What is the power source on the cheaper cams? I''ve watched a couple of your comparison videos and neither one showed or even said what power source was? Elec or battery? I have Ridgid which use the Makita batteries which I really like as I already have some of the Makita tools.
Hey Tony. Really appreciate your videos. Just subscribed. Ok so I am wondering how Qyteco handles offsets? Is it really limited on what it can maneuver over? Have you found yourself getting stuck snd not being able to scope an entire line? Thanks for the help.
It comes with 2 skids. I never run the big skid but run the small one pretty much every time I use it. It’s ok with offsets depending on the offset I guess. I think ridgid is best for offsets cuz the skid sits back from the head and it’s like a triangle shape
Hello Tony. You mentioned QYTeco's sonde is not very good. Could you expand on that? Is it really hard to locate the QYTeco's camera sonde using the vLoc3-Cam locator? If so, at what depth do you think the QYTeco's sonde pretty much is untraceable? Thank you in advance for your help and for putting together this great video
I thought I commended back on this but I must not have haha. So the sonde is always on, it works but it’s just not as strong as like a ridgid. With my good locator, after around 7-8’ deep the signal gets spotty but it will still locate. My record with it was like 11-13’ deep with it
I have some questions about the QYteco. Can you easily send the videos through email to others from the usb card? Can you edit the videos easily. Does the battery work well? Does it come off so I can change it out and/or charge it? Sorry for all the questions I want to use this for my home inspection business and I have to be able to send the videos to my customers and edit them as needed. Thank you!
Hey Tony, I saw in one of your responses that you like the vlco3. It seems likes there’s a few different vlox 3 models. Which one do you like best. And does one of the vloc models locate sonde and also come with a setup to hook to tracer wires? Really appreciate any help and just subscribed. Thank you!
Hey there… I use the vloc3-cam. Pretty much all I use for locating is 512hz. I think my locator does like 4 or 5 different frequencies but all I use is 512. I think the only different between the cam and pro models are the pro does more frequencies but don’t quote me on that haha. But if you have a signal generator, I’m guessing it would put out the other frequencies that the -cam model can pick up for line locating. I just do sonde locating so I don’t care about the other stuff haha
@@matthewtarpill7851 i honestly couldn’t tell you but I know it’s better than any other locators I have haha. Also all the local municipalities to me use these locators so I figured it can’t be horrible.
Vloc3 is a good locator. Make your live easy and dummy proof. I use Radiodetection Rd 8200 wand that is really great but you need a little experience with it. I work as an utilities locator.
Hey Tony boy ,do you recommend the small (on da right side “ cam 150 ‘ ft to slide down gravity pipe w/ 90’ degree right. Turn ? And do you sell them ? Respectfully Robert M .lake worth ,fl
Hi. Thanks for all your help just bought the qy6688 camera But since I am new to use it would like to know if you can make a video on how to use the locator would help a lot. Thanks.
@@migdalia358 so I’m not expert and I’ve never read a manual or anything on these cuz I’m a guy haha. But, I’ll tell you how I do it. So as long as you got the camera that has a sonde, you don’t have to do anything. The sonde is always on. To locate it with the vloc3, turn it on, make sure it’s set to 512hz and I turn the gain or whatever it is called on the upper left all the way up and start looking for the signal. If you’re far away the arrows are gonna kinda just go all over the place but as you get closer it’ll find it. As you get a stronger signal I keep turning the signal down to get a more accurate locate. It’s usually dead on for me. I have another video on here with me using the locator
Are you able to easily download and send reports/videos? I’m a home inspector and I want to know if the videos are able to be downloaded through the usb card and then transferred easily to be able to send via email and what not? Thanks for the help in advance?
Excellent and very informative reviews between the models. What is the model number of the Qyteco? I want to buy the Qyteco after watching your review. Can you include a link to the website? I was going to get the Kyrie until you showed the resolution between the models.
So far, any issues I’ve had, I’ve contacted them and they figured out what the issue is from asking questions and they sent me replacement parts. Everything on it is easy to change
So, am I to understand that the one Billy Chong sells is the exact same one that Spartan sells? Do they just order them from P&G, double the price and put their own sticker on them?
