I make 220v electric Generator from 6 Microwave Transformers
ฝัง
- เผยแพร่เมื่อ 3 ก.ย. 2021
- ╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝ NOW, FOR FREE: bit.ly/MyBestDIY
#generator
#electricgenerator
#220vgenerator - วิทยาศาสตร์และเทคโนโลยี
*I make free 220v generator under a NASA project* th-cam.com/video/-0MN7Tvxmho/w-d-xo.htmlsi=NJQc-GNT0XdjHbvz
Alone, in a field surrounded by water, bare wire alternator and the first thing you do is to get yourself properly wet before plugging the rest of the appliances. Genius, absolutely genius.
"You only live once..."
And no voltmeter, no ammeter. Nothing at all. Running without knowing not safe. 😂😂😂
and being gah damn bear food
His contraption doesn't have the current required to kill him. I rather like the inventiveness.
And we are concerned and protected by bs7671, how many gold card holders could do what he just did? I love TH-cam for these moments. This is raw talent and full understanding of a science and its principles. Lovely. Where is the PPE? He is still alive, right?
Something is fishy here. When the guy plugs in the pump, fan and electric cooker, you do not hear the gasoline engine adsorb the load. That little engine should be struggling just powering the fan. When you add up the wattage of all of the devices they exceed the power capacity of the little gasoline engine. Its certainly a fun video to watch, but it is pure fiction.
This is very true. The guy has access to parts and tools and clearly knows a lot of engineering, yet the power output of the devices he builds is faked on every video. I do like to watch the build process also but I'd enjoy the videos more if he just showed what the thing can really do. I guess this is sadly an easier way to get a bunch of views though :(
When he plug the load, the gas engine keeps the same sound like nothing happened 🤣🤣🤣.
That is what I was looking for, but I couldn't get to why it wasn't changing It's sound. Very good point you made right there.
@Frank Blackcrow for AC, that is where the Variac transformer comes into play.
@Frank Blackcrow ok.
Amazing, the coils are in series with no regard for the polarity reversal on every odd coil. Even more amazing is the connecting the loads did not load the engine down at all. It's like the outlet can't be picked up to plug in devices and unplug them. Entertainment value is good. It would be interesting to see what voltage he could have gotten with every other coil reversed. He had the right number of magnets for the project. If he didn't want to reverse the polarity of every other coil, the number of magnets could have been doubled, so all coils got a South at the same time, then a North at the same time. But the video was made for entertainment reasons, not to generate power.
Ok
I don't understand how the 6 coil transformer work. it's 220 each coil? would it be over voltage? because the microwave is 220 coil? or the transformer is only 40v and the big one he not use is 220-240v ? he put it in series. so if it am not use the gas engine to run but use another motor like a table or Stand Fan and use that as a motor to run the magnet wheel. Then how do I keep the constant the same volt? do I needed another Electronic device to regulate the electrical outlet for home use safe for computer? that's the question ?????
Exactly there are a lot of fake videos on youtube just for the likes and views , it's a pitty for those who spend money to build these shit.
@@pgiesbers68bạn hãy học giỏi môn vật lý thì bạn sẽ hiểu được nguyên lý hoạt động của nó
Ac no worries for the polarity
Ахахаха! Такого прикола я еще не видел! Зачет. Наверняка кто-то поведется.
The only real part in the whole video is probably when he accidentally yeets the fan in the river lmao
Saludos desde Risaralda Colombia, estupendo su invento.
Gracias por compartirlo.
Привет!я из далёкой страны Украина.но сам Я русский! Благодаря тебе,я понял что физику в школах вы не изучаете))как ты мог в это дерьмо проверить,мой далёкий друг?))
If this generator was to have 8000W capacity, it would require an engine with a maximum power above 10HP, and moreover, that the engine used in this movie is much too weak, pay attention to the fact that when turning on the next electric energy receivers, the engine will not gives the slightest sign of any load. Conclusion: a hidden power cable from the mains for
U r wrong, read paramhans tewari patent on Lenz less generator.
If he would just use his 220. V. Welder on the new generator then I'll be impressed 👍😁
I agree , when he plugs the 220 water pump in theres no load on generator at all , also hes plugging a 120v fan and a 120 volt air cooker into the same plug ,,...amazing huh
@@overunityinventor its all about magnetic field ideas,,
What an amazing genius. Makes you wonder why these brilliant inventions never catch on.
