Hi-End Floor Standing Speaker Production Process / 落地揚聲器製作過程 (音響製造) - Taiwan Speaker Factory
ฝัง
- เผยแพร่เมื่อ 4 เม.ย. 2024
- Hi-End stereo sperker system manufacturing factory!
How are high-quality yet affordable speakers produced?
Hi, there! Welcome to Lemon Films Channel 😆
If you enjoy this video, please leave a like and subscribe to see more amazing process of food & product✨
Please feel free to leave any comments or questions below. Thank you!
✨Product in This Video✨
ML-802 Speaker／ML 802 音響
*Location information*
雅瑟音響 USHER Audio
usheraudio.com.tw/zh-hant/
#Speaker #Sound #Production #floorstanding #Manufacturing #Process #MassProduction #TaiwanFactory #ProcessingPlant #揚聲器 #音響 #Usher #音響工廠 #揚聲器工廠 #台灣工廠
Primarily handmade, even the speaker driver. Thumbs up to this Taiwanese manufacturer.
Out of my 25 years in the glass business, I have only seen one home that had high end speakers. Now had I said 35 years in the glass business I am sure I would tell you I seen more. But what I see is almost everyone uses bluetooth speakers now. And wow very beautiful and well crafted handmade speaker, I think the only thing I could criticize is the screwing of the circuit board to the enclosure without stand offs
Actually there was a standoff... it looked like foam to absorb vibration and to isolate the board.
Die Arbeiten wie die Büffel ohne Gefühl
@@jimtincher7357 Notice how the board locally flexed once screwed down 12:51 . Inducing unnecessary flex in the brittle board doesn't seem like good practise, stand offs would be better. 10:37 those 2 inductors (coils) should be mounted perpendicular to each other. In their current orientation the magnetic field from one is close enough to induce a current in the other.
I think the professional level of workers is still poor
@@wally7856 maybe its part of the sound design ?
I’m Usher user for 10 yrs, never encountered any issues! Last yr I bought my 4th spk ML802, compare to other I have in the same price, it's an absolute bargain. As a woodworker, those who insist on using wooden mallets are simply not practical. After seeing other high priced spks processes, I must say their crafts is already quite impressive. While there are certainly some details to improve upon, in terms of the finished product and especially sound quality, it's definitely worth it!
$26,000 US for a pair of speakers is an absolute bargain? I'll just go in my basement and chip what I need off my collection of gold bars.
Почти как и я в гараже делаю. Только мегафрезера нет!😁
12:48 A very Hi-End approach. :D
nothing wrong here. The tool they are using to screw it in has a calibrated ratchet mechanism so that the screws cannot be over tightened. The boards are extremely flexible and durable as all modern circuit boards are. Go ahead and try to snap one in half with just your hands... It will easily bend 10 times what you see here with no damage.
@@102AlienJim All decent speakers I had disassembled used standoffs.
タイムスタンプ
0:00 オープニング
0:11 スタート
0:17 エンクロージャー用合板接着工程
0:45 エンクロージャー用合板プレス成形工程
1:12 MC によるエンクロージャー用合板切削工程
2:56 切削加工後のバリ取り工程
3:22 エンクロージャー内装組み付け工程
4:49 エンクロージャー傷取り工程
5:49 バッフル傷取り工程
6:13 バッフル研磨工程
7:02 エンクロージャー外装組み付け工程
8:56 中空コイル製造工程
9:32 ネットワーク組み立て工程
10:45 スピーカーユニット磁気回路組み立て工程
11:10 スピーカーユニットフレーム組み付け工程
11:32 スピーカーユニット振動系組み付け工程
12:31 スピーカー組み付け工程
14:00 スピーカーストローク検査
14:13 バッフル組み付け検査
14:23 測定検査
14:33 完成
所々自信が無い所があるので誤りがあったら申し訳ない😢
Good job 😃
Thank you🥰
The most satisfying tool for me is the air powered caulking (gluing) gun. My right hand asked me "Can we get one?".
I don't know what I'd use it for but I need it lol
@@pattygq I've been weatherproofing a house, going through many tubes of calking, and just thinking about it makes my right hand hurt.
キャビネットの木材は湿度があってもソコソコ良い物が仕上がると思うけど、スピーカー自体はどうでしょうかね？
紙では無く薄膜アルミ素材とか使っているのかな？
Awesome video! In Thailand has Usher importer shop at Fortune 3rd floor. They have many models of USHER spk .
12:48 Плату при таком "подходе" к её креплению в результате механически повело! Не долго будет такой фильтр работать.. В скором времени пайки радиоэлементов дадут микротрещины (холодная пайка) и контакты пропадут. Это уже далеко не высококачественно!)))