I don’t know what p&g is but what I was told was that spartan gets them from a company called TVBtech. Billy Chong and TVBtech get them from the same place. But yeah spartan has a huge markup on the same camera
Is sending the money to Billy Chong safe? It feels sketchy seeing it to be honest. How long did it take you get it from him? Did he send you an invoice?
It seems sketchy as hell but it’s legit. I’ve got 3 cameras from him. Just pay him through PayPal if you are concerned. He will send you an invoice and tracking. It comes pretty quick, like a week or 2
@@terjavec How does a push rod break, and what happens when it does? No more picture or just can push it effectively? I'm looking to add sewer inspections for a home inspection company, but not eager to spend 7-10k. The website says that the Qyteco has a 6.8mm cable diameter which is larger than the yellow cable types at 5mm. DO you think 6.8mm is stiff enough for a main line sewer scope inspection? Thanks for any info.
@@foresighthomeinspect hey there, yes that push rod is waaaay better than the little yellow ones. I use it primarily in 3-6”. It pushes really nice. So the first time my push rod went bad, the LEDs would shut off randomly. I replaced the push rod and it fixed the problem. I’ve been using it for a couple months and now the image on the screen started to flicker. I pulled the head off and bypassed the pushrod and it didn’t flicker so it pretty much has to be the push rod. It still works but it’s annoying haha
good comparison, but Im still trying to figure out the brand of the two Chinese made cameras. It would be super helpful when you reference a camera that you say the brand and not "this one" or "these" thanks
Thanks, but some of these cameras don’t have a “brand”. Most of those Chinese ones are manufactured by some companies but you can’t buy from them. So you have to get them from distributors but they all have different names
So I still have my first one I ever bought and it still works. I don’t really use it anymore but for a starter camera it might not be a bad investment. The push rod is pretty small and flimsy though so I don’t think you’d be able to push it through anything bigger than like 4”
@@CycloHexanolit was one of those yellow ones, they don’t really have a name brand. Vevor sells one for pretty cheap on eBay. I prefer the Billy Chong cameras but they are like $1600
so the kyrie and the other one is good for bigger pipes i would say 4 to 6 inch pipe cuz the cable is thicker then the vevor one i believe the vevor is more easy to get thru small pipes like to inch pipe the bad thing about is not self leveling ,,, even the cheap version of kyries dont come with self leveling ,, so i would like to have the kyrie cam for bigger jobs inspections so i`ll keep the vevro one for inside jobs home inspections
Those 2 Chinese ones that look similar are the ones I use for pretty much everything. I don’t usually camera anything smaller than 2” and I camera almost every main line. These thing work in almost any drain. They push better in main than the kyrie does. It’s a smaller push rod but it’s stiffer
I would love to have that nano camera that u hardly use .. any camera would be great something always happens when I try to save up for one .. what do u say
Since I made this video I’ve gotten a handful of other cameras and Billy Chong makes a new one that is like a mini version of the original, so it has a much smaller head and smaller, more flexible push rod. It seems much better than the ridgid nano
Yeah when I bought mine, I talked to her through Facebook messenger, we figured out everything I wanted, then she’ll send you a link to complete the purchase though alibaba then they’ll ship it out.
so which one would you recommend to buy me i do jobs on the weekend i really dont use the camera a lot but i just want to be prepare just in case i need it for bigger pipes or inspections
@@carlossosa2940 I don’t have a vevor, unless you’re talking about those yellow ones. The yellow ones I have don’t push through a mainline like at all. I wouldn’t recommend them at. Your best bet is to contact Billy Chong on Facebook and order a camera from him. $1595 shipped. It’s a great all around camera
@@terjavec yeah i got one the rod is yellow looks like vevor but i dont really know the brand bought off facebook used is good but dont have the sonde version or self leveling and is 65ft i need one 100 or more ft
Yes, the Qyteco is 512hz and so is just about every sewer camera with a sonde. So any 512hz locator should pick it up. I use the metrotech vloc3-cam locator
curious if you have used the bullet type sondes that you can attach to the end of a snake or fishtape. I haven't tried them yet, just wondering if they are comparable to the Ridgid sonde at depth? I really like the Qyteco based on your review but do need a decent sonde too (something dependable up to 15ft depth). I currently have a Ridgid Mini Reel but considering buying a 2nd cam.