🧐 Какой "мощный" моторчик, даже при увеличении нагрузки на генератор обороты на нём не падают, да и ремень 💪 сила 😂😂😂
Ну да. (Натяжка ремня, зачем. Шкив на мотор от косилки, тоже, зачем. Биение двух железных блинов на валу, вуаля висис магия, склейка и биения нет. 200вольт, ээээ.... сила тока, да собственно зачем. Ведь забирает всю мощность водяной насос. Ну и моё любимое: Привариваем подшипники из закалённого металла и друой его структуры, ну понятно почему обороты маленькие, это так всё здорово разлетиться). Не гонит беса, купит пусть генератор бензиновый. Шум тот-же и микроволновки все свои старые разбирать ненадо, ну просто потому, что генератор стоит дешевле 4 микроволновок.
@@supertehno2965 там принцип из говна и палок. Ремень с резинки трусов..
@@user-ug6gy1lt7k надо было ремень из гандона сделать, в два раза бы мощность поднялась 🤣🤣🤣🤣
в пять раз
Нанотехнологии ёпта.
Сказочно красиво получается, П то, что сварка закоротила пластины сердечника, всё нормально
Swap the two wheels from the drive. The big one to the engine, the small one to the generator.😉But then build a power storage device, as well as voltage and current regulators in between.
I don't understand how the 6 coil transformer work. it's 220 each coil? would it be over voltage? because the microwave is 220 coil? or the transformer is only 40v and the big one he not use is 220-240v ? he put it in series. so if it am not use the gas engine to run but use another motor like a table or Stand Fan and use that as a motor to run the magnet wheel. Then how do I keep the constant the same volt? do I needed another Electronic device to regulate the electrical outlet for home use safe for computer? that's the question ?????
Seeing people "fight" in comments is hilarious : "yes it works ! " VS "no it cannot work ! that's impossible ! "
But the guys giving advices to "improve" that fake nuclear powerplant are priceless !!! 🤣🤣🤣
Ещё один шаг и мы покорим просторы галактик!😆
@Vitan Xaos Ради просмотров .
Moving the magnets closer to the coils by increasing the rotor diameter would increase efficiency.
Great effort!!
Keep it up.
Moving the coils closer to the magnets by setting them to the front of the beds in this device , would increase voltage. The magnets set in resin where static and nothing could be moved in this set up where the magnets are fixed in this set up . Either way the man is a genius making this device from microwave coils anyway.
The generator is a low torque design. In more efficient designs turning the magnet rotor by hand would be very hard and more so under load. The belt used was obviously designed for a low torque operation also. Less gasoline consumption and smaller engine requirements.
+ Double up on the coils per E, wired in parallel, along with much much bigger neodymium magnets. Might as well add a bigger diameter pulley on the motor while we're at it...
@@sempertard actually a Magnetic gearbox would be far more efficient
This is more about a Steady Speed of Rotation rather than " Load " minds how a Marx Generator works
@@mjolnirswrath23 Hmmmm... I had to look into that. th-cam.com/video/PyBTE5cjGDY/w-d-xo.html
Wow, I am in violent agreement with you. Scrap the gears and chain, and put the motor and generator inline with a mag gearbox. Well done sir!
Fantastic. To achieve this with limited tools. Very ingenious. When the world economy collapses this type of people will be survivors. Well done!
I love it how these guys on TH-cam can do these things in an hour that would take me a week if I'm lucky
я бы никогда не догадался что подшипники можно просто приварить к пластине намертво...
Теперь мы знаем что так можно было))))
@@user-lr2vd1te7tа что реально так можно было 🤣🤣🤣
I've done something similar in Northern Sri Lanka many years ago. Usually a 2-stroke engine will slow down when you put a load into the dynamo! You should be able to hear the sound of the engine's rpm slowing down. Something doesn't add up with his demonstration :)
ну хоть Вы сообразили🤝🤝🤝
You are correct. It is totally fake. The concept is OK, but the execution of magnet mounting/spacing/wiring stinks.
yes I thought the same thing too
Correct! This is a confidence trickster! Prove me wrong! There is a sneaky power connection through a cable buried in the mud under the electrical socket. Share a new video with the connector pulled up off the ground, and passing your hand underneath (with this running) The poster is only interested in being paid by TH-cam for AD money from many clicks.
