I’m skeptical about ordering from Billy or Mia, because I’ve talked to both and it just seems a little sketch. How do I know I will receive what I’m paying for? There isn’t much online about either one of the companies nor can I really find honest reviews.
To be honest both do seem sketchy haha but they are both legit. If you contact Mia and agree on what you want, she’ll send you a link and you complete the payment and everything through alibaba.com.. through billy seems even more sketchy because once you agree on what you want, he gives you an email address that you send money through PayPal to. I have made multiple purchases from both of them and they are both legit.
I appreciate that, I am waiting for a response from Billy Chong, so if I don’t get one I will definitely take you up on your offer thanks again.@@terjavec
@@nickbonaccorso4768 yeah just contact Mia. It’s usually quick and easy. I just got a shipment from her last week and I think I ordered it like a week prior
I really don't understand how Ridgid's cheapest monitor option is like $3,000 and it's tiny. Personally I think a monitor should be at least 10". Does anyone know of an aftermarket monitor system that's affordable? The solution I came up with was to buy the LT1000 control module (now discontinued) used for $500 & pair it with a $100 10" windows based tablet with the Seesnake HQ software (Windows only) then pack it all into a Ridgid toolbox. Yes, it means carrying in an extra case & takes a couple extra mins to set up but I saved like $4k. I think my setup compares better to the cs12 monitor ($5K) due to larger screen size and internal hard drive on tablet where job footage is stored. I have since bought another LT1000 as a back up.
Do you have the TVBTECH camera? I got mine from a guy named Billy Chong for $1600 and this camera isn’t that same camera. This one I got coke someone named Mia Meng also for around $1600
@@terjavec mine has a good camera, counter, the sond works , haven't worked out the recording function. My monitor is smaller. I really like your monitor did you buy on Amazon or Ebay?
I wouldn’t say the sonde is bad, it’s just not as strong as ridgid. My record with the Qyteco so far was 13’ deep but usually after like 8’ the signal gets weak
@@terjavec what do you think about the forbest does it have a good sonde ,,, or weak ,, also thinking about buy me a gen eye sewer camera but dont know if they good or have good sonde ?
@@carlossosa2940 definitely have a weaker sonde than most camera but if you service an area that doesn’t have deep sewers and a good locator you shouldn’t have any issues. Sewers around me are using 8-12’ down and I use a metrotech vloc3-cam locator and it locates just fine usually
@@terjavec that what i was thinking im in north carolina area residential sewer not too deep about less than 5ft i have General Wire GL-100 Gen-Eye Hot Spot Pipe Locator ,but looking to buy me a real good camera , so i got offered a gen eye 200ft wifi camera for 3,200$ all in one Gen-Eye GPR 500, also .a forbest 200ft all in one for 1,600
@@carlossosa2940 I’ve never used either of those so I can’t tell you good info. Qyteco makes a decent camera with around 170’ of push rot for like $1600. That camera has the clearest picture of any camera I have ever seen
Nice video!
The always pricy Ridged with the ridiculously small screen.
AGREED! Why has no one come up with an aftermarket monitor set up for Seesnake?
I just got one of these. How do you turn on the sonde? Or is it always on?
Yes, it’s always on… it’s not as strong as a ridgid but for the price, it works pretty good
Please share the link where to buy the QY6688. Thank you
m.made-in-china.com/product/13-3inch-Self-Leveling-and-512Hz-Sonde-HD-Sewer-Drain-Video-CCTV-Pipe-Inspection-Camera-1960097365.html
How long did it take to receive your qy teco camera after you ordered it??
Like a week or 2
Is the cable strong enough to run through vents or only good enough to run through cleanouts
@@MrBambam310possibly. It’s a very small push rod but it pushes well. Just like everything though, the straighter the line the easier to push
Thankyou appreciate the feedback .
Is There any way where I can use locater to QY Teco
The qyteco camera has a sonde that is always on. Any 512hz locator should work
Do they sell that monitor kit to work with Seesnake? I think it would sell like hotcakes!
My question exactly. Anyone know?
I’m skeptical about ordering from Billy or Mia, because I’ve talked to both and it just seems a little sketch. How do I know I will receive what I’m paying for? There isn’t much online about either one of the companies nor can I really find honest reviews.
To be honest both do seem sketchy haha but they are both legit. If you contact Mia and agree on what you want, she’ll send you a link and you complete the payment and everything through alibaba.com.. through billy seems even more sketchy because once you agree on what you want, he gives you an email address that you send money through PayPal to. I have made multiple purchases from both of them and they are both legit.