I have one from EPL Solutions that goes inside of a spring and it threads onto the end of a snake cable. Supposedly it can be picked up down to 33’ deep but I’ve only used it once but I’m sure glad I had it.
@@terjavec you wanna sell it ,,,,? i have a smalll one looks like vevor but is not venor 65 ft i used many times and is good camera but i dont have the sonde version i would like to get me that one but kyries looks bigger than the one i have cable i think is 3/8 and 1/2 inche mine i think is 5/16 or less
@tony erjavec just bought a cam from Mia. May go through Billy also for a extra cam. Any new news on Mia cams? Any new tips? I'm waiting on my camera in the mail. Would you order any extra supplies for the camera to have on hand? Any place to buy parts for the mia camera? I heard arizona, but never been given a company name
@@ballsie79618 the ones from Mia are pretty specific. No parts from other cameras are interchangeable with her Qyteco. It’s a good camera. My only issue has been the push rod and some of the camera head springs. I’d highly recommend getting some extra springs. They are cheap and easy to replace. I don’t know why I’ve had issues with my push rods. They show no signs of damage but they have internal issues. I love the camera from billy. It’s not as HD as Mia’s but I feel like it’s more durable. I wish the heads between the 2 were interchangeable because the only thing that really goes wrong with Billy’s is a wire in the spring might break but you can’t easily fix that, so you’re better off replacing the whole head with his which is like $400 versus like $40 for a new spring on Mia’s
You been a huge help. I own a plumbing company. Starting a drain cleaning business for my son to have something for himself. I bought him mia cam to start. I used to be on fb alot but had my fill of it. I think I remember seeing u on the sewer and drain page. Do you just order all parts through mia?
There’s a couple ways. The wifi battery boxes that come with the cheap $300 cameras work the best in my opinion. Otherwise, I’ve also done it with a wifi backup camera for a car. All you need is a component input, which the kyrie already has the output put so it works
@@davidkolbasky8066 I used this one. It works but not the greatest. I haven’t used it in a while so I don’t know if the app for it is up to date or anything like that www.ebay.com/itm/143935006708?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YrvbFQ5ESLy&sssrc=2349624&ssuid=QHvy_8pnSnO&var=&widget_ver=artemis&media=COPY
I ordered the HBUDS from Amazon, self leveling 7" screen, 100ft. $439.00 for my home use. Plumbers want $400. For the service alone. I hope I can use it for a last year. Chinese origin 😂 what can I expect.
I hope it works for you. If it’s the same as my little yellow one, it works ok up to like 4” pipe. I’m going to be making another big comparison video soon. Since I made this video I bought like 5 more cameras haha
Really? Were they the same model or different ones? I’m still using the original one I bought from him years ago. I have the 2 newer versions too but I haven’t used either yet
@@terjavec in Europe we have a different Billy Chung,but the same camera you have. After using them for one year problems started. Sonde wasn't working All the time, on-off button stuck and problems with the camera connection to the screen.
@@freddylageschaar6028 yeah there’s one big company that makes them but they don’t sell them so a bunch of different people sell them. Billy seems the best to deal with to me, but the only issues I’ve had so far are a wire inside the spring will break from from bending too sharp and I’ve had that interconnect cable go bad a couple times too. I’ve never had a sonde issue yet though. Even with some issues, I think it’s the the best bang for your buck
I don’t have any vivax cameras but I do have a bunch of vivax camera heads. At the end of the video I connect a vivax head to a ridgid monitor but it doesn’t show up very well in the video. Vivax does have very nice cameras though
@@terjavec ok got it! I also you use an off brand camera system for about 31/2 years now it’s been working great for me & for the price you can’t beat, I like the with the 150’ it looks nice and clear
If you’re referring to the red ones that look similar. One is the Qyteco qy6688 and the other one really doesn’t have an actual name or model number because there are several companies that sell the same camera under different names, most popular though, is the Spartan Sentinel
Your giving alot of info but your all over the place with details people don't understand what you mean by billy chong on facebook lol i understood alot more through the comments section then from actual video. Thanks for content people want to know where to buy and pricing no one knows what i got this from mia means lol.