Согласен (особенно если паять бессвинцовкой, как делает законопослушный, eu-шный Pro-Ject), солидные фирмы не используют дорожки для сигнала - только кусок ламината как основание для поверхностного монтажа "элемент к элементу".
согласен
Там не пайка, а насрано и вообще кроссоверы надёжнее собирать на скрутках.
@@genaishivatov1737какие фирмы сейчас это делают, подскажите пожалуйста?
Тоже согласен. Китай, он такой Китай. Ширпотреб. Высококачественного ничего не увидел.
As someone watching from the US
• Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job for the community
• It’s good to see how well you understand the design and layouts of the speaker systems to get the job done efficiently - loads of experience is evident with this skilled set of workers
• Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us
• Thanks so very much for posting and sharing!
All the best and God Bless. 🇺🇸
Thank you🥰
Should not max torque the screws in until they are all screwed in..also she max torque the screws on one area only..this puts alot of stress on that one area..good way to stripp screws..u alternate diagonally the application..
Watch some B&W videos, to see what true high-end loudspeaker manufacturing looks like.
First of all your statement is not relevant to My response..I am a mechanical engineer and a hi end audiophile for over 40 years...and be careful about referencing b&w speakers because only the 800 series is manufactured in England and everything else in mass produced in China..and I am not diminishing some of the Qualiry components that come out of China..But emphasing the "mass produced" statement
They didn't show the whole sequence, so hard to tell if she only torqued one or all.
Also, the driver used may be set to only reach a set torque.
Yes, but my point with a heavy driver and a huge magnet structure has a lot of weight centralized initially.so the pull force will be enhanced in that location before the whole driver is installed.also the driver with that much weight should be supported while all the fasteners are attached.Then and only then should they be torqued in a diagonally opposed fashion
@@MuscleBN true, but honestly there is so much wrong in this video that they don't seem to care much...
I own a pair of Usher Mini-Two's that I bought in 2012, the construction is immaculate even for this entry-level model. It still uses pretty much the same curved birch-ply construction and internal bracing done with MDF, except mine is satin finished instead of the polished look of the higher end models. I still listen to them up to this day, the price/performance of these speakers are so good, I think I need to spend at least $6,000 to get something that's noticeably better!
ฝีมือคนใต้หวันเยี่ยมมาก ตั้งใจทำมาก
還有很多小細節可以再 精進！老外就是厲害在越不注意的地方，越是有 畫龍點睛 的音效，以HI END的角度分析。如果以20萬級距內，他是可以跨獎。揚聲器的調音是哲學問題，當你深入了解，其實就是 陰陽太極的對應！個人研究喇叭，超過15000hr才摸出其中的精華處，可惜 音響行業，還是民族性產業，還是很敬佩 創辦人 阿水大師！
Luar biasa .bisa langsung melihat prosesnya.terima kasih
I was honestly surprised at how manual a lot of these processes still are!
Thats technic about 20 years ago by Hans Deutsch, Harman Cardon, JBL, Akai, Sony, Canton asmm.! Hand-Made but very good!!! Taiwan is ecxiting good! Today you'll get the best sound out of small boxes! 😢👋👋👍🏼
四十年前上高中的我組裝音嚮前後級功放搭配的揚聲器就雅瑟音響🔊。突然想起青澀的少年時代…
同感，三十多年前我十七岁组装了CD，场 效应管BTL功放和音箱，两年的零花钱就没了。
以前在台北市漢口街有販賣展示店，不曉得是否還在
This is indeed top craftsmanship! There is only one item I would do differently. I saw that the speakers were screwed down while the cabinets were in a vertical position. I think it would be better if they were horizontal.
Excelente trabajo esa es la razón de tener unos altavoces para salón profesionales tengo un Dali Senzor 7 y son muy parecidos y muy buenos
Trabalho fantástico. Saudações do Brazil.
Завораживает!
Amazing... the best qualitys Made of Taiwan...so beautiful.. enjoy your music with Usher...❤❤...15:12.
saya suka prosesnya.dari indonesia.
ML802一直是我的Hi-END，聽2-3小時都不膩
모든 유닛을 자체제작하는지 모르겠지만 요새같이 분업화된 오디오계에서... 중국 말고도 동양에도 자사 유닛을 만들어서 생산하려는 완성품업체가 있네요. 앞으로도 좋은 제품 많이 만드시고 세계적 명성도 얻으시길.....
Очень приятно смотреть на процесс сборки 🙂👍
Proses produksi speaker berdiri lantai kelas atas
Mantap
This video is so satisfying to watch. Thank you for posting! And I have owned Usher speakers in the past and they are quite warm and special.
