01) . Which version is the newest for now?
The latest development build is 4.0.0#1481 from 02-03-2019. The latest official stable release build is 3.5.6 from 17-02-2019
I tried 4.0.0 and went back to 3.5.6 because the thing flew worse with the latest Beta version of Betaflight (4.0, that is).
Hey Justin my mob 7 stopped binding after I had a hard crash. What could have caused this?
Try to rebind it?
Sick always epic content from you keep up the good work 🤙🏼
Jó videók, ne hagyd abba...
Great vid 🤘🏻🤘🏻🤘🏻
GREAT JOB JUSTIN!!!!!!!!!!!!!!!!!!!!!!!!!
WOW!!! YOUR FLYING HAS IMPROVED AN THAT'S JUST FLYING A WHOOP!!!!
A+++++++++++++++++++++
ON THE REVIEW, AND FLYING!!!!
ALL THE WAY MAN!!!!!!!!!!!!!!!!
QUESTION?.?.?.?.?.?.?.
TRASHCAN, OR MOBULA 7, V2..??
I TRUST YOUR OPINION!!!
PS.......
THAT MUSIC ROCKED!!!!!!!!!!!!!!!!!!
MY MAN!!!!!!!!!!!!!
#KEEPUPTHEGOODWORK
John Jenkins mobula7 v2, its just got that agility that trashcan doesn’t, yes trashcan has bigger motors but that comprises the battery. Deffo get the Mobula7 v2, and buy LOTS of batteries, you’ll love it
@@explosivefruits
Thanks man!!
I Just Now went to order the "V2" and it (Does NOT Say V2 Anymore)?!?!
If they ran out I will Just Wait, but I've been through this before, and there is No Returning ANYTHING to China from the US.
I Don't want it unless it's the V2!!
PLEASE let me know if you noticed the same thing using the LINK from THIS video whenever you have the time.
I would really appreciate it Man.
THANK YOU FOR YOUR HELP!!!!
The camera says 120 FOV Not 160 FOV Like Justin Described with the V2.
any idea who the backing track is?
And
i just purchased the old one
Same here!
The one i just got this week came with v2 smoke black frame
@@late2thegatefpvdfreeman319 What all is different in the V2 Mobula 7? I bought the first version but also purchased the V3 frame and some extra batteries. You're saying they possibly send out the originals with the V2 frame now? That would be excellent.
Don't worry its very good still
They're all "v2" now. The only difference is the frame material. It's been out like this for awhile. It's definitely not a 200mW vtx.
There is a mobula6.... it flies 1s. The box here is called mobila6/7 because it's can got 1s or 2s
well dang. i didnt know there was a v2. I just ordered one from RDQ.
I didn't hear your mention anything about air mode in your video. Its 👍👍
Hope that there is Speedy Bee Bluetooth setup teaching ☺
Is there a way to tell if one has V1 or V2 of the M7?
The color of the frame. White for V1. Smoke gray for V2 and V3 Mobula frames.
And the bind button location. Version 1 it’s under the canopy. Version 2 they moved it to the underside near the usb connector.
Great review Justin. I'm really impressed with the Mobula 7 V2, I think I prefer it over the M7 HD model.
Me too in a way.
Why don't they add some transparent plastic "cockpit" to protect the camera?
It's not really needed. I've broken lots of things on my whoops and the cameras usually aren't it.
My 1 version came with a smoke black v2 frame. How do i know if its a v2 model
If it’s smoke black 👍🏻
Ya man it's sweet
This line of sight is nuts how the f do you do it
Does we get remote controller with this drone
No you don't, you will have to bind it to either a frsky, flysky or DSM2/DSMX transmitter. If you don't have a transmitter like that, go get one, you will need it later anyways. (:
Mobula7 HD is the one with the upgraded VTX and ESC also 3s the only good frame for the mobula is version 3 the rest are junk they're only couple of bucks to buy
Put an 85% throttle limit on it. Flys sooo much better
You said 200 mw but on the website it is written 25 mw. What is the real output power ?
It's 25mW. You need to wire a separate module for 200mW. (Purchased separately)
@@fizihkull Thank you, do you have a link ?
help me please, my mobula 7 when im connected to betaflight, at the mode and switching shown nothing how can i fix this prpblem
you have to go back to betaflight v10.4.0 . 10.5.1 did not work for me either, when switching to (mode) tab it would just freeze
why still an f3 FC? in sure it flys great but still an is an f4 or f7 FC that much more expensive at the quantity they buy to make these
The grass is not always greener with an F4 or F7. The F3 flies amazing with less tuning.
@@dronecamps is that just because of the PID settings from factory or the slower loop frequency or who knows but it doesn't matter cause it just flys great? lol sorry just wondering
Thank you Justin. Just got mine and I'm still learning so this was helpful! 👍💯
who has the 4.2 cli dump ?
Awesome review! You should check out the URUAV 6-1 Pro charger 👌
Am I crazy or is the video flickering?
It's flickering, thought my phone was dying, but it's only this vid and at the exact same times
Darn ive got to stop watching your vids its costing me to much money! great little quad!
Better then trashcan??
Yeah please advise which one is better
Aza B mobula7 is better
HD woop or nothing for me so sorry... 🥃cheers🍻
Mobula7 v2 vs trashcan ?!
SpaceNitro mobula7 v2, trashcan has some bad jello, and lower flight times, not to mention its not as agile
Ok, thank you :)
....congrats US - back in the manned space business....