@@pstonard seems the pump is always the 1st plugged in and it looks old and bulky enough, replace the guts with modern tech and stash a battery (maybe)
When the load is connected, there is no drop in engine speed and the tone of the entire structure does not change. Deception.
You need to be VERY careful taking transformers out of microwaves. The magnetrons often contain beryllium in the insulators which looks like ceramic, but it can be very toxic if the insulators get broken and the dust is inhaled.
Just so you know.
good to know...a splinter of beryllium can be very dangerous also.
Only if you don't gave an Intelligent Immune system due to over sanitation , I've inhaled fiberglass, Asbestos smoked for 28 years and every Kond if Chemical Toxin you can imagine, battery acid tickles,
I'm in Perfect Health , I'm a custom carpenter and work in 100+degree heat and minus temperatures
Carrying in excess of 50- to 70 Pounds of tools while having perfect balance on ladders, beams, walls trusses etc..and expertly wielding power tools and sharp pointy objects all day long while having FUN doing it...I NEVER get sick either NEVER tested nor Jabberwockied
Besides Beryllium is Rarely used anymore not since the 70s in Microwave Magnetron assembly..
And is Color Coded...Ceramic is Widely used now days.
@@mjolnirswrath23 Good luck when you hit 60.
@@mjolnirswrath23 some people should just stay home..safety & regulations are costing the industry thousands for some rtrd that stupidly killed him,her self. so we all have to pay..clipboard worriers.. guy across from our site,,stood on a noggin, to get to the truss,,2nd storey,,he fell,,we went home before all sites got checked & closed down.. its the 1 sheep syndrome.. proper education, common sense, doesnt exist anymore..
Ja sam udiso neznajući štaje😢
китай великий. автор молодец, умелец, отличный режиссёр !!
Стал ещё больше. Территории эрефы проданы. И ещё заберут. Сибирь и Урал
Не знаю генератор еак,но руки помыл,и ноги потом подключил мокрыми руками вентилятор,и скороварку,и из жопы достал ложку,и отведал кашицы,вообщем супер видос,держи лайкос😂
:D:D:D
@@iraklitsurtsumia4391 🤣😂🤣😂 👍
This guy clearly knows alot about engineering, but nothing about pollution.... the way he threw the broken fan right through the nature. Let's go, throw this on the wild!
Молодец👍, показал как выйти из сложившейся ситуации. Всё тоже самое сделать без двигателя для триммера 🤘 автономная работа генератора
It is for you to measure the output and consumption voltage. Thanks
I was took by surprise when I saw the coils being connected in series, I suppose it would be connected in star or delta. Anyway I love your generator. Best wishes from Pelotas-Brazil.
🤣🤣🤣
I from Thailand
If the rotor had 2 poles. With 6 poles on rotor it is one-phase alternator.
Running things without knowing. No voltmeter, ammeter not safe.
@@askal1968 да потому ,что это фальшивый блогер,которому чужды знания законов физики,да и механики тоже))
Good Scam, keep it up😁
Чудеса, без выпрямления готовые 220 выдает. И даже ремень не проскальзывает при включении нагрузки.. Снимаю шляпу.
Стесняюсь спросить, а для чего нужно выпрямление при генерации переменного тока ?
Thanks to Cantina down there. To add insult to injury, the way he dismiss things, like trashing the broken fan in the field next door! And the way he dismiss parts like the two bearings, and then they reappear a little bit later. And I would have like to see a voltmeter and an ampermeter with a known load to show us the miracle to produce 220V just because the 6 transfos primary were 220V . They are really very good in recycling in Vietnam !
Correct! This is a confidence trickster! Prove me wrong! There is a sneaky power connection through a cable buried in the mud under the electrical socket. Share a new video with the connector pulled up off the ground, and passing your hand underneath (with this running) The poster is only interested in being paid by TH-cam for AD money from many clicks.
Только запустил "ЭЛЕКТРОСТАНЦИЮ" а рис уже готов, отлично. Пи...дец!
Он же его просто грел.
Судя по тому, как он сложил магинты в пачки по 3, там и магнитного поля-то почти нет. Видимо, он в детстве магниты не ломал.