Thanks for the feedback. I basically assumed anyone who found these videos had already been in contact with Billy Chong or Mia Meng and are just looking for some feedback on them haha. But with that being said, the only way I know how to get ahold of them is through Facebook anyway haha
Please keep us updated with your Qyteco. I just purchased this because of this video.Thank you so much.
How is it holding up?
@@kD_5555_interested in hearing an answer
What is the power source on the cheaper cams? I''ve watched a couple of your comparison videos and neither one showed or even said what power source was? Elec or battery? I have Ridgid which use the Makita batteries which I really like as I already have some of the Makita tools.
I am really curious as to where you purchased the QYTECO camera?
Hey Tony. Really appreciate your videos. Just subscribed.
Ok so I am wondering how Qyteco handles offsets? Is it really limited on what it can maneuver over? Have you found yourself getting stuck snd not being able to scope an entire line? Thanks for the help.
It comes with 2 skids. I never run the big skid but run the small one pretty much every time I use it. It’s ok with offsets depending on the offset I guess. I think ridgid is best for offsets cuz the skid sits back from the head and it’s like a triangle shape
Hello Tony. You mentioned QYTeco's sonde is not very good. Could you expand on that? Is it really hard to locate the QYTeco's camera sonde using the vLoc3-Cam locator? If so, at what depth do you think the QYTeco's sonde pretty much is untraceable? Thank you in advance for your help and for putting together this great video
I thought I commended back on this but I must not have haha. So the sonde is always on, it works but it’s just not as strong as like a ridgid. With my good locator, after around 7-8’ deep the signal gets spotty but it will still locate. My record with it was like 11-13’ deep with it
There’s two camera/cable options on the 6688. Is yours the 5.3mm cable or the 4.8mm w small camera? Thanks for the video and the info.
Mine is the bigger one. I’ve never tried the smaller one but I think I should be getting the smaller one from Billy Chong in the next couple days
Great video. Trying to purchase a QYTeco and can’t find a distributor. Any suggestions? Thanks
This is Mia’s information
WhatsApp:
+852 66385917
Email: mia@gyteco.com
Phone: +86 19137939554
I have an excavating business and need a camera for figuring out issues with drains and sewer lines. I was wondering what camera you recommend.
I truly think the best overall camera is the camera from Billy Chong. It’s affordable and does everything anyone would really need
Just ordered the qyteco I’ve been hearing good things about it
I have some questions about the QYteco. Can you easily send the videos through email to others from the usb card? Can you edit the videos easily. Does the battery work well? Does it come off so I can change it out and/or charge it? Sorry for all the questions I want to use this for my home inspection business and I have to be able to send the videos to my customers and edit them as needed. Thank you!
Hey Tony, I saw in one of your responses that you like the vlco3. It seems likes there’s a few different vlox 3 models. Which one do you like best. And does one of the vloc models locate sonde and also come with a setup to hook to tracer wires? Really appreciate any help and just subscribed. Thank you!
Hey there… I use the vloc3-cam. Pretty much all I use for locating is 512hz. I think my locator does like 4 or 5 different frequencies but all I use is 512. I think the only different between the cam and pro models are the pro does more frequencies but don’t quote me on that haha. But if you have a signal generator, I’m guessing it would put out the other frequencies that the -cam model can pick up for line locating. I just do sonde locating so I don’t care about the other stuff haha
Great. Thanks a lot for getting back to me!
Do you think the Vloc3 is the best on the market?
@@matthewtarpill7851 i honestly couldn’t tell you but I know it’s better than any other locators I have haha. Also all the local municipalities to me use these locators so I figured it can’t be horrible.
Vloc3 is a good locator. Make your live easy and dummy proof. I use Radiodetection Rd 8200 wand that is really great but you need a little experience with it. I work as an utilities locator.