Thank you🥰
This is why there is so many people in audio. The profits are insane. I get that it is low volume, but still. The ones being made retail for 14 grand, the taller ones 20. With 1000 dollars in materials and labor, good return.
There are some that are really high value and little to no profits as well, like Philharmoninc Audio and Ascend acoustics. Philharmonic in particular will sell you probably a speaker that costs him like $3K+ in parts and labor but only makes out like $100-200 per speaker
I think pro audio has lower profits and much better engineering. Midfield monitors or even main monitors.
@@ubacow7109 Agree - Ascend puts a lot of money into custom SEAS drivers and laminated bamboo cabinets, while competitors are using MDF and cheap drivers.
@@niceguy100000 I have Kali LP-6 monitors, and they are insanely good for $400/pair. Plus, no amplification is required, which adds even more value.
that's the real bullshit of audiophile audio. price is insane, but such videos confirm there's no rocket science in it. just very well, hand made speaker from decent self made components. definitely not worth these insane money. adam audio monitors (to name of other dozens!!) are relatively well priced and sound just amazing for my needs.
I love this! The way they do epoxy at 11:02 is genius!
I enjoyed this video. The only thing I wonder about is one thing. When you hammer down the bottom and top cabinet pieces into the cast frame? You didn’t press the veneer against the perfectly cut plates. There appears to be gaps that the epoxy or glue filled. I guess because you are looking for perfect linear appearance from top to the bottom. The veneer is cast.
Тяп-ляп как весь Китай! И главное дорого, и потом нет запчастей! Покупайте!!! 🤩🤩🤩
Choáng khi thấy quy trình sản xuất loa đứng cao cấp,loa này mà nghe nhạc thì đẳng cấp
The cabinet forming process is amazing , is that heated connections in the mold?
Parabéns!
Serviço altamente qualificado e de qualidade!
Salvador, Ba, Brasil.
The ply forming of the cabinet looks a bit rough...lots of air gaps in the laminates?
I bet the pressure used in that hack is much greater than it appears. Once machined you don't see gaps.
Biz teşekkür ederiz.Guzel ve temiz bir imalattı.Bizde hirdavat piyasasında taiwan ürünleri her zaman en üst seviyededir.Kalite BAKIMINDAN.Çin daha sonra gelir..
過去我是從事音磁規，音圈，音模全世界最大的被動元件生產商，難得有機會能整體看完音箱生產。
Наколенное производство... Особенно порадовала работа электродрелью, как дядя Миша в гараже... )))
Parabéns pelo belo trabalho .
It's 2X speed time!
None the less, nice vid
The amount of work done by hand is impressive.
Thank you🥰
I love the zero guard cnc. It's as if tools never suddenly explode or machines don't randomly crash, cause tools to explode.
OSHA would love this place.
no gloves, no masks, no vacs on sanders. I've seen people forging liquid metal in India in bare feet too so I guess it's all relative 🤔 😳
I enjoyed watching this video .Some good production techniques. I used to work for Duntech Audio back in the 80s and wathing this brought back a lot of good memories.
Showing the process awesome
Amazing process, highly precise and durable
Vraiment Excellent Merci
What an amazing experience watching these quality built speakers with such care and a love for craftsmanship!
This is high-end indeed.
I wonder if this is Taiwan 🇹🇼
Thanks and good luck for continued success.
Yes it is Taiwan
Yes it is Taiwan
@@tan3072 Thanks.
Thank you🥰
Шикарно!
Красивое👍
分频器看起来可以，音箱里面用什么吸音材料？
Респект и уважение вам за ваш труд
да какой там труд, всё станки делают, ну единственное металлическим молотком забивают деревянные составляющие - это пздц конечно!
@@iiiuravi съезди помоги, пацанам неграмотным, научи их уму разуму )
I’ll stay with my 1974 Altec Lansing 150 # a pc speakers 15” woofers, horn mid range, horn high freq. all Alinco magnet. Range 10hz to 20 kHz 110 db 1 watt at 3 meters. Low volume to 100 watts just sounds beautiful, superb imaging outstanding voice of all instruments, saxophones are dreamy. sware I can hear the horse hair against the strings when I play orchestra, play Metallica. It’s like being surrounded right on stage with them. Very sweet for 50 yr old speakers
These are $15k but that’s the beauty of audio equipment, if you’re happy with your sound then stick with it.
After a certain point it’s all subjective anyways.
We care
You are absolutely not getting close to 10hz with vintage altecs lol. maybe down to 40-50hz. Not talking down on altec, just want to correct that
@@remiremillard8419and certainly not at 110dB one watt at 3m lol
Piękne głośniki, gratuluję, chociaż w 12;50 trochę zabolało :)
Since 1972'...WOW
One year younger than me 😊
Congratulations, and good job !
looks like they take great care and produce well made product. good work
台灣之光
台灣的音響剩下沒幾家
那些电感線圈什麼的等等绝不可用紅色的會影響低音及音質遍尖最好是咖啡色或更好的是黑褐色的音質低音優
Шедеврально!