@@firuzpulatov7750 отвертка прилипает, значит что то есть. но походу у него генератор сам по себе, потребители сами по себе. как минимум его веревочка которая изображает ремень, не выдержит никакой нагрузки. да и нагрузки, говорят комментаторы, никакой и нет..
Чтото странное на мой взгляд. Каждая катушка расчитана на 220 вольт, их в генераторе 6 штук, все они подключены последовательно. Это значит около 1320 вольт. Катушки необходимо было соединять паралельно на 2 фазы. Каждая катушка через одну спаивается в паралель, симетрично по контактам намотки направления. Катушки ставятся близко к магнитам. Надо было срезать лишний метал трансформатора. Идут сильные потери магнитного поля, слижком длинные штыри трансформаторной стали.
You still have to buy gasoline fuel to make ut work. Maybe build a windmill for it, so the wind can turn the shaft. That way it would work free.
Isso é fantástico.parabens
Pena que nao é verdade
@@raibuzatto9565 e por que não seria verdade. se magnetismo existe ele pode ser usado para gerar eletricidade.
creative ideas, determination, work, yields satisfaction in a man's heart , good work mate
Se vuoi aumentare la potenza di questo tuo generatore di corrente basta solo che tu riduca lo spazio tra i magneti che girano e la parte in ferro dove è avvolto il rame. Ti faccio un esempio se adesso ci fosse 20 mm e il generatore ti generasse 200 W e tu modificando tutto da 20 mm questo spazio lo riducessi a 2 mm la tua potenza da 200W andrebbe a2000W capito
I think it would definitely generate some power, but the efficiency would be terrible, the waveform or hertz would be completely messy and so inconsistent, the voltage and amperage spikes would be crazy as well. So plugging anything into this mess depending on what it was might work, but barely and it wouldn’t last long. Say just a fan for example would probably spin, but not very fast lol and over time the motor or starting cap would fry from all that noise. As for load on the motor and why it doesn’t bog down… it’s probably not even close to efficient enough for a noticeable difference. Loading it down to much would just overheat those janky wires and fry it.
И еще при такой нагрузке тоненький передающий ремень не буксует?
Plugs in rice cooker.
RICE IS ALREADY COOKED, LMAO.
I cannot stop laughing when i saw the fan ended with blade broken and been thrown away 🤣🤣🤣 anyway good effort and genius..
😂😁🤣 LOL
Power for appliances does not come from this goofy MOT generator contraption. The actual power supplying the electrical box is buried underground.
Это точно! Тем более, что ротор сделал из железа которое тупо замкнуло электромагнитное поле! Наебалово!
Bạn chưa hiểu về nguyên lý của nó
Hihetetlen, hogy ezt, hogy a frászban tudják így megcsinálni! A környezetük és az öltözetük alapján szegények, viszont a technológiai hátterük, meg egy jómódú hátteret mutat. ÉS hulladékokból barkácsolnak frankó kis holmikat, amik rozsdásan, zörögve és csattogva, de működnek! 😮🤯
I LIKE HOW CREATIVE YOU HAVE BEEN
BS welding the transformer laminations staring away reduces efficiency by bypassing the whole reasons for them. Laminations are there to stop eddy current losses.
Двигатель автомобиля имеет гораздо большую мощность, и при этом включив обогрев заднего стекла при включеных других приборах меняет число оборотов
+ почему катушки стоят последовательно? =) когда они и так на 220
@@artem_z6675 этому можно найти объяснения, одна обмотка не смогла развить нужное напряжения, слишком малые обороты и слишком большие зазоры между магнитами и обмотками.
Натяжка ремня шикарная😀
Спасибо большое, посмеялся от души 🤣🤣🤣
знатный троллинг!
Резинка от трусов в качестве ремня :)
I have done mine slightly differently. I used the magnets from the magnetron of the microwaves. I also have 8 transformers, not just 6 welded together. Instead of one row I have 3. It’s also driven by an electric motor from a washing machine that is fed by the generator, with 240 going into the wall socket 24/7. The hardest part was getting all the microwaves with the same size transformer and the right motor from a washing machine. The generator in the video seems to be a fake, but the concept is sound.
King Homemade is brilliant at making generators. His skills and teaching much appreciated. Thank you for showing us how to become self sufficient where possible. My best wishes to you take care out there.