Hey Tony boy ,do you recommend the small (on da right side “ cam 150 ‘ ft to slide down gravity pipe w/ 90’ degree right. Turn ? And do you sell them ? Respectfully Robert M .lake worth ,fl
Hey there, it should be able to do it, I don’t sell them. I could get you in touch with someone who does though
Hi. Thanks for all your help just bought the qy6688 camera But since I am new to use it would like to know if you can make a video on how to use the locator would help a lot. Thanks.
Bought the vloc3 cam but not 100% how to use if you can show what all the numbers and arrows mean. Thanks.
@@migdalia358 so I’m not expert and I’ve never read a manual or anything on these cuz I’m a guy haha. But, I’ll tell you how I do it. So as long as you got the camera that has a sonde, you don’t have to do anything. The sonde is always on. To locate it with the vloc3, turn it on, make sure it’s set to 512hz and I turn the gain or whatever it is called on the upper left all the way up and start looking for the signal. If you’re far away the arrows are gonna kinda just go all over the place but as you get closer it’ll find it. As you get a stronger signal I keep turning the signal down to get a more accurate locate. It’s usually dead on for me. I have another video on here with me using the locator
Are you able to easily download and send reports/videos? I’m a home inspector and I want to know if the videos are able to be downloaded through the usb card and then transferred easily to be able to send via email and what not? Thanks for the help in advance?
Can you make a video on how to connect the wifi box to the tvbtech?
Excellent and very informative reviews between the models. What is the model number of the Qyteco? I want to buy the Qyteco after watching your review. Can you include a link to the website? I was going to get the Kyrie until you showed the resolution between the models.
Hi there, the model Qyteco I have is QY6688. 21mm head, 512hz, self leveling. 6.8mm and 50m push rod, with a 13.3” monitor
How much was your qyteco ? What is the warranty? How long did it take to get it?
Hey there, so I think it was around $1600ish, I don’t totally remember. It’s got a 1 year warranty and I think it took like a week or so to get it
Thanks for the info. Wanted to ask about warranty do you have to ship to china or ? Are they good on warranty?
So far, any issues I’ve had, I’ve contacted them and they figured out what the issue is from asking questions and they sent me replacement parts. Everything on it is easy to change
Was the model of the qy teco those 2 sewer cameras? Thanks. By the way great video.
I’m not sure what you’re asking but my Qyteco camera model is QY6688
Thanks for the vid! Where can you buy the QYTeco sewer cam? Can you share a link? Thanks!
I got mine from Mia Meng on Facebook. The sale goes through alibaba . com
So, am I to understand that the one Billy Chong sells is the exact same one that Spartan sells? Do they just order them from P&G, double the price and put their own sticker on them?
I don’t know what p&g is but what I was told was that spartan gets them from a company called TVBtech. Billy Chong and TVBtech get them from the same place. But yeah spartan has a huge markup on the same camera
Thanks for the video can you use the Ridgid monitor qytrco
I’m sure if you made some sort of an adapter
Is sending the money to Billy Chong safe? It feels sketchy seeing it to be honest. How long did it take you get it from him? Did he send you an invoice?
It seems sketchy as hell but it’s legit. I’ve got 3 cameras from him. Just pay him through PayPal if you are concerned. He will send you an invoice and tracking. It comes pretty quick, like a week or 2
Hello tony, how about durability of cable of them? and how about flexiblitliy of camera heads? which ones are better?
Well, I will say this. I think I just broke my second push rod on the Qyteco in 3 months. I use/abuse that one more than the others too though.
@@terjavec How does a push rod break, and what happens when it does? No more picture or just can push it effectively? I'm looking to add sewer inspections for a home inspection company, but not eager to spend 7-10k. The website says that the Qyteco has a 6.8mm cable diameter which is larger than the yellow cable types at 5mm. DO you think 6.8mm is stiff enough for a main line sewer scope inspection? Thanks for any info.