The speaker was designed to give the most optimal sound performance in all audible frequencies.
13:17 the screws cannot be tightened without manually baiting for a couple of turns. as a result, the thread will be cut off.
哇，真棒。来自印度的问候。
Brand is from Taiwan ....Usher!!
Anybody else cringe when they screwed in the crossover PCB directly to the wood without any standoffs and it warped because they provided no clearance for the through hole soldering underneath? 😬
Stunning . many thanks
Thank you🥰
Proses yang sangat bagus🧐
Очень трудоемкий ручной процесс, но результат стоит этого 😊
Una obra de arte esa corneta
不错不错，我们大陆也学习一下😘
que espectáculo los altavoces pero mas la elaboración
Superb!😮
Very well crafted. I wish if the same can be shipped to India. Now, with Bluetooth speakers there are less wires seen in the homes. Great work.
What torque do I apply to screw threads?
…Yes
Soldering skill ? What soldering skills?
soldering iron is too big
I've never ( cough) put a screw through a foam surround... Those cabinets are beautiful!
Sungguh luar biasa 👍
Nyimak dari Indonesia ❤
Maravilloso🤘🇨🇱🤗😇
I'm not sure the crossovers are getting some good attention. The boards were bending as they are tightened down. I wouldn't trust that not to develop a problem. So much for high end. Nothing like TAD speakers that are true high end.
12:50 yep...
Agree, that didn’t look very professional.
@@ChicagoRob2 for cheap speaker would be OKAY but not for those "HIGH END" speakers they ask like 10k for!!!
AND those workers MUST NOT wear ANY jewelry while assembling speakers!! what a shame!
Yep, audiophiles criticise mass production, but tolerance would be much tighter than shown here... seal are kind of random and probably differ from speaker to speaker
they suspiciously look exactly the same as the top of the range Bowers nd Wilkins speakers manufactured in Worthing UK
Спасибо вам огромное.милиардов лайки мало.успехов в торговле.
Лично мне понравилось.
Если у меня ьыл денги много ,я с удовольствием купил для себя.
Попробуй скинуться с соседями, они тебе денег, а ты им музыку. Да погромче.
用这样的方式生产，产能肯定不会过剩。这我就放心了。
高端客戶就愛手工的 市場決定
国内实在太卷了
@@user-it7ds3px6b 是的
10k that's impressive.
Wowwwww... What a. quality ❤❤❤
Lovely Lovely Lovely Lovely Lovely Lovely
I love to assemble electronics and could solder all day long
看到雅瑟，我也買了一套音響，並想起個人當年的幸福感，如今卻都....，唉！
nice looking speakers.
2:06 saw dust extraction would be nice.
Супер
Я делал клон из полочников Usher S-520😊
А как же безэховая камера? Можно и в цеху замерить АЧХ?
*user-eq9ym3xj8t...* Видимо большой объём цеха позволяет обойтись и без специальной камеры. Получается вполне и цеха достаточно. Да и существует же определённый допуск погрешности.
Подбор динамиков, схема кроссовера, АЧХ, ФЧХ и чуйка - все делается и измеряется на стадии проектирования на прототипах в правильных условиях. На стадии серийного производства достаточно убедиться, что все компоненты работают правильно, т.е. при сборке никто не перепутал провода/полярность и на плате все штатно. Для этого камера не нужна, можно делать в любом помещении.
Здесь,после производства,производится только замер ФЧХ!Нет необходимости мерять АЧХ,которое закладывается и вымеряется на стадии проектного производства.А для измерения ФЧХ нет нужды в безэховой камеры.
Great video. How much will they cost coming out off these factory? The price in the hifi shop is 14.300 dollar in the U.S.A.
price in Taiwan where the speaker is made, this unit is about 6,000 usd sold directly by Usher.
i guess shipping / import tax / foreign dealer margin will affect the final price in different region. but same thing applies to all things when comparing between domestic or import goods.
This speakers ain't worth more than 500 a piece. Shit quality from start to finish. I'm stunned they actually make vids to expose their awful speakers.
@@allenlee2670 I think 600 dollar each.
@@DMalek I don't think so.
独特なスピーカーコーンしてますねネットカバーも無いしホコリとか溜まったら掃除し辛そう
Премиум производство на скобках? Я чего то не понимаю
@14:10 that test made my sub work
Класс👍! Мне на такие колонки не заработать😢
Impressive! :-)
Sensacional, excelente!
Marvelous excellent craftsmanship 👍