It's fake dude can you not tell? It's amazing what people think is real these days.
@@raycert07 I doubt seriously if he could get enough wattage with that thin drive cord to drive even one of the devices, except possibly the fan. Look at the large belt driving an automobile alternator - and how tightly it is stretched to keep it from slipping. And that is under 14 volts and maybe 30 amp.
Wrong! This is a confidence trickster! Prove me wrong! There is a sneaky power connection through a cable buried in the mud under the electrical socket. Share a new video with the connector pulled up off the ground, and passing your hand underneath (with this running) The poster is only interested in being paid by TH-cam for AD money from many clicks.
I can not see it making that much power with how slow it is turning I can say it LOOKS GREAT
It is turning quite fast. It looks slow because of the frame rate of the camera interfering with the RPM of the generator. This also seemed to make the fan blades turn slowly too.
Same effect of fps of cam vs blades that you see on helicopter blades on tv.
The iso rate of the camera was matching the speed of the motor
Sahte bir düzenek yalan .
Jeśli się dobrze przyjrzeć to przedłużacz jest wkopany w ziemię i jak chłop wyciąga wtyczkę to jakoś mocniej grawitacja działa na gniazdka 😁😁
ESSE SIM FUNCIONA. PARABÉNS
May be useful if you need irregular frequence and voltage output.
Since six MOTs, make it 6 phase AC... 😜 Seriously, any voltage sensitive loads would have burnt out easily... The idea is good and on low budget, but the usability is questionable. You need to add control and stabilization features to it, at least put simple output metering device...
sure, a voltage meassurement would be nice on eache phase, add a flywheel for load balanceing compensation ;) nice work, i like the design :)
@@hhhhhh7777ttt the iduced voltage is a function of rotational speed, you can not calculate the "mains" power you normaly apply to a MOT by addition this 6 times :)
@@hhhhhh7777ttt each pole would be opposite polarity from the next by wiring them in series you get no output since they cancel each other out. Also that belt would not handle the load and the tiny 2 stroke engine might make 500W at best, not 8KW. You can also tell its a fake because the engines load does not change at all as more electrical load is added, also the power strip is conveniently hidden so we cant see where the actual power is coming from.
@@RC-nq7mgBeat me to it 😀
Hi, I looking for advicer, i saw your answer I think you are right.
Maybe might you send your e mail? Thank you
you showed me how to survive whether people know it or not May your God keep blessing you for you are truly a King in my eyes!!
your extremely smart. love the way you think!!!
Gostei muito parabens!
Pd
altho that might actually work if you don't know what rpm to run the motor at you might either over or under voltage and blow up all your equipment
Pick up the fan from out of the Bush And recycle Otherwise that was some good work
Я так давно не смеялся! )))))))
Ахаха насмешил:))) эта установка полная шняга!!!
Efforts, dedication always yields best fruits and many smiles to all lives on this beautiful Earth 🌎
Beautiful flat earth
@@fusiondensity3287 🙄😭😠🌍🌏🌎
THERE IS NO WAY THIS HOME MADE ALTERNATOR WITH HUGE GAP BETWEEN MAGNETS AND COIL CAN RUN THIS HALF HORSEPOWER PUMP AND A RICE COOKER. I DONT EVEN THINK THE MOTOR HAS THAT MUCH POWER. IT IS A MAGICAL FREE ENERGY CLICKBAIT VIDEO AGAIN.
Lo que mas me impresiona es que el invento mas importante de este video, ni lo menciona, me resulta increible que solo hablaran de ese motor y no de la bomba de agua tambien infinita y que no importa se tira mucha o poca por que es infinita, gracias
Power your generator by water/wind turbine, then you get clean and free energy.
Надо было написать 25 kwt. 🤣🤣🤣🤣
250🤣
Because of this video I donated money to the Stop the Internet Group. Fantastic!
안녕하세요 반갑습니다 고운인연입니다 친구했습니다 친구합시다 사랑합니다💜💜💜
I wonder why he can't run 3 devices on the generator on the concrete with a walkaround showing everything including current draw and volts? I guess it would be hard to hide the hidden 220v line that actually powers the stuff.. much easier in mud/dirt to hide extra wires.