@@foresighthomeinspect hey there, yes that push rod is waaaay better than the little yellow ones. I use it primarily in 3-6”. It pushes really nice. So the first time my push rod went bad, the LEDs would shut off randomly. I replaced the push rod and it fixed the problem. I’ve been using it for a couple months and now the image on the screen started to flicker. I pulled the head off and bypassed the pushrod and it didn’t flicker so it pretty much has to be the push rod. It still works but it’s annoying haha
good comparison, but Im still trying to figure out the brand of the two Chinese made cameras. It would be super helpful when you reference a camera that you say the brand and not "this one" or "these" thanks
Thanks, but some of these cameras don’t have a “brand”. Most of those
Chinese ones are manufactured by some companies but you can’t buy from them. So you have to get them from distributors but they all have different names
Are you using the QY6688-21mm-5.3mm or the QY6688-21mm-6.8mm?
6.8mm
Do you have an opinion on these cameras under 300 dollars? Im looking to get one to expand my work but cant afford the mid priced ones.
So I still have my first one I ever bought and it still works. I don’t really use it anymore but for a starter camera it might not be a bad investment.
The push rod is pretty small and flimsy though so I don’t think you’d be able to push it through anything bigger than like 4”
What camera was it? Sounds interesting @@terjavec
@@CycloHexanolit was one of those yellow ones, they don’t really have a name brand. Vevor sells one for pretty cheap on eBay. I prefer the Billy Chong cameras but they are like $1600
Can you use the rigid locator with the cheaper chinese cameras?
Yup. They are all 512hz
Can individuals buy the 3499fb from tab tech? Or how do you buy from that Billy Chong fellow? Thank you
I get all of mine directly from Billy Chong. The only way I know how to contact him is through facebook though
Thank you@@terjavec
so the kyrie and the other one is good for bigger pipes i would say 4 to 6 inch pipe cuz the cable is thicker then the vevor one i believe the vevor is more easy to get thru small pipes like to inch pipe the bad thing about is not self leveling ,,, even the cheap version of kyries dont come with self leveling ,, so i would like to have the kyrie cam for bigger jobs inspections so i`ll keep the vevro one for inside jobs home inspections
Those 2 Chinese ones that look similar are the ones I use for pretty much everything. I don’t usually camera anything smaller than 2” and I camera almost every main line. These thing work in almost any drain. They push better in main than the kyrie does. It’s a smaller push rod but it’s stiffer
I would love to have that nano camera that u hardly use .. any camera would be great something always happens when I try to save up for one .. what do u say
Since I made this video I’ve gotten a handful of other cameras and Billy Chong makes a new one that is like a mini version of the original, so it has a much smaller head and smaller, more flexible push rod. It seems much better than the ridgid nano
I don’t see the vivax on the video. I will like to the comparaison between qyteco vs Vivax ?
Unfortunately I don’t have a vivax camera. I do, however, have like 40 vivax heads. The image quality is clearer on the Qyteco versus the vivax
Tony, How did you order this Qyteco from Mia. Did you send her your information through Facebook?
Yeah when I bought mine, I talked to her through Facebook messenger, we figured out everything I wanted, then she’ll send you a link to complete the purchase though alibaba then they’ll ship it out.
so which one would you recommend to buy me i do jobs on the weekend i really dont use the camera a lot but i just want to be prepare just in case i need it for bigger pipes or inspections
Overall, I have the least amount of issues with the cameras from Billy Chong.
The ridgid m40 is nice too but it’s also $10k vs $1600
@@terjavec 10 k for a beginner is a lot ,, what do you think a bout the vevor i need one with the sonde just in case or the kyries ?
@@carlossosa2940 I don’t have a vevor, unless you’re talking about those yellow ones. The yellow ones I have don’t push through a mainline like at all. I wouldn’t recommend them at.
Your best bet is to contact Billy Chong on Facebook and order a camera from him. $1595 shipped. It’s a great all around camera
@@terjavec yeah i got one the rod is yellow looks like vevor but i dont really know the brand bought off facebook used is good but dont have the sonde version or self leveling and is 65ft i need one 100 or more ft
Can the Ridgid locator be used wit the Qyteco cameras?
