Estupendo! 👍🏼 Y sería genial hacer que cada flecha permaneciese encendida hasta el final del ciclo (coincidirían las 3 encendidas durante un momento). Pero no se me ocurre cómo implementarlo con un sumador 4017... Alguna idea? 🤔
If you mirror this circuit on another similar perf board with a Toggle switch we can make two separate indicators with individual indicator control... :)
Greetings, I'm Brazilian and sorry my English please. Your projects are fantastic and I admire them a lot. I have a question: How would I to do to use a 12 VDC power supply? I wanted to make a circuit like this to use in the car arrows (direction sign). Thanks and congratulations! Hugs from Rio de Janeiro - Brazil.
@@estechknowledge I'm very grateful for the guidance. I will use 1k resistors in my project. I think it's better than connecting 3 LEDs in series. Hugs and thanks again dear friend. Success in your life with blessings and health
Nice project. My question is solder jump wire you use I ordered some from AliExpress but it's taking no solder at all. So there is alotte different jump wire on the market. Could you help me with that?
Thanks for sharing this project. Greetings from Saltillo. México. 🤗🙏🇲🇽
Nice project. Thanks for sharing
Creative video, thanks for sharing :)
Excelente
Thanks for sharing, would be possible to increase size?
Estupendo! 👍🏼
Y sería genial hacer que cada flecha permaneciese encendida hasta el final del ciclo (coincidirían las 3 encendidas durante un momento). Pero no se me ocurre cómo implementarlo con un sumador 4017...
Alguna idea? 🤔
Very nice idea🙏❤
Thanks for sharing 🙏🥰
Big like 👍
Thank you for your support ❤️
Super
super 👌🏻🙏🏻
Wair can I get bord like that?
Con 12v también funciona para agregarle más leds
If you mirror this circuit on another similar perf board with a Toggle switch we can make two separate indicators with individual indicator control... :)
And if you make enough of them, and put a GoPro on a remote control car, you can create your own virtual racing game.
просто и красиво
Coba buat tegangan 12vol mas
Greetings,
I'm Brazilian and sorry my English please.
Your projects are fantastic and I admire them a lot. I have a question: How would I to do to use a 12 VDC power supply? I wanted to make a circuit like this to use in the car arrows (direction sign).
Thanks and congratulations! Hugs from Rio de Janeiro - Brazil.
You can use a step down module
Or you can contact 3 LEDs in series
Or connect 1k resistors to the LEDs to make this circuit for 12V.
@@estechknowledge I'm very grateful for the guidance. I will use 1k resistors in my project. I think it's better than connecting 3 LEDs in series. Hugs and thanks again dear friend. Success in your life with blessings and health
چند ولت هست؟ v12?
Nice project.
My question is solder jump wire you use I ordered some from AliExpress but it's taking no solder at all.
So there is alotte different jump wire on the market.
Could you help me with that?
I use single string of a 2mm copper wire.
Like
awesome! but how can you get it to flash 1 + 2 + 3 (all on) and then all off and start again?
You have to use 74HC595
Interesting project! 👍Can you make ac street light circuit?
Automatic on/off?
@@estechknowledge yes👍
Put the circuit plan in.
How to make 24v time delay on circuit pls tell me
I didn't understand what you said
Very Nice 👌👍
Would you like to publish circuit diagram?
Available in the video description
Diagram pls
Available in the video description
Diagrama bro like like
Available in the video description
5mm LED (21)
16 pin IC base
8 pin IC base
15k resistor
10uf iapastior
220 resistor (3)
BC547 Transistor (3)
Iska speed badao
Use lower value resistor or capacitor on 555 IC.
why didn't you solder it right the first time ? LOL
I didn't notice it at the first time while soldering 😁
I could have re-shooted that parts, but I don't want to hide my mistakes.
Way to go! Keep it 💯👍
🟨🟨🟨🟨🟨🟨🟨
🟨⬛🟨🟨🟨⬛🟨
🟨⬛🟨🟨🟨⬛🟨
🟨🟨🟨🟨🟨🟨🟨
🟨⬛⬛⬛⬛⬛🟨
🟨🟨⬛⬛⬛🟨🟨 I like this channel!
Wair can I get bord like that?