With this loose belt, no squeeck, no rpm change on load switch. Definately clickbait. This setup if its properly connected, may be, at best, can light a LED lamp.
THE WATERPUMP NEEDS LIKE 700W AND THE RICECOOKER GOD KNOWS HOW MANY WATTS THAT ONE NEEDS. THERE IS NO WAY THIS IS GOING TO WORK EVEN CLOSE TO THIS.
Correct! This is a confidence trickster! Prove me wrong! There is a sneaky power connection through a cable buried in the mud under the electrical socket. Share a new video with the connector pulled up off the ground, and passing your hand underneath (with this running) The poster is only interested in being paid by TH-cam for AD money from many clicks.
The holes in the rotor upset the dynamic balance
Excellent demonstration of DYNAMICS!
Beatiful 👍
Placing the magnets so far away from the outside of the rotor AND placing the stator far away from the rotor makes this so inefficient, a lot of work to blow on them two mistakes.
It's not the main thing for the author, the main thing is to make a video.
@@bigsem32 I see, the best preformance would take little time and effort to do correctly, making the generator much more powerful and efficient. As I always say, if your gonna do it, do it right.
@@bigsem32 hahaha exactly for the sake of content its up for you to believe
Probably using a electric motor (from begining of video) as generator would be more efficient, because it is hard to perform worse than this construction.
try to keep the magnet rotor as close as possible to the stator coils gap to reduce heat and for better current flow. Thanks
I was thinking the same thing when I was watching his TH-cam where he uses 2 Microwave Transformers. I have only a small knowledge of generators and motors and such, so I am glad to hear someone agrees.
Could you please confirm for me that this sort of device would produce electrify? I don’t mean that it would be very efficient, because I think there are several inherent weaknesses, but a magnetic field spinning in a coil of wire will produce electricity.
The gasoline used to run the motor may cost more than the value of the electricity, but that’s another issue.
Another question, if you don’t mind, if he had a bigger coil, as in, if the iron cores were filled with coiled wire, would he produce more current? Or would the size of the coil, in the relatively small magnetic field cause increased inefficiencies?
@@oddjobbob8742 Ask these questions on quora.
@@forhacker7306 thank you that’s a good idea.
ขอบคุณ...คนเก่ง...ทำให้กระจ่างไปทั่วโลก...ของผม 40 ขดลวด...และ...ทำให้ เป็น 50rpm.....
ESO SI ES MUY EFECTIVO NO AY TRUCO LOTENGO COMPROVADO FELICITACIONES ESO SI ES VERDAD
Хороший был вентилятор, больше его не увидим, пичалька
да это разводка, мультиварка в 600 ватт + вентилятор 100 ватт + насос 400 ватт. Ага на однофазном с спаянными вместе пластинками и на шнурочке который порвётся при малейшьшей нагрузке. В лучшем случает 100 ватт даст и то не обороты не выравнивание ничего. Он просто закапал провод и закрыл генератором выход из земли.
Parabéns !
6 cewek 220v połączonych szeregowo bez sprawdzania kierunku nawijania? Pomysł i mechanika dobra. Elektrycznie to nie ma prawa działać 😂🙈
@@______4938 ну зачем так.. пацан к успеху шёл
Он этот вентилятор в поле посадил. На следующий год вырастет три. 😀👍
God bless you, for this beautiful idea, but you could have added the secondary coils to increase the ampere and link it to the branch to increase the capacity of the electric generator to operate several devices, but you are a successful genius I follow you a lot and all your work is excellent. Secondary files Thank you very much.
Where from you are Madjid brother?
Wot a waste of time how u no what 2 do if u just watch it and they don't till u what they doing
@@petercollins4092 Its pretty obvious if you have a basic understanding of how generators work. Maybe watch some videos on how those things work and then you can appreciate what this man has built.
@@nikolatesla811 I have a thorough understanding on how generators work - and it is impossible that contraption could drive even one of the devices, much less all three at once. As a basic example of the many problems, that thin and loose drive belt would not handle even 1/10 HP, which is way less than 100 watts.
Bravo , vraiment c'est de l'energie eléctrique gratuit..!!!..
I hope you were wearing you're safety glasses... Lol.
I was shocked he threw away a perfectly good fan motor, I was expecting him to build a TESLA with it. Maybe thats a future video. All jokes aside I enjoy his videos.