Yes, the Qyteco is 512hz and so is just about every sewer camera with a sonde. So any 512hz locator should pick it up. I use the metrotech vloc3-cam locator
Tony, When you ordered your camera from Mia did you have any concerns?
At first, because i never ordered from alibaba . com before but everything is legit with her
Thanks
curious if you have used the bullet type sondes that you can attach to the end of a snake or fishtape. I haven't tried them yet, just wondering if they are comparable to the Ridgid sonde at depth? I really like the Qyteco based on your review but do need a decent sonde too (something dependable up to 15ft depth). I currently have a Ridgid Mini Reel but considering buying a 2nd cam.
I have one from EPL Solutions that goes inside of a spring and it threads onto the end of a snake cable. Supposedly it can be picked up down to 33’ deep but I’ve only used it once but I’m sure glad I had it.
How much does a good quality 200 meter depth camera cost?
I don’t know if anyone makes a camera that long other than like a crawler camera
Good timing I guess I’ll hold off on the kyrie
They aren’t that horrible but I wouldn’t buy another one
I found the qyteco on alibaba for 600 bucks
They have lots of different variations. The one I bought has the big screen, 50m 6.8mm cable, self leveling head with a sonde.
@@terjavec you wanna sell it ,,,,? i have a smalll one looks like vevor but is not venor 65 ft i used many times and is good camera but i dont have the sonde version i would like to get me that one but kyries looks bigger than the one i have cable i think is 3/8 and 1/2 inche mine i think is 5/16 or less
@@carlossosa2940 I’m a hoarder, I don’t sell anything hahaha
What brand is the yellow push rod for smaller drains? The cheap 300$ Camera
I don’t think there’s an actual brand name on them. I’ve seen several different companies sell them
@tony erjavec just bought a cam from Mia. May go through Billy also for a extra cam. Any new news on Mia cams? Any new tips? I'm waiting on my camera in the mail. Would you order any extra supplies for the camera to have on hand? Any place to buy parts for the mia camera? I heard arizona, but never been given a company name
@@ballsie79618 the ones from Mia are pretty specific. No parts from other cameras are interchangeable with her Qyteco. It’s a good camera. My only issue has been the push rod and some of the camera head springs. I’d highly recommend getting some extra springs. They are cheap and easy to replace. I don’t know why I’ve had issues with my push rods. They show no signs of damage but they have internal issues.
I love the camera from billy. It’s not as HD as Mia’s but I feel like it’s more durable. I wish the heads between the 2 were interchangeable because the only thing that really goes wrong with Billy’s is a wire in the spring might break but you can’t easily fix that, so you’re better off replacing the whole head with his which is like $400 versus like $40 for a new spring on Mia’s
You been a huge help. I own a plumbing company. Starting a drain cleaning business for my son to have something for himself. I bought him mia cam to start. I used to be on fb alot but had my fill of it. I think I remember seeing u on the sewer and drain page. Do you just order all parts through mia?
@@ballsie79618 I’m sure it was me… I comment a lot hahaha. Yeah everything goes through her
How about the camera Drain Addict used.
I don’t know who or what that is
@@terjavec th-cam.com/video/S0jGGsxZkX0/w-d-xo.html the most famous drain cleaner in TH-cam 🤭
How did you setup the WiFi for Kyrie cam?
There’s a couple ways. The wifi battery boxes that come with the cheap $300 cameras work the best in my opinion. Otherwise, I’ve also done it with a wifi backup camera for a car. All you need is a component input, which the kyrie already has the output put so it works
@@terjavec sorry to bother you. Which one do you have for the back up camera Device
@@davidkolbasky8066 I used this one. It works but not the greatest. I haven’t used it in a while so I don’t know if the app for it is up to date or anything like that
www.ebay.com/itm/143935006708?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YrvbFQ5ESLy&sssrc=2349624&ssuid=QHvy_8pnSnO&var=&widget_ver=artemis&media=COPY
What locator do you use with these?
I use the metrotech vloc3-cam locator. Amazing locator
@@terjavec thank you!
Si on utilise tout ses materiels de grande qualiteé combien coute le bricoĺe
whats the Qyteco model numbers ?