@@terjavec Can you provide contact info for the Qyteco. Looking to buy one now. Thanks
@@donaldthompson3434 best way is to find her on Facebook and messenger her. Her name is Mia Meng
@@terjavecmia is qyteco?
You seem to have a lot of cameras, do you want to sell any? I’m a landlord so I wouldn’t be using that often. Thanks👍
I have a ton of cameras haha but unfortunately I don’t sell any of them. I can get you in touch with people that sell them though if you’d like
I appreciate that, I am waiting for a response from Billy Chong, so if I don’t get one I will definitely take you up on your offer thanks again.@@terjavec
If you needed to buy new spring and head how do you do it ?
How do you buy it? Or how do you replace it?
@@terjavec how do you buy it
I should say do I just contact Mia for any additional parts and upgrades . I see you have that 29 mm head and spring
@@nickbonaccorso4768 yeah just contact Mia. It’s usually quick and easy. I just got a shipment from her last week and I think I ordered it like a week prior
Hey does the qyteco have zonde?
Yes it does. It is always on. It’s not as powerful as like a ridgid but it definitely does work. The signal is kind of bouncy
I really don't understand how Ridgid's cheapest monitor option is like $3,000 and it's tiny. Personally I think a monitor should be at least 10". Does anyone know of an aftermarket monitor system that's affordable?
The solution I came up with was to buy the LT1000 control module (now discontinued) used for $500 & pair it with a $100 10" windows based tablet with the Seesnake HQ software (Windows only) then pack it all into a Ridgid toolbox. Yes, it means carrying in an extra case & takes a couple extra mins to set up but I saved like $4k. I think my setup compares better to the cs12 monitor ($5K) due to larger screen size and internal hard drive on tablet where job footage is stored. I have since bought another LT1000 as a back up.
I agree… it’s small and very expensive
How did you get the qy
Through Facebook, contact a woman named Mia Meng
@@terjavec tha bad thing that they ship from china and take long and the shipping cost is high
@@carlossosa2940 I think shipping is like $350 and it takes about a week or 2
How much is the qyteco 6688?
I’m not sure, you’d have to contact someone that sells them but I think I was like the 2nd sale in the USA and I believe it was around $1500
How much was that camera with locator
The m40 is around $10k… Qyteco is like $1600. I use a metrotech vloc3-cam locator
Is the 1600 USD?
I have thatcheaper camera cost me about 2500 I think. Good value for the money
Do you have the TVBTECH camera? I got mine from a guy named Billy Chong for $1600 and this camera isn’t that same camera. This one I got coke someone named Mia Meng also for around $1600
@@terjavec mine has a good camera, counter, the sond works , haven't worked out the recording function. My monitor is smaller.
I really like your monitor did you buy on Amazon or Ebay?
Self leveling It is a good dependable camera battery life is good
@@TheDavidarlen is this the the camera you have?
th-cam.com/video/ZJ7mrQC9CjU/w-d-xo.html
@@terjavec would you put this over kyrie for first camera..thanks
When you say it has a not so good sond. what we talking are the difference in feet here?
Yeah. It’s got a good signal if it’s like 6’ deep. After that it starts getting weaker
@@terjavec cool thx
How bad is the sonde?
I wouldn’t say the sonde is bad, it’s just not as strong as ridgid. My record with the Qyteco so far was 13’ deep but usually after like 8’ the signal gets weak
@@terjavec what do you think about the forbest does it have a good sonde ,,, or weak ,, also thinking about buy me a gen eye sewer camera but dont know if they good or have good sonde ?
@@carlossosa2940 definitely have a weaker sonde than most camera but if you service an area that doesn’t have deep sewers and a good locator you shouldn’t have any issues. Sewers around me are using 8-12’ down and I use a metrotech vloc3-cam locator and it locates just fine usually
@@terjavec that what i was thinking im in north carolina area residential sewer not too deep about less than 5ft i have General Wire GL-100 Gen-Eye Hot Spot Pipe Locator ,but looking to buy me a real good camera , so i got offered a gen eye 200ft wifi camera for 3,200$ all in one Gen-Eye GPR 500, also .a forbest 200ft all in one for 1,600
@@carlossosa2940 I’ve never used either of those so I can’t tell you good info. Qyteco makes a decent camera with around 170’ of push rot for like $1600. That camera has the clearest picture of any camera I have ever seen
我是管道内窥镜电缆专业制造商！我们可以配套各个型号的推杆电缆
Which company do you work for?