@Nat Art I thought so too. I'm looking forward to his Tesla build.🤣
I'm sure he could have put the fan motor to work.
Plug it into a 110 source to turn the 220 alt.
Gostei guerreiro parabéns
8000 Watts... What a laugh, if you moved the coils closer to the magnets then you could probably get 20,000 Watts to bull$4it us with 😂
I like the way you reveal magic pocket 19:26 😁
You should have added more 220 volt coils to each transformer frame and eliminated open space between the coils and magnets. It would be a lot more powerful and effecient. But great work and love the video. What kind of amperage load or wattage can this support? And what's the rpms on it?
he's MISSING SO MUCH MORE
кустарная сборка, без подшибников, вал сгорит, ни какой центровке. А не легче было поставить генератор от фуры америка на 28в, и три трасформатора 36 на 220 вольт, только надо три фазы через диоды
Bastelmontage, ohne Lager, die Welle brennt durch, kein Ausrichten. Und es war nicht einfacher, einen Generator von einem amerikanischen Lastwagen für 28 V und drei Transformatoren 36 für 220 Volt einzusetzen, es werden nur drei Phasen durch Dioden benötigt
Lots of backseat drivers on TH-cam.
What's been bugging me is how off the math is. In his other video of making generator using microwave transformers here: th-cam.com/video/Jvhy-8Qltj0/w-d-xo.html&ab_channel=KingHomemade
The thumbnail says it makes 7000W to 220V In this video spite adding 4 more lots of coiled wire it still ends up with 220V and only an extra 1000W on top of the 7000W so what was the point of expanding the effort? But because we don't know the rpms and unless the generator is spinning the magnet slower from the other generator he did he should have tripled the previous generator making it 21000W to 660V which could have been even higher if like you said the coils of wire could have either been closer to the magnet or filled out each transformers with more copper coils.
I'm don't know a lot about electricity but the only thing telling me the math is off is that by looking a bunch of articles on google there are 4 major ways to extra electrical generation.
1. More coils of copper wire.
2. Stronger magnet.
3. Lesser space between copper wire and magnet.
4. Faster rpms.
Sorry if there's anything I'm missing out in all this.
@@chuckholmes2075 then you do yourself 🤣🤣🤣
Muito bom .valeu 👍
😁🤣
It's a small heavy work horse.
Scaled up and longated, it would power a neiborhood.
Scared the bejesus out of me, watching him work open electricity next to open flowing water.
Super ingenioso,te felicito
usually there is a noticeable load on a generator motor.
Yeah, the more the load the more the engine boggs down. A voltage regulator is usually fashioned into the circuit for output stability. 🤔
Now all I need is 6 microwave ovens.... 🤪
21:20 there's a wire connection underneath the ground lmao 😂
Top de mais Fantástico parabéns
cara imagina isso com força da agua gerando energia infinita,quase beirando insanidade da capacidade humana! Fantástico mesmo!
😂😂😂
Try to use capital "V" for volts next time and lower case "k" for kilo multiplier, so kilovolts will be "kV", and 220 volts as "220 V". It will give your presentation more professional look.
How would I write 1,000,000 volts?
Prinz Rainer Buyo 1MV (mega volt)
you are wrong capital "k" is for kilo. KV is kilovolts. small case prefix is for decimal quantities. mV for millivotls, mA for milliamps etc at least in NA
Professional presentation...he's cooking rice in a field.
A lot of extra work, it was also possible to connect to a gasoline generator
I love the instant rice cooker.😂
The scientist must invent, discover, and invent propellers that operate on the basis of gravitational energy
No
You're amazing guy. Where you get these all old things?
And why you go that field to run your project? Is that you want to show that the place is off-grid?
yes, there is no electricity here
NICE BUILDING OF A GENERATOR FROM MICRO-WAVE WASTES. KEEP IT UP.
Этот хоть не выдумывал про безтопливный генератор!!!)))
Мотор даже не нагрузился при включении приборов😂👍
И розетка, как обычно, прибита к вскопанной земле.
Прикольно что люди ищут смысл в этой херне . А парень не плохой психолог . Рубит бабло на просмотрах .
Amigo tu é um Gênio parabens.
At least welder has a table to work on stuff lol
the work safe attitude of the home handymen, is eye, an mind boggling ...