Mine is the QY6688
Can you send me the modelo AND brandy the second camera from e Bay. AND the 3rd. Thanks
Sorry I don’t really know exactly which ones you’re referring to. Are you talking about the 2 similar looking red ones?
Where to buy QY6688 QYTeco?
I bought mine from Mia Meng on Facebook
I ordered the HBUDS from Amazon, self leveling 7" screen, 100ft. $439.00 for my home use. Plumbers want $400. For the service alone. I hope I can use it for a last year. Chinese origin 😂 what can I expect.
I hope it works for you. If it’s the same as my little yellow one, it works ok up to like 4” pipe. I’m going to be making another big comparison video soon. Since I made this video I bought like 5 more cameras haha
I also had 2 Billy Chung camera's. One of em was real good. The next one was shit
Really? Were they the same model or different ones? I’m still using the original one I bought from him years ago. I have the 2 newer versions too but I haven’t used either yet
@@terjavec in Europe we have a different Billy Chung,but the same camera you have. After using them for one year problems started. Sonde wasn't working All the time, on-off button stuck and problems with the camera connection to the screen.
@@freddylageschaar6028 yeah there’s one big company that makes them but they don’t sell them so a bunch of different people sell them. Billy seems the best to deal with to me, but the only issues I’ve had so far are a wire inside the spring will break from from bending too sharp and I’ve had that interconnect cable go bad a couple times too. I’ve never had a sonde issue yet though.
Even with some issues, I think it’s the the best bang for your buck
The video title mentions Vivax yet you do not show or mention any Vivax-Metrotech cameras.
I don’t have any vivax cameras but I do have a bunch of vivax camera heads. At the end of the video I connect a vivax head to a ridgid monitor but it doesn’t show up very well in the video. Vivax does have very nice cameras though
Looking at qyteco but unsure of their process because they want western Union for less than $2k
When I purchased mine, we went through alibaba.com
It costs a little more because of processing fees though.
@@terjavec thank you for the quick reply and the detailed overview.
@@life_is_adventure glad i could help.
Do you have Billy’s contact info?
I do not unfortunately. I talk with him through Facebook messenger
My Nano reel is broken all the time, I have 3 Ridgid cameras and a pipe freezer all have big issues, I regret investing in Ridgid products.
Yeah my sonde on my nano quit working the second time I ever used it. Ridgid won’t fix it under warranty either
You said it has 150’ feet put you pushed out 170’feet???
So the push rod is 50 meters. I just say it’s 150’ but it’s actually more like 165’
@@terjavec ok got it! I also you use an off brand camera system for about 31/2 years now it’s been working great for me & for the price you can’t beat, I like the with the 150’ it looks nice and clear
@@JB-by8zk that Qyteco camera is the clearest picture I’ve ever seen out of any sewer camera I’ve used
@@terjavec Do you have a link to it? Or where can I get one when mine go’s bad?
I got mine through Mia Meng on Facebook
Hello would you send me Billy Chung’s contact information? I’d like to buy a camera.
The only way I know how to contact him to purchase cameras is through Facebook. He doesn’t really have a website to order from
you do not show the name of model you like really helpful if you did
If you’re referring to the red ones that look similar. One is the Qyteco qy6688 and the other one really doesn’t have an actual name or model number because there are several companies that sell the same camera under different names, most popular though, is the Spartan Sentinel
All then made in China but ridgid or Milwaukee $10k USA dollars a totally rip-off
Has anyone here ordered the QYteco from Billy Chong and Mia? Just want to have double verification before I drop $1600?😂
Have you ever tried forbest sewer cams?
Not specifically but I’m pretty sure they sell the same as the yellow one I have
Your giving alot of info but your all over the place with details people don't understand what you mean by billy chong on facebook lol i understood alot more through the comments section then from actual video. Thanks for content people want to know where to buy and pricing no one knows what i got this from mia means lol.
Thanks for the feedback. I basically assumed anyone who found these videos had already been in contact with Billy Chong or Mia Meng and are just looking for some feedback on them haha. But with that being said, the only way I know how to get ahold of them is through Facebook anyway haha